SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources

arXiv2018

Secondary ion mass spectrometry for SRF cavity materials

Historically, many advances in superconducting radio frequency (SRF) cavities destined for use in advanced particle accelerators have come empirically, through the iterative procedure of modifying processing and then performance testing. However, material structure is directly responsible for performance. Understanding, the link between processing, structure, and performance will streamline and accelerate the research process. In order to connect processing, structure, and performance, accurate and robust materials characterization methods are needed. Here one such method, SIMS, is discussed with focus on analysis of SRF materials. In addition, several examples are presented, showing how SIMS is being used to further understanding of materials based SRF technologies.

physics.acc-ph↗

arXiv2018

8th Low-Level RF Workshop (LLRF2017)

This volume contains a subset of contributions presented at LLRF2017: the 8th Low-Level RF Workshop held in Barcelona, Spain, on October 16-19, 2017.

physics.acc-ph↗

arXiv2019

Resonant and random excitations on the proton beam in the Large Hadron Collider for active halo control with pulsed hollow electron lenses

We present the results of numerical simulations and experimental studies about the effects of resonant and random excitations on proton losses, emittances, and beam distributions in the Large Hadron Collider (LHC). In addition to shedding light on complex nonlinear effects, these studies are applied to the design of hollow electron lenses (HEL) for active beam halo control. In the High-Luminosity Large Hadron Collider (HL-LHC), a considerable amount of energy will be stored in the beam tails. To control and clean the beam halo, the installation of two hollow electron lenses, one per beam, is being considered. In standard electron-lens operation, a proton bunch sees the same electron current at every revolution. Pulsed electron beam operation (i.e., different currents for different turns) is also considered, because it can widen the range of achievable halo removal rates. For an axially symmetric electron beam, only protons in the halo are excited. If a residual field is present at the location of the beam core, these particles are exposed to time-dependent transverse kicks and to noise. We discuss the numerical simulations and the experiments conducted in 2016 and 2017 at injection energy in the LHC. The excitation patterns were generated by the transverse feedback and damping system, which acted as a flexible source of dipole kicks. Proton beam losses, emittances, and transverse distributions were recorded as a function of excitation patterns and strengths. The resonant excitations induced rich dynamical effects and nontrivial changes of the beam distributions, which, to our knowledge, have not previously been observed and studied in this detail. We conclude with a discussion of the tolerable and achievable residual fields and proposals for further studies.

physics.acc-ph↗

arXiv2018

Frequency Jump at Low Energies

One or more radio-frequency jumps are usually necessary for realizing a >= 100 AMeV/u proton or ion driver linac. Typically, such jumps happen in the range of \b{eta} = 0.2-0.6 between the resonator structures fitting to this \b{eta}-range, e.g. DTL, HWR, CCL or elliptical cavities. We propose to perform the first frequency jump already at low energies (\b{eta} <= 0.1) between two RFQ accelerators, which can bring some unique advantages. First studies have been performed and the results proved that this idea is feasible and promising. Many efforts have been and are being made to address the most critical issue for the jumps i.e. the beam matching at the transition.

physics.acc-ph↗

arXiv2018

Adaptive Matching Of The IOTA Ring Linear Optics For Space Charge Compensation

Many present and future accelerators must operate with high intensity beams when distortions induced by space charge forces are among major limiting factors. Betatron tune depression of above approximately 0.1 per cell leads to significant distortions of linear optics. Many aspects of machine operation depend on proper relations between lattice functions and phase advances, and can be improved with proper treatment of space charge effects. We implement an adaptive algorithm for linear lattice re matching with full account of space charge in the linear approximation for the case of Fermilab's IOTA ring. The method is based on a search for initial second moments that give closed solution and, at the same time, satisfy predefined set of goals for emittances, beta functions, dispersions and phase advances at and between points of interest. Iterative singular value decomposition based technique is used to search for optimum by varying wide array of model parameters.

physics.acc-ph↗

arXiv2019

Versatile $e^{+}e^{-}/γγ/ep$ facilities at a Future Circular Collider

This note describes two versatile accelerator complexes that could be built at a Future Circular Collider (FCC) in order to produce $e^{+}e^{-}$, $γγ$ and $ep$ collisions. The first facility is an SLC-type machine comprising a superconducting L-band linear accelerator (linac) and two arcs of bending magnets inside the FCC tunnel. Accelerated by the linac, electron and positron beams would traverse the arcs in opposite directions and collide at centre-of-mass energies considerably exceeding those attainable at circular $e^{+}e^{-}$ colliders. The proposed SLC-type facility would have the same luminosity as a conventional two-linac $e^{+}e^{-}$ collider. The L-band linac may form a part of the injector chain for a 100-TeV proton collider inside the FCC tunnel (FCC-pp), and could deliver electron or positron beams for an $ep$ collider (FCC-ep). The second facility is an ILC-based $e^{+}e^{-}$ collider placed tangentially to the circular FCC tunnel. If the collider is positioned asymmetrically with respect to the FCC tunnel, electron (or positron) bunches could be accelerated by both linacs before they are brought into collision with the 50-TeV beams from the FCC-pp proton storage ring. The two linacs may also form a part of the injector chain for FCC-pp. Each facility could be converted into a $γγ$ collider or a source of multi-MW beams for fixed-target experiments.

physics.acc-ph↗

arXiv2019

Optimizing Laser Wakefield Acceleration in the Nonlinear Self-Guided Regime for Fixed Laser Energy

The scaling laws for laser wakefield acceleration in the nonlinear, self-guided regime [Lu et al. Phys. Rev. Spec. Top. Accel. Beams 10, 061301 (2007)] are examined in detail using the quasi-3D version of the particle-in-cell code OSIRIS. We find that the scaling laws continue to work well as the plasma density is reduced while the normalized laser amplitude is kept fixed. For fixed laser energy, the energy gain of an isolated bunch of electrons can be improved with some loss in the bunch charge by shortening the normalized pulse length until self-guiding no longer occurs, and through the use of asymmetric longitudinal profiles with rapid rise times. For example, without any external guiding a 15 J,.8μm laser with a pulse length of 46 fs (39 fs) is found to generate a quasi-mono-energetic bunch of 355pC (227pC) with a max energy of 3.25 (4.04) GeV with an acceleration distance of 2.43 cm (3.08cm). Furthermore, a bunch with 39.4pC and a maximum energy 4.6 GeV is produced for an asymmetric laser with a rapid rise time. Studies for 30 J and 100 J lasers are also presented.

physics.plasm-ph↗

arXiv2018

Initial Growth Of Tin On Niobium For Vapor Diffusion Coating Of Nb3sn

Nb3Sn has the potential to achieve superior performance in terms of quality factor, accelerating gradient and operating temperature (4.2 K vs 2 K) resulting in significant reduction in both capital and operating costs compared to traditional niobium SRF accelerator cavities. Tin vapor diffusion coating of Nb3Sn on niobium appears to be a simple, yet most efficient technique so far to fabricate such cavities. Here, cavity interior surface coatings are obtained by a two step process: nucleation followed by deposition. The first step is normally accomplished with Sn/SnCl2 at a constant low temperature (500 °C) for several hours. To elucidate the role of this step, we systematically studied the niobium surface nucleated under varying process conditions. The surfaces obtained in typical tin/tin chloride processes were characterized using SEM/EDS, AFM, XPS, SAM and TEM. Examination of the surfaces nucleated under the standard conditions revealed not only tin particles, but also tin film on the surfaces resembling the surface obtained by Stranski-Krastanov growth mode. All the nucleation attempted with SnCl2 yielded better uniformity of Nb3Sn coating compared to coating obtained without nucleation, which often included random patchy regions with irregular grain structure. Even though the variation of nucleation parameters was able to produce different surfaces following nucleation, no evidence was found for any significant impact on the final coating.

physics.acc-ph↗

arXiv2018

Novel MCP-Based Electron Source Studies

Microchannel plates (MCPs) were recently proposed as novel type of cathodes for electron guns, suitable for applications in design of electron lenses. We report results of the first systematic study of microchannel plate based photomultiplier time response and maximum current density tests using different sources of light pulses. The Burle 85011-501 MCP-PMT is found to have good time response properties being capable of producing nanosecond long pulses with modest maximum current density and performance strongly dependent on magnetic field strength.

physics.acc-ph↗

arXiv2018

Experimental Simulation of Dust Impacts at Starflight Velocities

The problem of simulating the interaction of spacecraft travelling at velocities necessary for starflight with the interplanetary and interstellar medium is considered. Interaction of protons, atoms, and ions at kinetic energies relative to the spacecraft (MeV per nucleon) is essentially a problem of sputtering. More problematic is the impact of dust grains, macroscopic objects on the order of 10 nm ($10^{-21}$ kg) to 1 $μ$m ($10^{-15}$ kg), the effects of which are difficult to calculate, and thus experiments are needed. The maximum velocity of dust grains that can be achieved at present in the laboratory using electrostatic methods is approximately 100 km/s, two orders of magnitude below starflight velocities. The attainment of greater velocities has been previously considered in connection with the concept of impact fusion and was concluded to be technologically very challenging. The reasons for this are explained in terms of field emission, which limits the charge-to-mass ratio on the macroscopic particle being accelerated as well as the voltage potential gradient of the accelerating electrostatic field, resulting in the accelerator needing to be hundreds to thousands of kilometers long for $μ$m-sized grains. Use of circular accelerators (cyclotrons and synchrotrons) is not practical due to limitations on magnetic field strength making the accelerator thousands of kilometers in size for $μ$m-sized grains. Electromagnetic launchers (railguns, coilguns) have not been able to produce velocities greater than conventional gas guns (< 10 km/s). The nearest feasible technologies (tandem accelerators, macromolecular accelerators) to reach the regime of projectile mass and velocity of interest are reviewed. Pulsed lasers are found to be the only facilities able to accelerate condensed phase matter to velocities approaching 1000 km/s but unlikely to be able to reach greater speeds.

physics.space-ph↗

arXiv2018

TMCI with Resonator Wakes

Transverse mode-coupling instability (TMCI) with a high-frequency resonator wake is examined by the Nested Head-Tail Vlasov solver (NHT), where a Gaussian bunch in a parabolic potential (GP model) is represented by concentric rings in the longitudinal phase space. It is shown that multiple mode couplings and decouplings make impossible an unambiguous definition of the threshold, unless Landau damping is taken into account. To address this problem, instead of a single instability threshold, an interval of thresholds is suggested, bounded by the low and high intensity ones. For the broadband impedance model, the high intensity threshold is shown to follow Zotter's scaling, but smaller by about a factor of two. The same scaling, this time smaller than Zotter's by a factor of four, is found for the ABS model (Air Bag Square well).

physics.acc-ph↗

arXiv2018

Improved Magnetron Stability And Reduced Noise In Efficient Transmitters For Superconducting Accelerators

State of the art high-current superconducting accelerators require efficient RF sources with a fast dynamic phase and power control. This allows for compensation of the phase and amplitude deviations of the accelerating voltage in the Superconducting RF (SRF) cavities caused by microphonics, etc. Efficient magnetron transmitters with fast phase and power control are attractive RF sources for this application. They are more cost effective than traditional RF sources such as klystrons, IOTs and solid-state amplifiers used with large scale accelerator projects. However, unlike traditional RF sources, controlled magnetrons operate as forced oscillators. Study of the impact of the controlling signal on magnetron stability, noise and efficiency is therefore important. This paper discusses experiments with 2.45 GHz, 1 kW tubes and verifies our analytical model which is based on the charge drift approximation.

physics.acc-ph↗

arXiv2018

First Performance Results Of The PIP2IT MEBT 200 Ohm Kicker Prototype

The PIP-II project is a program to upgrade the Fermilab accelerator complex. The PIP-II linac includes a 2.1 MeV Medium Energy Beam Transport (MEBT) section that incorporates a unique chopping system to perform arbitrary, bunch-by-bunch removal of 162.5 MHz structured beam. The MEBT chopping system will consist of two identical kickers working together and a beam absorber. One design of two having been proposed has been a 200 Ohm characteristic impedance traveling wave dual-helix kicker driven with custom designed high-speed switches. This paper reports on the first performance results of one prototype kicker built, installed and tested with beam at the PIP-II Injector Test (PIP2IT) facility. The helix deflector design details are discussed. The electrical performance of the high-speed switch driver operating at 500 V bias is presented. Tests performed were chopping beam at 81.25 MHz for microseconds as well as with a truly arbitrary pattern for 550 $μ$s bursts having a 45 MHz average switching rate and repeating at 20 Hz.

physics.acc-ph↗

arXiv2018

Longitudinal Mode-by-Mode Feedback System for The J-PARC Main Ring

The J-PARC Main Ring (MR) is a high intensity proton synchrotron, which accelerates protons from 3 GeV to 30 GeV. The MR delivers $2.6\times10^{14}$ protons per pulse, which corresponds to the beam power of 500 kW, to the neutrino experiment as of May 2018, and the studies to reach higher beam intensities are in progress. During studies, we observed the longitudinal dipole coupled-bunch instabilities in the MR for the beam power beyond 470 kW. To mitigate them for higher beam intensities, we have developed a longitudinal mode-by-mode feedback system. The feedback system consists of a wall current monitor, a FPGA-based feedback processor, RF power amplifiers, and a RF cavity as a longitudinal kicker. In the feedback processor, we utilize the single sideband filtering technique to detect the oscillation components of the individual coupled-bunch mode in the beam signal. The frequency response of the filters in the feedback processor matched well with the simulation. The oscillation amplitude of the coupled bunch oscillation measured by the system agreed with the oscilloscope analysis.

physics.acc-ph↗

arXiv2018

Horizontal Emittance Reduction on a Synchrotron Radiation Light Source with a Robinson Wiggler

The performance of synchrotron light facilities are strongly influenced by the photon beam bright- ness, that can be further increased by reducing the beam emittance. A Robinson Wiggler can be installed in a non-zero dispersion straight section to reduce the horizontal beam emittance. It is composed of an array of magnets of alternated polarities, whose both magnetic field and gradient are of opposite signs. It provides a compact solution to reduce by 50% the horizontal emittance. How- ever, it increases the energy spread by 40%. The concept of the Robinson Wiggler (RW) is described here, the first experimental observation of the Robinson effect in a synchrotron light source on the transverse and longitudinal beam properties by the means of four existing undulators is presented and the impact on the photon flux density is studied.

physics.acc-ph↗

arXiv2018

Coherent Space-Charge to X-ray Up-Conversion in Gas

We theoretically investigate the use of the intense transverse field created by a relativistic electron bunch to drive strong-field processes. Such bunches can be easily implemented from beam shaping in existing electron accelerators. We focus on the process of strong-field driven high harmonic generation and calculate the single-atom dipole response to the space-charge field of relativistic tilted electron beam. We compare the emitted radiation spectrum of the space-charge field to that of a few-cycle laser pulse and show that the space-charge field creates a spectrum which extends much further into the X-ray domain. We apply simple classical trajectory analysis to understand this result.

physics.acc-ph↗

arXiv2018

Accelerating fields up to 49 MV/m in TESLA-shape superconducting RF niobium cavities via 75C vacuum bake

In this paper we present the discovery of a new surface treatment applied to superconducting radio frequency (SRF) niobium cavities, leading to unprecedented accelerating fields of 49 MV/m in TESLA-shaped cavities, in continuous wave (CW); the corresponding peak magnetic fields are the highest ever measured in CW, about 210 mT. For TESLA-shape cavities the maximum quench field ever achieved was ~45 MV/m - reached very rarely- with most typical values being below 40 MV/m. These values are reached for niobium surfaces treated with electropolishing followed by the so called mild bake, a 120C vacuum bake (for 48 hours for fine grain and 24 hours for large grain surfaces). We discover that the addition during the mild bake of a step at 75C for few hours, before the 120C, increases systematically the quench fields up to unprecedented values of 49 MV/m. The significance of the result lays not only in the relative improvement, but in the proof that niobium surfaces can sustain and exceed CW radio frequency magnetic fields much larger than Hc1, pointing to an extrinsic nature of the current field limitations, and therefore to the potential to reach accelerating fields well beyond the current state of the art.

physics.acc-ph↗

arXiv2019

Fundamental characteristics of transverse deflecting field

The Panofsky-Wenzel theorem connects the transverse deflecting force in an rf structure with the existence of a longitudinal electric field component. In this paper it is shown that a transverse deflecting force is always accompanied by an additional longitudinal magnetic field component which leads to an emittance growth in the direction perpendicular to the transverse force. Transverse deflecting waves can thus not be described by pure TM or TE modes, but require a linear combination of basis modes for their representation. The mode description is preferably performed in the HM--HE basis to avoid converge problems, which are fundamental for the TM--TE basis.

physics.acc-ph↗