SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

arXiv2020

Scientific opportunies for bERLinPro 2020+, report with ideas and conclusions from bERLinProCamp 2019

The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL as driver for future light sources by setting up the bERLinPro (Berlin ERL Project) ERL with 50 MeV beam energy and high average current. The project is close to reach its major milestone in 2020, acceleration and recovery of a high brightness electron beam. The goal of bERLinProCamp 2019 was to discuss scientific opportunities for bERLinPro 2020+. bERLinProCamp 2019 was held on Tue, 17.09.2019 at Helmholtz-Zentrum Berlin, Berlin, Germany. This paper summarizes the main themes and output of the workshop.

physics.acc-ph↗

arXiv2019

Impact of high Q on ILC250 upgrade for record luminosities and path toward ILC380

In this paper, we address the possibility of upgrading the ILC250 luminosity to $8.1 \times 10^{34}$, so that with the polarization feature, the effective luminosity will be $2.0 \times 10^{35}$ to compete with the FCC-ee luminosity and two detectors. The additional cost of the higher luminosity option will be about 2.2 B ILCU. The total cost for the ILC high luminosity machine will therefore be about 7.7 B versus FCC-ee 10.5 B. The AC power (267 MW) to operate the ILC luminosity upgrade will also be less than the AC power for FCC-ee (300 MW). Even with a modest quality factor Q of $1 \times 10^{10}$ for SRF cavities, the total cost of the upgrade will be 2.5 B ILCU additional over ILC250 baseline. We expect that, if approved, ILC250 will first be built at the baseline luminosity, operated for many years at this luminosity, and later upgraded to the high luminosity option. A significant part (RF power and cryo-power) of the additional cost for the luminosity upgrade overlaps with the expected additional costs for anticipated energy upgrade paths. A second ILC upgrade discussed in this paper will be to the higher energy Top Factory at 380 GeV. We also estimate the additional cost of this upgrade (1.5 B ILCU).

physics.acc-ph↗

arXiv2019

A muon source based on planar channelling radiation

The usage of channelling radiation arising from a high energy electron beam traversing a crystal for the production of an intense low emittance muon beam is investigated. The optimal energy and divergence of the electron beam are computed for few crystal types based on analytical expressions of the radiation spectrum and of the muon pair production cross section. It is shown that the required beam properties seem within reach and that the source performance may be comparable to other muon sources currently considered.

physics.acc-ph↗

arXiv2019

The low level RT control system of PLS-II storage ring at 400 mA 3.0 GeV

The RF system for the Pohang Light Source (PLS) storage ring was greatly upgraded for PLS-II project of 400mA, 3.0GeV from 200mA, 2.5GeV. Three superconducting(SC) RF cavities with each 300kW maximum klystron amplifier were commissioned with electron beam in way of one by one during the last 3 years for beam current of 400mA to until March 2014. The RF system is designed to provide stable beam through precise RF phase and amplitude requirements to be less than 0.3% in amplitude and 0.3° in phase deviations. This paper describes the RF system configuration, design details and test results.

physics.acc-ph↗

arXiv2019

Analysis of Skin Effect in High Frequency Isolation Transformers

In this paper, a high frequency transformer with different conductors and winding arrangements, at presence of eddy currents and skin effect, is studied. By using different winding structures, and conductor types, such as circular, square shaped, and foil wires, the skin effect in the windings is studied and current density within the conductors at a high frequency of 20 MHz and a lower frequency of 20 kHz are investigated using finite element method (FEM) simulation. Moreover, magnetic field distribution in the transformers at 20 MHz is obtained and displayed. Also, magnetizing inductance, leakage inductance and AC winding resistance for all of the transformer types are found and compared, and frequency response for the transformers are obtained and shown. Lastly, based on the results, the skin effect increases the AC winding resistance and decreases the leakage inductance as the frequency increases. Furthermore, different winding arrangements, conductors, and transformer types show a wide range of parasitic and loss behavior, which enable the designers to compromise between various parameters in different applications, especially new fast switches such as SiC and GaN.

physics.ins-det↗

arXiv2019

Metamaterial insertions for resistive-wall beam-coupling impedance reduction

Resistive-wall impedance usually constitutes a significant percentage of the total beamcoupling impedance budget of an accelerator. Reduction techniques often entail high electrical-conductivity coatings. This paper investigates the use of negative-permittivity or negative-permeability materials for sensibly reducing or theoretically nearly cancelling resistive-wall impedance. The proposed approach is developed by means of an equivalent transmission-line model. The effectiveness of such materials is benchmarked for the negative permeability case with experimental measurements in two frequency bandwidths. This first-stage study opens the possibility of considering metamaterials for impedance mitigation.

physics.acc-ph↗

arXiv2019

SLAC UED LLRF System Upgrade

The SLAC mega-electron-volt (MeV) ultrafast electron diffraction (UED) instrument is a powerful "electron camera" for the study of time-resolved, ultrafast atomic & molecular dynamics in chemical and solid-state systems. The UED laser timing synchronization is upgraded to SLAC (Advanced Telecommunications Computing Architecture) ATCA based femtosecond laser timing synchronization system. UED radio frequency (RF) gun cavity low level RF (LLRF) control is also being upgraded to SLAC ATCA based LLRF system to provide improved performance and maintainability. The new laser timing synchronization and LLRF control are implemented in one ATCA crate located in the laser room. A 2nd ATCA crate is set up to monitor the Klystron and sub-booster performance. With the ATCA based RF control system, the laser timing jitter has achieved 10 fs. The UED operation beam rate is being upgraded from 180 Hz to 360 Hz, which paves the way for a further upgrade of operation beam rate to 1 kHz in the future. In this paper, we present design details and characterization results of the implementation.

physics.acc-ph↗

arXiv2019

Investigation on the Ion Motion towards Clearing Electrodes in High-Brightness Electron Accelerators

High-brightness electron beams provided by modern accelerators require several measures to preserve their high quality and to avoid instabilities. The mitigation of the impact of residual ions is one of these measures. It is particularly important if high bunch charges in combination with high repetition rates are aimed for. This is because ions can be trapped in the strong negative electrical potential of the electron beam causing emittance blow-up, increased beam halo and longitudinal and transverse instabilities. Over the last decades three ion-clearing strategies have been applied to counteract the degrading impact of the ions on the electron beam. These strategies are installation of clearing electrodes, introduction of gaps in filling pattern and beam shaking. Currently, their merit as clearing strategies for the next generation of high brightness accelerators such as energy recovery linacs (ERLs) are under intensive investigations by means of numerical and experimental studies. Of particular interest in this context is the performance of multi-purpose electrodes, which are designed such that they allow for a simultaneous ion-clearing and beam-position monitoring. Such electrodes will be installed in the bERLinPro facility. In this paper, we present numerical studies for the behavior of ions generated by electron bunches while passing through the field of clearing electrodes. The objective is to investigate the ion motion towards the electrodes and to study under which circumstances and up to which ratio an equilibrium between ion-generation and ion-clearing is established. Hereby, several ion species and configurations of electrodes are considered in combination with typical beam parameters of high-brightness electron accelerators. Furthermore, we present detailed numerical studies of the performance of multi-purpose clearing electrodes planned for bERLinPro.

physics.acc-ph↗

arXiv2019

Software Development for APS-Upgrade LLRF

An extensive service-based software system has been developed for real-time data acquisition (DAQ) on numerous subsystems of the Advanced Photon Source (APS) accelerator. The software, called DAQ, is based upon EPICS 3 Area-Detector with added EPICS 4 services, with EPICS 3 + 4 being called EPICS 7. DAQ is comprised of several network services including file storage and processing as well as numerous EPICS 7 Input-Output Controller (IOC) applications that collect data and publish to EPICS 7 from accelerator subsystems, including power supplies, diagnostics, timing, and RF systems. For the APS upgrade extensions to the DAQ software have been developed for digital Low Level RF (LLRF) systems supporting multiple hardware platforms including Lawrence Berkeley Laboratory's LLRF4 hardware and Micro Telecommunications Computing Architecture. EPICS 7 IOCs for LLRF run on multiple threads for real-time data collection, visualization , system control, and data file storage that can be triggered on accelerator beam dumps for system debug. A Python-based oscilloscope application has been developed for real-time data visualization.

physics.ins-det↗

arXiv2019

Control algorithm tests using a virtual CW SRF cavity

Superconducting cavities (SRF) are widely used in new generation particle accelerators, increasing the requirements and specifications for new designs. The LLRF control system, including the detuning control due to mechanical perturbations, must fulfill more exigent specifications, and its design have gained increasing relevance. The Helmhoz Zentrum Berlin, among others, have been working in the development of simulation and Hardware-in-the-loop tools to facilitate the test of control algorithms. The main goal of this work is to use an existing cavity model in CW mode, a Tesla cavity including a Saclay style piezo-tuner, and simulation tools to compare and test different control strategies focused in the detuning reduction, specially microphonics. The design process consist of the use of pure simulation environment based on Matlab/Simulink, where the mathematical model includes a cavity model, a LLRF control system and detuning control strategies, considering the mentioned actuator. Different control strategies are considered for the RF and mechanical parts: perturbation reduction by PID based feedback loops, adaptive feedforward algorithms, and active disturbance rejection techniques (ADRC). The aim is the performance comparison of the different algorithms with different perturbations, by using realistic cavity models which include Lorenz force detuning, microphonics derived from the cryogenic module and so forth. The simulation environment allows the inclusion of other effects as the non-collocated control problem.

physics.acc-ph↗

arXiv2019

Compensated Phase Jump at Transition Crossing in the CERN PS

The transition energy must be crossed in the CERN PS to accelerate proton and ion beams to flat-top energy. A phase jump of the accelerating RF voltage with respect to the phase of the bunches by about 180 degrees minus twice the synchronous phase is required at the instant of transition. This phase offset is injected into the beam phase loop which locks the phase of the vector sum of the RF voltage in the cavities to the beam. The polarities of the cavity return signal and of the stable phase programme are usually flipped at transition. However, both actions are difficult to perfectly synchronize in time, causing the beam phase loop to partially lock out and relock at the new stable phase. The resulting glitch can be avoided by well-controlled phase jumps applied to both, cavity drive and return signals simultaneously. This improved implementation of transition crossing makes it virtually transparent to the beam phase loop. The new scheme has been successfully tested with proton and ion beams, and it will become fully operational in the CERN PS after the long shutdown.

physics.acc-ph↗

arXiv2019

Achievements and New Challenges for CERN's Digital LLRF Family

An innovative digital Low-Level RF (LLRF) family has been developed at CERN and deployed on several circular machines. Operation of CERN's PS Booster (PSB), Low Energy Ion Ring (LEIR) and Extra Low ENergy Antiproton (ELENA) ring all reaped great benefit from the flexibility and processing power of this new family. Beam and cavity feedback loops have been implemented, as well as bunch shaping, longitudinal blowup and bunch splitting. For ELENA, longitudinal diagnostics such as bunched beam intensity and bunch length measurements have also been deployed. During Long Shutdown 2 (LS2) the ferrite-based High-Level RF (HLRF) systems of the Antiproton Decelerator (AD) and of the four-ring PSB will be replaced with Finemet-based HLRF. This will require a new LLRF system for the AD and deep upgrades to the existing PSB LLRF systems. This paper gives an overview of the main results achieved by the digital LLRF family so far and of the challenges the LLRF team will take on during LS2.

physics.acc-ph↗

arXiv2019

Impedance reduction of the High-frequency Cavities in the CERN PS by Multi-harmonic Feedback

In the framework of the "LHC Injectors Upgrade" (LIU) project, the CERN Proton Synchrotron (PS) is being prepared as a pre-injector for the Large Hadron Collider at high luminosity (HL-LHC). RF systems at 20 MHz, 40 MHz and 80 MHz are required for longitudinal beam manipulations to provide 25 ns bunch spacing and short bunches at transfer to the Super Proton Synchrotron (SPS). Beam induced voltage in these cavities causes transient beam-loading and uncontrolled longitudinal emittance blow-up. To reduce the impedance beyond the reach of the wide-band feedback around the power amplifier, a new multi-harmonic feedback has been developed and commissioned. Based on narrow-band filters treating each revolution frequency harmonic separately, the feedback phase at these harmonics can be dynamically adapted during acceleration, taking into account the phase of the cavity transfer function. The beneficial effect on longitudinal beam quality of LHC-type beams is shown.

physics.acc-ph↗

arXiv2019

Waveform Feature Implementation for FRIB LLRF Controllers

Waveform feature is one of the requirements for the FRIB LLRF controllers. It is desired that the LLRF con-trollers store the internal data (e.g. the amplitude and phase information of forward/reverse/cavity signals) for at least one second of sampled data at the RF feedback control loop rate (around 1.25 MHz). One use case is to freeze the data buffer when an interlock event happens and read out the fast data to diagnose the problem. An-other use case is to monitor a set of signals at a decimated rate (user settable) while the data buffer is still running, like using an oscilloscope. The detailed implementation will be discussed in the paper, including writing data into the DDR memory through the native interface, reading out the data through the bus interface, etc.

physics.ins-det↗

arXiv2019

Modeling of H- ion source at LANSCE

We report on the progress in modelling performance of the H- ion source at LANSCE. The key aspect we address is the lifetime of the tungsten filament. The lifetime depends on multiple parameters of the ion source and can dramatically vary in different regimes of operation. We use the multiphysics approach to model the performance of the ion source. The detailed analysis has been made to recognize key physical processes, which affect the degradation of the filament. The analysis resulted in the analytical model, which includes relevant processes from the first principles. The numerical code based on this model has been developed and benchmarked. The results of the modelling show good agreement with experimental data. As a result, the developed model allows predicting the performance of the ion source in various regimes of operation.

physics.acc-ph↗

arXiv2019

Ponderomotive Instability of RF Cavities with Vector Sum Control, and Cure By Difference Control

The radiation pressure inside an RF cavity resonator, resulting from the Lorentz force, couples the fundamental electromagnetic mode to the mechanical modes and may lead to static and dynamic ponderomotive instability. The analysis for generator driven (GD) cavity and for self-excited (SEL) cavity was given by Schulze in 1971 and by Delayen in 1978, respectively. Since that time, little or no new analytical work - until now. Here are presented results from the analysis for multiple (N) cavities (GD or SE) powered from a single source and regulated in vector sum. The system behaves as N virtual cavities, one with all loops present and N-1 with no loops except the tuner. After reviewing stability threshold criteria for these systems, difference control in the tuning loops is proposed as means for extending the stability range. Counter-tuning of alternating cavities is also discussed.

physics.acc-ph↗

arXiv2019

Low phase noise master oscillator generation and distribution for ALS and ALS-U

The coax based MO distribution system in the ALS is going to be replaced by a modernized, lower phase noise and more interference tolerant version, ready to support ALS-U operation. System aspects are shown and several commercial analog and digital optical transceiver modules are compared for their suitability in this application. Furthermore, recent phase noise optimizing efforts in the ALS RF system are discussed and several prototypes for a custom built, low phase noise, frequency adjustable master oscillator around 500 MHz are shown.

physics.acc-ph↗

arXiv2019

Digital Low-Level RF control system for Advanced Light Source Storage Ring

We have commissioned the digital Low Level RF (LLRF) system for storage ring RF at Advanced Light Source at Lawrence Berkeley National Lab (LBNL). The system is composed of 42 synchronous sampling channels for feedback control, diagnostics, and interlocks. The closed loop RF amplitude and phase stability is measured as < 0.1% and < 0.1 degree respectively, and the real-time machine protection interlock latency is measured < 2.5 microsecond. We have also developed PLC-FPGA-EPICS interfaces to support system configurations between hybrid operation modes using two klystrons driving two RF cavities at 500MHz resonance frequency. The deployed LLRF system has been operating since March 2017.

physics.acc-ph↗