arXiv Science⌕ Search

SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
arXiv2018

Optical Stochastic Cooling Experiment At The Fermilab IOTA Ring

Beam cooling enables an increase of peak and average luminosities and significantly expands the discovery potential of colliders; therefore, it is an indispensable component of any modern design. Optical Stochastic Cooling (OSC) is a high-bandwidth, beam-cooling technique that will advance the present state-of-the-art, stochastic cooling rate by more than three orders of magnitude. It is an enabling technology for next-generation, discovery-science machines at the energy and intensity frontiers including hadron and electron-ion colliders. This paper presents the status of our experimental effort to demonstrate OSC at the Integrable Optics Test Accelerator (IOTA) ring, a testbed for advanced beam-physics concepts and technologies that is currently being commissioned at Fermilab. Our recent efforts are centered on the development of an integrated design that is prepared for final engineering and fabrication. The paper also presents a comparison of theoretical calculations and numerical simulations of the pickup-undulator radiation and its interaction with electrons in the kicker-undulator.

physics.acc-ph↗
arXiv2018

Simultaneous Switching of Multiple GaN Transistors in a High-Speed Switch

A broadband travelling wave kicker operating with 80 MHz repetition rates is required for the new PIP-II accelerator at Fermilab. We present a technique to drive simultaneously four series-connected enhancement mode GaN-on-silicon power transistors by means of microwave photonics techniques. These four transistors are arranged into a high voltage and high repetition rate switch. Using multiple transistors in series is required to share switching losses. Using a photonic signal distribution system is required to achieve precise synchronization between transistors. We demonstrate 600 V arbitrary pulse generation into a 200 Ohm load with 2 ns rise/fall time. The arbitrary pulse widths can be adjusted from 4 ns to essentially DC.

physics.acc-ph↗
arXiv2018

High Burst Rate Charging System for the Lithium Lens Power Supply

Two pulsed power systems have been upgraded for the g-2 experiment at Fermilab. The Pbar Lithium Lens supply previously ran with a half sine pulsed current of 75 kA peak, 400 us duration and a repetition rate of 0.45 pps. For the g-2 experiment, the peak current was reduced to 25 kA, but the repetition rate was increased to an average of 12 pps. Furthermore, the pulses come in a burst of 8 with 10 ms between each of 8 pulses and then a delay until the next burst. The charging rate has gone up by a factor of 20 due to the burst speed. A major challenge for the upgrade was to charge the capacitor bank while keeping the power line loading and charging supply cost to a reasonable level. This paper will discuss how those issues were solved and results from the operational system.

physics.acc-ph↗
arXiv2018

Experimental Study of Beam Dynamics In The PIP-II MEBT Prototype

The Proton Improvement Plan, Stage Two (PIP-II) is a program of upgrades proposed for the Fermilab injection complex, which central part is an 800 MeV, 2 mA CW SRF linac. A prototype of the PIP-II linac front end called PIP-II Injector Test (PIP2IT) is being built at Fermilab. As of now, a 15 mA DC, 30-keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV CW RFQ, followed by a 10 m Medium Energy Beam Transport (MEBT) have been assembled and commissioned. The MEBT bunch-by-bunch chopping system and the requirement of a low uncontrolled beam loss put stringent limitations on the beam envelope and its variation. Measurements of transverse and longitudinal beam dynamics in the MEBT were performed in the range of 1-10 mA of the RFQ beam current. Almost all measurements are made with 10 μs beam pulses in order to avoid damage to the beam line. This report presents measurements of the transverse optics with differential trajectories, reconstruction of the beam envelope with scrapers and an Allison emittance scanner, as well as bunch length measurements with a Fast Faraday Cup.

physics.acc-ph↗
arXiv2018

Core-Halo Collective Instabilities

At strong space charge, transverse modes of the bunch core may effectively couple with those of the halo, leading to instabilities well below the core-only transverse mode-coupling threshold.

physics.acc-ph↗
arXiv2018

The FNAL Booster 2nd Harmonic RF Cavity

A second harmonic RF cavity which uses perpendicularly biased garnet for frequency tuning is currently being constructed for use in the Fermilab Booster. The cavity will operate at twice the fundamental RF frequency, from ~76 - 106 MHz, and will be turned on only during injection, and transition or extraction. Its main purpose is to reduce beam loss as required by Fermilab's Proton Improvement Plan (PIP). After three years of optimization and study, the cavity design has been finalized and all constituent parts have been received. We discuss the design aspects of the cavity and its associated systems, component testing, and status of the cavity construction.

physics.acc-ph↗
arXiv2018

Design of a nonlinear quasi-integrable lattice for resonance suppression at the University of Maryland Electron Ring

Conventional particle accelerators use linear focusing forces for transverse confinement. As a consequence of linearity, accelerating rings are sensitive to myriad resonances and instabilities. At high beam intensity, uncontrolled resonance-driven losses can deteriorate beam quality and cause damage or radio-activation in beam line components and surrounding areas. This is currently a major limitation of achievable current densities in state-of-the-art accelerators. Incorporating nonlinear focusing forces into machine design should provide immunity to resonances through nonlinear detuning of particle orbits from driving terms. A theory of nonlinear integrable beam optics is currently being investigated for use in accelerator rings. Such a system has potential to overcome the limits on achievable beam intensity. This dissertation presents a plan for implementing a proof-of-principle quasi-integrable octupole lattice at the University of Maryland Electron Ring (UMER). UMER is an accelerator platform that supports the study of high-intensity beam dynamics. In this dissertation, two designs are presented that differ in both complexity and strength of predicted effects. A configuration with a single, relatively long octupole magnet is expected to be more stabilizing than an arrangement of many short, distributed octupoles. Preparation for this experiment required the development and characterization of a low-intensity regime previously not operated at UMER. Additionally, required tolerances for the control of first and second order beam moments in the proposed experiments have been determined on the basis of simulated beam dynamics. In order to achieve these tolerances, a new method for improved orbit correction is developed. Finally, a study of resonance-driven losses in the linear UMER lattice is discussed.

physics.acc-ph↗
arXiv2018

CEPC Conceptual Design Report: Volume 1 - Accelerator

The Circular Electron Positron Collider (CEPC) is a large international scientific project initiated and hosted by China. It is located in a 100-km circumference underground tunnel. The accelerator complex consists of a linear accelerator (Linac), a damping ring (DR), the Booster, the Collider and several transport lines. In the tunnel, space is reserved for a future pp collider, SPPC. The CEPC center-of-mass energy is 240 GeV, and at that collision energy will serve as a Higgs factory. The design also allows operation at 91 GeV for a Z factory and at 160 GeV for a W factory. The heart of the CEPC is a double-ring collider. It has two interaction points where are located large detectors. The Booster is in the same tunnel above the Collider. It is a synchrotron with a 10 GeV injection energy and extraction energy equal to the beam collision energy. The repetition cycle is 10 seconds. Top-up injection will be used to maintain constant luminosity. The 10 GeV Linac, injector to the Booster, built at ground level, accelerates both electrons and positrons. A 1.1 GeV damping ring reduces the positron emittance. Transport lines made of permanent magnets connect the Linac to the Booster. In addition to particle physics, the Collider can operate simultaneously as a powerful synchrotron radiation (SR) light source. It will extend the usable SR spectrum into an unprecedented energy and brightness range. Two gamma-ray beamlines are included in the design. Prior to the construction will be a five-year R&D period (2018-2022). Construction is expected to start in ~2022 and be completed in ~2030. This report is a summary of work accomplished during the past several years by hundreds of scientists and engineers at home and abroad. The current volume, Volume I, is on the accelerators. A separate volume, Volume II, will be on physics and the detectors.

physics.acc-ph↗
arXiv2018

In-situ measurements of the intrinsic emittance of photocathodes for high brightness electron beams

The beam parameters of complete prototype of the bERLinPro injector that consisted of a lead cathode in an 1.6 cell superconducting cavity were measured. The measurements are discussed in chapter 2 and indicate that the beam emittance is governed by a multitude of contributions from the cathode and the injector. Cathodes for practical use must have a high enough QE to deliver the required current at moderate illumination intensities and be able to sustain the operation for several days. Alkali antimonides are good candidates for this purpose, as discussed in chapter 3.2. The preparation of such cathodes with QEs of a few percent in the visible range has been performed routinely but the details of the growth and the influence of process parameters on the cathodes properties are not well understood yet. A theoretical treatment of photoemission is presented, and expressions for quantum effciency and initial emittance of photocathodes are reviewed in section 3.1. In order to study Potassium Caesium Antimonide (K2CsSb) cathodes and their fabrication a preparation and characterization system has been developed at HZB. In section 3.2 this experimental setup is explained, details of the alkali antimonide cathodes are discussed, and the preparation of a caesium antimonide cathode is presented. Finally, chapter 4 focuses on the physics and engineering design of spectrometer that will resolve the initial transverse momentum of the photoelectrons released from cathode samples, the momentatron. It is installed in the analysis chamber of the cathode preparation system and allows in-situ characterization of the samples.

physics.acc-ph↗
arXiv2018

Analysis of Nonlinear Dynamics by Square Matrix Method

The nonlinear dynamics of a system with periodic structure can be analyzed using a square matrix. We show that because the special property of the square matrix constructed for nonlinear dynamics, we can reduce the dimension of the matrix from the original large number for high order calculation to low dimension in the first step of the analysis. Then a stable Jordan decomposition is obtained with much lower dimension. The Jordan decomposition leads to a transformation to a new variable, which is an accurate action-angle variable, in good agreement with trajectories and tune obtained from tracking. And more importantly, the deviation from constancy of the new action-angle variable provides a measure of the stability of the phase space trajectories and tune fluctuation. Thus the square matrix theory shows a good potential in theoretical understanding of a complicated dynamical system to guide the optimization of dynamical apertures. The method is illustrated by many examples of comparison between theory and numerical simulation. In particular, we show that the square matrix method can be used for fast optimization to reduce the nonlinearity of a system.

physics.class-ph↗
arXiv2018

A Study on a New Method of Dynamic Aperture Enlargement

This report summarizes progress made towards a new approach for enlarging the dynamic aperture of particle accelerators. Unlike prior methods which attempted to move the location of select resonances outward in phase space, our approach aims to move all resonances concurrently. These resonances are in one-to-one correspondence with fixed points of symplectic maps, which in turn are in a one-to-one correspondence with the critical points of their generating function. Thus in this approach, the problem of enlarging dynamic aperture boils down to an approximation problem: given a generating function, approximate it by a function whose critical points are outside a specified elliptical region. In attempting to solve the generating function approximation problem, we employed stable polynomials. Many stable polynomials have a determinantal representation that indicates stability. However, it is an open question as to whether such a determinantal representation can be found for a given stable polynomial. In seeking to answer this, we made progress towards constructing a symmetric determinantal representations of multivariable polynomials with the smallest sized linear pencil. This report also contains brief surveys of topics including Clifford numbers, stable polynomials, and symmetric determinantal representations of polynomials. We also explored using Gröbner bases to find where the gradient of a multivariable polynomial is zero.

physics.acc-ph↗
arXiv2018

Phase space exchange-based bunch compression with reduced CSR effects

Through an interaction of theory and optimization-guided design, we have developed a novel bunch compression scheme based on an asymmetric double emittance exchange (DEEX) with greatly reduced coherent synchrotron radiation (CSR) effects. First, we discuss the benefits of the phase space exchange-based bunch compressor (BC) in comparison to the chicane-based counterpart in the approximation of linear single particle dynamics and with respect to microbunching instabilities driven by longitudinal space charge forces. We present simulation results for nonlinear dynamics in a symmetric DEEX BC which accounts for the CSR effects of the scheme with direct and mirrored longitudinal phase space at the exit of the beamline. The later scheme demonstrates self-compensation of CSR effects on the longitudinal dynamics. Next, we optimize the parameters of the beam elements with an adaptive feedback, resulting in an asymmetric configuration of the scheme with compensated CSR and nonlinear effects on the transverse dynamics, which we further improve by incorporating several sextupoles relying on an eigen-emittance analysis. Finally, we discuss how this method can be generalized for optimizing nonlinear beam dynamics with collective effects.

physics.acc-ph↗
arXiv2018

Can electron beams be really focused by bent crystals?

The short period atomic plane modulation is suggested to be applied to modify the electron channeling potential in order to make it possible to considerably increase electron channeling efficiency by the crystal structure brake ensured by either a plane crystal cut or amorphous layer beneath the crystal entrance surface. The achieved channeling efficiency of 60-70 \% can considerably facilitate the process of high energy electron beam focusing by specially cut bent crystals. Possible parameters of one TeV electron beam focusing region are estimated using simulations

physics.acc-ph↗
arXiv2018

Transverse Instabilities of a Bunch with Space Charge, Wake and Feedback

When a resistive feedback and single-bunch wake act together, it is known that some head-tail modes may become unstable even without space charge. This feedback-wake instability, FWI, modified by space charge to a certain degree, is shown to have a special single-maximum increasing- dropping pattern with respect to the gain. Also, at sufficiently large Coulomb and wake fields, as well as the feedback gain, a new type of transverse mode-coupling instability is shown to take place, 3FMCI, when head-to-tail amplified positive modes couple and the growth rate saturates with the gain.

physics.acc-ph↗
arXiv2018

Multi-beam RF accelerators for ion implantation

We report on the development of a radio frequency (RF) linear accelerator (linac) for multiple-ion beams that is made from stacks of low cost wafers. The accelerator lattice is comprised of RF-acceleration gaps and electrostatic quadrupole focusing elements that are fabricated on 10-cm wafers made from printed circuit board or silicon. We demonstrate ion acceleration with an effective gradient of about 0.5 MV per meter with an array of 3 by 3 beams. The total ion beam energies achieved to date are in the 10 keV range with total ion currents in tests with noble gases of ~0.1mA. We discuss scaling of the ion energy (by adding acceleration modules) and ion currents (with more beams) for applications of this multi-beam RF linac technology to ion implantation and surface modification of materials.

physics.acc-ph↗
arXiv2018

Precision beam energy measurement by undulator radiation at MAMI

A novel interferometric method for absolute beam energy measurement is under development at MAMI. At the moment, the method is tested and optimized at an energy of 195 MeV. Despite the very small statistical uncertainty of the method, systematic effects have limited the overall accuracy. Recently, a measurement has been performed dedicated to the evaluation of these effects. This report comprises a description of the method and results of the recent data taking period.

physics.ins-det↗