arXiv subjects

Mohamed-Slim Alouini

Publications and source records attributed to Mohamed-Slim Alouini.

At least 19 recordsLinked to original sources

arXiv2026

Integrated Discovery and State-Aware Servicing for Mobile AUVs With UOWC: Modeling and Performance Analysis

Underwater wireless optical communication (UWOC) is an enabling technology for high-throughput subsea networks, yet its long-term deployment is constrained by the finite energy budget of underwater nodes. To address this challenge, we investigate a mobile system wherein an autonomous underwater vehicle (AUV) performs joint wireless information transfer (WIT) and wireless power transfer (WPT) for a network of randomly distributed sensor nodes. This paper develops \textcolor{blue}{an integrated mission-level framework} that combines stochastic node discovery with state-aware servicing. First, we present an analytical model for node discovery based on a signal-to-noise ratio (SNR) analysis, deriving performance metrics that include the probability distribution of the discovery distance. Second, we introduce \textcolor{blue}{a threshold-based scheduling framework}, termed State-Aware Optimal Point Servicing (SA-OPS), which \textcolor{blue}{selects one of three actions according to the node's real-time energy state: preemptive charging, communication followed by charging, or communication only.} Simulations and multi-criteria decision analysis show that, \textcolor{blue}{under the considered assumptions and parameter ranges}, SA-OPS can improve the tradeoff between AUV energy expenditure and network-wide energy health relative to the adopted baseline strategies. The results also indicate that the selected charging threshold can be approximated by \textcolor{blue}{a simple state-dependent heuristic}, providing a practical guideline for autonomous energy replenishment in underwater networks.

eess.SY↗

arXiv2026

Interference Management in Reverse TDD HAPS-Ground Networks: A Large System Analysis

High-altitude platform stations (HAPSs) are expected to coexist with terrestrial networks (TNs) to provide seamless wide-area wireless connectivity in future sixth-generation (6G) systems. However, the strong line-of-sight (LoS) propagation of HAPS links introduces severe cross-tier interference under spectrum sharing. This paper proposes a reverse time division duplexing (RTDD)-based transmission framework for integrated HAPS--TN systems, where the HAPS and terrestrial base station (BS) operate in opposite transmission directions to mitigate cross-tier interference while preserving TDD channel reciprocity. Standardized 3GPP channel models are adopted for both HAPS and terrestrial links. To enable tractable performance analysis, an analytical Kronecker channel model is developed to approximate the empirical 3GPP terrestrial BS channel, based on which a random matrix theory (RMT)-based large-system analysis is established to derive deterministic approximations for the uplink and downlink signal-to-interference-plus-noise ratios (SINRs). Numerical results demonstrate an excellent agreement between the proposed analysis and Monte Carlo simulations. Moreover, the proposed RTDD framework effectively suppresses cross-tier interference, achieves near interference-free performance.

eess.SP↗

arXiv2026

Hierarchical Edge Computing in SAGSIN: Multi-Layer Network Architecture and Multi-Level Information Processing

Maritime Internet of Things (IoT) deployments increasingly rely on the space-air-ground-sea integrated network (SAGSIN) to connect underwater sensors with terrestrial and space backbones. However, the heterogeneous links along this path, ranging from bandwidth-limited and energy-hungry underwater acoustic channels to high-capacity optical links above the sea, make the transport of massive raw sensing data costly in both latency and energy, and difficult to sustain for unattended, battery-powered nodes. This article presents an edge-computing paradigm for SAGSIN built on two coupled ideas: a Multi-Layer Network Architecture (MLNA) that organizes the underwater, surface, aerial, and ground/space tiers, and Multi-Level Information Processing (MLIP) that progressively refines data from raw measurements toward compact, event-level representations as they ascend the network. We characterize the computation, transmission, and storage energy at each tier and show how distributing refinement across layers trades local processing cost against transmission and storage savings. We then discuss how MLNA-MLIP reduces latency, strengthens data privacy, improves service reliability, and manages energy to prolong network lifetime. A case study on offshore monitoring quantifies the resulting lifetime gains and identifies the optimal processing depth. Open challenges and future directions are outlined.

eess.SY↗

arXiv2026

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

cs.NI↗

arXiv2026

Virtual Backhaul Connectivity for Enhanced Coverage in Fiber-Less Areas

This article provides an overview of potential alternatives for providing wireless backhaul in regions that suffer from the lack of fiber optic-connectivity to the core network. These regions can be rural and remote locations, low-income neighborhoods in urban and suburban regions, and post-disaster locations suffering from the destruction of cellular infrastructure. For these scenarios, extending fiber optic cables to such locations might be extremely expensive, impractical, or simply not feasible. Hence, in order to enhance the backhaul connectivity in these scenarios, we study the potential and applicability of the integrated access and backhaul (IAB) technique, and a hybrid combination of IAB and non-terrestrial networks (NTN) that includes high/low altitude platforms (HAPs/LAPs) and low earth orbit (LEO) satellites. We conclude this article by discussing the design considerations and potential research problems that would enable efficient deployment of such solutions.

cs.NI↗

arXiv2026

Foldable Antenna Array in Space-Air-Ground Integrated Networks: Architectures and Applications

Space-air-ground integrated networks (SAGINs) integrate heterogeneous platforms with different coverage, mobility, and payload constraints, which creates strong demands for flexible antenna architectures. Foldable antenna arrays (FAAs) provide a promising solution by reconfiguring array geometry, antenna positions, and orientations through controllable joints or hinges. However, existing studies on FAAs have mainly considered simple folding configurations and limited deployment benefits, while FAAs' architectures and broader potential for SAGIN remain largely unexplored. In this article, we present the fundamentals and architectures of FAA, including folding mechanisms, foldability levels, and functional capabilities. We then examine FAA applications for ground base stations, low-altitude platforms, high-altitude platforms, and satellites, together with their potential challenges and solutions. Finally, we highlight open issues and future research directions, and provide a case study to demonstrate the FAA-enabled communication performance improvement in SAGIN.

eess.SY↗

arXiv2026

Machine Learning for Underwater Optical Wireless Communication Systems: A Comprehensive Survey

Underwater Optical Wireless Communication (UOWC) has emerged as a promising technology for high-speed underwater data transmission, offering significantly higher bandwidth and lower latency compared to acoustic and Radio Frequency (RF) technologies. However, the underwater medium introduces severe impairments that degrade link performance and limit communication range. The growing complexity of these challenges has increased research interest in Machine Learning (ML) and Deep Learning (DL) approaches, which offer powerful tools for channel modeling, signal processing, and system adaptation in ways that conventional analytical methods struggle to achieve. This survey provides a comprehensive review of ML methods applied across the full UOWC system pipeline, covering channel modeling, transmitter design, receiver detection and equalization, link alignment, and emerging applications, including wireless power transfer, semantic communication, object detection, optical sensing, and localization. Finally, we discuss open challenges and future research directions to motivate further work in this rapidly growing field.

eess.SP↗

arXiv2026

Performance Evaluation of HAPS-enabled Coverage Enhancement in Hard-to-Reach Areas

High altitude platform stations (HAPSs) are becoming a key component of future non-terrestrial networks (NTNs). HAPSs can serve a larger area than uncrewed aerial vehicles (UAVs) and offer lower propagation latency, maintenance expense, and energy costs than satellites. A major application of HAPSs is to serve the areas where terrestrial network (TN) deployment is infeasible, especially in hard-to-reach areas and post-disaster areas. For instance, in the Amazon rainforest, the Mediterranean region, and deserts, TN deployment is severely constrained by geographical and environmental conditions. Only areas close to transportation networks or coastlines can be covered, while large areas remain uncovered. Such coverage holes in hard-to-reach areas are typically overlooked in existing literature. Motivated by these realistic cases, in this paper, we use tools from stochastic geometry to mathematically model hard-to-reach areas where cellular terrestrial infrastructure only exists at their perimeter. We propose to deploy a HAPS constellation over this hard-to-reach area to enhance connectivity. For that setup, we derive the downlink (DL) and uplink (UL) coverage performance of the considered user equipment (UE) as a function of the location of the UE inside the coverage hole. Our results show how the number of HAPSs, beamwidth, and HAPS altitude affect the DL and UL coverage probabilities. Finally, we provide multiple useful guidelines for future HAPS deployment.

cs.NI↗

arXiv2026

Real-Time Symbol-Domain OFDM Radar in an OpenAirInterface 5G Base Station With O-RAN Sensing Services

This paper presents a real-time orthogonal frequency-division multiplexing (OFDM) radar embedded in the OpenAirInterface (OAI) 5G base-station process. The radar removes communication symbols by regularized element-wise division and performs range-Doppler processing and ordered-statistic constant-false-alarm-rate detection online without modifying the 5G waveform. The implemented system provides 2.57 m nominal range resolution and 0.28 m/s velocity resolution. Hardware measurements identify and mitigate several implementation-specific limitations, most notably a deterministic carrier-dependent transmit-receive phase rotation on a Universal Software Radio Peripheral (USRP) X300. Selecting a tuning-grid-aligned carrier improves mean-removal clutter suppression from -16.4 dB to 38.0 dB and reduces coherent-integration loss from 19.81 dB to 0.27 dB. The measured processing gain closely agrees with its predicted value. Instrumented worker timing confirms real-time operation, with a conservative 58.4 percent utilization bound and no dropped soundings. A custom E2 service model, E2SM-RADAR, exports detections and a compact slow-time product to a near-real-time RAN Intelligent Controller. Live end-to-end operation demonstrates reliable delivery and supports controller-side tracking, micro-Doppler analysis, and classification. With a commercial user equipment connected on the same carrier, measurements show no measurable difference in downlink throughput estimate with sensing enabled, while the radar sensing bandwidth follows the scheduler allocation. Video demonstration can be found in youtube: youtu.be/GaYAcTJ8RKI

eess.SP↗

arXiv2026

Connectivity of HAPS-Based Solutions for Large-Scale Wireless Networks: A Percolation Theory Analysis

In the era of sixth-generation (6G) wireless communication, numerous applications are expected to be realized, including environmental monitoring, smart agriculture, remote education, security protection, and intelligent transportation systems. These scenarios require large-scale, continuous Internet services in forests, rivers, oceans, and road networks, to name a few, where optical cables are difficult to deploy. High-altitude platform stations (HAPSs) emerge as a promising solution, offering low-latency, high-capacity services while facilitating the establishment of vertical heterogeneous networks (vHetNets) in fiber-less areas. This article investigates three HAPS-based solutions, where HAPSs can serve wireless devices directly or via gateway (GW) networks: the HAPS-to-device (H2D) scheme, the HAPS-to-GW-to-device (H2G2D) scheme, and the hybrid scheme. Leveraging percolation theory, we study the feasibility of large-scale continuous Internet coverage, where the key performance indicator (KPI) is the percolation probability. We discuss the subcritical and supercritical cases in different coverage schemes, and prove that the phase transition from zero to nonzero percolation probability appears when increasing the HAPS density or GW density. Numerical results verify that the curve of the critical condition of the phase transition exists between the derived lower bound and upper bound, which can help reduce the upfront cost of HAPS-based vHetNet solutions.

cs.NI↗

arXiv2026

Power from Space: Coordinated Satellite Charging for Off-Grid Wireless Systems

Satellite-enabled wireless power transfer (WPT) may be a transformative solution for charging Internet of Things (IoT) devices in off-grid scenarios where traditional technologies struggle to efficiently meet urgent energy demands. In this article, we review the advantages and limitations of microwave-based long-distance charging for satellite-enabled WPT. We then introduce our vision of coordinated space-based WPT, where multiple satellites jointly serve networks of ground devices. Potential use cases are presented highlighting application requirements. We evaluate the average received power at the target locations using two coordination schemes and perform a statistical characterization of the power spillover on undesired locations. We also shed light on the performance of inter-satellite laser WPT for different operating distances and transmit-receive apertures of the peer satellites. Moreover, we explore the integration of metasurfaces on satellite apertures and ground networks to boost energy conversion efficiency, scalability, and beam management. Finally, we outline relevant challenges and research directions towards implementing our vision.

eess.SP↗

arXiv2026

Semi-Blind Channel Estimation for Dynamic NTN Systems via Spiked Random Matrix Theory

Semi-blind channel estimation offers an attractive tradeoff between pilot overhead and estimation accuracy in large-scale wireless systems. However, reliable channel acquisition becomes particularly challenging in highly dynamic environments such as non-terrestrial networks (NTNs), where rapidly varying channels and high system dimensionality significantly degrade the performance of conventional covariance-based estimators due to sampling noise. In this paper, we propose a robust semi-blind channel estimation framework for multi-user uplink systems operating in NTN systems. The proposed approach introduces an optimally regularized least-squares formulation that balances training-based information and blind subspace structure. By exploiting the spiked covariance model within a random matrix theory (RMT) framework, we derive a closed-form characterization of the resulting channel mean-squared error and obtain an analytically tractable design of the optimal regularization parameter. The resulting estimator is computationally efficient and particularly well suited to high-dimensional regimes. Simulation results under realistic Third Generation Partnership Project (3GPP) NTN channel models demonstrate substantial performance improvements over conventional semi-blind and training-based estimators.

eess.SP↗

arXiv2026

High-Altitude Platforms Beyond Connectivity: A Survey of Integrated Sensing, Storage, Communication, Computing, and Intelligence

High-altitude platforms (HAPs) are emerging as persistent middle-layer infrastructures for space-air-ground integrated networks (SAGINs), offering a favorable compromise among coverage, latency, endurance, and deployment flexibility. Their role, however, is evolving beyond communication relaying toward the joint provision of sensing, storage, communication, computing, and intelligence (S^2C^2I). This survey presents a unified HAP-centric perspective on S^2C^2I integration. We first review HAP fundamentals, platform categories, and their principal roles in SAGINs, including wide-area access, relaying, backhaul, edge service, low-altitude aerial coordination, and cross-layer orchestration. We then develop an integrated architecture spanning multi-plane connectivity, payload functional splits, and a cloud-edge-HAP space continuum with hierarchical data, control, computing, and storage loops. The enabling technologies are systematically examined, covering heterogeneous RF, millimeter-wave, terahertz, free-space optical, and hybrid links; sensing payloads and integrated sensing and communication; onboard computing; storage and caching; and AI-based orchestration. We further synthesize standardization progress, open software and datasets, testbeds, field evidence, and a four-level evaluation methodology ranging from component validation to mission-level effectiveness. An emergency-response case study demonstrates that joint S^2C^2I orchestration substantially improves conjunctive service availability while reducing feeder-link traffic. Finally, we identify research opportunities in agentic AI, trustworthy autonomy, goal-oriented semantic operation and digital twins, and sustainable, certifiable, and open HAP-native systems. The resulting synthesis provides a coherent roadmap from platform design to network-wide deployment.

eess.SY↗

arXiv2026

HAPS through the Lens of Satellites and UAVs: A Function-Level Perspective on the Emerging High Altitude Economy

High-Altitude Platform Stations (HAPS) operate in the lower stratosphere at 17-27 km, between satellites and Unmanned Aerial Vehicles (UAVs). For this third tier the architectural case has long outpaced the flight evidence, but a wave of 2020-2026 stratospheric flights now permits a direct comparison. We evaluate HAPS function by function across sensing, navigation, and communication, taking operational satellite and UAV implementations as the reference. We define a strict evidence rule, counting a function as flight-validated only on operationally relevant stratospheric data return at or above 18 km, and apply it to nineteen functions. The resulting count is lower than the literature implies: five functions have credibly crossed over (optical Earth observation, hyperspectral imaging, methane imaging, RF/SIGINT, and broadband relay), yet these rest on only four flight programs, with at most one carrying peer-reviewed flight evidence. One function is ground-demonstrated, two are partially demonstrated, three are conceptual, and eight remain unflown. Four engineering domains (size, weight, and power; station-keeping; aperture; and viewing geometry), bounded by an operational envelope of platform stability and payload operability, explain the pattern. The governing advantage is persistence at close range, not altitude. Eight use cases, supported by same-sensor forward simulations, translate the pattern into missions, led by resilient public-safety mission-critical services (MCX). On this evidence, HAPS fits as a persistent regional tier in a multi-tier non-terrestrial network and as the seed of an emerging High Altitude Economy. Carrier-grade service, station-keeping precision, and regulation remain the principal open problems, and we pose the persistent-tier reading as a testable hypothesis with dated 2030 markers.

cs.DC↗

arXiv2026

Agentic AI-Enabled Solar-Powered High-Altitude Platforms for Sustainable SAGINs

Space-Air-Ground Integrated Networks (SAGINs) can extend connectivity, but their communication, computing, and platform operations create tightly coupled energy demands. Solar-powered High-Altitude Platforms (HAPs) offer a promising middle layer by combining persistent regional coverage, renewable-energy harvesting, and onboard computing. However, realizing this potential requires more than optimizing individual links or processors, as radio transmission, task execution, backhaul use, and battery preservation share a common energy budget. Therefore, we introduce a HAP-native Agentic AI framework. It continuously perceives communication, computing, energy, mobility, and mission states; invokes quantitative tools for prediction and verification; and coordinates executable actions through a closed control loop. Then, a multi-timescale design separates fast radio control from task orchestration and long-term energy planning. Furthermore, a disaster-recovery case study illustrates how the framework responds to backhaul congestion, traffic surges, and declining solar generation, improving energy efficiency, task completion, and latency over other baselines. We finally identify trustworthy control, collaborative multi-HAP orchestration, and digital-twin-assisted lifelong adaptation as key steps toward deployable, sustainable, and resilient SAGIN intelligence.

cs.NI↗

arXiv2026

Coverage Analysis of Large-Scale HAPS Networks Using Directional Beams

High-altitude platform stations (HAPS) are pivotal in next-generation wireless networks for reducing core network burdens and enabling cost-effective communication. In this article, we propose a spherical stochastic geometry-based analytical framework for the coverage performance evaluation of HAPS networks. Considering the significant influence of directional antenna gain on interference evaluation, we analyze coverage performance under a general channel model that accommodates various beam patterns. Analytical expressions of the uplink and downlink coverage probabilities in cellular and cell-free networks are provided respectively and their accuracy are verified by Monte Carlo simulation. Furthermore, the influences of network-level and physical-level parameters on coverage probability are studied. Finally, several factors that align with the analytical framework of this article are discussed.

eess.SP↗

arXiv2026

Zadoff-Chu Sequences for Chirp-Domain Communication: Diversity-Complexity Tradeoffs in Doubly Dispersive Channels

Orthogonal frequency-division multiplexing (OFDM) combats multipath-induced time dispersion by dividing the channel into narrowband sub-channels. However, when the channel also exhibits frequency dispersion due to mobility (Doppler effect), these sub-channels lose orthogonality and cause inter-carrier interference that degrades the reliability performance of the communication system. We investigate Zadoff-Chu (ZC) sequences for chirp-domain communication to improve reliability in time-frequency dispersive channels. We show that ZC sequences are the only constant-amplitude zero-autocorrelation (CAZAC) sequences that transform a doubly dispersive channel into a singly dispersive channel that is either pure time or frequency dispersion. This transformation is controlled by the ZC root, which provides a geometric projection from the delay-Doppler domain onto a one-dimensional chirp-domain axis with a closed-form design rule. Because the transformed channel is singly dispersive, the receiver equalizes a one-dimensional convolutional channel rather than a two-dimensional delay-Doppler channel and can reuse trellis-based detectors that generate the soft information that coded systems require. Then, we present ZC-based modulations, derive the effective channel after transformation, and analyze diversity, which reveals an underlying trade-off between diversity and receiver complexity. When evaluated at a vehicle speed of 540 km/h and a carrier frequency of 4 GHz, ZC-based modulations demonstrate performance comparable to affine frequency division multiplexing (AFDM) and orthogonal time-frequency space (OTFS), with gains of about 5 dB over orthogonal chirp division multiplexing (OCDM) and 10 dB over OFDM.

eess.SP↗

arXiv2026

Uplink MIMO Performance Analysis for Diverse HAPS Antenna Array Architectures

High-altitude platform stations (HAPS) are promising components of 6G and beyond networks, where antenna array configuration is critical for achieving wide-area coverage and high capacity with massive MIMO. This paper investigates and compares the uplink signal-to-interference-plus-noise ratio (SINR) distributions of user equipments (UEs) for five antenna array structures, including the cylindrical antenna array, the 3GPP antenna array, the hemispherical antenna array, and two proposed architectures, namely the truncated cone and truncated hemispherical antenna arrays, under uniform, Gaussian, and Poisson cluster process UEs distributions. Simulation results show that both proposed arrays achieve performance comparable to the hemispherical array, with the truncated hemispherical array being particularly effective for densely distributed UEs, while the truncated cone array offers a favorable tradeoff between performance and implementation complexity.

eess.SP↗