SEARCH · arXiv Science

Results for “physics.chem-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

arXiv2014

Exciton propagation via quantum walks based on non-Hermitian coin flip operations

We examine the coherent propagation of the one-dimensional Frenkel exciton (correlated electron-hole pair system) based on a model of a quantum walker in multi-dimensional Hilbert space. The walk is governed by a non-Hermitian coin flip operation coupled to a generalized shift process. The dissipative coin flip operation is associated with amplitude leakages at occupied sites, typical of processes which occur when an exciton is transferred along dimer sites in photosynthetic protein complexes. We analyze the characteristics probability distribution of the one-dimensional quantum walk for various system parameters, and examine the complex interplay between non-Markovian signatures and amplitude leakages within the Hilbert position subspace. The visibility of topological defects such as exceptional points, and non-Markovian signatures via quantum tomography based spectroscopic measurements are discussed.

quant-ph↗

arXiv2013

Instrumental neutron activation analysis of an enriched 28Si single-crystal

The determination of the Avogadro constant plays a key role in the redefinition of the kilogram in terms of a fundamental constant. The present experiment makes use of a silicon single-crystal highly enriched in 28Si that must have a total impurity mass fraction smaller than a few parts in 109. To verify this requirement, we previously developed a relative analytical method based on neutron activation for the elemental characterization of a sample of the precursor natural silicon crystal WASO 04. The method is now extended to fifty-nine elements and applied to a monoisotopic 28Si single-crystal that was grown to test the achievable enrichment. Since this crystal was likely contaminated, this measurement tested also the detection capabilities of the analysis. The results quantified contaminations by Ge, Ga, As, Tm, Lu, Ta, W and Ir and, for a number of the detectable elements, demonstrated that we can already reach the targeted 1 ng/g detection limit.

physics.chem-ph↗

arXiv2013

Reduced Dimensionality (4,3)D-hnCOCANH Experiment: An Efficient Backbone Assignment tool for NMR studies of Proteins

Sequence specific resonance assignment and secondary structure determination of proteins form the basis for variety of structural and functional proteomics studies by NMR. In this context, an efficient standalone method for rapid assignment of backbone (1H, 15N, 13Ca and 13C') resonances and secondary structure determination of proteins has been presented here. Compared to currently available strategies used for the purpose, the method employs only a single reduced dimensionality (RD) experiment -(4,3)D-hnCOCANH and exploits the linear combinations of backbone (13Ca and 13C') chemical shifts to achieve a dispersion relatively better compared to those of individual chemical shifts (see the text) for efficient and rapid data analysis. Further, the experiment leads to the spectrum with direct distinction of self (intra-residue) and sequential (inter-residue) carbon correlation peaks; these appear opposite in signs and therefore can easily be discriminated without using an additional complementary experiment. On top of all this, the main strength of the method is its efficient and robust assignment strategy based on: (a) multiple, but unidirectional sequential 15N and 13C correlations (i-->i-1) and (b) the distinctive peak patterns of self and sequential peaks in different [(F1(13C)-F3(1H) and (F2(15N)-F3(1H)] planes of the 3D spectrum which enable ready identification of certain specific triplet sequences (see the text) and thus serve as check points for mapping the stretches of sequentially connected HSQC cross peaks on to the primary sequence for assigning the resonances sequence specifically. Overall, the standalone method presented here will be an important backbone assignment tool for structural and functional proteomics, protein folding, and drug discovery research programs by NMR.

physics.bio-ph↗

arXiv2017

The octet rule in chemical space: Generating virtual molecules

We present a generator of virtual molecules that selects valid chemistry on the basis of the octet rule. Also, we introduce a mesomer group key that allows a fast detection of duplicates in the generated structures. Compared to existing approaches, our model is simpler and faster, generates new chemistry and avoids invalid chemistry. Its versatility is illustrated by the correct generation of molecules containing third-row elements and a surprisingly adept handling of complex boron chemistry. Without any empirical parameters, our model is designed to be valid also in unexplored regions of chemical space. One first unexpected finding is the high prevalence of dipolar structures among generated molecules.

physics.chem-ph↗

arXiv2012

Simulating a burnt-bridges DNA motor with a coarse-grained DNA model

We apply a recently-developed coarse-grained model of DNA, designed to capture the basic physics of nanotechnological DNA systems, to the study of a `burnt-bridges' DNA motor consisting of a single-stranded cargo that steps processively along a track of single-stranded stators. We demonstrate that the model is able to simulate such a system, and investigate the sensitivity of the stepping process to the spatial separation of stators, finding that an increased distance can suppress successful steps due to the build up of unfavourable tension. The mechanism of suppression suggests that varying the distance between stators could be used as a method for improving signal-to-noise ratios for motors that are required to make a decision at a junction of stators.

physics.bio-ph↗

arXiv2013

Theoretical characterization of excitation energy transfer in chlorosome light-harvesting antennae from green sulfur bacteria

Chlorosomes are the largest and most efficient natural light-harvesting antenna systems. They contain thousands of pigment molecules - bacteriochlorophylls (BChls)- that are organized into supramolecular aggregates and form a very efficient network for excitonic energy migration. Here, we present a theoretical study of excitation energy transfer (EET) in the chlorosome based on experimental evidence of the molecular assembly. Our model for the exciton dynamics throughout the antenna combines a stochastic time propagation of the excitonic wave function with molecular dynamics simulations of supramolecular structure, and electronic structure calculations of the excited states. The simulation results reveal a detailed picture of the EET in the chlorosome. Coherent energy transfer is significant only for the first 50 fs after the initial excitation, and the wavelike motion of the exciton is completely damped at 100 fs. Characteristic time constants of incoherent energy transfer, subsequently, vary from 1 ps to several tens of ps. We assign the time scales of the EET to specific physical processes by comparing our results with the data obtained from time-resolved spectroscopy experiments.

physics.chem-ph↗

arXiv2014

Seeking for ultrashort "non-bonded" hydrogen-hydrogen contacts in some rigid hydrocarbons and their chlorinated derivatives

In this communication a systematic computational survey on some rigid hydrocarbon skeletons, e.g. half-cage pentacyclododecanes and tetracyclododecanes, and their chlorinated derivatives in order to seek for the so-called ultrashort "non-bonded" hydrogen-hydrogen contacts is done. It is demonstrated that upon a proper choice and modifications of the main hydrocarbon backbones, and addition of some chlorine atoms instead of the original hydrogen atoms in parts of the employed hydrocarbons, the resulting strain triggers structural changes yielding ultrashort hydrogen-hydrogen contacts with inter-nuclear distances as small as 1.38 Angstrom. Such ultrashort contacts are clearly less than the world record of an ultrashort non-bonded hydrogen-hydrogen contact, 1.56 Angstrom, very recently realized experimentally by Pascal and coworkers in in,in-bis(hydrosilane) [J. Am. Chem. Soc. 135, 13235 (2013)]. The resulting computed structures as well as the developed methodology for structure design open the door for constructing a proper set of molecules for future studies on the nature of the so-called non-bonded hydrogen-hydrogen interactions that is now an active and controversial area of research.

physics.chem-ph↗

arXiv2018

Study of various few-body systems using Gaussian expansion method (GEM)

We review our calculation method, Gaussian expansion method (GEM), and its applications to various few-body (3- to 5-body) systems such as 1) few-nucleon systems, 2) few-body structure of hypernuclei, 3) clustering structure of light nuclei and unstable nuclei, 4) exotic atoms/molecules, 5) cold atoms, 6) nuclear astrophysics and 7) structure of exotic hadrons. Showing examples in our published papers, we explain i) high accuracy of GEM calculations and its reason, ii) wide applicability of GEM and iii) successful predictions by GEM calculations before measurements. GEM was proposed 30 years ago and has been applied to a variety of subjects. To solve few-body Schroedinger equations accurately, use is made of the Rayleigh-Ritz variational method for bound states, the complex-scaling method for resonant states and the Kohn-type variational principle to S-matrix for scattering states. The total wave function is expanded in terms of few-body Gaussian basis functions spanned over all the sets of rearrangement Jacobi coordinates. Gaussians with ranges in geometric progression work very well both for short-range and long-range behavior of the few-body wave functions. Use of Gaussians with complex ranges gives much more accurate solution when the wave function has many oscillations.

nucl-th↗

arXiv2019

Simulation and Instability Investigation of the Flow around a Cylinder between Two Parallel Walls

The two-dimensional flows around a cylinder between two parallel walls at Re=40 and Re=100 are simulated with computational fluid dynamics (CFD). The governing equations are Navier-Stokes equations. They are discretized with finite volume method (FVM) and the solution is iterated with PISO Algorithm. Then, the calculating results are compared with the numerical results in literature, and good agreements are obtained. After that, the mechanism of the formation of Karman vortex street is investigated and the instability of the entire flow field is analyzed with the energy gradient theory. It is found that the two eddies attached at the rear of the cylinder have no effect on the flow instability for steady flow, i.e., they don't contribute to the formation of Karman vortex street. The formation of Karman vortex street originates from the combinations of the interaction of two shear layers at two lateral sides of the cylinder and the absolute instability in the cylinder wake. For the flow with Karman vortex street, the initial instability occurs at the region inner a vortex downstream of the wake and the center of a vortex firstly loses its stability inner a vortex. For pressure driven flow, it is confirmed that the inflection point on the time-averaged velocity profile leads to the instability. It is concluded that the energy gradient theory is potentially applicable to study the flow stability and to reveal the mechanism of turbulent transition.

physics.flu-dyn↗

arXiv2019

Effect of Rotational Speed on the Stability of Two Rotating Side-by-side Circular Cylinders at Low Reynolds Number

Flow around two rotating side-by-side circular cylinders of equal diameter D is numerically studied at the Reynolds number Re=40-200 and various rotation rate theta_i. The incoming flow is assumed to be two-dimensional laminar flow. The governing equations are the incompressible Navier-Stokes equations and solved by the finite volume method (FVM). The ratio of the center-to-center spacing to the cylinder diameter is T/D=2. The objective of the present work is to investigate the effect of rotational speed and Reynolds number on the stability of the flow. The simulation results are compared with the experimental data and a good agreement is achieved. The stability of the flow is analyzed by using the energy gradient theory, which produces the energy gradient function K to identify the region where the flow is the most prone to be destabilized and the degree of the destabilization. Numerical results reveal that K is the most significant at the separated shear layers of the cylinder pair. With Re increases, the length of the wake is shorter and the vortex shedding generally exhibits a symmetrical distribution for theta_i <theta_crit. It is also shown that the unsteady vortex shedding can be suppressed by rotating the cylinders in the counter-rotating mode.

physics.flu-dyn↗

arXiv2013

Stochastic Optimization Based Study of Dimerization Kinetics

We investigate the potential of numerical algorithms to decipher the kinetic parameters involved in multi-step chemical reactions. To this end we study a dimerization kinetics of protein as a model system. We follow the dimerization kinetics using a stochastic simulation algorithm and combine it with three different optimization techniques (Genetic Algorithm, Simulated Annealing and Parallel Tempering) to obtain the rate constants involved in each reaction step. We find good convergence of the numerical scheme to the rate constants of the process. We also perform a sensitivity test on the reaction kinetic parameters to see the relative effects of the parameters for the associated profile of the monomer/dimer distribution.

physics.bio-ph↗

arXiv2017

Time-dependent linear-response variational Monte Carlo

We present the extension of variational Monte Carlo (VMC) to the calculation of electronic excitation energies and oscillator strengths using time-dependent linear-response theory. By exploiting the analogy existing between the linear method for wave-function optimisation and the generalised eigenvalue equation of linear-response theory, we formulate the equations of linear-response VMC (LR-VMC). This LR-VMC approach involves the first-and second-order derivatives of the wave function with respect to the parameters. We perform first tests of the LR-VMC method within the Tamm-Dancoff approximation using single-determinant Jastrow-Slater wave functions with different Slater basis sets on some singlet and triplet excitations of the beryllium atom. Comparison with reference experimental data and with configuration-interaction-singles (CIS) results shows that LR-VMC generally outperforms CIS for excitation energies and is thus a promising approach for calculating electronic excited-state properties of atoms and molecules.

physics.chem-ph↗

arXiv2013

On the unique mapping relationship between initial and final quantum states

In its standard formulation, quantum mechanics presents a very serious inconvenience: given a quantum system, there is no possibility at all to unambiguously (causally) connect a particular feature of its final state with some specific section of its initial state. This constitutes a practical limitation, for example, in numerical analyses of quantum systems, which often make necessary the use of some extra assistance from classical methodologies. Here it is shown how the Bohmian formulation of quantum mechanics removes the ambiguity of quantum mechanics, providing a consistent and clear answer to such a question without abandoning the quantum framework. More specifically, this formulation allows to define probability tubes, along which the enclosed probability keeps constant in time all the way through as the system evolves in configuration space. These tubes have the interesting property that once their boundary is defined at a given time, they are uniquely defined at any time. As a consequence, it is possible to determine final restricted (or partial) probabilities directly from localized sets of (Bohmian) initial conditions on the system initial state. Here, these facts are illustrated by means of two simple yet physically insightful numerical examples: tunneling transmission and grating diffraction.

quant-ph↗

arXiv2014

Dissipative Bohmian mechanics within the Caldirola-Kanai framework: A trajectory analysis of wave-packet dynamics in viscid media

Classical viscid media are quite common in our everyday life. However, we are not used to find such media in quantum mechanics, and much less to analyze their effects on the dynamics of quantum systems. In this regard, the Caldirola-Kanai time-dependent Hamiltonian constitutes an appealing model, accounting for friction without including environmental fluctuations (as it happens, for example, with quantum Brownian motion). Here, a Bohmian analysis of the associated friction dynamics is provided in order to understand how a hypothetical, purely quantum viscid medium would act on a wave packet from a (quantum) hydrodynamic viewpoint. To this purpose, a series of paradigmatic contexts have been chosen, such as the free particle, the motion under the action of a linear potential, the harmonic oscillator, or the superposition of two coherent wave packets. Apart from their analyticity, these examples illustrate interesting emerging behaviors, such as localization by "quantum freezing" or a particular type of quantum-classical correspondence. The reliability of the results analytically determined has been checked by means of numerical simulations, which has served to investigate other problems lacking of such analyticity (e.g., the coherent superpositions).

quant-ph↗

arXiv2015

Full quantum mechanical analysis of atomic three-grating Mach-Zehnder interferometry

Atomic three-grating Mach-Zehnder interferometry constitutes an important tool to probe fundamental aspects of the quantum theory. There is, however, a remarkable gap in the literature between the oversimplified models and robust numerical simulations considered to describe the corresponding experiments. Consequently, the former usually lead to paradoxical scenarios, such as the wave-particle dual behavior of atoms, while the latter make difficult the data analysis in simple terms. Here these issues are tackled by means of a simple grating working model consisting of evenly-spaced Gaussian slits. As is shown, this model suffices to explore and explain such experiments both analytically and numerically, giving a good account of the full atomic journey inside the interferometer, and hence contributing to make less mystic the physics involved. More specifically, it provides a clear and unambiguous picture of the wavefront splitting that takes place inside the interferometer, illustrating how the momentum along each emerging diffraction order is well defined even though the wave function itself still displays a rather complex shape. To this end, the local transverse momentum is also introduced in this context as a reliable analytical tool. The splitting, apart from being a key issue to understand atomic Mach-Zehnder interferometry, also demonstrates at a fundamental level how wave and particle aspects are always present in the experiment, without incurring in any contradiction or interpretive paradox. On the other hand, at a practical level, the generality and versatility of the model and methodology presented, makes them suitable to attack analogous problems in a simple manner after a convenient tuning.

physics.atom-ph↗

arXiv2018

Main-chain poly(ionic liquid)-derived nitrogen-doped micro/mesoporous carbons for CO2 capture and selective aerobic oxidation of alcohols

Sustainable development and the recent fast growing global demands for energy and functional chemicals urgently call for effective methods for CO2 remediation and efficient metal-free catalysts for selective oxidation of aromatic alcohol. Herein, a unique main-chain poly(ionic liquid) (PIL) is employed as the precursor to prepare nitrogen doped micro and mesoporous carbons via simultaneous carbonization and activation, which bear high yield, large specific surface area above 1700 m2 per g and rich nitrogen dopant. The porous carbon products deliver a high CO2 adsorption capacity up to 6.2 mmol per g at 273 K and 1 bar with outstanding reversibility and satisfactory selectivity. Besides, they work excellently as metal free carbocatalysts for the selective aerobic oxidation of benzyl alcohol to benzaldehyde with high selectivity. It is believed that this work not only provides a facile approach to prepare nitrogen-doped porous carbon, but also advances the related research in the fields of environment and catalysis.

physics.chem-ph↗

arXiv2019

"Cooking carbon in a solid salt": Synthesis of porous heteroatom-doped carbon foams for enhanced organic pollutant degradation under visible light

Porous heteroatom-doped carbons are desirable for catalytic reactions due to their tunable physicochemical properties, low cost and metal-free nature. Herein, we introduce a facile general bottom-up strategy, so-called "cooking carbon in a solid salt", to prepare hierarchically porous heteroatom-doped carbon foams by using poly(ionic liquid) as precursor and common inorganic salts as structural template. The obtained carbon foams bear micro-/meso-/macropores, large specific surface area and rich nitrogen dopant. The combination of these favorable features facilitates the catalytic degradation of aqueous organic pollutants by persulfate under visible light irradiation, in which they prevail over the state-of-the-art metal-/carbon-based catalysts.

physics.chem-ph↗

arXiv2013

Molten salts database for energy applications

The growing interest in energy applications of molten salts is justified by several of their properties. Their possibilities of usage as a coolant, heat transfer fluid or heat storage substrate, require thermo-hydrodynamic refined calculations. Many researchers are using simulation techniques, such as Computational Fluid Dynamics (CFD) for their projects or conceptual designs. The aim of this work is providing a review of basic properties (density, viscosity, thermal conductivity and heat capacity) of the most common and referred salt mixtures. After checking data, tabulated and graphical outputs are given in order to offer the most suitable available values to be used as input parameters for other calculations or simulations. The reviewed values show a general scattering in characterization, mainly in thermal properties. This disagreement suggests that, in several cases, new studies must be started (and even new measurement techniques should be developed) to obtain accurate values.

physics.chem-ph↗