arXiv Science⌕ Search

SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
arXiv2019

Very high brightness and power LCLS-II hard X-ray pulses

We show the feasibility of generating X-ray pulses in the 4 to 8 keV fundamental photon energy range with 0.65 TW peak power, 15 fs pulse duration, $9\times10^{-5}$ bandwidth, using the LCLS-II copper linac and hard X-ray (HXR) undulator. Third harmonic pulses with 8-12 GW peak power and narrow bandwidth are also generated. High power and small bandwidth X-rays are obtained using two electron bunches separated by about 1 ns, one to generate a high power seed signal, the other to amplify it by tapering the magnetic field of the HXR undulator. The bunch delay is compensated by delaying the seed pulse with a four crystals monochromator. The high power seed leads to higher output power and better spectral properties, with $>$94\% of the X-ray power being within the near transform limited bandwidth. We discuss some of the experiments made possible by X-ray pulses with these characteristics, like single particle imaging and high field physics.

physics.acc-ph↗
arXiv2018

A doubly-magic storage ring EDM measurement method

This paper discusses "doubly-magic trap" operation of storage rings with superimposed electric and magnetic bending, to allow the spins of beams of different particle type to be frozen (i.e. both magic) simultaneously. A few doubly-magic cases have been found; one has 86.62990502 MeV frozen spin protons and 30.09255159 MeV frozen spin positrons (with accuracies matching their known magnetic moments) counter-circulating in the same storage ring. (Assuming zero positron EDM value) the positron beam can be used to null the radial magnetic field, enabling the proton EDM to be measured free of the dominant systematic error. The same trick, using 38.6 MeV protons and 39.2 MeV helions (He3) yields the difference of proton and helion EDMs---any measureably large difference would represent physics beyond the standard model---using an inexpensive 10 m bending radius storage ring, and already-proven operational spin control technology.

physics.acc-ph↗
arXiv2018

The Compact Linear e$^+$e$^-$ Collider (CLIC): Accelerator and Detector

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear e$^+$e$^-$ collider under development by international collaborations hosted by CERN. This document provides an overview of the design, technology, and implementation aspects of the CLIC accelerator and the detector. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, for a site length ranging between 11 km and 50 km. CLIC uses a two-beam acceleration scheme, in which normal-conducting high-gradient 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments, and system tests have resulted in significant progress in recent years. Moreover, this has led to an increased energy efficiency and reduced power consumption of around 170 MW for the 380 GeV stage, together with a reduced cost estimate of approximately 6 billion CHF. The detector concept, which matches the physics performance requirements and the CLIC experimental conditions, has been refined using improved software tools for simulation and reconstruction. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. The construction of the first CLIC energy stage could start as early as 2026 and first beams would be available by 2035, marking the beginning of a physics programme spanning 25-30 years and providing excellent sensitivity to Beyond Standard Model physics, through direct searches and via a broad set of precision measurements of Standard Model processes, particularly in the Higgs and top-quark sectors.

physics.acc-ph↗
arXiv2019

Algorithms and Methods for High Precision Computer Simulations of Cyclotrons for Proton Therapy: The Case of SC202

Effective and accurate computer simulations are highly important in accelerator design and production. The most difficult and important task in cyclotron development is magnetic field simulations. It is necessary to achieve the accuracy of the model that is higher than the tolerance for the magnetic field in the real magnet. An accurate model of the magnet and other systems of the cyclotron allows us to perform beam tracking through the whole accelerator from the ion source to extraction. While high accuracy is necessary in the late stages of research and development, high performance of the simulations and ability to swiftly analyze and apply changes to the project play a key role in the early stages of the project. Techniques and algorithms for high accuracy and performance of the magnet simulations have been created and used for the development of the SC202 cyclotron for proton therapy, which is under production by collaboration between JINR (Dubna, Russia) and ASIPP (Hefei, China).

physics.acc-ph↗
arXiv2019

Feasibility Study for an EDM Storage Ring

This project exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM, $\vec d$) aligned along the particle spin axis. Statistical sensitivities can approach $10^{-29}$~e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarization, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarization ($\vec d \times\vec E$). The slow rise in the vertical polarization component, detected through scattering from a target, signals the EDM. The project strategy is outlined. It foresees a step-wise plan, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal-plane polarization lifetimes, and control of the polarization direction through feedback from the scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally the high precision electric-field storage ring.

physics.acc-ph↗
arXiv2018

AWAKE: On the path to particle physics applications

Proton-driven plasma wakefield acceleration allows the transfer of energy from a proton bunch to a trailing bunch of particles, the `witness' particles, via plasma electrons. The AWAKE experiment at CERN is pursuing a demonstration of this scheme using bunches of protons from the CERN SPS. Assuming continued success of the AWAKE program, high energy electron or muon beams will become available, opening up an extensive array of future particle physics projects from beam dump searches for new weakly interacting particles such as Dark Photons, to fixed target physics programs, to energy frontier electron-proton, electron-ion, electron-positron and muon colliders. The time is right for the particle physics community to offer strong support to the pursuit of this new technology as it will open up new avenues for high energy particle physics.

physics.acc-ph↗
arXiv2018

Beam break-up current limit in multi-turn ERLs and CBETA

This paper uses theory and simulation of the Beam Break-Up instability (BBU) for multi-turn ERLs to determine and to optimize the current limit of the Cornell Brookhaven Energy-Recovery-Linac Test Accelerator (CBETA). Currently under construction at Cornell University's Wilson Laboratory, the primary structures of CBETA for beam recirculation include the Main Linac Cryomodule and the Fixed Field Alternating Gradient beamline. As the electron bunches pass through the MLC cavities, Higher Order Modes (HOMs) are excited. The recirculating bunches return to the cavities to further excite HOMs, and this feedback loop can give rise to BBU. We will first explain how BBU effect is simulated using the tracking software BMAD, and check the agreement with the BBU theory for the most instructive cases. We then present simulation results on how BBU limits the maximum achievable current of CBETA with different HOM spectra in the cavities. Lastly we investigate ways to improve the threshold current of CBETA.

physics.acc-ph↗
arXiv2019

Achievement of Ultra-High Quality Factor in Prototype Cryomodule for LCLS-II

Quality factor is a primary cost driver for high energy, continuous wave (CW) SRF linacs like the LCLS-II X-ray free electron laser currently under construction. Taking this into account, several innovations were introduced in the LCLS-II cryomodule design to push substantially beyond the previous state-of-the-art quality factor achieved in operation. This includes the first ever implementation of the nitrogen doping cavity treatment, the capability to provide high mass flow cooldown to improve expulsion of magnetic flux based on recent R&D, high performance magnetic shielding, and other critical subcomponents. To evaluate the implementation of these new cryomodule features, two prototype cryomodules were produced. In this paper, we present results from the prototype cryomodule assembled at Fermilab, which achieved unprecedented cavity quality factors of 3.0e10 at a nominal cryomodule voltage. We overview cavity performance, procedures to achieve ambient magnetic field < 5 mG at the cavity wall, and the successful demonstration of high mass flow cooldown in a cryomodule. The cavity performance under various cool down conditions are presented as well to show the impact of flux expulsion on Q0.

physics.acc-ph↗
arXiv2018

Procedure of simulations for Evaluations of Transient Parameters Stability for RF Cavities Due to Effects of Pulsed RF Heating

The Pulsed RF Heating (PRFH) is the well known effect in the development of high gradient accelerating cavities. There is a lot of research dedicated to the tolerable strength of electromagnetic field and the corresponding temperature rise leading to the surface degradation and cavity performance violation. To provide high quality of electron bunches, RF gun cavities operate in electron sources with high electric, and hence, magnetic RF fields. Being at the safe side with respect to cavity surface degradation, related to the PRFH result for S band in essentially transient thermal deformations, leading to the cavity frequency shift and quality factor change even within a few microseconds in the RF pulse. Thermo-elastic deformations consist of slow heat propagation from the cavity surface and fast elastic wave propagation from the very thin heated surface layer inside the cavity body with different in five orders typical velocities. For simulations of PRFH effects for more or less practical cavity design we can get results only in direct numerical simulations with certified software like ANSYS. The critical issue for such direct simulations is to combine in a single model the possibility of correct description for such qualitatively different process and to prove the reasonable precision of simulations. This report describes the procedure for simulation of PRFH related transient thermo-elastic deformations in S band cavities. The results of test simulations are presented to show the relative precision of simulations.

physics.acc-ph↗
arXiv2018

3 T Superferric Dipole for JLEIC - CDR

The full conceptual design report is presented for the 3 T superferric dipole for the proposed electron-ion collider JLEIC. It features a novel superconducting cable-in-conduit (CIC) winding that provides stress management, excellent field homegeneity, and volumetric cryogen flow to support rapid cycling and beam losses.

physics.acc-ph↗
arXiv2018

Observations of Coherent Optical Transition Radiation Interference Fringes Generated by Laser Plasma Accelerator Electron Beamlets

We report initial observations of coherent optical transition radiation interferometry (COTRI) patterns generated by microbunched electrons from laser-driven plasma accelerators (LPAs). These are revealed in the angular distribution patterns obtained by a CCD camera with the optics focused at infinity, or the far-field, viewing a Wartski two-foil interferometer. The beam divergences deduced by comparison to results from an analytical model are sub-mrad, and they are smaller than the ensemble vertical beam divergences measured at the downstream screen of the electron spectrometer. The transverse sizes of the beamlet images were obtained with focus at the object, or near field, and were in the few-micron regime as reported by LaBerge et al. The enhancements in intensity are significant relative to incoherent optical transition radiation (OTR) enabling multiple cameras to view each shot. We present two-foil interferometry effects coherently enhanced in both the 100-TW LPA at 215 MeV energy at Helmholtz-Zentrum Dresden-Rossendorf and the PW LPA at 1.0-GeV energy at the University of Texas-Austin. A transverse emittance estimate is reported for a microbunched beamlet example generated within the plasma bubble.

physics.acc-ph↗
arXiv2018

A Cost-Effective Rapid-Cycling Synchrotron

The present Fermilab proton Booster is an early example of a rapidly-cycling synchrotron (RCS). Built in the 1960s, it features a design in which the combined-function dipole magnets serve as vacuum chambers. Such a design is quite cost-effective, and it does not have the limitations associated with the eddy currents in a metallic vacuum chamber. However, an important drawback of that design is a high impedance, as seen by a beam, because of the magnet laminations. More recent RCS designs (e.g. J-PARC) employ large and complex ceramic vacuum chambers in order to mitigate the eddy current effects and to shield the beam from the magnet laminations. Such a design, albeit very successful, is quite costly because it requires large-bore magnets and large-bore RF cavities. In this article, we will consider an RCS concept with a thin-wall metallic vacuum chamber as a compromise between the chamber-less Fermilab Booster design and the large-bore design with ceramic chambers.

physics.acc-ph↗
arXiv2018

Particle physics applications of the AWAKE acceleration scheme

The AWAKE experiment had a very successful Run 1 (2016-8), demonstrating proton-driven plasma wakefield acceleration for the first time, through the observation of the modulation of a long proton bunch into micro-bunches and the acceleration of electrons up to 2 GeV in 10 m of plasma. The aims of AWAKE Run 2 (2021-4) are to have high-charge bunches of electrons accelerated to high energy, about 10 GeV, maintaining beam quality through the plasma and showing that the process is scalable. The AWAKE scheme is therefore a promising method to accelerate electrons to high energy over short distances and so develop a useable technology for particle physics experiments. Using proton bunches from the SPS, the acceleration of electron bunches up to about 50 GeV should be possible. Using the LHC proton bunches to drive wakefields could lead to multi-TeV electron bunches, e.g. with 3 TeV acceleration achieved in 4 km of plasma. This document outlines some of the applications of the AWAKE scheme to particle physics and shows that the AWAKE technology could lead to unique facilities and experiments that would otherwise not be possible. In particular, experiments are proposed to search for dark photons, measure strong field QED and investigate new physics in electron-proton collisions. The community is also invited to consider applications for electron beams up to the TeV scale.

physics.acc-ph↗
arXiv2019

Touschek with AdA in Orsay and the first direct observation of electron-positron collisions

We describe how the first direct observation of electron-positron collisions took place in 1963-1964 at the Laboratoire de l'Accélérateur Linéaire d'Orsay, in France, with the storage ring AdA, which had been proposed and constructed in the Italian National Laboratories of Frascati in 1960, under the guidance of Bruno Touschek. The obstacles and successes of the two and a half years during which the feasibility of electron-positron colliders was proved will be illustrated using archival and forgotten documents, in addition to transcripts from interviews with Carlo Bernardini, Peppino Di Giugno, Mario Fascetti, Francois Lacoste, and Jacques Haïssinski.

physics.hist-ph↗
arXiv2019

Energy frontier lepton-hadron colliders, vector-like quarks and leptons, preons and so on

First of all, an importance of the LHC and FCC based energy frontier lepton-hadron and photon-hadron colliders is emphasised. Then arguments favoring existence of new heavy isosinglet down-type quarks and vector-like isosinglet or isodoublet leptons are presented, following by historical arguments favoring new (preonic) level of matter. The importance of Super-Charm factory and GeV energy proton linac for Turkey national road map is argued. Finally, several recommendations for ESPP2020 are suggested.

hep-ph↗
arXiv2019

Study of electrostatic septum design and its high-voltage discharge protection

In this paper, we introduce the design of electrostatic septum (ESS) for the accelerator of Shanghai Advanced Proton Therapy (SAPT), and discuss its mechanical structure and the material selection of the electrode. The beam loss on the septum is studied, and the calculation results are given by the particle simulation and by the formula which is related to the placement angle and the divergence angle in the horizontal direction. Considering the thermal effect of the beam loss on the head of the septum, the equilibrium temperature at work is calculated. In addition, the distribution of the electric field and the trajectory of the particles are also simulated. The phenomenon of vacuum discharge in the working ESS is analyzed in detail on the relationship between the working current and the enhancement factor of the electric field on the electrode surface. Based on the discharge mechanism, the importance of degassing and cleaning of ESS is analyzed. We also analyzed the effect of external series resistance from circuit and discharge mechanism. It is considered that series resistance within a certain range can increase the breakdown voltage between vacuum electrodes and reduce the irreversible damage to the surface of the electrode system caused by the discharge process. The formula for the value of the resistance is given.

physics.acc-ph↗
arXiv2019

A New Approach for Measuring the Muon Anomalous Magnetic Moment and Electric Dipole Moment

This paper introduces a new approach to measure the muon magnetic moment anomaly $a_μ = (g-2)/2$, and the muon electric dipole moment (EDM) $d_μ$ at the J-PARC muon facility. The goal of our experiment is to measure $a_μ$ and $d_μ$ using an independent method with a factor of 10 lower muon momentum, and a factor of 20 smaller diameter storage-ring solenoid compared with previous and ongoing muon $g-2$ experiments with unprecedented quality of the storage magnetic field. Additional significant differences from the present experimental method include a factor of 1,000 smaller transverse emittance of the muon beam (reaccelerated thermal muon beam), its efficient vertical injection into the solenoid, and tracking each decay positron from muon decay to obtain its momentum vector. The precision goal for $a_μ$ is statistical uncertainty of 450 part per billion (ppb), similar to the present experimental uncertainty, and a systematic uncertainty less than 70 ppb. The goal for EDM is a sensitivity of $1.5\times 10^{-21}~e\cdot\mbox{cm}$.

physics.ins-det↗