SEARCH · arXiv Science

Results for “physics.acc-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

arXiv2014

Particle acceleration in sub-cycle optical cells

A single laser pulse with spot size smaller than half its wavelength ($w_0 < λ/2$) can provide a net energy gain to ultra-relativistic particles. In this paper, we discuss the properties of an optical cell consisting of $N$ sub-cycle pulses that propagate in the direction perpendicular to the electron motion. We show that the energy gain produced by the cell is proportional to $N$ and it is sizable even for $\mathcal{O}(1\mathrm{~TW})$ pulses.

physics.optics↗

arXiv2014

Laserwire at the Accelerator Test Facility 2 with Sub-Micrometre Resolution

A laserwire transverse electron beam size measurement system has been developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK. Special electron beam optics were developed to create an approximately 1 x 100 μm (vertical x horizontal) electron beam at the laserwire location, which was profiled using a 150 mJ, 71 ps laser pulse with a wavelength of 532 nm. The precise characterisation of the laser propagation allows the non-Gaussian transverse profiles of the electron beam caused by the laser divergence to be deconvolved. A minimum vertical electron beam size of 1.07 ${\pm}$ 0.06 (stat.) ${\pm}$ 0.05 (sys.) μm was measured. A vertically focussing quadrupole just before the laserwire was varied whilst making laserwire measurements and the projected vertical emittance was measured to be 82.56 ${\pm}$ 3.04 pm rad.

physics.acc-ph↗

arXiv2014

Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider

The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010--2013, the LHC was routinely storing protons at 3.5--4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordinary demands on the control of beam losses. An un-controlled loss of even a tiny fraction of the beam could cause a superconducting magnet to undergo a transition into a normal-conducting state, or in the worst case cause material damage. Hence a multi-stage collimation system has been installed in order to safely intercept high-amplitude beam protons before they are lost elsewhere. To guarantee adequate protection from the collimators, a detailed theoretical understanding is needed. This article presents results of numerical simulations of the distribution of beam losses around the LHC that have leaked out of the collimation system. The studies include tracking of protons through the fields of more than 5000 magnets in the 27 km LHC ring over hundreds of revolutions, and Monte-Carlo simulations of particle-matter interactions both in collimators and machine elements being hit by escaping particles. The simulation results agree typically within a factor 2 with measurements of beam loss distributions from the previous LHC run. Considering the complex simulation, which must account for a very large number of unknown imperfections, and in view of the total losses around the ring spanning over 7 orders of magnitude, we consider this an excellent agreement. Our results give confidence in the simulation tools, which are used also for the design of future accelerators.

physics.acc-ph↗

arXiv2014

MOMENT: a muon-decay medium-baseline neutrino beam facility

Neutrino beam with about 300 MeV in energy, high-flux and medium baseline is considered a rational choice for measuring CP violation before the more powerful Neutrino Factory will be built. Following this concept, a unique neutrino beam facility based on muon-decayed neutrinos is proposed. The facility adopts a continuous-wave proton linac of 1.5 GeV and 10 mA as the proton driver, which can deliver an extremely high beam power of 15 MW. Instead of pion-decayed neutrinos, unprecedentedly intense muon-decayed neutrinos are used for better background discrimination. The schematic design for the facility is presented here, including the proton driver, the assembly of a mercury-jet target and capture superconducting solenoids, a pion/muon beam transport line, a long muon decay channel of about 600 m and the detector concept. The physics prospects and the technical challenges are also discussed.

physics.acc-ph↗

arXiv2013

Coherent photon beam based diagnostics for a seeded extreme ultraviolet free-electron laser

Independently from electron beam based procedures, photon beam based diagnostics is an alternative way for alignment and commissioning of the numerous undulator cells in a high-gain short-wavelength free-electron laser (FEL). In this paper, using the seed laser modulated electron beam and the undulator fine tuning technique, a coherent photon beam based diagnostic was proposed for seeded FEL, and some preliminary experimental results at Shanghai deep ultraviolet FEL test facility were presented. It demonstrates that the spatial distribution of the coherent harmonic radiation from one individual or two consecutive undulator segments can be used to optimize the electron beam trajectory, to verify the undulator magnetic gap, and to adjust the phase match between two undulator segments.

physics.acc-ph↗

arXiv2012

Thermal Conductivity of Industrial Nb3Sn Wires Fabricated by Various Techniques

We have developed a new experimental setup specifically designed for measuring thermal conductivity on technical superconductors in the range of temperatures from 3 to 330 K in magnetic fields up to 21 T. Three Nb3Sn wires, produced by the powder in tube technique, the bronze route and the internal tin restacked rod process, respectively, have been investigated. We show that, due to the complexity of the architecture of these wires, direct measurement of thermal conductivity is required for a correct estimation of thermal stability in superconducting magnets.

cond-mat.supr-con↗

arXiv2014

Design, Construction and Test Arrangement of a Fast-Cycling HTS Accelerator Magnet

Design, fabrication and assembly of a novel fast-cycling accelerator magnet is presented. A short-sample magnet is powered with a single-turn HTS cable capable to carry 80 kA current at 20 K and generate 1.75 T field in a 40 mm magnet gap. The applied conventional leads and the power supply, however, allow only for a sin-wave 24 kA, 20 Hz current limiting test magnet to a B-field of 0.5 T and to a maximum cycling rate of 20 T/s. The critical aspects of the cable construction and the splicing connection to the power leads are described. Tentative power losses of the proposed HTS accelerator magnet in a possible application for proton and muon accelerators are presented.

physics.acc-ph↗

arXiv2017

Nb3Sn wire shape and cross sectional area inhomogeneity in Rutherford cables

During Rutherford cable production the wires are plastically deformed and their initially round shape is distorted. Using X-ray absorption tomography we have determined the 3D shape of an unreacted Nb3Sn 11 T dipole Rutherford cable, and of a reacted and impregnated Nb3Sn cable double stack. State-of-the-art image processing was applied to correct for tomographic artefacts caused by the large cable aspect ratio, for the segmentation of the individual wires and subelement bundles inside the wires, and for the calculation of the wire cross sectional area and shape variations. The 11 T dipole cable cross section oscillates by 2% with a frequency of 1.24 mm (1/80 of the transposition pitch length of the 40 wire cable). A comparatively stronger cross sectional area variation is observed in the individual wires at the thin edge of the keystoned cable where the wire aspect ratio is largest.

physics.acc-ph↗

arXiv2017

A Method for Greatly Reduced Edge Effects and Crosstalk in CCT Magnets

Iron-free CCT magnet design offers many advantages, one being the excellent field quality and the absence of multipole components. However, edge effects are present, although they tend to integrate out over the length of the magnet. Many modern accelerator applications, however, require that these magnets are placed in an area of rapidly varying optics parameters, so magnets with greatly reduced edge effects have an advantage. We have designed such a magnet (a quadrupole) by adding multipole components of the opposite sign to the edge distortions of the magnet. A possible application could be the final focus magnets of the FCC-ee, where beam sizes at the entry and exit point of the magnets vary by large factors. We have then used this technique to effectively eliminate cross talk between adjacent final focus quadrupoles for the incoming and outgoing beams.

physics.acc-ph↗

arXiv2017

Fractional Fowler-Nordheim Law for Field Emission from Rough Surface with Nonparabolic Energy Dispersion

The theories of field electron emission from perfectly planar and smooth canonical surfaces are well understood, but they are not suitable for describing emission from rough, irregular surfaces arising in modern nanoscale electron sources. Moreover, the existing models rely on Sommerfeld's free-electron theory for the description of electronic distribution which is not a valid assumption for modern materials with nonparabolic energy dispersion. In this paper, we derive analytically a generalized Fowler-Nordheim (FN) type equation that takes into account the reduced space-dimensionality seen by the quantum mechanically tunneling electron at a rough, irregular emission surface. We also consider the effects of non-parabolic energy dispersion on field-emission from narrow-gap semiconductors and few-layer graphene using Kane's band model. The traditional FN equation is shown to be a limiting case of our model in the limit of a perfectly flat surface of a material with parabolic dispersion. The fractional-dimension parameter used in this model can be experimentally calculated from appropriate current-voltage data plot. By applying this model to experimental data, the standard field-emission parameters can be deduced with better accuracy than by using the conventional FN equation.

physics.acc-ph↗

arXiv2021

Particle Tracking with Space Charge Effects using Graphics Processing Unit

Particle tracking simulations with space charge effects are very important for high-intensity proton rings. Since they include not only Hamilton mechanics of a single particle but constructing charge densities and solving Poisson equations to obtain the electromagnetic field due to the space charge, they are extremely time-consuming. We have newly developed a particle tracking simulation code that can be used in Graphics Processing Units (GPU). GPUs have strong capacities of parallel processing so that the calculation of single-particle mechanics can be done very fast by complete parallelization. Our new code also includes the space charge effect. It must construct charge densities, which cannot be completely parallelized. For the charge density construction, we can use shared memory which can be accessed very fast from each thread. The usage of shared memory is another advantage of GPU computing. As a result of our new development, we increase the speed of our particle tracking including space charge effect approximately 10 times faster than that in the case of our conventional code used in CPU.

physics.acc-ph↗

arXiv2014

Experimental evidence of planar channeling in a periodically bent crystal

The usage of a Crystalline Undulator (CU) has been identified as a promising solution for generating powerful and monochromatic $γ$-rays. A CU was fabricated at SSL through the grooving method, i.e., by the manufacturing of a series of periodical grooves on the major surfaces of a crystal. The CU was extensively characterized both morphologically via optical interferometry at SSL and structurally via X-ray diffraction at ESRF. Then, it was finally tested for channeling with a 400 GeV/c proton beam at CERN. The experimental results were compared to Monte Carlo simulations. Evidence of planar channeling in the CU was firmly observed. Finally, the emission spectrum of the positron beam interacting with the CU was simulated for possible usage in currently existing facilities.

physics.acc-ph↗

arXiv2014

Quasi-free photoproduction of pion-pairs off protons and neutrons

Beam-helicity asymmetries and mass-differential cross sections have been measured at the MAMI accelerator in Mainz for the photoproduction of neutral and mixed-charge pion pairs in the reactions $\boldsymbolγp\rightarrow nπ^0π^+$ and $\boldsymbolγp\rightarrow pπ^0π^0$ off free protons and $\boldsymbolγd \rightarrow (p)pπ^0π^-$, $\boldsymbolγd\rightarrow (n)pπ^0π^0$ and $\boldsymbolγd\rightarrow (n)nπ^0π^+$, $\boldsymbolγd\rightarrow (p)n π^0π^0$ off quasi-free nucleons bound in the deuteron for incident photon energies up to 1.4 GeV. Circularly polarized photons were produced in bremsstrahlung processes of longitudinally polarized electrons and tagged with the Glasgow-Mainz magnetic spectrometer. The decay products (photons, protons, neutrons, and charged pions) were detected in the $4π$ electromagnetic calorimeter composed of the Crystal Ball and TAPS detectors. Using a full kinematic reconstruction of the final state, excellent agreement was found between the results for free and quasi-free protons, indicating that the quasi-free neutron results are also a close approximation of the free-neutron results. Comparisons of the results to predictions from model calculations suggest that especially the reaction mechanisms in the production of the mixed-charge final states are still not well understood, in particular at low incident photon energies in the second nucleon resonance region.

physics.acc-ph↗

arXiv2013

Compact electron acceleration and bunch compression in THz waveguides

We numerically investigate the acceleration and bunch compression capabilities of 20 mJ, 0.6 THz-centered coherent terahertz pulses in optimized metallic dielectric-loaded cylindrical waveguides. In particular, we theoretically demonstrate the acceleration of 1.6 pC and 16 pC electron bunches from 1 MeV to 10 MeV over an interaction distance of 20mm, the compression of a 1.6 pC 1 MeV bunch from 100 fs to 2 fs (50 times compression) over an interaction distance of about 18mm, and the compression of a 1.6 pC 10 MeV bunch from 100 fs to 1.61 fs (62 times) over an interaction distance of 42 cm. The obtained results show the promise of coherent THz pulses in realizing compact electron acceleration and bunch compression schemes.

physics.acc-ph↗

arXiv2014

Compensating the electron beam energy spread by the natural transverse gradient of laser undulator in all-optical x-ray light sources

All-optical ideas provide a potential to dramatically cut off the size and cost of x-ray light sources to the university-laboratory scale, with the combination of the laser-plasma accelerator and the laser undulator. However, the large longitudinal energy spread of the electron beam from laser-plasma accelerator may hinder the way to high brightness of these all-optical light sources. In this paper, the beam energy spread effect is proposed to be significantly compensated by the natural transverse gradient of a laser undulator when properly transverse-dispersing the electron beam. Theoretical analysis and numerical simulations on conventional laser-Compton scattering sources and high-gain all-optical x-ray free-electron lasers with the electron beams from laser-plasma accelerators are presented.

physics.acc-ph↗

arXiv2011

Doppler effect in the oscillator radiation process in the medium

The purpose of this paper is to investigate the radiation process of the charged particle passing through an external periodic field in a dispersive medium. In the optical range of spectrum we will consider two cases: first, the source has not eigenfrequency, and second, the source has eigenfrequency. In the first case, when the Cherenkov radiation occurs, the non-zero eigenfrequency produces a paradox for Doppler effect. It is shown that the absence of the eigenfrequency solves the paradox known in the literature. The question whether the process is normal (i.e. hard photons are being radiated under the small angles) or anomalous depends on the law of the medium dispersion. When the source has an eigenfrequency the Doppler effects can be either normal or anomalous. In the X-ray range of the oscillator radiation spectrum we have two photons radiated under the same angle- soft and hard. In this case the radiation obeys to so-called complicated Doppler effect, i.e. in the soft photon region we have anomalous Doppler effect and in the hard photon region we have normal Doppler effect.

hep-ph↗

arXiv2013

Self-consistent plasma wake field interaction in quantum beam transport

A review of a recent theoretical investigation of the quantum transverse beam motion that has been developed in terms of a coupled system of nonlinear spinorial equations is carried out. This is done assuming that a relativistic electron/positron beam is traveling through a plasma along an external magnetic field in overdense condition. Three different nonliner regimes of this analysis are considered: the strictly local regime, where the beam spot size is much greater than the plasma wavelength (then, the spinorial system is reduced to a 2D cubic nonlinear Schrodinger equation in the form of Gross-Pitaevskii equation); the moderately nonlocal regime where the beam spot size is comparable to the plasma wavelength; and, finally, the strongly nonlocal regime where the beam spot size is much smaller than the plasma wavelength. In all the cases the existence of quantum beam vortices and ring solitons is demonstrated both analytically and numerically.

physics.acc-ph↗

arXiv2014

The Higgs boson and the International Linear Collider

The Higgs boson will be subject of intense experimental searches in future high-energy experiments. In addition to the effort made at the Large Hadron Collider, where it was discovered, it will be the major subject of study at the International Linear Collider. We review here the reasons for that and some of the issues to be tackled at this future accelerator, in particular that of the precision of the Higgs-boson couplings.

physics.pop-ph↗