arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2001.04510

A NECTAr-based upgrade for the Cherenkov cameras of the H.E.S.S. 12-meter telescopes

Terry Ashton·Michael Backes·Arnim Balzer·David Berge·Julien Bolmont·Simon Bonnefoy·Francois Brun·Thomas Chaminade·Eric Delagnes·Gerard Fontaine·Matthias Füßling·Gianluca Giavitto·Berrie Giebels·Jean-Francois Glicenstein·Tobias Gräber·Jim Hinton·Albert Jahnke·Stefan Klepser·Marko Kossatz·Axel Kretzschmann·Valentin Lefranc·Holger Leich·Jean-Philippe Lenain·Hartmut Lüdecke·Iryna Lypova·Pascal Manigot·Vincent Marandon·Emmanuel Moulin·Thomas Murach·Mathieu de Naurois·Patrick Nayman·Stefan Ohm·Marek Penno·Duncan Ross·David Salek·Markus Schade·Thomas Schwab·Kleopas Shiningayamwe·Christian Stegmann·Constantin Steppa·Jean-Paul Tavernet·Julian Thornhill·Francois Toussnel·Pascal Vincent
View original source ↗Read source document ↗Export metadata ↓

Abstract

The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is composed of four 12-meter telescopes and a 28-meter one, and is sensitive to gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m telescopes recently underwent a substantial upgrade, with the goal of improving their performance and robustness. The upgrade involved replacing all camera components except for the photomultiplier tubes (PMTs). This meant developing new hardware for the trigger, readout, power, cooling and mechanical systems, and new software for camera control and data acquisition. Several novel technologies were employed in the cameras: the readout is built around the new NECTAr digitizer chip, developed for the next generation of IACTs; the camera electronics is fully controlled and read out via Ethernet using a combination of FPGA and embedded ARM computers; the software uses modern libraries such as Apache Thrift, ZMQ and Protocol buffers. This work describes in detail the design and the performance of the upgraded cameras.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

Terry Ashton, Michael Backes, Arnim Balzer, David Berge, Julien Bolmont, Simon Bonnefoy, Francois Brun, Thomas Chaminade, Eric Delagnes, Gerard Fontaine, Matthias Füßling, Gianluca Giavitto, Berrie Giebels, Jean-Francois Glicenstein, Tobias Gräber, Jim Hinton, Albert Jahnke, Stefan Klepser, Marko Kossatz, Axel Kretzschmann, Valentin Lefranc, Holger Leich, Jean-Philippe Lenain, Hartmut Lüdecke, Iryna Lypova, Pascal Manigot, Vincent Marandon, Emmanuel Moulin, Thomas Murach, Mathieu de Naurois, Patrick Nayman, Stefan Ohm, Marek Penno, Duncan Ross, David Salek, Markus Schade, Thomas Schwab, Kleopas Shiningayamwe, Christian Stegmann, Constantin Steppa, Jean-Paul Tavernet, Julian Thornhill, Francois Toussnel, Pascal Vincent. 2020-01-13. A NECTAr-based upgrade for the Cherenkov cameras of the H.E.S.S. 12-meter telescopes. https://doi.org/10.1016/j.astropartphys.2019.102425

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗