arXiv Science⌕ Search

SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources

Applications of object detection networks at high-power laser systems and experiments

The recent advent of deep artificial neural networks has resulted in a dramatic increase in performance for object classification and detection. While pre-trained with everyday objects, we find that a state-of-the-art object detection architecture can very efficiently be fine-tuned to work on a variety of object detection tasks in a high-power laser laboratory. In this manuscript, three exemplary applications are presented. We show that the plasma waves in a laser-plasma accelerator can be detected and located on the optical shadowgrams. The plasma wavelength and plasma density are estimated accordingly. Furthermore, we present the detection of all the peaks in an electron energy spectrum of the accelerated electron beam, and the beam charge of each peak is estimated accordingly. Lastly, we demonstrate the detection of optical damage in a high-power laser system. The reliability of the object detector is demonstrated over one thousand laser shots in each application. Our study shows that deep object detection networks are suitable to assist online and offline experiment analysis, even with small training sets. We believe that the presented methodology is adaptable yet robust, and we encourage further applications in high-power laser facilities regarding the control and diagnostic tools, especially for those involving image data.

physics.plasm-ph↗

Low Level RF System of the LIGHT Proton Therapy Linac

The LIGHT (Linac for Image-Guided Hadron Therapy) project was initiated to develop a modular proton accelerator delivering beam with energies up to 230 MeV for cancer therapy. The machine consists of three different kinds of accelerating structures: RFQ (Radio-Frequency Quadrupole), SCDTL (Side Coupled Drift Tube Linac) and CCL (Coupled Cavity Linac). These accelerating structures operate at 750 MHz (RFQ) and 3 GHz (SCDTL, CCL). The accelerator RF signals are generated, distributed, and controlled by a Low-Level RF (LLRF) system. The LIGHT LLRF system is based on a commercially available solution from Instrumentation Technologies with project specific customization. This LLRF system features high amplitude and phase stability, monitoring of the RF signals from the RF network and the accelerating structures at 200 Hz, RF pulse shaping over real-time interface integrated, RF breakdown detection, and thermal resonance frequency correction feedback. The LLRF system control is integrated in a Front-End Controller (FEC) which connects it to the LIGHT control system. In this contribution we present the main features of the AVO LLRF system, its operation and performance.

physics.acc-ph↗

Multi-objective and multi-fidelity Bayesian optimization of laser-plasma acceleration

Beam parameter optimization in accelerators involves multiple, sometimes competing objectives. Condensing these individual objectives into a single figure of merit unavoidably results in a bias towards particular outcomes, in absence of prior knowledge often in a non-desired way. Finding an optimal objective definition then requires operators to iterate over many possible objective weights and definitions, a process that can take many times longer than the optimization itself. A more versatile approach is multi-objective optimization, which establishes the trade-off curve or Pareto front between objectives. Here we present the first results on multi-objective Bayesian optimization of a simulated laser-plasma accelerator. We find that multi-objective optimization reaches comparable performance to its single-objective counterparts while allowing for instant evaluation of entirely new objectives. This dramatically reduces the time required to find appropriate objective definitions for new problems. Additionally, our multi-objective, multi-fidelity method reduces the time required for an optimization run by an order of magnitude. It does so by dynamically choosing simulation resolution and box size, requiring fewer slow and expensive simulations as it learns about the Pareto-optimal solutions from fast low-resolution runs. The techniques demonstrated in this paper can easily be translated into many different computational and experimental use cases beyond accelerator optimization.

physics.acc-ph↗

Progress of Diamond Digital Low Level RF

The first version of digital low level RF (DLLRF) for the Diamond Light Source storage ring and booster was developed with ALBA Synchrotron. Six systems have been built so far. Two of them are in routine operation controlling two normal conducting HOM-damped cavi-ties in the Diamond storage ring. A third system is being used for cavity testing in the RF test facility (RFTF). The fourth system is being commissioned to control the sec-ond normal conducting booster cavity. The fifth DLLRF system is being prepared for the third normal conducting RF cavity in the storage ring. A new DLLRF system based on SIS8300-KU with RTM has been developed and tested in the last few years. We are aiming to develop a common platform for the differ-ent RF systems in Diamond, including the storage ring, the booster and the Linac. It will also be our baseline design for the future Diamond II. Firmware, software and supporting hardware have been developed and tested. The Linac version with arbitrary waveform generator mode was tested successfully to generate flat top pulse from SLED in the high power test in the Linac. The stor-age ring version was also tested successfully in RFTF.

physics.acc-ph↗

The LCLS-II Gun & Buncher LLRF Controller Upgrade

LCLS-II is currently in its commissioning phase at SLAC. It is an X-ray FEL driven by a CW superconducting LINAC. The beam injector plays a crucial role in the overall performance of the accelerator, and is critical to the final electron beam performance parameters. The LCLS-II injector comprises of a 185.7 MHz VHF copper gun cavity, and a 1.3 GHz two-cell L-band copper buncher cavity. The FPGA-based controller employs feedback and Self-Excited Loop logic in order to regulate the cavity fields. It also features several other functionalities, such as live detune computation, active frequency tracking, and waveform recording. The LLRF system drives the cavities via two 60 kW SSAs through two power couplers, and thus stabilizes the fields inside the plant. This paper provides an outline of the general functionalities of the system, alongside a description of its hardware, firmware and software architecture, before finalizing with the current status of the project and its future goals.

physics.acc-ph↗

Update on the LLRF operations status at the European XFEL

The European XFEL (EuXFEL) is a free-electron laser in the X-ray range for users. Its high availability is one of the key aspects of the machine. In 2022, it entered in the sixth year of operation. The EuXFEL linac is based on the TESLA superconducting RF technology, operating at 1.3 GHz with an RF pulse length of 650 $μ$s and a repetition rate of 10 Hz. The LLRF system is based on the MicroTCA standard and relies on a high level of automation. In this contribution, we review the LLRF operation at the EuXFEL and the development of new tools and features to improve the monitoring and extend the usability of the LLRF system.

physics.acc-ph↗

Experimental characterization of photoemission from plasmonic nanogroove arrays

Metal photocathodes are an important source of high-brightness electron beams, ubiquitous in the operation of both large-scale accelerators and table-top microscopes. When the surface of a metal is nano-engineered with patterns on the order of the optical wavelength, it can lead to the excitation and confinement of surface plasmon polariton waves which drive nonlinear photoemission. In this work, we aim to evaluate gold plasmonic nanogrooves as a concept for producing bright electron beams for accelerators via nonlinear photoemission. We do this by first comparing their optical properties to numerical calculations from first principles to confirm our ability to fabricate these nanoscale structures. Their nonlinear photoemission yield is found by measuring emitted photocurrent as the intensity of their driving laser is varied. Finally, the mean transverse energy of this electron source is found using the solenoid scan technique. Our data demonstrate the ability of these cathodes to provide a tenfold enhancement in the efficiency of photoemission over flat metals driven with a linear process. We find that these cathodes are robust and capable of reaching sustained average currents over 100 nA at optical intensities larger than 2 GW/cm$^2$ with no degradation of performance. The emittance of the generated beam is found to be highly asymmetric, a fact we can explain with calculations involving the also asymmetric roughness of the patterned surface. These results demonstrate the use of nano-engineered surfaces as enhanced photocathodes, providing a robust, air-stable source of high average current electron beams with great potential for industrial and scientific applications.

physics.acc-ph↗

Digital Low-Level RF control system for Accumulator Ring at Advanced Light Source Upgrade Project

Currently ALS is undergoing an upgrade to ALSU to produce 100 times brighter soft X-ray light. The LLRF system for Accumulator Ring (AR) is composed of two identical LLRF stations, for driving RF amplifiers. The closed loop RF amplitude and phase stability is measured as $< 0.1\%$ and $< 0.1^\circ$ respectively, using the non-IQ digital down conversion together with analog up/down conversion, under a system-on-chip architecture. Realtime interlock system is implemented with $< 2 μ$s latency, for machine protection against arc flash and unexpected RF power. Control interfaces are developed to enable PLC-FPGA-EPICS communication to support operation, timing, cavity tuning, and interlock systems. The LLRF system handles alignment of buckets to swap beams between AR and Storage Ring by synchronous phase loop ramping between the two cavities. The system also includes an optimization routine to characterize the loop dynamics and determine optimal operating point using a built-in network analyzer feature. A cavity emulator of 31 kHz bandwidth is integrated with the LLRF system to validate the performance of the overall system being developed.

physics.acc-ph↗

Optimization of RF phase and beam loading distribution among RF stations in SuperKEKB

SuperKEKB is the e-/e+ collider which targets the world highest luminosity. In recent operation, SuperKEKB achieved a new world record of $4.71\times 10^{34} cm^{-2}s^{-1}$ for luminosity with the beam current of 1.4 A. In the future, the beam current will be increased further to aim at the design value of 3.6 A and much higher luminosity. The RF system consists of 38 cavities (30 klystron stations), which share the huge beam loading brought by high current beam with each other cavities. For beam stability and power efficiency, it is important to distribute the beam loading properly among RF cavities. It is equivalent to adjust the acceleration phase of each cavity. However, it is difficult to evaluate the acceleration phase using only the pickup signal. Therefore, we established a method to evaluate the beam loading balance among RF stations from the RF power measurement for each cavity, and to adjust the acceleration phase. This report introduces the method for evaluating and optimizing the beam loading (acceleration phase) among stations in SuperKEKB, which has a large number of RF stations, and its operation.

physics.acc-ph↗

Sympletic tracking methods for insertion devices: a Robinson wiggler example

Modern synchrotron light sources are often characterized with high-brightness synchrotron radiation from insertion devices. Inevitably, insertion devices introduce nonlinear distortion to the beam motion. Symplectic tracking is crucial to study the impact, especially for the low- and medium-energy storage rings. This paper uses a Robinson wiggler as an example to illustrate an universally applicable analytical representation of the magnetic field and to summarizes four different symplectic tracking methods.

physics.acc-ph↗

Iterative Learning Control -- Gone Wild

Before AI and neural nets, the excitement was about iterative learning control (ILC): the idea to train robots to perform repetitive tasks or train a system to reject quasi-periodic disturbances. The excitement waned after the discovery of "learning transients" in systems which satisfy the ILC asymptotic convergence (AC) stability criteria. The transients may be of long duration, persisting long after eigenvalues imply they should have decayed, and span orders of magnitude. They occur both for causal and noncausal learning. The field recovered with the introduction of tests for "monotonic convergence of the vector norm"; but no deep and truly satisfying explanation was offered. Here we explore solutions of the ILC equations that couple the iteration index to the within-trial sample index. This sheds light on the causal learning - for which the AC test gives a repeated eigenvalue. Moreover, since 2016, this author has demonstrated that a new class of solutions, which are soliton-like, satisfy the recurrence equations of ILC and offer additional insight to long-term behaviour. A soliton is a wave-like object that emerges in a dis-persive medium that travels with little or no change of shape at an identifiable speed. This paper is the first public presentation of the soliton solutions, which may occur for both causal (i.e. look back) and noncausal (i.e. look ahead) learning func-tions that have diagonal band structure for their matrix representation.

physics.acc-ph↗

Implementation of synchronised PS-SPS transfer with barrier buckets

For the future intensity increase of the fixed-target beams in the CERN accelerator complex, a barrier-bucket scheme has been developed to reduce the beam loss during the 5-turn extraction from the PS towards the SPS, the so-called Multi-Turn Extraction. The low-level RF system must synchronise the barrier phase with the PS extraction and SPS injection kickers to minimise the number of particles lost during the rise times of their fields. As the RF voltage of the wide-band cavity generating the barrier bucket would be too low for a conventional synchronisation, a combination of a feedforward cogging manipulation and the real-time control of the barrier phase has been developed and tested. A deterministic frequency bump has been added to compensate for the imperfect circumference ratio between PS and SPS. This contribution presents the concept and implementation of the synchronised barrier-bucket transfer. Measurements with high-intensity beam demonstrate the feasibility of the proposed transfer scheme.

physics.acc-ph↗

Analog Cavity Emulators to Support LLRF Development

The goal of a LLRF system is to control an actual RF cavity with beam. While digital simulations have a place, having an analog circuit to stand in for the cavity can be tremendously helpful in validating hardware+firmware+software under development. A wide range of cavity emulators have been developed in collaboration with SLAC, and LBNL. Cavity emulators are typically based on quartz crystals and frequency conversion hardware. The choice of crystal frequency and coupling mechanism depends in part on the bandwidth and coupling of the cavity it's intended to emulate. Examples of bandwidth range from 800 Hz (SLAC) as a stand-in for a SRF cavity, to 31 kHz (LBNL) for a room-temperature accumulator ring cavity. An external LO is used to tune the emulated cavity frequency. The coupling properties are also of interest if the scope includes emulating reverse power waveforms. LLRF system checks such as closed-loop bandwidth, and determining cavity detuning can be performed interactively and as part of a Continuous Integration (CI) process. This paper describes the design, implementation, and performance of the cavity emulators.

physics.acc-ph↗

Installation, Commissioning and Performance of Phase Reference Line for LCLS-II

Any cavity controller for a distributed system needs a Phase Reference Line (PRL) signal from which to define phases of a cavity field measurement. The LCLS-II PRL system at SLAC provides bidirectional (forward and reverse) phase references at 1300 MHz to each rack of the LLRF system. The PRL controller embedded with the Master Oscillator (MO) locks the average phase of the two directions to the MO itself. Phase-averaging tracking loop is applied in firmware which supports the feature of cancelling the phase drift caused by changes in PRL cable length. FPGA logic moves the phase of digital LO to get zero average phase of the two PRL signals. This same LO is used for processing cavity pickup signals, thus establishing a stable reference phase for critical cavity RF measurements. At low frequencies, open-loop PRL noise relative to the LO distribution includes a strong environment and 1/f components, but the closed-loop noise approaches the noise floor of the DSP. The implication is that the close-in phase noise of the cavities will be dominated by the chassis DAQ noise. The final out-of-loop phase noise relevant to machine operations is that of the cavity field relative to the beam.

physics.acc-ph↗

SRF Cavity Emulator for PIP-II LLRF Lab and Field Testing

There are many stages in the LLRF and RF system development process for any new accelerator that can take advantage of hardware emulation of the high-power RF system and RF cavities. LLRF development, bench testing, control system development and testing of installed systems must happen well before SRF cavities are available for test. The PIP-II Linac has three frequencies of SRF cavities, 162.5 MHz, 325 MHz and 650 MHz and a simple analog emulator design has been chosen that can meet the cavity bandwidth requirements, provide tuning errors to emulate Lorentz force detuning and microphonics for all cavity types. This emulator design utilizes a quartz crystal with a bandwidth of 65Hz at an IF of ~ 4 MHz, providing a Q of ~ 1.3 x 10^7 at 650MHz. This paper will discuss the design and test results of this emulator.

physics.acc-ph↗

MATLAB Scripts for RF Commissioning at the LANSCE LINAC

The linear accelerator (LINAC) at the Los Alamos Neu-tron Science Center (LANSCE) consists of Pre-buncher, Main-Buncher, low-energy beam transport (LEBT), four 201.25-MHz Drift Tube Linacs (DTLs) and forty-four 805-MHz Coupled Cavity Linacs (CCLs). As a part of the upcoming LANSCE Modernization project, low-level RF (LLRF) systems of four 201-MHz DTLs and twenty-six 805-MHz SCLs have been digitized. Hence the net-work-based control of the cavity field and RF commis-sioning are possible. Each LLRF and high-power RF (HPRF) systems have many process variables (PVs) lo-cated on different computer control screens provided by the Extensible Display Manager (EDM). Several MATLAB m-scripts have been developed to efficiently process the necessary PVs while auto-start, ampli-tude/phase calibration, gain tuning of the cavity field feedback controllers, gain and phase tuning of the beam feedforward controllers, and high power RF trip recovery, processes are configured and validated. This paper ad-dresses the sequence of RF commissioning of the LANSCE LINAC from the time of RF-turn-on to beam feedforward control and its relevant EDMs and MATLAB m-scripts.

physics.acc-ph↗

Disturbance Observer Application for the Compensation of the Phase Drift of the LANSCE DTL LINAC Solid State Power Amplifier

The front end of Los Alamos Neutron Science Center (LANSCE) linear accelerator uses four 201.25-MHz Drift-Tube Linacs (DTLs) to accelerate the H+ and H- beams to 100 MeV. Three of the 201.25-MHz DTLs are powered by diacrodes and the first DTL is powered by a tetrode. A 20-kW solid-state power amplifier (SSPA) is used to provide ~15 kW drive power to the tetrode. The SSPA is water-cooled and consists of 24 push-pull LDMOS transistors operating at 45% of their power saturation capability, providing ample power headroom and excellent linearity. However, the phase of the SSPA is perturbed at +/-20 degrees over a few ten minutes partially caused by the temperature dependent phase variation of the air-cooled SSPA driver circulator. This phase variation consumes most of the phase control margin of the cavity field feedback controller. In order to mitigate the effect of the SSPA phase variation on the cavity field, a disturbance observer controller (DOBC) has been designed and implemented on the cavity field control FPGA, which functions in parallel with the cavity field feedback controller. In this paper, the DOBC design and its function as well as its short- and long-term performance are addressed.

physics.acc-ph↗

Chatter reduction in sliding mode tuner controller using skipping surface

TRIUMF ISAC 1 tuning controllers operate using minimum seeking sliding mode controller to minimize the reflected power in their cavities. As with all mini-mum seeking algorithms, chatter present in the control-ler can degrade its performance and cause necessary mechanical wear. By observing the rate at which the minimizing function approaches the sliding surface, it is possible to determine whether a change in direction is necessary, thereby reducing the amount of chatter throughout the minimum seeking process.

physics.acc-ph↗