arXiv subjects

Zixuan Guo

Publications and source records attributed to Zixuan Guo.

At least 19 recordsLinked to original sources

arXiv2026

Zero-dimensional multi-physics-constrained parameter design and optimization for advanced quasi-isodynamic stellarators

A zero-dimensional (0D) multi-physics-constrained framework for parameter design and optimization of Stable Quasi-Isodynamic Designs (SQuIDs) is presented. Single- and multi-objective optimizations for three staged devices are carried out using an in-house stellarator 0D systems code: YF-1 for discharge demonstration, YF-2 for scientific break even, and YF-3 for a commercial demonstration plant. Pareto searches map the main design trade-offs across the three generations. The equal weight optima for YF-2 and YF-3 both lie in the electron-root favorable regime of the adopted root proxy: YF-2 recovers $Q_{phys} \sim 1$, while YF-3 reaches an ignited point at reactor scale. Future work will couple engineering feasibility and economic assessment modules for integrated plant evaluation.

physics.plasm-ph↗

arXiv2026

Think at 5 Hz, Act at 20 Hz: Asynchronous Fast-Slow Vision-Language-Action Inference for Closed-Loop Driving

Large language models bring instruction following and scene reasoning to end-to-end driving, but their inference latency collides with the control rate a vehicle requires. Existing closed-loop agents hide this gap by invoking the model on alternate simulation ticks and replaying the previous command in between, so half of all control outputs ignore the newest observations. We present a fast-slow architecture that removes this compromise. A frozen 7B vision-language backbone acts as the slow system, digesting navigation instructions and visual history at low frequency while exposing its per-layer key-value cache as a standing representation of the scene. A lightweight action expert acts as the fast system, attending to this cache and to the current camera frame at every simulation tick to regress waypoints in a single forward pass. Since the cache lags behind the world at deployment, we train the expert under randomized staleness, aligning training with asynchronous execution. On LangAuto-Short routes in CARLA, our system produces fresh control at every 50 ms simulation tick and lifts route completion from 37.0 to 94.0 over the frame-skipping baseline. A frame-skip ablation with the same expert separates the two factors at work: the expert raises the driving score on its own, while per-tick freshness raises completion from 82.1 to 94.0 and cuts red-light violations by a third. Trained on a single town, the expert transfers zero-shot to two unseen towns, holding 84-94% route completion where the baseline reaches 31-41%. It reduces open-loop waypoint error by nearly a factor of four compared to the backbone's own action head, at a per-tick model cost of 32 ms that is independent of history length on a single consumer GPU.

cs.RO↗

arXiv2026

BALTO: Balanced Token-Level Policy Optimization for Hallucination Mitigation

Hallucinations remain a major obstacle to deploying large language models (LLMs) in knowledge-intensive settings, where generated responses must be faithfully grounded in provided evidence. Reinforcement learning (RL) is a promising direction for hallucination mitigation, but response-level faithfulness rewards suffer from a granularity mismatch: localized hallucinations can cause supported content to receive spurious penalties. Although recent work introduces fine-grained feedback such as claim-level verification and token-level rewards, unbalanced credit assignment can still induce length, verbosity, or optimization-noise biases. We propose BALTO, a Balanced Token-level Policy Optimization framework for hallucination mitigation. BALTO extracts checkable factual claims, verifies them against the reference context, and projects claim-level judgments to token-level labels. A balanced token-level credit assignment mechanism is introduced into the framework. This design redistributes probability mass from unsupported content toward faithful content, rather than suppressing the entire response. We systematically analyze the limitations of response-level rewards from a theoretical standpoint, and prove BALTO's advantages in training stability and optimization efficiency for hallucination mitigation. Experiments on ConFiQA, RAGTruth, and FinLLM-Eval show that BALTO achieves the highest faithfulness across all six model--benchmark settings and consistently outperforms existing post-training baselines in Q-Score, demonstrating a stronger faithfulness--informativeness trade-off.

cs.CL↗

arXiv2026

RMPrior: Bridging Propagation Priors and Diffusion Refinement for Efficient Radio Map Construction

Diffusion models achieve high-fidelity radio map construction through iterative denoising, yet their sampling cost limits practicality in dynamic wireless systems where radio maps must be refreshed repeatedly. Meanwhile, classical propagation models encode valuable scene-level knowledge that standard diffusion inference discards entirely by initializing from pure Gaussian noise. This paper bridges propagation priors and diffusion refinement through a mid-start sampling strategy. A matched propagation prior is perturbed to an intermediate diffusion timestep, and the pretrained diffusion backbone executes only the remaining reverse steps, focusing computation on multipath-aware refinement rather than full reconstruction from noise. We provide theoretical analysis establishing an upper bound on the initialization gap, a sufficient condition under which truncation improves reconstruction fidelity, and a formal characterization of prior-quality sensitivity under aggressive truncation. Experiments on IRT4HighRes show that, at $P_{\text{start}}=0.5$, the proposed method achieves a $2.01\times$ speedup while simultaneously improving NMSE, RMSE, SSIM, and PSNR over the full-step baseline. A prior-quality ablation across three propagation models of different fidelity confirms that reconstruction quality tracks prior quality, with the sensitivity amplified under shorter reverse trajectories, consistent with the theoretical predictions. These results also suggest that mid-start reconstruction quality can serve as a proxy for ranking the scene-level fidelity of different propagation models.

cs.LG↗

arXiv2026

Anticipate and Learn: Unleashing Idle-Time Compute in Proactive Agents

While AI agents demonstrate remarkable capabilities in reasoning and tool use, they remain fundamentally reactive: they compute responses only after explicit user prompts. This paradigm ignores a critical opportunity: the idle time between interactions is largely wasted, leaving agents unable to prepare for future user needs. To bridge this gap, we introduce ProAct, a proactive agent architecture that leverages idle-time compute to anticipate and fulfill likely upcoming user needs. By analyzing evolving dialogue history together with persistent memory, ProAct predicts upcoming needs and iteratively acquires information, allowing the agent to resolve knowledge gaps and prepare evidence before the user initiates a query. To rigorously evaluate proactive capabilities, we also introduce ProActEval, a comprehensive benchmark comprising 200 scenarios across 40 domains, featuring predictable need chains and diverse user cognitive profiles. Empirical results demonstrate significant advantages over reactive baselines. ProAct accelerates task completion by reducing required turns by 14.8%, decreases user effort by 11.7%, and cuts hallucination rates by 28.1% on ProActEval. Furthermore, MemBench evaluations confirm that ProAct achieves state-of-the-art reflective accuracy, underscoring its sustained and robust performance.

cs.CL↗

arXiv2026

LoViF 2026 The First Challenge on Holistic Quality Assessment for 4D World Model (PhyScore)

This paper reports on the LoViF 2026 PhyScore challenge, a competition on holistic quality assessment of world-model-generated videos across both 2D and 4D generation settings. The challenge is motivated by a central gap in current evaluation practice: perceptual quality alone is insufficient to judge whether generated dynamics are physically plausible, temporally coherent, and consistent with input conditions. Participants are required to build a metric that jointly predicts four dimensions, i.e., Video Quality, Physical Realism, Condition-Video Alignment, and Temporal Consistency. Depart from that, participants also need to localize physical anomaly timestamps for fine-grained diagnosis. The benchmark dataset contains 1,554 videos generated by seven representative world generative models, organized into three tracks (text-2D, image-to-4D, and video-to-4D) and spanning 26 categories. These categories explicitly cover physics-relevant scenarios, including dynamics, optics, and thermodynamics, together with diverse real-world and creative content. To ensure label reliability, scores and anomaly timestamps are produced through trained human annotation with an additional automated quality-control pass. Evaluation is based on both score prediction and anomaly localization, with a composite protocol that combines TimeStamp_IOU and SRCC/PLCC. This report summarizes the challenge design and provides method-level insights from submitted solutions.

cs.CV↗

arXiv2026

NTIRE 2026 3D Restoration and Reconstruction in Real-world Adverse Conditions: RealX3D Challenge Results

This paper presents a comprehensive review of the NTIRE 2026 3D Restoration and Reconstruction (3DRR) Challenge, detailing the proposed methods and results. The challenge seeks to identify robust reconstruction pipelines that are robust under real-world adverse conditions, specifically extreme low-light and smoke-degraded environments, as captured by our RealX3D benchmark. A total of 279 participants registered for the competition, of whom 33 teams submitted valid results. We thoroughly evaluate the submitted approaches against state-of-the-art baselines, revealing significant progress in 3D reconstruction under adverse conditions. Our analysis highlights shared design principles among top-performing methods and provides insights into effective strategies for handling 3D scene degradation.

cs.CV↗

arXiv2026

RadioDiff-FS: Physics-Informed Manifold Alignment in Few-Shot Diffusion Models for High-Fidelity Radio Map Construction

Radio maps (RMs) provide spatially continuous propagation characterizations essential for 6G network planning, but high-fidelity RM construction remains challenging. Rigorous electromagnetic solvers incur prohibitive computational latency, while data-driven models demand massive labeled datasets and generalize poorly from simplified simulations to complex multipath environments. This paper proposes RadioDiff-FS, a few-shot diffusion framework that adapts a pretrained main-path generator to multipath-rich target domains with only a small number of high-fidelity samples. The adaptation is grounded in a theoretical decomposition of the multipath RM into a dominant main-path component and a directionally sparse residual. This decomposition shows that the cross-domain shift corresponds to a bounded and geometrically structured feature translation rather than an arbitrary distribution change. A direction-consistency loss (DCL) is then introduced to constrain diffusion score updates along physically plausible propagation directions, thereby suppressing phase-inconsistent artifacts that arise in the low-data regime. Experiments show that RadioDiff-FS reduces NMSE by 59.5\% on static RMs and by 74.0\% on dynamic RMs relative to the vanilla diffusion baseline, achieving an SSIM of 0.9752 and a PSNR of 36.37 dB under severely limited supervision. Even in a one-shot setting with a single target-domain sample per scene, RadioDiff-FS outperforms all fully supervised baselines, confirming that the directional constraint provides an effective inductive bias under extreme data scarcity. Code is available at https://github.com/UNIC-Lab/RadioDiff-FS.

eess.SY↗

arXiv2026

Tilt-Ropter: A Fully Actuated Hybrid Aerial-Terrestrial Vehicle with Tilt Rotors and Passive Wheels

In this work, we present Tilt-Ropter, a fully actuated hybrid aerial-terrestrial vehicle (HATV) that integrates tilt rotors with passive wheels to enable efficient multi-modal locomotion. Unlike conventional underactuated HATVs, the fully actuated design of Tilt-Ropter allows decoupled force and torque control, improving maneuverability and ground locomotion efficiency. A unified nonlinear model predictive controller (NMPC) is developed to track reference trajectories, enforce non-holonomic constraints, and accommodate contact effects across locomotion modes, while ensuring actuator feasibility through dedicated control allocation. To address complex wheel-ground dynamics, an external wrench estimator is incorporated to provide real-time interaction wrench estimates. The system is validated through simulation and real-world experiments, including seamless air-ground transitions and trajectory tracking tasks. Experimental results demonstrate low tracking errors in both modes and reveal a 92.8% reduction in power consumption during ground locomotion compared with flight, highlighting the platform's potential for long-duration missions where energy efficiency is critical.

cs.RO↗

arXiv2025

Time of the Flight of the Gaussians: Optimizing Depth Indirectly in Dynamic Radiance Fields

We present a method to reconstruct dynamic scenes from monocular continuous-wave time-of-flight (C-ToF) cameras using raw sensor samples that achieves similar or better accuracy than neural volumetric approaches and is 100x faster. Quickly achieving high-fidelity dynamic 3D reconstruction from a single viewpoint is a significant challenge in computer vision. In C-ToF radiance field reconstruction, the property of interest-depth-is not directly measured, causing an additional challenge. This problem has a large and underappreciated impact upon the optimization when using a fast primitive-based scene representation like 3D Gaussian splatting, which is commonly used with multi-view data to produce satisfactory results and is brittle in its optimization otherwise. We incorporate two heuristics into the optimization to improve the accuracy of scene geometry represented by Gaussians. Experimental results show that our approach produces accurate reconstructions under constrained C-ToF sensing conditions, including for fast motions like swinging baseball bats. https://visual.cs.brown.edu/gftorf

cs.GR↗

arXiv2025

No More Head-Turning: Exploring Passthrough Techniques for Addressing Rear Interruptions from the Front in VR

Virtual reality (VR) users often encounter interruptions, posing challenges to maintaining real-world awareness during immersive experiences. The Passthrough feature in VR headsets allows users to view their physical surroundings without removing the headset. However, when interruptions come from the rear, users need to turn their heads to see the real world, which can lead to negative experiences in VR. Study 1, conducted through semi-structured interviews involving 13 participants, found that users are less likely to use Passthrough for rear interruptions due to large head-turning movements, which cause inconvenience, increase the risk of motion sickness, and reduce the experience. Building on these findings, we introduced three Passthrough techniques in Study 2 for displaying the rear view in front of the user: Full Rear Passthrough + Pause (FRPP), Rear Passthrough Window (RPW), and Rear Passthrough AR (RPAR). Compared to the Baseline method that requires head-turning, all three systems reduced physical and temporal demands, alleviated disorientation caused by motion sickness, and provided a better user experience for managing rear interruptions. Among these, FRPP and RPAR were the most preferred. These findings provide valuable insights for future VR design, emphasizing the need for solutions that effectively manage rear interruptions while maintaining user comfort and experience.

cs.HC↗

arXiv2024

LIVE-GS: LLM Powers Interactive VR Experience with Physics-Aware Gaussian Splatting

As 3D Gaussian Splatting (3DGS) emerges as a leading approach for novel view synthesis and scene reconstruction, its potential in digital asset creation has gained significant attention. An increasing number of asset libraries based on GS are being established. However, generating physics-based dynamic assets remains a time-consuming and expertise-intensive task, especially for non-experts. In this paper, we propose LIVE-GS, a highly realistic Virtual Reality (VR) system powered by Large Language Models (LLMs), which enables rapid creation of dynamic Gaussian assets and real-time VR interactions. To inform our system design, we conducted interviews to examine challenges faced by current GS-based VR systems and the specific demands of users. Based on these insights, we employed GPT-4o to analyze key physical properties of objects that significantly impact user interactions, ensuring physics-based interactions in VR align with real-world phenomena. A key innovation of LIVE-GS is its ability to predict reasonable parameters in just 10 seconds from static Gaussian assets while maintaining high-quality VR interactions. To validate our approach, we invited participants experienced in physical simulation to manually adjust physical parameters, providing a baseline for comparison in both asset quality and authoring efficiency. We also conducted a comprehensive user study to evaluate system usability and user satisfaction. Experimental results demonstrate that LIVE-GS, leveraging LLMs' scene understanding capabilities, can achieve efficient physical scene creation and natural interactions without requiring manual design or annotation.

cs.HC↗

arXiv2024

PointTalk: Audio-Driven Dynamic Lip Point Cloud for 3D Gaussian-based Talking Head Synthesis

Talking head synthesis with arbitrary speech audio is a crucial challenge in the field of digital humans. Recently, methods based on radiance fields have received increasing attention due to their ability to synthesize high-fidelity and identity-consistent talking heads from just a few minutes of training video. However, due to the limited scale of the training data, these methods often exhibit poor performance in audio-lip synchronization and visual quality. In this paper, we propose a novel 3D Gaussian-based method called PointTalk, which constructs a static 3D Gaussian field of the head and deforms it in sync with the audio. It also incorporates an audio-driven dynamic lip point cloud as a critical component of the conditional information, thereby facilitating the effective synthesis of talking heads. Specifically, the initial step involves generating the corresponding lip point cloud from the audio signal and capturing its topological structure. The design of the dynamic difference encoder aims to capture the subtle nuances inherent in dynamic lip movements more effectively. Furthermore, we integrate the audio-point enhancement module, which not only ensures the synchronization of the audio signal with the corresponding lip point cloud within the feature space, but also facilitates a deeper understanding of the interrelations among cross-modal conditional features. Extensive experiments demonstrate that our method achieves superior high-fidelity and audio-lip synchronization in talking head synthesis compared to previous methods.

cs.SD↗

arXiv2024

D$^2$-World: An Efficient World Model through Decoupled Dynamic Flow

This technical report summarizes the second-place solution for the Predictive World Model Challenge held at the CVPR-2024 Workshop on Foundation Models for Autonomous Systems. We introduce D$^2$-World, a novel World model that effectively forecasts future point clouds through Decoupled Dynamic flow. Specifically, the past semantic occupancies are obtained via existing occupancy networks (e.g., BEVDet). Following this, the occupancy results serve as the input for a single-stage world model, generating future occupancy in a non-autoregressive manner. To further simplify the task, dynamic voxel decoupling is performed in the world model. The model generates future dynamic voxels by warping the existing observations through voxel flow, while remaining static voxels can be easily obtained through pose transformation. As a result, our approach achieves state-of-the-art performance on the OpenScene Predictive World Model benchmark, securing second place, and trains more than 300% faster than the baseline model. Code is available at https://github.com/zhanghm1995/D2-World.

cs.CV↗

arXiv2024

GaussianPU: A Hybrid 2D-3D Upsampling Framework for Enhancing Color Point Clouds via 3D Gaussian Splatting

Dense colored point clouds enhance visual perception and are of significant value in various robotic applications. However, existing learning-based point cloud upsampling methods are constrained by computational resources and batch processing strategies, which often require subdividing point clouds into smaller patches, leading to distortions that degrade perceptual quality. To address this challenge, we propose a novel 2D-3D hybrid colored point cloud upsampling framework (GaussianPU) based on 3D Gaussian Splatting (3DGS) for robotic perception. This approach leverages 3DGS to bridge 3D point clouds with their 2D rendered images in robot vision systems. A dual scale rendered image restoration network transforms sparse point cloud renderings into dense representations, which are then input into 3DGS along with precise robot camera poses and interpolated sparse point clouds to reconstruct dense 3D point clouds. We have made a series of enhancements to the vanilla 3DGS, enabling precise control over the number of points and significantly boosting the quality of the upsampled point cloud for robotic scene understanding. Our framework supports processing entire point clouds on a single consumer-grade GPU, such as the NVIDIA GeForce RTX 3090, eliminating the need for segmentation and thus producing high-quality, dense colored point clouds with millions of points for robot navigation and manipulation tasks. Extensive experimental results on generating million-level point cloud data validate the effectiveness of our method, substantially improving the quality of colored point clouds and demonstrating significant potential for applications involving large-scale point clouds in autonomous robotics and human-robot interaction scenarios.

cs.RO↗

arXiv2024

Exploring the Impact of Passthrough on VR Exergaming in Public Environments: A Field Study

Sedentary behavior is becoming increasingly prevalent in daily work and study environments. VR exergaming has emerged as a promising solution in these places of work and study. However, private spaces in these environments are not easy, and engaging in VR exergaming in public settings presents its own set of challenges (e.g., safety, social acceptance, isolation, and privacy protection). The recent development of Passthrough functionality in VR headsets allows users to maintain awareness of their surroundings, enhancing safety and convenience. Despite its potential benefits, little is known about how Passthrough could affect user performance and experience and solve the challenges of playing VR exergames in real-world public environments. To our knowledge, this work is the first to conduct a field study in an underground passageway on a university campus to explore the use of Passthrough in a real-world public environment, with a disturbance-free closed room as a baseline. Results indicate that enabling Passthrough in a public environment improves performance without compromising presence. Moreover, Passthrough can increase social acceptance, especially among individuals with higher levels of self-consciousness. These findings highlight Passthrough's potential to encourage VR exergaming adoption in public environments, with promising implications for overall health and well-being.

cs.HC↗

arXiv2024

Enhancement of Co-located Shared VR Experiences: Representing Non-HMD Observers on Both HMD and 2D Screen

Virtual reality (VR) not only allows head-mounted display (HMD) users to immerse themselves in virtual worlds but also to share them with others. When designed correctly, this shared experience can be enjoyable. However, in typical scenarios, HMD users are isolated by their devices, and non-HMD observers lack connection with the virtual world. To address this, our research investigates visually representing observers on both HMD and 2D screens to enhance shared experiences. The study, including five representation conditions, reveals that incorporating observer representation positively impacts both HMD users and observers. For how to design and represent them, our work shows that HMD users prefer methods displaying real-world visuals, while observers exhibit diverse preferences regarding being represented with real or virtual images. We provide design guidelines tailored to both displays, offering valuable insights to enhance co-located shared VR experiences for HMD users and non-HMD observers.

cs.HC↗

arXiv2023

Who's Watching Me?: Exploring the Impact of Audience Familiarity on Player Performance, Experience, and Exertion in Virtual Reality Exergames

Familiarity with audiences plays a significant role in shaping individual performance and experience across various activities in everyday life. This study delves into the impact of familiarity with non-playable character (NPC) audiences on player performance and experience in virtual reality (VR) exergames. By manipulating of NPC appearance (face and body shape) and voice familiarity, we explored their effect on game performance, experience, and exertion. The findings reveal that familiar NPC audiences have a positive impact on performance, creating a more enjoyable gaming experience, and leading players to perceive less exertion. Moreover, individuals with higher levels of self-consciousness exhibit heightened sensitivity to the familiarity with NPC audiences. Our results shed light on the role of familiar NPC audiences in enhancing player experiences and provide insights for designing more engaging and personalized VR exergame environments.

cs.HC↗