SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

arXiv2019

Plasma Wakefield Accelerator Research 2019 - 2040: A community-driven UK roadmap compiled by the Plasma Wakefield Accelerator Steering Committee (PWASC)

The acceleration gradients generated in a laser- or beam-driven plasma wakefield accelerator are typically three orders of magnitude greater than those produced by a conventional accelerator, and hence plasma accelerators can open a route to a new generation of very compact machines. In addition, plasma-based accelerators can generate beams with unique properties, such as tens of kiloamp peak currents, attosecond bunch duration, ultrahigh brightness and intrinsic particle beam-laser pulse synchronization. In this roadmap we review the status of plasma accelerator research in the UK. We outline potential applications, describe the research and development required to enable those applications, and discuss synergies with related areas of research. We also set-out the resources required to realise these ambitions and provide a timeline for advances in the key areas.

physics.acc-ph↗

arXiv2019

Beam blowup due to synchro-beta resonance with/without beam-beam effects

A blowup of vertical emittance has been observed in particle tracking simulations with beam-beam and lattice misalignments. It was somewhat unexpected, since estimation without lattice errors did not predict such a blowup unless a residual vertical dispersion at the interaction point (IP) is larger than a certain amount. Later such a blowup has been seen in a tracking of lattices without beam-beam effect. A possible explanation of the blowup is given by a Vlasov model for an equilibrium of quadratic transverse moments in the synchrotron phase space. This model predicts such a blowup as a synchro-beta resonance mainly near the first synchrotron sideband of the main x-y coupling resonance line.

physics.acc-ph↗

arXiv2019

Highlights from SuperKEKB Phase 2 Commissioning

SuperKEKB is an electron-positron asymmetric-energy collider to search new physics phenomena appeared in B-meson decays. In order to accomplish this purpose, 40 times the luminosity as high as the KEKB collider is demanded. The strategy is that the vertical beta function at the IP is squeezed down to 1/20 and the beam currents double those of KEKB while keeping the same beam-beam parameter. The vertical beta function at the interaction point(IP) will be much smaller than the bunch length, however, the hourglass effect which degrades the luminosity will be reduced by adopting a novel "nano-beam" scheme. First of all, the Phase 2 commissioning was focused on the verification of nano-beam scheme. Secondary, beam related background at the Belle II detector was also studied for the preparation of the pixel vertex detector installed before the Phase 3 operation. The preliminary results and accomplishments of the commissioning in Phase 2 will be reported in this article.

physics.acc-ph↗

arXiv2019

Beam-beam Blowup in the presence of x-y coupling sources at FCC-ee

FCC-ee, the lepton version of the Future Circular Collider (FCC), is a 100 Km future machine under study to be built at CERN. It acquires two experiments with a highest beam energy of 182.5 GeV. FCC-ee aims to operate at four different energies, with different luminosities to fulfil physics requirements. Beam-beam effects at such a high energy/luminosity machine are very challenging and require a deep understanding, especially in the presence of x-y coupling sources. Beam-beam effects include the beamstrahlung process, which limits the beam lifetime at high energies, as well as dynamic effects at the Interaction point (IP) which include changes in the beta functions and emittances. In this report, we will define the beam-beam effects and their behaviours in the FCC-ee highest energy lattice after introducing x-y coupling in the ring.

physics.acc-ph↗

arXiv2019

Full Scale Proton Beam Impact Testing of new CERN Collimators and Validation of a Numerical Approach for Future Operation

New collimators are being produced at CERN in the framework of a large particle accelerator upgrade project to protect beam lines against stray particles. Their movable jaws hold low density absorbers with tight geometric requirements, while being able to withstand direct proton beam impacts. Such events induce considerable thermo-mechanical loads, leading to complex structural responses, which make the numerical analysis challenging. Hence, an experiment has been developed to validate the jaw design under representative conditions and to acquire online results to enhance the numerical models. Two jaws have been impacted by high-intensity proton beams in a dedicated facility at CERN and have recreated the worst possible scenario in future operation. The analysis of online results coupled to post-irradiation examinations have demonstrated that the jaw response remains in the elastic domain. However, they have also highlighted how sensitive the jaw geometry is to its mounting support inside the collimator. Proton beam impacts, as well as handling activities, may alter the jaw flatness tolerance value by $\pm$ 70 $μ$m, whereas the flatness tolerance requirement is 200 $μ$m. In spite of having validated the jaw design for this application, the study points out numerical limitations caused by the difficulties in describing complex geometries and boundary conditions with such unprecedented requirements.

physics.acc-ph↗

arXiv2019

Finding beam loss locations in a linac with oscillating dipole correctors

The paper proposes a method of finding the beam loss locations in a linac. If the beam is scraped at an aperture limitation, moving its centroid with two dipole correctors located upstream and oscillating in sync produces a line at the corresponding frequency in spectra of current-sensitive devices downstream of the loss point. The phase of this signal contains information about the location of the beam loss. Similar lines appear also in the position signals of Beam Position Monitors (BPMs). The phases of the BPM position lines change monotonically (within each 2π) along the linac and can be used a reference system. The phase of the loss signal compared with this reference system pinpoints the beam loss location, assuming that longitudinal coordinates of the BPMs are known. If the correctors deflection amplitudes and the phase offset between their waveforms are chosen optimally and well calibrated, the same measurement provides values of the \b{eta}-function and the betatron phase advance at the BPM locations. Optics measurements of this type can be made parasitically, with negligible effect on the emittance, if a long measurement time is acceptable.

physics.acc-ph↗

arXiv2019

Strong energy enhancement in a laser-driven plasma-based accelerator through stochastic friction

Conventionally, friction is understood as an efficient dissipation mechanism depleting a physical system of energy as an unavoidable feature of any realistic device involving moving parts, e.g., in mechanical brakes. In this work, we demonstrate that this intuitive picture loses validity in nonlinear quantum electrodynamics, exemplified in a scenario where spatially random friction counter-intuitively results in a highly directional energy flow. This peculiar behavior is caused by radiation friction, i.e., the energy loss of an accelerated charge due to the emission of radiation. We demonstrate analytically and numerically how radiation friction can enhance the performance of a specific class of laser-driven particle accelerators. We find the unexpected directional energy boost to be due to the particles' energy being reduced through friction whence the driving laser can accelerate them more efficiently. In a quantitative case we find the energy of the laser-accelerated particles to be enhanced by orders of magnitude.

physics.acc-ph↗

arXiv2019

Generalizing the Method of Images for Complex Boundary Conditions : Application on the LHC Beam Screen

This paper seeks to show that the beam screen of the LHC has an important effect on the electric field of the LHC beam, a few tens of sigmas away from its center. To do so, we develop two new methods for finding the effect of a complex conducting boundary for boundary value problems in electrostatics. Both methods are based on a generalization of the method of images and require low computing power. The result is an exact solution to the problem of a discretized conducting boundary, which we take to be an approximation of the real solution. As an application, we compute the total electric field inside the LHC beam screen and show that neglecting the effect of the conducting boundary is only accurate to 1% for locations closer than 10$σ$ from the center of the beam, and only accurate to 10% for locations closer than 30$σ$.

physics.comp-ph↗

arXiv2019

From ultracold electrons to coherent soft X-rays

Electromagnetic radiation in the soft x-ray spectral range ($1-100~\rm{nm}$ wavelengths or $0.01-1~\rm{keV}$ photon energies) is rapidly gaining importance in both fundamental research and industrial applications. At present the degree of coherence and the average photon flux required by advanced applications is only available at large-scale synchrotron facilities and Free Electron Lasers (FELs), severely limiting the range of applications. We propose a fully coherent soft x-ray source, based on Inverse Compton Scattering (ICS) of electron bunches created by photoionization of a laser-cooled and trapped atomic gas. By combining spatial modulation of the photoionization process with radiofrequency bunch compression techniques, micro-bunching at soft x-ray wavelengths and thus coherent amplification can be realised, resulting in a soft x-ray table-top Compton light source.

physics.acc-ph↗

arXiv2019

Stimulated Generation of Magnetrons powered below the Self-Excitation Threshold Voltage

Modern CW or pulsed superconducting accelerators of megawatts beams require efficient RF sources controllable in phase and power. It is desirable to have an individual RF power source with power up to hundreds of kW for each Superconductive RF (SRF) cavity. For pulsed accelerators the pulse duration in millisecond range is required. The efficiency of the traditional RF sources (klystrons, IOTs, solid-state amplifiers) in comparison to magnetrons is lower and the cost of unit of RF power is significantly higher. Typically, the cost of RF sources and their operation is a significant part of the total project cost and operation. The magnetron-based RF sources with a cost of power unit of 1-3 dollars per Watt would significantly reduce the capital and operation costs in comparison with the traditional RF sources. This arouses interest in magnetron RF sources for use in modern accelerators. A recently developed kinetic model describing the principle of magnetron operation and subsequent experiments resulted in an innovative technique producing the "stimulated" generation of magnetrons powered below the self-excitation threshold voltage. The magnetron operation in this regime is stable, low noise, controllable in phase and power, and provides higher efficiency than other types of RF power sources. It allows operation in CW and pulse modes (at large duty factor). For pulsed operation this technique does not require pulse modulators to form RF pulses. It also looks as a promising opportunity to extend magnetron life time. The developed technique, its experimental verification and a brief explanation of the kinetic model substantiating the technique are presented and discussed in this article.

physics.acc-ph↗

arXiv2021

Luminosity and Physics Considerations on HL-LHC and HE-LHC based mu-p Colliders

Construction of future Muon Collider tangential to the Large Hadron Collider will give opportunity to realize mu-p collisions at multi-TeV center of mass energies. Using nominal parameters of high luminosity and high energy upgrades of the LHC, as well as design parameters of muon colliders, it is shown that L_mu-p of order of 10^33 cm^-2s^-1 is achievable for different options with sqrt(s)_mu-p from 4.58 TeV to 12.7 TeV. Certainly, proposed mu-p colliders have a huge potential for clarifying QCD basics and searches for new physics.

physics.acc-ph↗

arXiv2019

Positron driven muon source for a muon collider

The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D.

physics.acc-ph↗

arXiv2019

OPAL a Versatile Tool for Charged Particle Accelerator Simulations

Many sophisticated computer models have been developed to understand the behaviour of particle accelerators. Even these complex models often do not describe the measured data. Interactions of the beam with external fields, other particles in the same beam and the beam walls all present modelling challenges. These can be challenging to model correctly even with modern supercomputers. This paper describes OPAL (Object Oriented Parallel Accelerator Library), a parallel open source tool for charged-particle optics in linear accelerators and rings, including 3D space charge. OPAL is built from the ground up as a parallel application exemplifying the fact that high performance computing is the third leg of science, complementing theory and experiment. Using the MAD language with extensions, OPAL can run on a laptop as well as on the largest high performance computing systems. The OPAL framework makes it easy to add new features in the form of new C++ classes, enabling the modelling of many physics processes and field types. OPAL comes in two flavours: OPAL-cycl: tracks particles with 3D space charge including neighbouring turns in cyclotrons and FFAs with time as the independent variable. OPAL-t: models beam lines, linacs, rf-photo injectors and complete XFELs excluding the undulator. The code is managed through the git distributed version control system. A suite of unit tests have been developed for various parts of OPAL, validating each part of the code independently. System tests validate the overall integration of different elements.

physics.acc-ph↗

arXiv2019

Theoretical and experimental electron diffraction intensity maps for single crystal silicon from an ultrafast source

Electron diffraction through a thin patterned silicon membrane can be used to create complex spatial modulations in electron distributions by varying the intensity of different reflections using parameters such as crystallographic orientation and wafer thickness, then selecting specific spots in the diffraction plane using apertures. The patterned electron beams can be used to control phase and amplitude of subsequent x-ray emission, enabling novel coherent x-ray methods. The electrons themselves can also be used for femtosecond time resolved diffraction and microscopy. As a first step toward patterned beams, we demonstrate experimentally and through simulation the ability to accurately predict and control diffraction spot intensities. We simulate MeV transmission electron diffraction patterns using the multislice method for various crystallographic orientations of a single crystal Si(100) membrane near beam normal. The resulting intensity maps of the Bragg reflections are compared to experimental results obtained at the Accelerator Structure Test Area Ultrafast Electron Diffraction (ASTA UED) facility at SLAC. Furthermore, the fraction of inelastic and elastic scattering of the initial charge is estimated along with the absorption of the membrane to determine the contrast that would be seen in a patterned version of the Si(100) membrane.

physics.acc-ph↗

arXiv2019

A primary electron beam facility at CERN

This paper describes the concept of a primary electron beam facility at CERN, to be used for dark gauge force and light dark matter searches. The electron beam is produced in three stages: A Linac accelerates electrons from a photo-cathode up to 3.5 GeV. This beam is injected into the Super Proton Synchrotron, SPS, and accelerated up to a maximum energy of 16 GeV. Finally, the accelerated beam is slowly extracted to an experiment, possibly followed by a fast dump of the remaining electrons to another beamline. The beam parameters are optimized using the requirements of the Light Dark Matter eXperiment (LDMX) as benchmark.

physics.acc-ph↗

arXiv2019

Interaction between high intensity beam and structure resonances

With the help of the linearized perturbation theory, the collective beam instability due to the space charge, modelled by the Vlasov-Poisson equation, is well studied in the former research theoretically in a general sense [Chao Li and R. A. Jameson PRAB, 21, 024204 (2018)], where the related instability is depicted by the "structure resonance". As an extension of the theoretical study, this paper aims to verify the validity of the structure resonance with numerical simulations and to show the basic principles which interpret the interaction between structure resonance and beam in a general sense. It is found that the reaction of beam to the structure resonance ($nσ\approx 180^\circ$) differs for the cases with $n= 0$ and $n\ne 0$ stop bands. The non-resonant "plasma oscillation" is also revisited; the "phase space mixing", lying in the transient plasma oscillation, is the mechanism that ties the resonant effects, non-resonant effects and macroscopic beam phenomena together.

physics.acc-ph↗

arXiv2019

RMATE: A device to test radiation-induced effects under controlled magnetic field and temperature

This study shows the development and performance assessment of a novel set-up that enables the research of structural materials for fusion reactors, by making possible simultaneous application of temperature (up to 450$^{\circ}$C) and magnetic field (close to 0.6 T) during irradiation experiments. These aspects become critical as structural materials in fusion reactors are exposed to intense radiation levels under the presence of strong magnetic fields. Moreover, material microstructural could be modified by radiation-induce propagating defects, which are thought to be sensitive to magnetic field. The device has three main components: magnetic closure, sample holder with integrated heater, and radiation shield. It is provided with a thermal shield to prevent other elements of the device to heat up and fail. A mapping of the magnetic flux in the region where sample and heater are located has been modeled by finite elements simulation software and correlated with magnetic measurements

physics.ins-det↗

arXiv2019

Nanopatterned electron beams for temporal coherence and deterministic phase control of x-ray free-electron lasers

We demonstrate the ability to create electron beams with high-contrast, nanometer-scale density modulations as a first step toward developing full control of the phase fronts of an x-ray free-electron laser. The nanopatterned electron beams are produced by diffracting electrons through thin single-crystal silicon membranes that are lithographically patterned to different thicknesses. For transform-limited x-ray production the desired pattern is a series of regularly spaced lines (i.e. a grating) that generate uniformly spaced nanobunches of electrons, however nearly any pattern can be etched in the silicon, such as frequency-chirps or multiple patterns of different colors or line spacings. When these patterns are transferred from the spatial to the temporal dimension by accelerator electromagnetic optics they will control the phase fronts of coherent x-rays, giving unprecedented deterministic control over the phase of ultrashort x-ray pulses. In short, this method allows the time-structure for a fully coherent x-ray beam to be generated from a pattern written on a semiconductor wafer by lithography.

physics.acc-ph↗