SEARCH · arXiv Science

Results for “physics.chem-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58Linked to original sources

arXiv2017

Theoretical Investigation of Li and Na Oxides Adsorption on TiC(111) Surface for Metal-Air Rechargeable Batteries

We analyze, with Density Functional Theory (DFT) calculations, the adsorption energies of Li$_2$O$_2$, Na$_2$O$_2$ and NaO$_2$ on clean and oxygen passivated TiC (111) surfaces. We show, that after deposition of two molecular layers of alkali metal oxides, the initial state of the TiC surface becomes unimportant for the adsorption energy and that all adsorption energies approach their native crystal values. The structure of the adsorbed molecular layers is analyzed and compared to their native oxide crystal structure. Finally, we discuss the possible implications for electrode optimization for Li-air and Na-air batteries.

physics.chem-ph↗

arXiv2018

Isotope Effect on the Magnetic Properties of Hexamethylbenzene: Evidence of Magnetism Based on Correlated Motion of Deuterons

The associated magnetic moments of the periodic rotational motion of methyl groups in hexamethylbenzene C$_6$(CH$_3$)$_6$ were recently identified to contribute to its overall magnetic susceptibility. Those measurements however, were only performed on hydrogenous polycrystalline samples. We report magnetic susceptibility measurements on single crystalline C$_6$(CH$_3$)$_6$ in the cases where the applied magnetic field is parallel and perpendicular to the molecular basal planes. In the former case, metastable behavior near the onset temperature T$_{C-H}$=118 K is identified while in the latter, no anomalous behavior is observed. Similar anomalies are observed in deuterated hexamethylbenzene C$_6$(CD$_3$)$_6$ (where D is deuterium), however, T$_{C-D}$ occurs 14 K higher at 132 K. In addition, a peak anomaly identified near 42 K is suggested to be due to the onset of coherent quantum tunneling of deuterons. The near cubic ground state is proposed to be the result of a more radical form of the Jahn-Teller effect occurring in a molecular solid where the lattice distorts to remove the orbital degeneracies of the protons to lower its energy. The apparent magnetic anisotropy and isotope effect provide evidence that apart from electrons, not only protons, but also deuterons establish strongly correlated behavior.

cond-mat.str-el↗

arXiv2018

Free energy landscape of sodium solvation into graphite

Na is known to deliver very low energy capacity for sodium intercalation compared to Lithium. In this study, we use quantum mechanics based metadynamics simulations to obtain the free energy landscape for sodium ion intercalation from Dimethyl sulfoxide (DMSO) solvent into graphite. We find that the lowest free energy minima from the metadynamics are associated with sodium solvated by 3 or 4 DMSO. The free energy minima of these states are activated by a free energy of solvation computed to be 0.17 eV, which in turn are the most thermodynamically stable. We observe weak interactions of sodium with graphite sheets during the unbiased and biased molecular dynamics simulations. Our simulations results indicate that solvent plays an important role in stabilizing the sodium intercalation into graphite through shielding of the sodium while modulating the interaction of the solvent with the graphite sheets. In order to facilitate this intercalation, we propose solvents with negatively charged groups and aromatic cores (e.g., cyclic ethers) that could allow a greater rate of anion exchange to increase Na+ mobility.

physics.chem-ph↗

arXiv2021

Surprisingly Good Performance of XYG3 Family Functionals Using Scaled KS-MP3 Correlation

By adding a GLPT3 (third-order Görling-Levy perturbation theory, or KS-MP3) term E3 to the XYG7 form for a double hybrid, we are able to bring down WTMAD2 (weighted total mean absolute deviation) for the very large and chemically diverse GMTKN55 benchmark to an unprecedented 1.17 kcal/mol, competitive with much costlier composite wavefunction ab initio approaches. Intriguingly: (a) the introduction of E3 makes an empirical dispersion correction redundant; (b) GGA or mGGA semilocal correlation functionals offer no advantage over LDA in this framework; (c) if a dispersion correction is retained, then simple Slater exchange leads to no significant loss in accuracy. It is possible to create a 6-parameter functional with WTMAD2=1.42 that has no post-LDA DFT components and no dispersion correction in the final energy.

physics.chem-ph↗

arXiv2024

Ground-States for Metals from Converged Coupled Cluster Calculations

Many-electron correlation methods offer a systematic approach to predicting material properties with high precision. However, practically attaining accurate ground-state properties for bulk metals presents significant challenges. In this work, we propose a novel scheme to reach the thermodynamic limit of the total ground-state energy of metals using coupled cluster theory. We demonstrate that the coupling between long-range and short-range contributions to the correlation energy is sufficiently weak, enabling us to restrict long-range contributions to low-energy excitations in a controllable way. Leveraging this insight, we calculate the surface energy of aluminum and platinum (111), providing numerical evidence that coupled cluster theory is well-suited for modeling metallic materials, particularly in surface science. Notably, our results exhibit convergence with respect to finite-size effects, basis-set size, and coupled cluster expansion, yielding excellent agreement with experimental data. This paves the way for more efficient coupled cluster calculations for large systems and a broader utilization of the theory in realistic metallic models of materials.

cond-mat.mtrl-sci↗

arXiv2026

Surface Plasmons in the Continuum

The interest to foster plasmonic applications at energies in the ultra-violet, has escalated research initiatives in clusters of unconventional plasmonic materials like aluminum and indium,for which the surface-plasmon resonance appears above the ionization potential. Naturally, the quantum mechanical description calls for the incorporation of the ionization process, thereby making the ab initio calculations challenging. We present a robust approach within the time-evolution formalism of the time-dependent density-functional theory to calculate surface plasmon resonance in the continuum of metal clusters. Using the much studied Al$_{13}^-$ as a system of reference, we show that accurate description of the continuum and of the ionization of the cluster allow to capture a broad surface-plasmon in the UV. Application of this approach in aluminum clusters has given the size-dependent evolution from discrete spectral features in Al$_{6}$ to the surface-plasmon in larger clusters in the deep ultra-violet.

physics.chem-ph↗

arXiv2018

Efficient and Deterministic Propagation of Mixed Quantum-Classical Liouville Dynamics

We propose a highly efficient mixed quantum-classical molecular dynamics scheme based on a solution of the quantum-classical Liouville equation (QCLE). By casting the equations of motion for the quantum subsystem and classical bath degrees of freedom onto an approximate set of coupled first-order differential equations for c-numbers, this scheme propagates the composite system in time deterministically in terms of independent classical-like trajectories. To demonstrate its performance, we apply the method to the spin-boson model, a photo-induced electron transfer model, and a Fenna-Matthews-Olsen complex model, and find excellent agreement out to long times with the numerically exact results, using several orders of magnitude fewer trajectories than surface-hopping solutions of the QCLE. Owing to its accuracy and efficiency, this method promises to be very useful for studying the dynamics of mixed quantum-classical systems.

physics.chem-ph↗

arXiv2018

Oxygen Reduction Reaction: Rapid Prediction of Mass Activity of Unstrained Nanostructured Platinum Electrocatalysts

Tailored Pt nanoparticle catalysts are promising candidates to accelerate the oxygen reduction reaction (ORR) in fuel cells. However, the search for active nanoparticle catalysts is hindered by laborious effort of experimental synthesis and measurements. On the other hand, DFT-based approaches are still time consuming and often not efficient. In this study, we introduce a computational model which enables rapid catalytic activity calculation of unstrained pure Pt nanoparticle electrocatalysts. The generic setup of the computational model is based on DFT results and experimental data obtained worldwide over the past ca 20 years; whereas, importantly, the computational model dispenses with DFT calculations during runtime. This realizes feasible and sharply reduced computation effort in comparison to theoretical approaches where DFT calculations must be performed for each nanoparticle individually. Regarding particle size effects on Pt nanoparticles, experimental catalytic mass activities from previous studies are accurately reproduced by our computational model. Shedding light on the parameter space of particle size effects, this study enables predictions beyond available experiments: Our computational model identifies potential enhancement in mass activity up to 190% over the experimentally detected maximum. Importantly, the rapid activity calculation enabled by our computational model may pave the way for extensive nanoparticle screening to expedite the search for improved electrocatalysts.

physics.chem-ph↗

arXiv2018

Intramolecular Vibrations Complement the Robustness of Primary Charge Separation in a Dimer Model of the Photosystem II Reaction Center

The energy conversion of oxygenic photosynthesis is triggered by primary charge separation in proteins at the photosystem II reaction center. Here, we investigate the impacts of the protein environment and intramolecular vibrations on primary charge separation at the photosystem II reaction center. This is accomplished by combining the quantum dynamic theories of condensed phase electron transfer with quantum chemical calculations to evaluate the vibrational Huang-Rhys factors of chlorophyll and pheophytin molecules. We report that individual vibrational modes play a minor role in promoting the charge separation, contrary to the discussion in recent publications. Nevertheless, these small contributions accumulate to considerably influence the charge separation rate, resulting in sub-picosecond charge separation almost independent of the driving force and temperature. We suggest that the intramolecular vibrations complement the robustness of the charge separation in the photosystem II reaction center against the inherently large static disorder of the involved electronic energies.

physics.chem-ph↗

arXiv2018

Concerted Metal Cation Desorption and Proton Transfer on Deprotonated Silica Surfaces

The adsorption equilibrium constants of monovalent and divalent cations to material surfaces in aqueous media are central to many technological, natural, and geochemical processes. Cation adsorption/desorption is often proposed to occur in concert with proton-transfer on hydroxyl-covered mineral surfaces, but so far this cooperative effect has been inferred indirectly. This work applies Density Functional Theory (DFT)-based molecular dynamics simulations of explicit liquid water/mineral interfaces to calculate metal ion desorption free energies. Monodentate adsorption of Na(+), Mg(2+), and Cu(2+) on partially deprotonated silica surfaces are considered. Na(+) is predicted to be unbound, while Cu(2+) exhibits larger binding free energies to surface SiO(-) groups than Mg(2+). The predicted trends agree with competitive adsorption measurements on fumed silica surfaces. As desorption proceeds, Cu(2+) dissociates one of the H2O molecules in its first solvation shell, turning into Cu(2+)O(-)(H2O)(3), while Mg remains Mg(2+)(H2O)(6). The protonation state of the SiO(-) group at the initial binding site does not vary monotonically with cation desorption.

physics.chem-ph↗

arXiv2018

Accurate Predictions of Electron Binding Energies of Dipole-Bound Anions via Quantum Monte Carlo Methods

Neutral molecules with sufficiently large dipole moments can bind electrons in diffuse nonvalence orbitals with most of their charge density far from the nuclei, forming so-called dipole-bound anions. Because long-range correlation effects play an important role in the binding of an excess electron and overall binding energies are often only of the order of 10-100s of wave numbers, predictively modeling dipole-bound anions remains a challenge. Here, we demonstrate that quantum Monte Carlo methods can accurately characterize molecular dipole-bound anions with near threshold dipole moments. We also show that correlated sampling Auxiliary Field Quantum Monte Carlo is particularly well-suited for resolving the fine energy differences between the neutral and anionic species. These results shed light on the fundamental limitations of quantum Monte Carlo methods and pave the way toward using them for the study of weakly-bound species that are too large to model using traditional electron structure methods.

physics.chem-ph↗

arXiv2018

Quantifying Density Errors in DFT

We argue that any general mathematical measure of density error, no matter how reasonable, is too arbitrary to be of universal use. However the energy functional itself provides a universal relevant measure of density errors. For the self-consistent density of any Kohn-Sham calculation with an approximate functional, the theory of density-corrected density functional theory (DC-DFT) provides an accurate, practical estimate of this ideal measure. We show how to estimate the significance of the density-driven error even when exact densities are unavailable. In cases with large density errors, the amount of exchange-mixing is often adjusted, but we show this is unnecessary. Many chemically relevant examples are given.

physics.comp-ph↗

arXiv2018

Combining Metadynamics and Integrated Tempering Sampling

The simulation of rare events is one of the key problems in atomistic simulations. Towards its solution a plethora of methods have been proposed. Here we combine two such methods metadynamics and inte-grated tempering sampling. In metadynamics the fluctuations of a carefully chosen collective variable are amplified, while in integrated tempering sampling the system is pushed to visit an approximately uniform interval of energies and allows exploring a range of temperatures in a single run. We describe our ap-proach and apply it to the two prototypical systems a SN2 chemical reaction and to the freezing of silica. The combination of metadynamics and integrated tempering sampling leads to a powerful method. In par-ticular in the case of silica we have measured more than one order of magnitude acceleration.

physics.chem-ph↗

arXiv2018

On the physisorption of water on graphene: Sub-chemical accuracy from many-body electronic structure methods

Molecular adsorption on surfaces plays a central role in catalysis, corrosion, desalination, and many other processes of relevance to industry and the natural world. Few adsorption systems are more ubiquitous or of more widespread importance than those involving water and carbon, and for a molecular level understanding of such interfaces water monomer adsorption on graphene is a fundamental and representative system. This system is particularly interesting as it calls for an accurate treatment of electron correlation effects, as well as posing a practical challenge to experiments. Here, we employ many-body electronic structure methodologies that can be rigorously converged and thus provide faithful references for the molecule-surface interaction. In particular, we use diffusion Monte-Carlo (DMC), coupled cluster (CCSD(T)), as well as the random phase approximation (RPA) to calculate the strength of the interaction between water and an extended graphene surface. We establish excellent, sub-chemical, agreement between the complementary high-level methodologies, and an adsorption energy estimate in the most stable configuration of approximately -100\,meV is obtained. We also find that the adsorption energy is rather insensitive to the orientation of the water molecule on the surface, despite different binding motifs involving qualitatively different interfacial charge reorganisation. In producing the first demonstrably accurate adsorption energies for water on graphene this work also resolves discrepancies amongst previously reported values for this widely studied system. It also paves the way for more accurate and reliable studies of liquid water at carbon interfaces with cheaper computational methods, such as density functional theory and classical potentials.

cond-mat.mtrl-sci↗

arXiv2018

Tailoring ink-substrate interactions via thin polymeric layers for high-resolution printing

The surface properties of a substrate are among the most important parameters in the printing technology of functional materials, determining not only the printing resolution but also the stability of the printed features. This paper addresses the wetting difficulties encountered during inkjet printing on homogeneous substrates as a result of improper surface properties. We show that the wetting of a substrate and, consequently, the quality of the printed pattern, can be mediated through the deposition of polymeric layers that are a few nanometers thick. The chemical nature of the polymers determines the surface energy and polarity of the thin layer. Some applications, however, require a rigorous adjustment of the surface properties. We propose a simple and precise method of surface-energy tailoring based on the thermal decomposition of poly(methyl methacrylate) (PMMA) layers. A smooth transition in the wetting occurs when the thickness of the PMMA layer approaches zero, probably due to percolating the underlying surface of the substrate, which enables the inkjet printing of complex structures with a high resolution. In particular, the wetting of three substrate-ink systems was successfully adjusted using the thin polymeric layer: (i) a tantalum-oxide-based ink on indium-tin-oxide-coated glass, (ii) a ferroelectric lead zirconate titanate ink on a platinized silicon substrate, and (iii) a silver nanoparticle ink on an alumina substrate.

physics.app-ph↗

arXiv2019

Strong deformation of ferrofluid-filled elastic alginate capsules in inhomogenous magnetic fields

We present a new system based on alginate gels for the encapsulation of a ferrofluid drop, which allows us to create millimeter-sized elastic capsules that are highly deformable by inhomogeneous magnetic fields. We use a combination of experimental and theoretical work in order to characterize and quantify the deformation behavior of these ferrofluid-filled capsules. We introduce a novel method for the direct encapsulation of unpolar liquids by sodium alginate. The addition of polar alcohol molecules allows us to encapsulate a ferrofluid as a single phase. This encapsulation method increases the amount of encapsulated magnetic nanoparticles resulting in high deformations and offers possible applications of capsules as actuators, switches, or valves in confined spaces like microfluidic devices. We determine both elastic moduli of the capsule shell, Young's modulus and Poisson's ratio, by employing two independent mechanical methods, spinning capsule measurements and capsule compression between parallel plates. We then show that the observed magnetic deformation can be fully understood from magnetic forces exerted by the ferrofluid on the capsule shell if the magnetic field distribution and magnetization properties of the ferrofluid are known. Using an iterative solution scheme that couples a finite element / boundary element method for the magnetic field calculation to the solution of the elastic shape equations, we achieve quantitative agreement between theory and experiment for deformed capsule shapes using the Young modulus from mechanical characterization and the surface Poisson ratio as a fit parameter. This detailed analysis confirms the results from mechanical characterization that the surface Poisson ratio of the alginate shell is close to unity, that is, deformations of the alginate shell are almost area conserving.

cond-mat.soft↗

arXiv2018

Atomic Scale Interfacial Transport at an Extended Evaporating Meniscus

Recent developments in fabrication techniques enabled the production of nano- and angstrom-scale conduits. While scientists are able to conduct experimental studies to demonstrate extreme evaporation rates from these capillaries, theoretical modeling of evaporation from a few nanometers or sub-nanometer meniscus interfaces, where adsorbed film, transition film and intrinsic region are intertwined, is absent in the literature. Using the computational setup constructed to identify the detailed profile of a nano-scale evaporating interface, we discovered the existence of lateral momentum transport within and associated net evaporation from adsorbed liquid layers, which are long believed to be at the equilibrium established between equal rates of evaporation and condensation. Contribution of evaporation from the adsorbed layer increases the effective evaporation area, reducing the excessively estimated evaporation flux values. This work takes the first step towards a comprehensive understanding of atomic/molecular scale interfacial transport at extended evaporating menisci. The modeling strategy used in this study opens an opportunity for computational experimentation of steady-state evaporation and condensation at liquid/vapor interfaces located in capillary nano-conduits.

cond-mat.soft↗

arXiv2018

Entanglement reduction induced by geometrical confinement in polymer thin films

We report simulation results on melts of entangled linear polymers confined in a free-standing thin film. We study how the geometric constraints imposed by the confinement alter the entanglement state of the system compared to the equivalent bulk system using various observables. We find that the confinement compresses the chain conformation uniaxially, decreasing the volume pervaded by the chain, which in turn reduces the number of the accessible inter-chain contact that could lead to entanglements. This local and non-uniform effect depends on the position of the chain within the film. We also test a recently presented theory that predicts how the number of entanglements decreases with geometrical confinement.

cond-mat.soft↗