arXiv Science⌕ Search

arXiv subjects

Zirou Chen

Publications and source records attributed to Zirou Chen.

3 recordsLinked to original sources

Thermal and Acoustic Measurements of Hybrid Bonding Stacks

Thermal and structural characterizations of hybrid bonding structures are essential for understanding heat transport in three-dimensional integrated circuits (3D-ICs). In this work, we investigate the effective thermal conductivity of the Cu/dielectric HB layer using time-domain thermoreflectance (TDTR) combined with picosecond ultrasonic technique. Shallow-angle polishing enabled depth-resolved thermal measurements by exposing hybrid bonding layers with different remaining thicknesses, while acoustic echoes were used to identify buried interfaces and determine the thickness. The distinct waveform of the bonding interface echo compared with the Cu/dielectric interface echo suggests that its acoustic response may also reflect the interfacial bonding conditions. The extracted thermal conductivity ranges from 1.14 to 1.75 Wm-1K-1 for the bottom pad layer and from 1.76 to 4.34 Wm-1K-1 for the top pad layer. The difference in thermal conductivity is consistent with the different Cu area fractions of the two layers. Furthermore, the thermal conductivity of the top pad layer increases significantly with the remaining thickness, possibly due to the thermal boundary resistance at the bonding interface, low thermal conductivity of SiCN interlayer, and increased electron scattering in thin Cu structures. Our work demonstrates a practical approach to investigate the thermal properties of buried hybrid bonding layers, providing experimental data for thermal design and modeling of 3D-ICs.

physics.app-ph↗

Resolving the Thermal Labyrinth inside 3D-IC Stacks

The heat pathways in 3D-ICs have long been a labyrinth lacking experimental investigations into spatial distribution of thermal properties, severely limiting study of internal thermal management inside chips. For the first time, we established a methodology for 3D thermal characterizations of advanced 3D-ICs, implemented through a systematic workflow that enables layer-resolved thermal property extraction and the construction of a location-specific thermal database. We demonstrated its application to an advanced sample featuring 2.2-μm-diameter TSVs and ~2-μm-pitch face-to-face hybrid bonding (HB). Time-domain and steady-state thermoreflectance were used to extract the thermal conductivities (TCs) of Al traces, TSV, BEOL interconnects and HB pads, indicating HB structure enables efficient thermal transport with 9 W/m-K TC. Further, we mapped and visualized the TC distribution of TSV structures and RDL Cu wires with small step sizes down to 0.2 μm. Utilizing these results, we proposed an experiment-based thermal model to reveal that co-evolution of interconnect and substrate TCs is essential for thermal design and fabrication towards effective cooling optimization.

physics.app-ph↗

High Thermal Conductivity in Back-End-of-Line Compatible AlN Thin Films

With thermal issues becoming a major challenge to the development of integrated circuits (ICs), high-thermal-conductivity (high-TC) materials are gaining interest from both the industry and academia, especially for high-density back-end-of-line (BEOL) structures. Aluminum nitride (AlN) is an insulating material with high TC, suitable for thermal management in electronic devices. Furthermore, polycrystalline AlN thin films can be deposited at BEOL-compatible low temperatures (lower than 400 C) while retaining relatively high TC, rendering AlN a promising candidate for BEOL heat dissipation. Still, AlN deposition should aim at achieving high TC on a variety of substrates used in IC processes. In this work, we obtained 600- and 1200-nm BEOL-compatible AlN thin film samples on Si, SiO, SiN, and Al2O3 substrates for structural and thermal characterizations. Specifically, time-domain thermoreflectance (TDTR) measurements revealed consistently high TC (higher than 45 W m-1 K-1) on different substrates. Moreover, finite element analysis (FEA) simulations of AlN capped on top of an indium-tin-oxide (ITO) transistor showed a reduction of up to 44% in peak device temperature. Our work provided experimental and calculational evidence for the practicality of leveraging AlN as a high-TC, BEOL-compatible heat spreader material.

cond-mat.mtrl-sci↗