arXiv ScienceSearch

arXiv · 2004.05518

Hardware Memory Management for Future Mobile Hybrid Memory Systems

Abstract

The current mobile applications have rapidly growing memory footprints, posing a great challenge for memory system design. Insufficient DRAM main memory will incur frequent data swaps between memory and storage, a process that hurts performance, consumes energy and deteriorates the write endurance of typical flash storage devices. Alternately, a larger DRAM has higher leakage power and drains the battery faster. Further, DRAM scaling trends make further growth of DRAMin the mobile space prohibitive due to cost. Emerging non-volatile memory (NVM) has the potential to alleviate these issues due to its higher capacity per cost than DRAM and mini-mal static power. Recently, a wide spectrum of NVM technologies, including phase-change memories (PCM), memristor, and 3D XPoint have emerged. Despite the mentioned advantages, NVM has longer access latency compared to DRAMand NVM writes can incur higher latencies and wear costs. Therefore integration of these new memory technologies in the memory hierarchy requires a fundamental rearchitect-ing of traditional system designs. In this work, we propose a hardware-accelerated memory manager (HMMU) that addresses both types of memory in a flat space address space. We design a set of data placement and data migration policies within this memory manager, such that we may exploit the advantages of each memory technology. By augmenting the system with this HMMU, we reduce the overall memory latency while also reducing writes to the NVM. Experimental results show that our design achieves a 39% reduction in energy consumption with only a 12% performance degradation versus an all-DRAM baseline that is likely untenable in the future.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fei Wen, Mian Qin, Paul Gratz, Narasimha Reddy. 2020-04-12. Hardware Memory Management for Future Mobile Hybrid Memory Systems. https://doi.org/10.1109/tcad.2020.3012213

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Bi-SamplerZ: A Rejection-Aware Cooperative Gaussian Sampling Framework for Falcon Signature Hardware

We present Bi-SamplerZ, a rejection-aware cooperative sampling framework that converts this idle capacity into useful computation. After an asymmetric accept/reject outcome, Bi- SamplerZ latches the completed logical result and dynamically reassigns the released physical datapath to the unfinished target. The two paths then evaluate fresh independent candidates for the same remaining distribution. We show that this post-rejection cooperation increases the assisted-round completion probability without modifying the underlying candidate distribution or Bernoulli acceptance rule, and we state the randomness-allocation conditions required to preserve the joint output distribution of the original pair of logical sampler calls

cs.AR

A Multi-Engine Dataflow for MoE Decoding on Scratchpad-Based Tensor Accelerators

Mixture-of-Experts (MoE) decoding on scratchpad-based tensor accelerators (STA) is dominated by moving expert weights while the compute engines sit idle. This traffic is hard to hide, because the experts are known only after routing, and hard to shrink without losing quality or adding critical-path work. We present CARDAN, which represents each expert-weight matrix as a vector-quantized component plus a shared-basis low-rank component and co-designs this representation with a multi-engine decoding dataflow. The representation separates expert-common from expert-private work, so the dataflow overlaps DMA with computation on several engines. Across five MoE families on AWS Trainium3, CARDAN matches or improves BF16-teacher perplexity across all five models and speeds up batch-one decoding by 1.15-1.31x over AWS dense MoE megakernels, rising to 1.7x at batch size 16.

cs.AR

Dissecting How Die Scaling Breaks GPU Fine-grained Scheduling

Modern GPUs are no longer physically symmetric. Die scaling leads to both manufacturing-driven floorsweeping and cache and memory partitioning. The former creates chip-specific compute topologies, while the latter causes non-uniform memory access. These asymmetries are substantial. Topology-oblivious compute unit allocation can lead to up to 1.33x performance variation, while remote accesses increase HBM latency by up to 67% and nearly double L2 latency. However, these asymmetries are hidden behind the GPU's logical resource abstractions and can vary across chips. We develop lightweight characterization methods to uncover per-chip compute topology and memory affinity. We then use the discovered information to make existing fine-grained scheduling asymmetry-aware, considering not only how many resources are allocated but also which physical resources are assigned. Across full-GPU kernel execution, intra-application multiplexing, and inter-application co-location, asymmetry-aware scheduling improves mainstream kernels by up to 1.22x, multiplexed LLM inference by up to 14.3%, and avoids up to 1.33x performance variation.

cs.AR