SEARCH · arXiv Science

Results for “physics.chem-ph”

Search indexed arXiv papers on artificial intelligence, large language models, computer vision and robotics. Read source abstracts and follow links to arXiv.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources

arXiv2013

Distribution of small dispersive coal dust particles and absorbed radioactive chemical elements in conditions of forced acoustic resonance in iodine air filter at nuclear power plant

The physical features of distribution of the small dispersive coal dust particles and the adsorbed radioactive chemical elements and their isotopes in the absorber with the granular filtering medium with the cylindrical coal granules were researched in the case of the intensive air dust aerosol stream flow through the iodine air filter (IAF). It was shown that, at the certain aerodynamic conditions in the IAF, the generation of the acoustic oscillations is possible. It was found that the acoustic oscillations generation results in an appearance of the standing acoustic waves of the air pressure (density) in the IAF. In the case of the intensive blow of the air dust aerosol, it was demonstrated that the standing acoustic waves have some strong influences on both: 1) the dynamics of small dispersive coal dust particles movement and their accumulation in the IAF; 2) the oversaturation of the cylindrical coal granules by the adsorbed radioactive chemical elements and their isotopes in the regions, where the antinodes of the acoustic waves are positioned. Finally, we completed the comparative analysis of the theoretical calculations with the experimental results, obtained for the cases of: 1) the experimental aerodynamic modeling of physical processes of the absorbed radioactive chemical elements and their isotopes distribution in the IAF; and 2) the gamma-activation spectroscopy analysis of the absorbed radioactive chemical elements and their isotopes distribution in the IAF. We made the innovative propositions on the necessary technical modifications with the purpose to improve the IAF technical characteristics and increase its operational time at the nuclear power plant (NPP), going from the completed precise characterization of the IAF parameters at the long term operation.

physics.ao-ph↗

arXiv2013

Local Ionization Dynamics Traced by Photoassisted Scanning Tunneling Microscopy: A Theoretical Approach

For tracing the spatiotemporal evolution of electronic systems, we suggest and analyze theoretically a setup that exploits the excellent spatial resolution based on scanning tunneling microscopy techniques combined with the temporal resolution of femtosecond pump-probe photoelectron spectroscopy. As an example, we consider the laser-induced, local vibrational dynamics of a surface-adsorbed molecule. The photoelectrons released by a laser pulse can be collected by the scanning tip and utilized to access the spatiotemporal dynamics. Our proof-of-principle calculations are based on the solution of the time-dependent Schrooedinger equation supported by the ab initio computation of the matrix elements determining the dynamics.

cond-mat.mes-hall↗

arXiv2013

Describing diffusion, reaction and convection on porous medium

In this paper we present a mathematical model for the electrochemical deposition aimed at the production of inverse opals. The real system consists of an arrangement of sub micrometer spheres, through which the species in an electrolytic medium diffuses until they react to the electrode surface and become part thereof. Our model consists in formulating convenient boundary conditions for the transport equation, that somewhat resembles the real system but is nevertheless simple enough to be solved, and then solve it. Similar approach was taken by Nicholson [1, 2], except that, to avoid the difficulties regarding the boundary conditions, he considered none whatsoever, and proposed a modified diffusion coefficient for the porous medium instead. Apropos, our model, with moving boundary condition pertain to the class of problems know as The Stefan problem [3].

physics.chem-ph↗

arXiv2013

Majorana, Pauling and the quantum theory of the chemical bond

We discuss in detail very little known results obtained by Majorana as early as 1931, regarding the quantum theory of the chemical bond in homopolar molecules, based on the key concept of exchange interaction. After a brief historical overview of the quantum homopolar valence theory, we address the intriguing issues of the formation of the helium molecular ion, He2+, and of the accurate description of the hydrogen molecule, H2. For the first case, the group theory-inspired approach used by Majorana is contrasted with that more known followed by Pauling (and published few months after that of Majorana), while for the second case we focus on his proposal concerning the possible existence of ionic structures in homopolar compounds, just as in the hydrogen molecule. The novelty and relevance of Majorana's results in the modern research on molecular and chemical physics is emphasized as well.

physics.hist-ph↗

arXiv2013

Are there missing bond paths in Trimethylenemethane-Iron-tri-carbonyl [(CO)3Fe-(C4H6)] complex?

In a recent paper [J. Organomet. Chem. (2013) doi: 10.1016 /j.jorganchem. 2013.03.047] analyzing the bonding mode of Trimethylenemethane (TMM) with some metal carbonyls, Mousavi and Frenking have declared the absence of bond paths, the so-called missed bond paths, between metal atoms and terminal carbon atoms in several complexes. In this communication, it is first demonstrated that the presupposition of the equivalence of a bond path and a chemical bond within the context of the quantum theory of atoms in molecules (QTAIM) is superficial and basically flawed which is not only against with the recent strict declaration on the contrary [R.F.W. Bader, J. Phys. Chem. A 113 (2009) 10396], but also in odd with the foundations of the QTAIM. Then, it is demonstrated that the so-called missed bond paths indeed appear in molecular graphs of some non-equilibrium geometries that are energetically quite accessible at room temperatures. To emphasize on the importance of this observation the term passionate neighbors is coined referring to the atomic basins that do not share an inter-atomic surface at the equilibrium geometry but are neighbors, share an inter-atomic surface, at non-equilibrium geometries accessible by nuclear vibrations. Using the delocalization index as well as other evidence from previous literature it is demonstrated that the QTAIM analysis is indeed compatible with the presence of chemical bonds between iron metal and terminal carbons in (CO)3Fe-TMM complex. Finally, some general discussions are done to unravel the delicate relationship between the QTAIM proposed concepts, e.g. bond paths and molecular graphs, and some orthodox concepts of chemistry, e.g. chemical bonds and chemical structures, emphasizing that there is no one-to-one relationship between these two categorizes.

physics.chem-ph↗

arXiv2013

On Corrections to the Born-Oppenheimer Approximation

This report presents a new approach for treating the coupling of electrons and nuclei in quantum mechanical calculations for molecules and condensed matter. It includes the standard "Born-Oppenheimer approximation" as a special case but treats both adiabatic and non-adiabatic corrections using perturbation theory. The adiabatic corrections include all terms that do not explicitly involve the nuclear wavefunctions, so that the nuclei move on a single electronic potential surface. The non-adiabatic corrections, which allow the nuclei to move on more than one potential surface, include coupling between the electronic and nuclear wavefunctions. The method is related to an approach first proposed by Born and Huang, but it differs in the methodology and in the definition of the electronic wavefunctions and potential surfaces. A simple example is worked out to illustrate the mechanics of the technique. The report also includes a review of previous work.

physics.chem-ph↗

arXiv2013

An Equation of State for Helium

This report describes a new equation of state (EOS) for helium. The PANDA code was used to construct separate EOS tables for the solid and fluid phases. The solid and fluid EOS were then assembled into a multiphase EOS table using the PANDA phase transition option. Contributions from thermal electronic excitation and ionization were also included in the model. The EOS gives very good agreement with all static and shock-wave data, except at temperatures below 20K, where further work is needed. This EOS was developed primarily for use in models of the giant planets, the sun, and stars but should be useful in other applications as well.

physics.chem-ph↗

arXiv2013

Building the Chessboard-like Supramolecular Structure on Au (111) Surfaces

We investigate an anthracene derivative, 3(5)-(9-anthryl) pyrazole (ANP), self-assembled on the Au (111) surface by means of scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. A chessboard-like network structure composed of ANP molecules is found, covering the whole Au (111) substrate. Our STM results and DFT calculations reveal that the formation of chessboard-like networks originates from a basic unit cell, a tetramer structure, which is formed by four ANP molecules connected through C-H-N hydrogen-bonds. The hydrogen bonds inside each tetramer and the molecular adsorption interaction are fundamentally important in providing a driving force for formation of the supramolecular networks.

physics.chem-ph↗

arXiv2013

Equation of State and Constitutive Models for Numerical Simulations of Dust Impacts on the Solar Probe

This report presents new EOS and strength models for use in numerical hydrocode simulations of dust impacts on the NASA solar probe space vehicle. This spacecraft will be subjected to impact at velocities up to 300 km/s, producing pressures as high as 100 TPa and temperatures as high as 200 eV. Hence the material models must treat a variety of physical and chemical phenomena, including solid-solid transitions, melting and vaporization, chemical reactions, electronic excitation and ionization. The EOSPro code is used to develop tabular EOS that include these effects. The report discusses the theoretical methods used to create the new EOS tables and constitutive models for six materials--Al2O3, two porous carbon materials, fused SiO2, a silicone elastomer, and germanium--which will be used in the thermal protection shield (TPS) and solar cells, the components most vulnerable to dust impacts. It also presents the results of hydrocode simulations of dust impacts on the TPS and on glass targets. It discusses the importance of radiation contributions to the EOS and the importance of reactions between Al2O3 and carbon during impacts. It makes recommendations for additional work, including experiments for testing the accuracy and reliability of the hydrocode simulations as well as for improving and calibrating the material models.

astro-ph.EP↗

arXiv2013

Calculation of Release Adiabats and Shock Impedance Matching

In the analysis of impedance-match experiments, the release adiabat of the standard material is often approximated by reflecting the Hugoniot in the pressure-particle velocity (P-UP) plane. In cases where it has been tested experimentally, this reflected shock approximation (RSA) has been found to be fairly accurate at pressures as high as 100 GPa. The success of the RSA is usually attributed to the lack of thermal effects, i.e., that the Hugoniot and release adiabat are nearly identical in the pressure-density (P-rho) plane. This report demonstrates that this explanation is not correct. The success of the RSA does not arise from the absence of thermal effects--it arises because of thermal effects. When the Hugoniot and adiabat are identical in the P-rho plane, the adiabat lies below the reflected Hugoniot when mapped into the P-UP plane. Material strength effects also cause the exact adiabat to lie below the RSA. A thermal offset between the Hugoniot and the adiabat compensates for these two effects, so that the RSA turns out to give good results for many materials, even at high pressures. However, this fortuitous cancellation of errors does not occur in all cases. This report shows that the RSA is not accurate for two "soft" materials, Teflon and PMMA, and for a high-strength material, tungsten. The issues discussed here apply to use of the RSA at low pressures, not to very high pressures, where it is already well-known to be inaccurate.

cond-mat.mtrl-sci↗

arXiv2013

Titanium dioxide (TiO2) Nanoparticles XRD Analyses: An Insight

This work reports aspect related to nano-sized particles of tetragonal anatase phase Titania. This approach is simple, faster, Eco-friendly, cost effective and suitable for large scale production. X-Ray Diffraction studies analyze particles size. It is found to be 74 nm and specific surface area is 19.16m2g-1. Morphology index (MI) derived from FWHM of XRD data explains the interrelationship of particle size and specific surface area. It is observed that MI has direct relationship with particle size and an inverse relationship with specific surface area. This work throws some light on and helps in the production line of Titania nano-particles.

physics.chem-ph↗

arXiv2013

Molten Air -- A new, highest energy class of rechargeable batteries

This study introduces the principles of a new class of batteries, rechargeable molten air batteries, and several battery chemistry examples are demonstrated. The new battery class uses a molten electrolyte, are quasi reversible, and have amongst the highest intrinsic battery electric energy storage capacities. Three examples of the new batteries are demonstrated. These are the iron, carbon and VB2 molten air batteries with respective intrinsic volumetric energy capacities of 10,000, 19,000 and 27,000 Wh per liter.

physics.chem-ph↗

arXiv2013

Phase Separation in Soft Matter: Concept of Dynamic Asymmetry

Phase separation is a fundamental phenomenon that produces spatially heterogeneous patterns in soft matter. In this Lecture Note we show that phase separation in these materials generally belongs to what we call "viscoelastic phase separation", where the morphology is determined by the mechanical balance of not only the thermodynamic force (interface tension) but also the viscoelastic force. The origin of the viscoelastic force is dynamic asymmetry between the components of a mixture, which can be caused by either a size disparity or a difference in the glass transition temperature between the components. We stress that such dynamic asymmetry generally exists in soft matter. The key is that dynamical asymmetry leads to a non-trivial coupling between the concentration, velocity, and stress fields. Viscoelastic phase separation can be explained by viscoelastic relaxation in pattern evolution and the resulting switching of the relevant order parameter, which are induced by the competition between the deformation rate of phase separation and the slowest mechanical relaxation rate of a system. We also discuss an intimate link of viscoelastic phase separation, where deformation fields are spontaneously generated by phase separation itself, to mechanical instability (or fracture) of glassy material, which is induced by externally imposed strain fields. We propose that all these phenomena can be understood as mechanically-driven inhomogeneization in a unified manner.

cond-mat.soft↗

arXiv2013

DFT-GGA errors in NO chemisorption energies on (111) transition metal surfaces: Possible origins and correction schemes

Here we investigate whether well-known DFT-GGA errors in predicting the chemisorption energy ($E_{\rm chem}$) of CO on transition metal surfaces manifest in analogous NO chemisorption systems. To verify the occurrence of DFT-GGA overestimation of the back-donation mechanism in NO Chemisorption, we use electronic structure analysis to show that the partially filled molecular NO 2$π^{*}$ orbital rehybridizes with the transition metal $d$-band to form new bonding and anti-bonding states. We relate the back-donation charge transfer associated with chemisorption to the promotion of an electron from the 5$σ$ orbital to the 2$π^{*}$ orbital in the gas-phase NO G$^{2}Σ^{-}\leftarrow \rm{X}^{2}Π$ excitation. We establish linear relationships between $E_{\rm chem}$ and $ΔE_{\rm G\leftarrow X}$ and go on to formulate an $E_{\rm chem}$ correction scheme in the style of Mason {\it et al.}, {[Physical Review B {\bf 69}, 161401(R)]}. We apply the NO $E_{\rm chem}$ correction method to the (111) surfaces of Pt, Pd, Rh, and Ir, with NO chemisorption modeled at a coverage of 0.25 ML. We note that both the slope of $E_{\rm chem}$ {\it vs.} $ΔE_{\rm G\leftarrow X}$ and the dipole moment depend strongly on adsorption site for each metal, and we use this fact to construct an approximate correction scheme which we go on to test using NO/Pt(100) chemisorption.

physics.chem-ph↗

arXiv2013

Protein Energy Landscapes Determined by 5-Dimensional Crystallography

Free energy landscapes decisively determine the progress of enzymatically catalyzed reactions[1]. Time-resolved macromolecular crystallography unifies transient-state kinetics with structure determination [2-4] because both can be determined from the same set of X-ray data. We demonstrate here how barriers of activation can be determined solely from five-dimensional crystallography [5]. Directly linking molecular structures with barriers of activation between them allows for gaining insight into the structural nature of the barrier. We analyze comprehensive time series of crystal-lographic data at 14 different temperature settings and determine entropy and enthalpy contributions to the barriers of activation. 100 years after the discovery of X-ray scattering, we advance X-ray structure determination to a new frontier, the determination of energy landscapes.

physics.bio-ph↗

arXiv2013

Features of adsorbed radioactive chemical elements and their isotopes distribution in iodine air filters AU-1500 at nuclear power plants

The main aim of research is to investigate the physical features of spatial distribution of the adsorbed radioactive chemical elements and their isotopes in the granular filtering medium in the iodine air filters of the type of AU1500 in the forced exhaust ventilation systems at the nuclear power plant. The gamma activation analysis method is applied to accurately characterize the distribution of the adsorbed radioactive chemical elements and their isotopes in the granular filtering medium in the AU1500 iodine air filter after its long term operation at the nuclear power plant. The typical spectrum of the detected chemical elements and their isotopes in the AU1500 iodine air filter, which was exposed to the bremsstrahlung gamma quantum irradiation, produced by the accelerating electrons in the tantalum target, are obtained. The spatial distributions of the detected chemical element 127I and some other chemical elements and their isotopes in the layer of absorber, which was made of the cylindrical coal granules of the type of SKT3, in the AU1500 iodine air filter are also researched. The possible influences by the standing acoustic wave of air pressure in the iodine air filter on the spatial distribution of the chemical elements and their isotopes in the iodine air filter are discussed. The comprehensive analysis of obtained research results on the distribution of the adsorbed chemical elements and their isotopes in the absorber of iodine air filter is performed.

physics.ao-ph↗

arXiv2013

A new DFT method for atoms and molecules in Cartesian grid

Electronic structure calculation of atoms and molecules, in the past few decades has largely been dominated by density functional methods. This is primarily due to the fact that this can account for electron correlation effects in a rigorous, tractable manner keeping the computational cost at a manageable level. With recent advances in methodological development, algorithmic progress as well as computer technology, larger physical, chemical and biological systems are amenable to quantum mechanical calculations than ever before. Here we report the development of a new method for accurate reliable description of atoms, molecules within the Hohenberg-Kohn-Sham density functional theory (DFT). In a Cartesian grid, atom-centered localized basis set, electron density, molecular orbitals, two-body potentials are directly built on the grid. We employ a Fourier convolution method for classical Coulomb potentials by making an Ewald-type decomposition technique in terms of short- and long-range interactions. One-body matrix elements are obtained from standard recursion algorithms while two-body counterparts are done by direct numerical integration. A systematic analysis of our results obtained on various properties, such as component energy, total energy, ionization energy, potential energy curve, atomization energy, etc., clearly demonstrates that the method is capable of producing quite accurate and competitive (with those from other methods in the literature) results. In brief, a new variational DFT method is presented for atoms and molecules, \emph{completely} in Cartesian grid.

physics.chem-ph↗

arXiv2013

More accurate and efficient bath spectral densities from super-resolution

Quantum transport and other phenomena are typically modeled by coupling the system of interest to an environment, or bath, held at thermal equilibrium. Realistic bath models are at least as challenging to construct as models for the quantum systems themselves, since they must incorporate many degrees of freedom that interact with the system on a wide range of timescales. Owing to computational limitations, the environment is often modeled with simple functional forms, with a few parameters fit to experiment to yield semi-quantitative results. Growing computational resources have enabled the construction of more realistic bath models from molecular dynamics (MD) simulations. In this paper, we develop a numerical technique to construct these atomistic bath models with better accuracy and decreased cost. We apply a novel signal processing technique, known as super-resolution, combined with a dictionary of physically-motivated bath modes to derive spectral densities from MD simulations. Our approach reduces the required simulation time and provides a more accurate spectral density than can be obtained via standard Fourier transform methods. Moreover, the spectral density is provided as a convenient closed-form expression which yields an analytic time-dependent bath kernel. Exciton dynamics of the Fenna-Matthews-Olsen light-harvesting complex are simulated with a second order time-convolutionless master equation, and spectral densities constructed via super-resolution are shown to reproduce the dynamics using only a quarter of the amount of MD data.

quant-ph↗