arXiv Science⌕ Search

SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources
arXiv2023

First Experimental Evidence of a Beam-Beam Long-Range Compensation Using Wires in the Large Hadron Collider

In high intensity and high energy colliders such as the CERN Large Hadron Collider and its future High Luminosity upgrade, interactions between the two beams around the different Interaction Points impose machine performance limitations. In fact, their effect reduces the beam lifetime and therefore the collider's luminosity reach. Those interactions are called Beam-Beam Long-Range interactions and a possible mitigation of their effect using DC wires was proposed for the first time in the early 2000's. This solution is currently being studied as an option for enhancing the HL-LHC performance. In 2017 and 2018, four demonstrators of wire compensators have been installed in the LHC. A two-year long experimental campaign followed in order to validate the possibility to mitigate the BBLR interactions in the LHC. During this campaign, a proof-of-concept was completed and motivated an additional set of experiments, successfully demonstrating the mitigation of BBLR interactions effects in beam conditions compatible with the operational configuration. This paper reports in detail the preparation of the experimental campaign, the obtained results and draws some perspectives for the future.

physics.acc-ph↗
arXiv2022

Hybrid conformal REBCO dipole for a next hadron collider

A strategy is presented by which a tape-stack REBCO cable may be configured in a conformal winding in such a way that all tape faces are ~parallel to B thorughout the winding, yielding ~3x more current performance than is possible in conventional REBCO cables. A method for dynamic current sharing is discussed, in which current would naturally re-distribute among the tapes of each cable as the winding current is increased without inducing premature quench. A dipole geometry is presented in which a conformal REBCO insert winding is configured within a cable-in-conduit Nb3Sn outsert winding so that the sub-windings can be separately fabricated, and then assembled in a common structure and preloaded for effective stress management. The total cost of superconductor in this dipole is likely a minimum among the design options for 18 T. Plans for development of the coil technologies and a model dipole are presented.

physics.acc-ph↗
arXiv2022

Irradiation Facilities and Irradiation Methods for High Power Target

High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified as the leading cross-cutting challenges of high-power target facilities. Target material R&D to address these challenges are essential to enable and ensure reliable operation of future-generation accelerators. Irradiation facilities and alternative methods are critical to provide a full support of material R&D and better address these critical challenges.

physics.acc-ph↗
arXiv2022

Snowmass21 Accelerator Modeling Community White Paper

After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-edge and emerging computing opportunities, such as advanced algorithms, AI/ML and quantum computing, computational needs in hardware, software performance, portability and scalability, and needs for scalable I/O and in-situ analysis. Considerations of reliability, long-term sustainability, user support and training are considered next, before discussing the benefits of ecosystems with integrated workflows based on standardized input and output, and with integrated frameworks and data repositories developed as a community. Last, we highlight how the community can work more collaboratively and efficiently through the development of consortia and centers, and via collaboration with industry.

physics.acc-ph↗
arXiv2022

High Energy & High Luminosity $γγ$ Colliders

With the best of modern standard lasers, high-energy $γγ$ colliders from electron beams of E larger than 250 GeV are only possible at the expense of photon luminosity, i.e. 10 times lower than for photon colliders at c.m. energies below 0.5 TeV. For existing state-of-the art lasers, an optimistic upper energy limit for x=4.8 is an electron beam of less than 250 GeV. This Snowmass21 Contributed Paper shows how Free Electron Lasers (FEL) pave the way for High Energy & High Luminosity $γγ$ colliders. We present and assess a conceptual design study of a FEL with wavelength of 2.4 $μ$m and an x-factor in the range of 2 to 40, to maximize the luminosity of a $γγ$ collider as second interaction region of 0.5 TeV to 10 TeV c.m. $e^+e^-$ colliders.

physics.acc-ph↗
arXiv2022

XCC: An X-ray FEL-based $γγ$ Collider Higgs Factory

This report describes the design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 34,000 Higgs bosons per $10^7$ second year, roughly the same as the ILC Higgs rate. The electron accelerator is based on cold copper distributed coupling (C$^3$) accelerator technology. The 0.7 J pulse energy of the XFEL represents a 300-fold increase over the pulse energy of current soft x-ray FEL's. Design challenges are discussed, along with the R\&D to address them, including demonstrators.

hep-ex↗
arXiv2022

REBCO -- a silver bullet for our next high-field magnet and collider budget?

High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future high-energy machines due to a prohibitively high price tag based on the current conductor and magnet fabrication cost. The high-temperature superconducting REBCO coated conductor can address both the technical and cost issues, a silver bullet to lay both monsters to rest. The challenges and unknowns, however, can be too arduous to make the silver bullet. We lay out a potential road forward and suggest key action items. As a contribution from the accelerator community, we attempt to clarify for our theorist and experimenter colleagues a few aspects about the future high-field superconducting magnets. We hope to stimulate an effective plan for the 2023 P5 process that can lead to a cost-effective high-field magnet technology for future colliders and the exciting physics they can steward.

physics.acc-ph↗
arXiv2022

Snowmass'21 Whitepaper -- IsoDAR Overview

IsoDAR@Yemilab is a unique facility for underground neutrino physics. The system comprises an accelerator-driven $\barν_e$ source located next to the Yemilab LSC 2.3 kt detector. Because this facility is first-of-its-kind, it opens new approaches to Beyond Standard Model (BSM) physics searches. The program is most well-known for its capability to perform searches for new oscillation signatures at high statistics in a model-agnostic manner. IsoDAR@Yemilab can definitively resolve the question of $\barν_e$ disappearance at short baselines. Beyond this, IsoDAR offers a broad range of searches for new neutrino properties and new particles. The facility uses a state-of-the art cyclotron, that is now fully designed and is undergoing protoyping. Preliminary approval to run at Yemilab in South Korea has led to the completed excavation of caverns. While the accelerator is designed to run underground, IsoDAR accelerators can also be constructed on the surface, allowing this project to contribute to the opportunity for production of life-saving medical isotopes. The capabilites, technical elements, and deployment studies are well-documented in articles on arXiv, and appear in multiple Snowmass'21 whitepapers. Rather than repeat this text, this whitepaper provides a "table of contents" to these documents.

hep-ex↗
arXiv2022

Laser-Driven Structure-Based Accelerators

Particle acceleration in microstructures driven by ultrafast solid state lasers is a rapidly evolving area of advanced accelerator research, leading to a variety of concepts based on planar-symmetric dielectric gratings, hollow core fibers, photonic crystals, and plasmonic meta-surfaces. This approach leverages well-established industrial fabrication capabilities and the commercial availability of tabletop lasers to reduce cost, with demonstrated axial accelerating fields in the GV/m range. Wide-ranging international efforts have significantly improved understanding of gradient limits, structure design, particle focusing and transport, staging, and development of compatible low-emittance electron sources. With a near-term focus on low-current MeV-scale applications for compact scientific and medical instruments, as well as novel diagnostics capabilities, structure-based laser-driven accelerators have several key benefits that warrant consideration for future high-energy physics machines, including low beamstrahlung energy loss, modest power requirements, stability, and readiness of supporting technologies.

physics.acc-ph↗
arXiv2022

Solving Critical Problems of the Muon Collider Higgs Factory: Optics, Magnets and their Protection, Detector Backgrounds

A low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). Magnet designs are proposed which provide high operating gradient and magnetic field in a large aperture to accommodate the large size of muon beams (due to low beta*), as well as a cooling system to intercept the large heat deposition from the showers induced by decay electrons. The distribution of heat deposition in the MC SR lattice elements requires large-aperture magnets in order to accommodate thick high-Z absorbers to protect the SC coils. Based on the developed MARS15 model and intensive simulations, a sophisticated radiation protection system was designed for the collider SR and IR to bring the peak power density in the superconducting coils below the quench limit and reduce the dynamic heat deposition in the cold mass by a factor of 100. The system consists of tight tungsten masks in the magnet interconnect regions and elliptical tungsten liners in the magnet aperture optimized individually for each magnet. These also reduce the background particle fluxes in the collider detector.

physics.acc-ph↗
arXiv2022

C$^3$ Demonstration Research and Development Plan

C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.

physics.acc-ph↗
arXiv2022

The CLIC project

The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e$^+$e$^-$-collider under development by the CLIC accelerator collaboration, hosted by CERN. The CLIC accelerator has been optimised for three energy stages at centre-of-mass energies 380 GeV, 1.5 TeV and 3 TeV. CLIC uses a novel two-beam acceleration technique, with normal-conducting accelerating structures operating in the range of 70-100 MV/m. The report describes recent achievements in accelerator design, technology development and prototyping, system tests and beam tests. Large-scale CLIC-specific beam tests have taken place, for example, at the CLIC Test Facility CTF3 at CERN, at the Accelerator Test Facility ATF2 at KEK, at the FACET facility at SLAC and at the FERMI facility in Trieste. Together, they demonstrate that all implications of the CLIC design parameters are well understood and reproducible in beam tests and prove that the CLIC performance goals are realistic. The implementation of CLIC near CERN has been investigated. Focusing on a staged approach starting at 380 GeV, this includes civil engineering aspects, electrical networks, cooling and ventilation and installation scheduling, transport. All CLIC studies have put emphasis on optimising cost and energy efficiency, and the resulting power and cost estimates are reported. The report follows very closely the accelerator project description in the CLIC Summary Report for the European Particle Physics Strategy update 2018-19. Detailed studies of the physics potential and detector for CLIC, and R&D on detector technologies, have been carried out by the CLIC detector and physics (CLICdp) collaboration. CLIC provides excellent sensitivity to Beyond Standard Model physics, through direct searches and via a broad set of precision measurements of Standard Model processes, particularly in the Higgs and top-quark sectors.

physics.acc-ph↗
arXiv2022

White Paper: AWAKE, Plasma Wakefield Acceleration of Electron Bunches for Near and Long Term Particle Physics Applications

Plasma-based accelerators have made remarkable progress over the last two decades. Their unique characteristics make them tools that can revolutionize fields of science and applications. AWAKE takes advantage of the availability of high-energy, relativistic proton bunches to drive large amplitude wakefields ($\sim$GV/m) in a single plasma over distances sufficient to produce hundreds of GeV to TeV electron bunches.

physics.acc-ph↗
arXiv2022

Performance of the LHC injector chain after the upgrade and potential development

The CERN accelerator complex prepares protons for the four big experiments at the Interaction Regions of the Large Hadron Collider (LHC) as well as for a number of fixed target experiments, which take beam directly from the LHC injectors. Between 2010 and 2021, a series of major changes were designed and implemented to the injector complex under the LHC Injectors Upgrade (LIU) project, with the main goal to enable the injector chain to produce LHC beams with doubled intensity and brightness. As a byproduct of these upgrades, the fixed target beams are also expected to benefit and possibly access parameter ranges previously unexplored. This letter summarises the main fixed target beams produced by the LHC injectors, their expected performance after the upgrade for the various beam types and shows first results from 2021 beam commissioning.

physics.acc-ph↗
arXiv2022

Nurturing the Industrial Accelerator Technology Base in the US

The purpose of this white paper is to discuss the importance of having a world class domestic industrial vendor base, capable of supporting the needs of the particle accelerator facilities, and the necessary steps to support and develop such a base in the United States. The paper focuses on economic, regulatory, and policy-driven barriers and hurdles, which presently limit the depth and scope of broader industrial participation in US accelerator facilities. It discusses the international competition landscape and proposes steps to improve the strength and vitality of US industry.

physics.acc-ph↗
arXiv2022

Critical problems of energy frontier Muon Colliders: optics, magnets and radiation

This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choice, hence the design of the collider optics, magnets and Machine Detector Interface (MDI) are closely intertwined. As a first approximation we use the Interaction Region (IR) design with beta-star=3 mm, whereas for the arcs we re-scale the arc cell design of the 3 TeV MC. Traditional cos-theta coil geometry and Nb3Sn superconductor were used to provide field maps for the analysis and optimization of the arc lattice and IR design, as well as for studies of beam dynamics and magnet protection against radiation. The stress management in the coil will be needed to avoid large degradation or even damage of the brittle SC coils. In the assumed IR designs, the dipoles close to the Interaction Point (IP) and tungsten masks in each IR (to protect magnets) help reducing background particle fluxes in the detector by a substantial factor. The tungsten nozzles in the 6 to 600 cm region from the IP, assisted by the detector solenoid field, trap most of the decay electrons created close to the IP as well as most of the incoherent electron-positron pairs generated in the IP. With sophisticated tungsten, iron, concrete and borated polyethylene shielding in the MDI region, the total reduction of background loads by more than three orders of magnitude can be achieved.

physics.acc-ph↗
arXiv2022

White Paper on High Temperature Superconducting Bi-2212 Magnets for Energy Frontier Circular Colliders

As the only high-temperature superconducting (HTS) material available as an isotropic, twisted, multifilamentary round wire, Bi-2212 is very promising for expanding the high-field superconducting accelerator magnet toolbox beyond the round-wire, isotropic Nb-Ti and Nb3Sn conductors used by HEP so far. In this paper, we describe the important roles that Bi-2212 might play for future high energy circular colliders including both high energy proton and muon colliders. We describe its present technology status (conductor development, magnet design concepts, prototype magnet status) and then provide a ten-year plan for >15 T accelerator magnets and >25 T solenoid magnets within an integrated strategy to engage industry and the entire US and international scientific enterprise interested in HTS magnet applications.

physics.acc-ph↗