arXiv Science⌕ Search

SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

Gravitational Synchrotron Radiation from Storage Rings

We reinvestigate the gravitational waves (GWs) induced by charged particles in storage rings. There are two major components in such GWs. One is the gravitational synchrotron radiation (GSR), i.e., the direct emission by the bending of the trajectory of a relativistic charged particle, much like the conventional electromagnetic synchrotron radiation (EMSR), albeit with characteristic difference in their radiation spectra. While the conventional EMSR spectrum peaks at the critical frequency, $ω_c=γ^3ω_0\ggω_0$, the spectrum of GSR peaks at the storage ring fundamental frequency $ω_0$, which is much lower. The other is the resonant conversion of EMSR to GWs at the same frequency through the storage ring bending magnets, i.e., the Gertsenshtein effect. Invoking LHC at CERN as a numerical example, we found that the spacetime perturbation associated with GSR, $h\sim 5\times 10^{-40}$, falls far below the sensitivity of GW detectors based on the LIGO-type Michelson interferometry approach. On the other hand, the GWs induced by the resonant conversion of EMSR have much higher frequencies and thus much localized, so it is conceivable to detect them through the reverse conversion, the so-called `light shining through a wall', process.

gr-qc↗

A Cost-Effective Upgrade Path for the Fermilab Accelerator Complex

The Fermilab Proton Improvement Plan II, or PIP-II, would enable the world's most intense high-energy neutrino beam and would help scientists search for rare particle physics processes. The PIP-II goal is to deliver 1.2 MW of proton beam power from the Fermilab Main Injector, over the energy range 60 - 120 GeV, at the start of operation of the LBNF/DUNE program. PIP-II provides a variety of upgrade paths to higher beam power from the Main Injector, as demanded by the neutrino science program and as recommended by the 2014 P5 report. Delivering more than 2 MW to the LBNF target in the future will require a replacement of the existing Booster. This report outlines a cost-effective Booster replacement option and an upgrade path for the Fermilab Accelerator Complex to attain 2.4-MW beam power on the LBNF target, as well as to retain the capability to provide 8-GeV proton beams to the existing Fermilab Muon Campus via the existing Recycler ring. Its cost-effectiveness is achieved by: (1) using a small-diameter metallic vacuum chamber in the Booster replacement and (2) reusing the existing Recycler ring. Reusing the Recycler ring may be of particular advantage since it is presently employed to deliver 8-GeV beams to the Muon Campus experiments. The present concept also retains such a capability.

physics.acc-ph↗

Multi-GeV electron bunches from an all-optical laser wakefield accelerator

We present the first demonstration of multi-GeV laser wakefield acceleration in a fully optically formed plasma waveguide, with an acceleration gradient as high as 25 GeV/m. The guide was formed via self-waveguiding of <15 J, 45 fs (<~300 TW) pulses over 20 cm in a low density hydrogen gas jet, with accelerated electron bunches simultaneously driven up to 5 GeV in a milliradian divergence quasi-monoenergetic peak of relative energy width ~15% and charge of at least ~10 picocoulombs. Energy gain is inversely correlated with on-axis waveguide density in the range N_e0=(1.3-3.2)x10^17 cm^(-3). We find that shot-to-shot stability of bunch spectra and charge are strongly dependent on the pointing of the injected laser pulse and gas jet uniformity. We also observe evidence of pump depletion-induced dephasing, a consequence of the long optical guiding distance.

physics.acc-ph↗

Motivation and Development of a Compact Superconducting Accelerator for X-ray Medical Device Sterilization

Fermilab is developing a compact superconducting CSRF accelerator as a source of a high-power, high-energy electron beam to produce an x-ray beam comparable to $\geq$ 2 MCi of cobalt-60. As part of this development, we are presently assembling a 20 kW, 1.6 MeV prototype that incorporates the four enabling technologies described below. These technologies support a heat budget that is within the capacity of commercially available cryocoolers and eliminate the need for liquid cryogens. The use of superconducting technologies promises efficiencies, wall-plug to beam, of 80% or greater. A summary of the design and progress to date will be given. In addition, we will present a review of developments within the medical device sterilization industry that are motivating the development of this technology.

physics.acc-ph↗

Different forms of first order spin-orbit motion and their utility in spin matching in electron storage rings

We derive the first order phase space dependence of spin-orbit motion of a particle in an accelerator by expanding the Thomas-BMT equation. Different forms can be found in the literature and we show how these are related, and care is taken to include fringe fields. The advantages of using certain forms is demonstrated by a detailed re-derivation of the spin matching conditions by V. Ptitsyn for the spin rotators in the Electron Storage Ring (ESR) of the Electron-Ion Collider (EIC) at Brookhaven National Laboratory.

physics.acc-ph↗

Design of a medium energy, high average power superconducting e-beam accelerator for environmental applications

We present the technical and engineering design of a medium energy (10 MeV) and high average power (1 MW) electron beam accelerator intended for irradiation treatment of high volume industrial and municipal wastewater. The accelerator uses superconducting radiofrequency (SRF) cavity technology for producing the high average beam power with $>$90% RF to beam efficiency. The design of the accelerator is simplified and tailored for industrial settings by adopting the cryocooler conduction-cooling technique for the SRF cavity instead of a conventional liquid helium bath cryo-system. The technical design is supplemented with a detailed analysis of capital and operating cost of the accelerator. The designed accelerator can treat up to 12 million gallons per day of wastewater, requires capital of $\sim\$$8M for construction, and has $\sim$13.5 cents/ton/kGy in material processing cost.

physics.acc-ph↗

The Preliminary design of DC Magnet Power Supply System for ITER Static Magnetic Field Test facility

ITER (International Thermonuclear Experimental Reactor) static magnetic field (SMF) test facility requires a DC power supply with low voltage, high current, and high stability. Due to the limitation ofswitching loss, there is a contradiction between the output current capability and the output ripple. Large output current usually leads to low switching frequency, and low switching frequency will generate a large number of harmonics. To solve the problems, a topology based on the interleaving parallel buck converter is used and tested in this paper. Moreover, the topology is realized with only a small number of switching metal-oxide-semiconductor field effect transistors (MOSFETs). This article introduces the system design scheme and control method in detail. The analysis of harmonic and simulation are carried out. The validity of proposed scheme and control strategy were confirmed by experiments, the power supply system can supply large current of 15kA and has ability of low ripple.

physics.ins-det↗

Space Charge Driven Emittance Growth and the Effect of Octupoles in IOTA

The Integrable Optics Test Accelerator (IOTA) at Fermilab is a small machine dedicated to a broad frontier accelerator physics program. An important aspect of this program is to investigate the potential benefits of the resonance free tune spread achievable with integrable optics to store and accelerate high intensity proton beams for which space charge is significant. In this context, a good understanding of proton beam emittance growth and particle loss mechanisms is essential. Assuming nominal design parameters, simulations show that for a bunched beam, the bulk of emittance growth takes place immediately following injection, typically within tens of turns. We attempt to account for this growth using a simplified RMS mismatch theory; some of its limitations and possible improvements are briefly discussed. We then compare theoretical predictions to simulations performed using the PIC code pyORBIT. Further exploring ways to mitigate emittance growth and reduce particle loss, we compare two beam matching strategies: (1) matching at the injection point (2) matching at the center of the nonlinear (octupole) insertion region where $β_x = β_y$. To observe how nonlinearity affects emittance growth and whether it dominates growth due to mismatch, we track two different distributions. Finally, we explore the potential of using octupoles in a quasi-integrable configuration to mitigate growth using a variety of initial distributions both at reduced and full intensities.

physics.acc-ph↗

Generic method to assess transmutation feasibility for nuclear waste treatment and application to irradiated graphite

Graphite-moderated nuclear reactors have already produced more than 250000 tons of irradiated nuclear graphite, or i-graphite, world-wide. The sustainability of this technology relies on the end-of-life management of its moderator, which is activated into a long-lived nuclear waste, by neutron fluxes, during operating time. In particular, C14 is created. Nuclear transmutation, enabled by laser-driven particle acceleration, has been envisioned as a potential novel treatment scheme for long-lived nuclear waste. By triggering controlled nuclear reactions with energetic particles, long-lived radionuclides could be transformed into stable isotopes. Such a system could treat the C14 nuclei trapped within the i-graphite matrix, which is difficult to isolate by other means. This work performs a quantitative preliminary study of this transmutation scheme, in order to assess its feasibility at an industrial scale. The method used can be transposed to assess any transmutation scheme using a beam of particles directly sent on the material to be treated. First, a nuclear interaction channel which transmutes C14 nuclei without creating new long-lived radionuclides is identified. It consists in the choice of a type of particle, among which protons, gamma photons and neutrons can all be accelerated by laser-matter interaction; and it is completed by the adequate energy at which this particle must be sent on i-graphite. To that end, the nuclear cross-sections of C12, C13 and C14 are reviewed, neglecting other impurities in i-graphite. Then, based on the interaction channel identification, the energy cost of this scheme is estimated. Protons between 1 and 5 MeV make it possible to transmute C14 without creating any new long-lived activity. However, our result show that, even in this favorable reaction channel, the transmutation energy cost is too high for an i-graphite transmutation scheme to be feasible.

physics.acc-ph↗

Development of a Virtual EM Detector for the Advanced Particle Accelerator Modeling Code WarpX

In physics research particle accelerators are highly valued, and extraordinarily expensive, technical instruments. The high cost of particle accelerators results from the immense lengths required to accelerate particles to high energies, using radio frequency cavities. A current promising field of research, laser-driven particle acceleration has the potential to reduce the size, cost, and energy consumption of particle accelerators by orders of magnitude. To understand and control particle acceleration in plasmas using ultra-small spatial configurations, researchers have been developing computational models to simulate the acceleration environment. Within these models, computational scientists have introduced virtual diagnostics to serve as the digital parallel to experimental detectors. Using WarpX\cite{Vay:2021}, an advanced Particle-in-Cell code that simulates laser-driven particle acceleration, we have developed a virtual diagnostic to measure electromagnetic radiation. Such radiation can for instance be produced from scattered and transmitted laser beams. This \textit{FieldProbe} diagnostic measures individual field components for electric and magnetic fields at a point or at all points along a specified geometry (line or plane). This diagnostic is GPU-accelerated and parallelized using the Message Passing Interface (MPI) and can thus run on High Performance Computing Centers such as NERSC.

physics.acc-ph↗

Time-dependent dynamical Bragg diffraction in deformed crystals by beam propagation method (BPM)

This paper describes how to efficiently solve time-dependent x-ray dynamic diffraction problems in distorted crystals with an FFT-based beam propagation method (FFT BPM). We show examples of using the technique to simulate the propagation of x-ray beams in deformed crystals in space and time domains relevant to the cavity-based x-ray Free Electron Lasers (CBXFELs) and XFEL self-seeding systems.

physics.comp-ph↗

Absorption of charged particles in Perfectly-Matched-Layers by optimal damping of the deposited current

Perfectly-Matched Layers (PML) are widely used in Particle-In-Cell simulations, in order to absorb electromagnetic waves that propagate out of the simulation domain. However, when charged particles cross the interface between the simulation domain and the PMLs, a number of numerical artifacts can arise. In order to mitigate these artifacts, we introduce a new PML algorithm whereby the current deposited by the macroparticles in the PML is damped by an analytically-derived, optimal coefficient. The benefits of this new algorithm is illustrated in practical simulations.

physics.plasm-ph↗

Advances in MgB$_2$ Superconductor Applications for Particle Accelerators

The MgB$_2$ superconductor, discovered in 2001, has provided unique compound features of magnesium diboride with much higher critical temperature and critical field compared to NbTi superconductor. Its applications have been expanding owing to its superior energy balance in high-temperature operation and to its excellent stability and operational margin because of the higher critical temperature and heat capacity. This paper reviews the recent advances in MgB$_2$ applications in the field of particle accelerators focusing on superconducting power transmission (superconducting link) and superconducting magnets, and also briefly discusses the future prospects and improvement expected such as radiation hardness issues and cost-effective fabrication for wider applications and industrialization.

physics.acc-ph↗

Multiple scattering of channeled and non-channeled positively charged particles in bent monocrystalline silicon

We present the results of an experimental study of multiple scattering of positively charged high energy particles in bent samples of monocrystalline silicon. This work confirms the recently discovered effect of a strong reduction in the rms multiple scattering angle of particles channeled in the silicon (111) plane. The effect is observed in the plane orthogonal to the bending plane. We show in detail the influence of angular constraints on the magnitude of the effect. Comparison of the multiple scattering process at different energies indicates a violation of the law of inverse proportionality of the rms angle of channeled particles with energy. By increasing the statistics, we have improved the results of multiple scattering measurements for particles moving, but not channeled, in silicon crystals.

physics.acc-ph↗

Measurement of high quality factor superconducting cavities in tesla-scale magnetic fields for dark matter searches

In dark matter searches using axion haloscopes, the search sensitivity depends on the quality factors ($Q_0$) of radiofrequency cavities immersed in multi-tesla magnetic fields. Increasing $Q_0$ would increase the scan rate through the parameter space of interest. Researchers developing superconducting radiofrequency cavities for particle accelerators have developed methods for obtaining extremely high $Q_0\sim10^{11}$ in $μ$T-scale magnetic fields. In this paper, we describe efforts to develop high Q cavities made from Nb$_3$Sn films using a technique developed for particle accelerator cavities. Geometry optimization for this application is explored, and two cavities are tested: an existing particle accelerator-style cavity and a geometry developed and fabricated for use in high fields. A quality factor of ($5.3\pm0.3$)$\times 10^5$ is obtained at 3.9~GHz and 6~T at 4.2~K.

physics.acc-ph↗

High precision scalable power converter for accelerator magnets

The lower conduction power losses and the positive temperature coefficient that favours parallel connections, make Silicon Carbide (SiC) metal oxide semiconductor field-effect transistors (MOSFETs) to be an excellent replacement of existing Silicon insulated gate bipolar transistors (IGBTs) technology. These characteristics combined with high switching frequency operation, enables the design of high-accuracy DC-DC converters with minimised filtering requirements. This paper investigates the design for a converter with high-accuracy current (0.9ppm) supplying a 0.05H electromagnetic load, aiming to achieve the accuracy without the use of active filters, by using SiC MOSFETs and a scalable module-based converter design.

physics.acc-ph↗

High-frequency structure design and RF stability analysis of a 4-vane radio frequency quadrupole with pi-mode stabilizer loops

Compact accelerator-based neutron source facilities are garnering attention and play an important and expanding role in material and engineering sciences, as well as in neutron science education and training. Neutrons are produced by bombarding a low-energy proton beam onto a beryllium or lithium target. In such an accelerator-based neutron source, a radio frequency quadrupole (RFQ) is usually utilized to accelerate a high-intensity proton beam to a few MeV. This study mainly covers the high-frequency structure design optimizations of a 4-vane RFQ with pi-mode stabilizer loops (PISLs) and its RF stability analysis. A 176 MHz RFQ accelerator is designed to operate at a 10% duty factor and could accelerate an 80 mA proton beam from 65 keV to 2.5 MeV within a length of 5.3 m. The adoption of PISLs ensures high RF stability, eases the operation of the accelerator, and implies less stringent alignment and machining tolerances.

physics.acc-ph↗

RF gymnastics with transfer matrices

We introduce transfer matrices to describe the motion of particles in the vicinity of the stable and unstable fixed points of longitudinal phase space and use them to analyze the transfer of bunches between radio-frequency systems operating at different harmonics and voltages. We then apply this formalism to analyze the decoherence due to amplitude-dependent tune shift on the asymptotically achievable longitudinal emittance and assess tolerances for the injection.

physics.acc-ph↗