SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources

arXiv2022

Unsupervised real-world knowledge extraction via disentangled variational autoencoders for photon diagnostics

We present real-world data processing on measured electron time-of-flight data via neural networks. Specifically, the use of disentangled variational autoencoders on data from a diagnostic instrument for online wavelength monitoring at the free electron laser FLASH in Hamburg. Without a-priori knowledge the network is able to find representations of single-shot FEL spectra, which have a low signal-to-noise ratio. This reveals, in a directly human-interpretable way, crucial information about the photon properties. The central photon energy and the intensity as well as very detector-specific features are identified. The network is also capable of data cleaning, i.e. denoising, as well as the removal of artefacts. In the reconstruction, this allows for identification of signatures with very low intensity which are hardly recognisable in the raw data. In this particular case, the network enhances the quality of the diagnostic analysis at FLASH. However, this unsupervised method also has the potential to improve the analysis of other similar types of spectroscopy data.

physics.data-an↗

arXiv2022

Design of a new SPS injection system via numerical optimisation

The Super Proton Synchrotron (SPS) injection system plays a fundamental role to preserve the quality of injected high-brightness beams for the Large Hadron Collider (LHC) physics program and to maintain the maximum storable intensity. The present system is the result of years of upgrades and patches of a system not conceived for such intensities and beam qualities. In this study, we propose the design of a completely new injection system for the SPS using multi-level numerical optimisation, including realistic hardware assumptions. We also present how this hierarchical optimisation framework can be adapted to other situations for optimal accelerator system design.

physics.acc-ph↗

arXiv2022

Spatiotemporal attosecond control of electron pulses via subluminal terahertz waveforms

Shaping electron beams with the cycles of light provides femtosecond and attosecond time resolution in electron microscopy and enables fundamental quantum-coherent measurements. However, efficient light-electron control requires a prolonged interaction between the two beams for cascaded transfer of photon energy and momentum to the freely propagating electrons. Here we report the use of traveling evanescent terahertz waves to achieve velocity matching and thereby high acceleration gradients both in space and in time. With experiment and simulations, we demonstrate attosecond streaking, temporal pulse compression, acceleration and spatial focusing of sub-relativistic electron pulses with a single evanescent-wave element under the control of selected terahertz delays and phases. Based on these results, we propose to use a symmetric arrangement with two evanescent terahertz waves to generate isolated attosecond electron pulses in a beam with realistic parameters. These results establish subluminal terahertz waves as a promising tool for ultrafast electron pulse control.

physics.optics↗

arXiv2022

Mapping charge capture and acceleration in a plasma wakefield of a proton bunch using variable emittance electron beam injection

In the Phase 2 of the AWAKE first experimental run (from May to November 2018), an electron beam was used to probe and test proton-driven wakefield acceleration in a rubidium plasma column. In this work, we analyze the overall charge capture and shot-to-shot reproducibility of the proton-driven plasma wakefield accelerator with various electron bunch injection parameters. The witness electron bunches were produced using an RF-gun equipped with a Cs2Te photocathode illuminated by a tailorable ultrafast deep ultraviolet (UV) laser pulse. The construction of the UV beam optical system enabled appropriate transverse beam shaping and control of its pulse duration, size, and position on the photocathode, as well as time delay with respect to the ionizing laser pulse that seeds the plasma wakefields in the proton bunches. Variable photocathode illumination provided the required flexibility to produce electron bunches with variable charge, emittance, and injection trajectory into the plasma column. We demonstrate charge capture rates exceeding 15% (40 pC of GeV accelerated charge for a 385 pC injected electron bunch) under optimized electron injection conditions.

physics.acc-ph↗

arXiv2022

Spin polarized electron beams production beyond III-V semiconductors

This paper summarizes the state of the art of photocathode based on III-V semiconductors for spin polarized electron beam production. The limitations preventing this class of material to provide the long term reliability at the highest average beam currents necessary for some of the new accelerator facilities or proposed upgrades of existing ones are illustrated. Promising alternative classes of materials are identified showing properties that can be leveraged to synthesize photocathode structures that can outperform III-V semiconductors in the production of spin polarized electron beams and support the operating conditions of advanced electron sources for new facilities.

physics.acc-ph↗

arXiv2022

SHERPAD: test of Slow high-efficiency extraction of Positrons from a Ring At DAFNE

The idea of using fixed-target annihilations of a high-energy positron beam on a target for producing a new, very feebly interacting particle has been exploited by the PADME experiment at LNF using the extracted beam from the LINAC in the BTF facility. Extracting the beam from a synchrotron would improve by several orders of magnitude the duty-cycle of the LINAC, thus greatly extending the physics reach of such experiments. The option of substituting or complementing the standard, slow 1/3 of integer resonant extraction technique by using coherent phenomena in a bent crystal, like the channeling has been studied by the SHERPA experiment. Both using the DAFNE main positron ring or the smaller damping ring (accumulator) as pulse extender of the LINAC have been considered. We here propose to demonstrate the feasibility of this technique performing an experiment on the DAFNE positron main ring, installing in a suitable vacuum goniometer a thin Silicon crystal, bent in the (110) direction in order to provide a ~1 mrad kick, and then simulating the extraction process with a virtual septum: instead of performing a real extraction, the crossing of the gap of a septum magnet is simulated by detecting positrons at its position (at phase advance close to 1/4) by means of a Silicon pixel detector inserted in the ring, in a secondary vacuum of a Roman pot.

physics.acc-ph↗

arXiv2022

The Development of Energy-Recovery Linacs

Energy-recovery linacs (ERLs) have been emphasised by the recent (2020) update of the European Strategy for Particle Physics as one of the most promising technologies for the accelerator base of future high-energy physics. The current paper has been written as a base document to support and specify details of the recently published European roadmap for the development of energy-recovery linacs. The paper summarises the previous achievements on ERLs and the status of the field and its basic technology items. The main possible future contributions and applications of ERLs to particle and nuclear physics as well as industrial developments are presented. The paper includes a vision for the further future, beyond 2030, as well as a comparative data base for the main existing and forthcoming ERL facilities. A series of continuous innovations, such as on intense electron sources or high-quality superconducting cavity technology, will massively contribute to the development of accelerator physics at large. Industrial applications are potentially revolutionary and may carry the development of ERLs much further, establishing another shining example of the impact of particle physics on society and its technical foundation with a special view on sustaining nature.

physics.acc-ph↗

arXiv2022

Phase diffusion in high-power microwave sources

Autocorrelation of electromagnetic fields emitted by high-power microwave sources makes it possible to determine the phase diffusion coefficient $D$. The value of $D$ imposes significant constraints on synchronization of several HPM sources. It is clearly demonstrated by the example of a relativistic reflex triode operating at $f\approx3.3$ GHz and having the phase diffusion coefficient equal to $D\approx0.06$ rad$^{2}\cdot$ns$^{-1}$.

physics.acc-ph↗

arXiv2022

A 300 kA Pulsed Power Supply for LBNF

The Long Baseline Neutrino Facility (LBNF) will produce the worlds most intense neutrino beam. Three series connected magnetic horns will require 5kV, 300kA, 800$μ$s pulses at a rate of 0.7Hz to focus the beam. Fermilab has designed and built pulsed high current supplies for horns in the past. Pulsed currents of 205 kA for Neutrinos at Main Injector (NuMI - NOvA), focusing a 120 GeV beam, and 170 kA for Booster Neutrino Beam (BNB - MiniBooNE) for focusing an 8 GeV beam have been operational for about 18 years. While the magnetic horns are expected to be replaced, the LBNF horn power supply is expected to last the lifetime of the project, 30 years. A resonant, half sine wave pulser was used for NuMI and BNB and has many practical advantages. The system has impedance limited fault currents by design, albeit large ones. That along with the resonant behavior means that thyristor switches are well suited. Many fault modes of the system have also been calculated. Several circuit changes were incorporated so that a single fault can be tolerated. The supply must be reversable to enable both neutrinos and anti-neutrinos to be produced. These reversal requirements required a significant amount of mechanical design and consideration to allow for quick reversal of all the semiconductors.

physics.acc-ph↗

arXiv2022

Design Challenges in High-Current Pulsed Striplines

The Long Baseline Neutrino Facility (LBNF) will produce the worlds most intense neutrino beam. Three series connected magnetic horns will require 5 kV, 300 kA, 800 $μ$s pulses at a rate of 1.4 Hz to focus the beam. Connecting a single power supply to these focusing horns will require a low impedance connection measuring over 60 m in length. To meet the challenging requirements of connecting the horns to the power supply, this connection is engineered as a nine-conductor, high-current pulsed stripline. It must pass through a harsh radiation environment, be passively cooled, and have an operational lifetime of at least 30 years. This paper discusses mechanical and electrical considerations such as high-voltage holdoff, clamped joint performance, and Lorentz force mitigations in order to meet the specified requirements. The results of tests and experiments on several prototypes of key design features will be presented and discussed.

physics.ins-det↗

arXiv2022

Investigations on the multi-sector hard X-Band Structures

The development of high gradient accelerating structures is one of the leading activities of the accelerator community. In the technological research of new construction methods for these devices, high-power testing is a critical step for the verification of their viability. Recent experiments showed that accelerating cavities made from hard copper alloys, can achieve better performance as compared with soft copper ones. The results of experiments showed that welded, hard copper cavities have shown breakdown rate of $10^{-3}$/pulse/meter at a gradient of about 150 MV/m, in the X-band, a using a shaped pulse with a 150 ns flat part. We continue the design, construction, and higher power experimental tests of three cells standing wave (SW) 11.424 GHz accelerating cavities fabricated with hard CuAg alloy to study the RF breakdown physics. Our aim is to fabricate the accelerating structures with innovative technologies easier to handle and cheaper; easier for surfaces inspection; easier for data elaboration and validation of joining techniques. The choice of these new technological approaches and design methods provides also the possibility of allocating the parasitic Higher Order Mode dampers. This paper describes the design of an optimized cavity made with sectors which provides a high longitudinal shunt impedance $R_{sh}$ of the operating mode. The cavity will be fabricated by using the Tungsten Inert Gas process to realize a hard CuAg structure. Two three-cells SW X-band accelerating cavities, to be operated in the $π$-mode and made out of hard CuAg alloy, were already fabricated at INFN-LNF by means of clamping and welding by using the TIG approach. Finally, we also report the RF characterization and low-power RF tests of a two-halves split hard CuAg structure that will be consequently TIG welded and employed for high-gradient tests and for the study of the RF breakdown physics.

physics.acc-ph↗

arXiv2022

Longitudinally strong focusing lattice for Compton--ring gamma sources

Electron storage rings of GeV energy with laser pulse stacking cavities are promising intense sources of polarised hard photons which, via pair production, can be used to generate polarised positron beams. Dynamics of electron bunches circulating in a storage ring and interacting with high-power laser pulses is studied both analytically and by simulation. Common features and differences in the behaviour of bunches interacting with an extremely high power laser pulse and with a moderate pulse are discussed. Also considerations on particular lattice designs for Compton gamma rings are presented.

physics.acc-ph↗

arXiv2022

FCC-ee, an Accelerator for New Physics Searches in the Heavy Quark Sector

This manuscript is devoted to the description of the proposed Future Circular Collider (FCC) project and its physics program focused on measurements involving heavy quarks. It summarizes the report submitted to the US 2021 Snowmass Process and European Strategy on Particle Physics. The proposed electron-positron collider based on established technologies will provide high instantaneous luminosities at center-of-mass energies from the Z resonance through the ZH and WW and up to the $t\bar{t}$ threshold. This will allow a very rich set of fundamental measurements as well as the study of heavy-flavor and tau physics in ultra-rare decays beyond the LHC reach.

hep-ex↗

arXiv2022

Development of LPA based hard X-ray sources at ELI Beamlines

We report the laser-plasma accelerator-based X-ray sources development at ELI beamlines. One of the main objectives of ELI Beamlines is to provide beams of ultrashort particle and complex X-ray sources to users from various research fields. Two hard X-ray betatron sources with high photon flux based on laser-plasma acceleration (LPA) are being commissioned. The first source is the Gammatron beamline located in Experimental Hall E2. It provides X-ray pulses of energies from 1-100 keV in betatron and up to a MeV in Compton scheme. A novel X-ray optics has been designed as a focusing optics of these hard X-ray sources for the user application. The second hard X-ray source based on LPA is being developed in the ELI plasma physics platform (P3) that will serve as an active diagnostics HED and Laboratory astrophysics, multi-beam experiments, and fundamental research. This source is now being commissioned, we will present the first experimental results. Besides, we have proposed a novel scheme for enhancing the X-ray flux based on betatron oscillations enhanced from nonlinear resonances due to interaction with a two-color laser field. In addition, we will introduce a novel optical probing technique with high sensitivity to characterize a low-density gas target for a laser-plasma accelerator. It has been achieved by employing multiple passes of the probe beam through the object and relay-imaging of the object between the individual passes.

physics.acc-ph↗

arXiv2022

Theoretical investigations on the Adiabatic Matching Device-based positron capture system

The positrons produced with the electron beam impinging on a conversion target, possess wide energy spectrum and large sweep of the angle of trajectories to the system axis. Accommodation of the positron bunch to the acceptance of an ajacent accelerator, mandates the reduction of angular spread. One of the most appropriate devices for transforming the phase portrait of a positron bunch is Adiabatic Matching Device (AMD). The paper presents an abridge theory of AMD. It is shown that the transformation of the transverse phase phase volume aimed at decrease the angular spread causes prolonging the bunch. Both the longitudinal and the transversal probability density functions are derived. The analytical results are validated with numerical simulations.

physics.acc-ph↗

arXiv2022

U.S. National Accelerator R\&D Program on Future Colliders

Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R\&D program is required. The U.S. HEP accelerator R\&D program currently has no direct effort in collider-specific R\&D area. This shortcoming greatly compromises the U.S. leadership role in accelerator and particle physics. In this white paper, we propose a new national accelerator R\&D program on future colliders and outline the important characteristics of such a program.

physics.acc-ph↗

arXiv2022

Synthetic dimensions using ultrafast free electrons

We propose a synthetic dimension for ultrafast free electrons based on the discrete energy sidebands in photon-induced near-field electron microscopy (PINEM). The PINEM synthetic dimension can offer a powerful way to coherently shape or modulate free-electron wavefunctions in systems such as ultrafast transmission electron microscopes, dielectric laser accelerators, and quantum free-electron lasers. As examples of this paradigm, we demonstrate Bloch oscillations, diffraction management, and linear optics effects such as Talbot self-imaging in the PINEM lattice. These effects show the potential of PINEM synthetic dimensions as a novel quantum simulation platform.

quant-ph↗

arXiv2022

Acceleration of 60 MeV proton beams in the commissioning experiment of SULF-10 PW laser

We report the experimental results of the commissioning phase in the 10 PW laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72\pm 9 J is directed to a focal spot of ~6 μm diameter (FWHM) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 \times 10^{21} W/cm^2. First laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration (TNSA). For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, e.g., both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 10^{22}-10^{23} W/cm^2 are anticipated to support various experiments on extreme field physics.

physics.plasm-ph↗