arXiv Science⌕ Search

SEARCH · arXiv Science

Results for “physics.comp-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
arXiv2014

Organelle morphogenesis by active remodeling

Intracellular organelles are subject to a steady flux of lipids and proteins through active, energy consuming transport processes. Active fission and fusion are promoted by GTPases, e.g., Arf-Coatamer and the Rab-Snare complexes, which both sense and generate local membrane curvature. Here we investigate through Dynamical Triangulation Monte Carlo simulations, the role that these active processes play in determining the morphology and compositional segregation in closed membranes. Our results suggest that the ramified morphologies of organelles observed in-vivo are a consequence of driven nonequilibrium processes rather than equilibrium forces.

physics.bio-ph↗
arXiv2014

Nonlinear seed island generation by three-dimensional electromagnetic, gyrokinetic turbulence

Turbulence is shown to be critical to the onset and evolution of the neoclassical tearing mode, affecting both its growth and rotation. The interaction is here studied for the first time in the three dimensional, toroidal gyrokinetic framework. Turbulent fluctuations do not destroy the growing island early in its development, which maintains a coherent form as it grows, in fact the island is seeded and its rotation frequency determined, by nonlinear interaction. This process provides an initial structure that is of the order of an ion gyro-radius wide, allowing the island to rapidly reach a large size. A large degree of stochastisation around the seperatrix, and a complete breakdown of the X-point is seen, which significantly reduces the effective island width. A turbulent modification of the electrostatic field in and around the island greatly affects the size of the resonant layer width, and the island is seen to grow at the linear rate even though the island is significantly wider than the singular layer width.

physics.plasm-ph↗
arXiv2014

Density matrix minimization with $\ell_1$ regularization

We propose a convex variational principle to find sparse representation of low-lying eigenspace of symmetric matrices. In the context of electronic structure calculation, this corresponds to a sparse density matrix minimization algorithm with $\ell_1$ regularization. The minimization problem can be efficiently solved by a split Bergman iteration type algorithm. We further prove that from any initial condition, the algorithm converges to a minimizer of the variational principle.

math-ph↗
arXiv2014

A Concurrent Multiscale Micromorphic Molecular Dynamics. Part I. Theoretical Formulation

Based on a novel concept of multiplicative multiscale decomposition, we have derived a multiscale micromorphic molecular dynamics (MMMD)to extent the (Andersen)-Parrinello-Rahman molecular dynamics to mesoscale and macroscale. The multiscale micromorphic molecular dynamics is a con-current three-scale particle dynamics that couples a fine scale molecular dynamics, a mesoscale particle dynamics of micromorphic medium, and a coarse scale nonlocal particle dynamics of nonlinear continuum. By choosing proper statistical closure conditions, we have shown that the original Andersen-Parrinello-Rahman molecular dynamics can be rigorously formulated and justified from first principle, and it is a special case of the proposed multiscale micromorphic molecular dynamics. The discovered mutiscale structure and the corresponding multiscale dynamics reveal a seamless transition channel from atomistic scale to continuum scale and the intrinsic coupling relation among them, and it can be used to solve finite size nanoscale science and engineering problems with arbitrary boundary conditions.

physics.comp-ph↗
arXiv2014

Improved Diffuse Boundary Condition for the DSBGK Method to Eliminate the Unphysical Density Drift

An improved diffuse boundary condition, where the number flux of the incoming real molecules on the wall surface is calculated using the molecular variables rather than the cell's macroscopic variables, is proposed to eliminate the unphysical density drift, which was observed in the previous DSBGK simulation of the lid-driven problem but disappears in the channel flow problem because of the density constraint imposed at the open boundaries. Consequently, the efficient time-average process is valid for sampling all quantities of interest in closed as well as open problems. When the driven velocity of the lid-driven problem is only one micrometer per second that is realistic in the micro-electro-mechanical systems or pore-scale flows of the shale gas, we suggest to use the original boundary condition because the density drift during a very long time interval becomes unperceivable when the perturbation is tiny. Thus, the original diffuse boundary condition, which contains much less stochastic noise than the improved one, is still an advisable choice in closed problems with tiny perturbation and in open problems unless the density drift occurs and fails the goal of the simulations making the use of the improved boundary condition necessary.

physics.comp-ph↗
arXiv2014

The education of Walter Kohn and the creation of density functional theory

The theoretical solid-state physicist Walter Kohn was awarded one-half of the 1998 Nobel Prize in Chemistry for his mid-1960's creation of an approach to the many-particle problem in quantum mechanics called density functional theory (DFT). In its exact form, DFT establishes that the total charge density of any system of electrons and nuclei provides all the information needed for a complete description of that system. This was a breakthrough for the study of atoms, molecules, gases, liquids, and solids. Before DFT, it was thought that only the vastly more complicated many-electron wave function was needed for a complete description of such systems. Today, fifty years after its introduction, DFT (in one of its approximate forms) is the method of choice used by most scientists to calculate the physical properties of materials of all kinds. In this paper, I present a biographical essay of Kohn's educational experiences and professional career up to and including the creation of DFT.

physics.hist-ph↗
arXiv2014

Petascale computations for Large-scale Atomic and Molecular collisions

Petaflop architectures are currently being utilized efficiently to perform large scale computations in Atomic, Molecular and Optical Collisions. We solve the Schroedinger or Dirac equation for the appropriate collision problem using the R-matrix or R-matrix with pseudo-states approach. We briefly outline the parallel methodology used and implemented for the current suite of Breit-Pauli and DARC codes. Various examples are shown of our theoretical results compared with those obtained from Synchrotron Radiation facilities and from Satellite observations. We also indicate future directions and implementation of the R-matrix codes on emerging GPU architectures.

cs.DC↗
arXiv2014

Lefschetz thimble Monte Carlo for many body theories: application to the repulsive Hubbard model away from half filling

Recently, a new method, based on stochastic integration on the surfaces of steepest descent of the action, was introduced to tackle the sign problem in quantum field theories. We show how this method can be used in many body theories to perform fully non-perturbative calculations of quantum corrections about mean field solutions. We discuss an explicit algorithm for implementing our method, and present results for the repulsive Hubbard model away from half-filling at intermediate temperatures. Our results are consistent with those from the recent state of the art cluster dynamical mean field theory calculations.

cond-mat.str-el↗
arXiv2015

Universal iso-density polarizable continuum model for molecular solvents

Implicit electron-density solvation models based on joint density-functional theory offer a computationally efficient solution to the problem of calculating thermodynamic quantities of solvated systems from firstprinciples quantum mechanics. However, despite much recent interest in such models, to date the applicability of such models in the plane-wave context to non-aqueous solvents has been limited because the determination of the model parameters requires fitting to a large database of experimental solvation energies for each new solvent considered. This work presents an alternate approach which allows development of new iso-density models for a large class of protic and aprotic solvents from only simple, single-molecule ab initio calculations and readily available bulk thermodynamic data.

physics.chem-ph↗
arXiv2014

Estimation of conductivity changes in a region of interest with electrical impedance tomography

This paper proposes a novel approach to reconstruct changes in a target conductivity from electrical impedance tomography measurements. As in the conventional difference imaging, the reconstruction of the conductivity change is based on electrical potential measurements from the exterior boundary of the target before and after the change. In this paper, however, images of the conductivity before and after the change are reconstructed simultaneously based on the two data sets. The key feature of the approach is that the conductivity after the change is parameterized as a linear combination of the initial state and the change. This allows for modeling independently the spatial characteristics of the background conductivity and the change of the conductivity - by separate regularization functionals. The approach also allows in a straightforward way the restriction of the conductivity change to a localized region of interest inside the domain. While conventional difference imaging reconstruction is based on a global linearization of the observation model, the proposed approach amounts to solving a non-linear inverse problem. The feasibility of the proposed reconstruction method is tested experimentally and with a simulation which demonstrates a potential new medical application of electrical impedance tomography: imaging of vocal folds in voice loading studies.

physics.comp-ph↗
arXiv2014

Mathematical Modelling and Parameter Optimization of Pulsating Heat Pipes

Proper heat transfer management is important to key electronic components in microelectronic applications. Pulsating heat pipes (PHP) can be an efficient solution to such heat transfer problems. However, mathematical modelling of a PHP system is still very challenging, due to the complexity and multiphysics nature of the system. In this work, we present a simplified, two-phase heat transfer model, and our analysis shows that it can make good predictions about startup characteristics. Furthermore, by considering parameter estimation as a nonlinear constrained optimization problem, we have used the firefly algorithm to find parameter estimates efficiently. We have also demonstrated that it is possible to obtain good estimates of key parameters using very limited experimental data.

math.OC↗
arXiv2014

Discrete Boltzmann model of compressible flows with spherical or cylindrical symmetry

To study simultaneously the hydrodynamic and thermodynamic behaviors in compressible flow systems with spherical or cylindrical symmetry, we present a theoretical framework for constructing Discrete Boltzmann Model(DBM) with spherical or cylindrical symmetry in spherical or cylindrical coordinates. To this aim, a key technique is to use \emph{local} Cartesian coordinates to describe the particle velocity in the kinetic model. Thus, the geometric effects, like the divergence and convergence, are described as a \textquotedblleft force term\textquotedblright . Even though the hydrodynamic models are one- or two-dimensional, the DBM needs a Discrete Velocity Model(DVM) with 3 dimensions. We use a DVM with 26 velocities to formulate the DBM which recovers the Navier-Stokes equations with spherical or cylindrical symmetry in the hydrodynamic limit. For the system with \emph{global} cylindrical symmetry, we formulated also a DBM based on a DVM with 2 dimensions and 16 velocities. In terms of the nonconserved moments, we define two sets of measures for the deviations of the system from its thermodynamic equilibrium state. The extension of current model to the multiple-relaxation-time version is straightforward.

cond-mat.stat-mech↗
arXiv2014

Understanding Machine-learned Density Functionals

Kernel ridge regression is used to approximate the kinetic energy of non-interacting fermions in a one-dimensional box as a functional of their density. The properties of different kernels and methods of cross-validation are explored, and highly accurate energies are achieved. Accurate {\em constrained optimal densities} are found via a modified Euler-Lagrange constrained minimization of the total energy. A projected gradient descent algorithm is derived using local principal component analysis. Additionally, a sparse grid representation of the density can be used without degrading the performance of the methods. The implications for machine-learned density functional approximations are discussed.

physics.chem-ph↗
arXiv2014

Efficient and Scalable Algorithms for Smoothed Particle Hydrodynamics on Hybrid Shared/Distributed-Memory Architectures

This paper describes a new fast and implicitly parallel approach to neighbour-finding in multi-resolution Smoothed Particle Hydrodynamics (SPH) simulations. This new approach is based on hierarchical cell decompositions and sorted interactions, within a task-based formulation. It is shown to be faster than traditional tree-based codes, and to scale better than domain decomposition-based approaches on hybrid shared/distributed-memory parallel architectures, e.g. clusters of multi-cores, achieving a $40\times$ speedup over the Gadget-2 simulation code.

cs.DC↗
arXiv2015

Geometrical and electronic structures of tripotassium-doped hydrocarbon superconductors: Density functional calculations

A systemically theoretical study has been presented to explored the crystal structures and electronic characteristics of polycyclic aromatic hydrocarbons (PAHs), such as solid phenanthrene, picene, 1,2;8,9-dibenzopentacene, and 7-phenacenes, since these PAHs exhibited the superconductivity when potassium doping into. For tripotassium-doped phenanthrene and picene, we demonstrate the K atomic positions to fit the experimental lattice parameters, and analyze the distinction between the stablest configuration and the fitted experimental one. Based on the first-principles calculations, for the first time, we predict the possible crystal configurations of pristine and tripotassium-doped 1,2;8,9-dibenzopentacene and 7-phenacenes, respectively. For these four PAHs, the electronic structures after doping are investigated in details. The results show that the electronic characters near the Fermi level are high sensitive to structure. Because of the change of the benzene rings arrangement, the 1,2;8,9-dibenzopentacene exhibits visibly different band structures from other three PAHs. In these metallic PAHs, two bands cross the Fermi level which results in the complicated multiband feature of Fermi surfaces. Fascinatingly, we find that the electronic states of potassium contribute to the Fermi surfaces especially for K-3$d$ electrons, which improves a way to understand this superconductivity. As a result, we suggest that the rigid-band picture is invalidated due to the hybridization between K atoms and PAH molecules as well as the rearrangement and distortion of PAH molecules.

cond-mat.mtrl-sci↗
arXiv2014

An Optimized and Scalable Eigensolver for Sequences of Eigenvalue Problems

In many scientific applications the solution of non-linear differential equations are obtained through the set-up and solution of a number of successive eigenproblems. These eigenproblems can be regarded as a sequence whenever the solution of one problem fosters the initialization of the next. In addition, in some eigenproblem sequences there is a connection between the solutions of adjacent eigenproblems. Whenever it is possible to unravel the existence of such a connection, the eigenproblem sequence is said to be correlated. When facing with a sequence of correlated eigenproblems the current strategy amounts to solving each eigenproblem in isolation. We propose a alternative approach which exploits such correlation through the use of an eigensolver based on subspace iteration and accelerated with Chebyshev polynomials (ChFSI). The resulting eigensolver is optimized by minimizing the number of matrix-vector multiplications and parallelized using the Elemental library framework. Numerical results show that ChFSI achieves excellent scalability and is competitive with current dense linear algebra parallel eigensolvers.

cs.MS↗
arXiv2014

Edge Chemistry Effects on the Structural, Electronic, and Electric Response Properties of Boron Nitride Quantum Dots

The effects of edge hydrogenation and hydroxylation on the relative stability and electronic properties of hexagonal boron nitride quantum dots (h-BNQDs) are investigated. Zigzag edge hydroxylation is found to result in considerable energetic stabilization of h-BNQDs as well as a reduction of their electronic gap with respect to their hydrogenated counterparts. The application of an external in-plane electric field leads to a monotonous decrease of the gap. When compared to their edge-hydrogenated counterparts, significantly lower field intensities are required to achieve full gap closure of the zigzag edge hydroxylated h-BNQDs. These results indicate that edge chemistry may provide a viable route for the design of stable and robust electronic devices based on nanoscale hexagonal boron-nitride systems.

cond-mat.mtrl-sci↗