arXiv Science⌕ Search

arXiv subjects

Zhui Zhu

Publications and source records attributed to Zhui Zhu.

10 recordsLinked to original sources

ForgeSystem: An Architecture for Demand-Specific Artefact Production with AI Agents

General-purpose software serves many different demands, but this flexibility costs performance and efficiency on any specific demand. Software tailored to a specific demand avoids these losses, yet developing it requires substantial time and effort from human experts. AI agents offer an alternative: they can design, implement and test artefacts tailored to individual demands. We call this production paradigm Forge. Forging for a demand is economically justified when the cumulative benefit of specialisation exceeds the total cost of construction, verification and maintenance. To make Forge a repeatable production process, we propose ForgeSystem, which consists of a control layer, a forge loop and a recursive self-improvement (RSI) loop. The control layer selects which artefact serves each demand and decides which demands to forge, when to forge them and from which starting point; the forge loop iterates between production and verification until a candidate artefact passes verification; and the RSI loop draws on accumulated production records to supply starting points, refine the harness and train models. We implement ForgeSystem for training frameworks, decoding megakernels and individual computational kernels. Forged training engines reach 1.047-1.332x the model-FLOPs utilisation of their reference frameworks, forged megakernels achieve a geometric-mean decoding speedup of 1.21x over SGLang across thirteen configurations, and forged kernels match or exceed expert libraries in eighteen of twenty-two configurations, while satisfying task-specific quality requirements. Controlled comparisons show that explicit quality requirements steer agents towards optimisations that preserve training quality. We also discuss a gradual transition to Forge through service routing, and how demand-specific production may shift value accumulation and trust towards production systems.

cs.SE↗

ForgeKernel: Self-Evolving Kernels Catching and Surpassing Experts and Agents

Purpose-built kernel agents can write high-performance GPU kernels, but existing systems generally lack cross-run knowledge accumulation and architectural evolution. Each run starts from the same initial knowledge, and later iterations largely optimize within an architecture fixed early in the search. We present ForgeKernel, a kernel-generation system that accumulates and reuses knowledge across runs while enabling continued evolution of kernel architectures. It analyzes the hardware behavior of a high-performance reference and distills validated architectural decisions into reusable knowledge of hardware mechanisms rather than imitating source code. It then seals a kernel that passes correctness and performance validation and uses it as the reference for the next optimization run, enabling architectural decisions to be revisited. Across 27 operators and 29 input configurations on NVIDIA Hopper and Blackwell GPUs, ForgeKernel matches or beats its expert reference on 25 configurations, with a geometric-mean performance gain of 10%. On Ascend 910C, it outperforms the per-operator public best on the public case set of all 8 level-4 operators in the CANN-Bench Season 1 final leaderboard, with a geometric-mean gain of 25.1%, while its full-suite submission ranks first on the A3 leaderboard. As of 2026-10-30, public submissions generated by ForgeKernel rank first on all three CANN-Bench 2.0 solution leaderboards (Ascend 910C, 950DT, and 950PR) and on the SOL-ExecBench FlashInfer-Bench track.

cs.DC↗

JustGoal: With Only a Goal, the AI Baseline Is Above the Expert Kernels

A small number of GPU kernels often determines the efficiency of large language model training and inference. High-performance kernel development typically relies on expert knowledge through manual implementation, collaboration with general-purpose models, or specialized agents equipped with domain knowledge, evaluation methods, and search workflows. We investigate how much value this knowledge provides as foundation models become stronger. We introduce JustGoal, a goal-only baseline in which a general-purpose agent receives only the optimization objective and constraints, without kernel-specific infrastructure, knowledge bases, or predefined workflows, and builds its own evaluation loop. On NVIDIA B200 GPUs, JustGoal outperforms open-source libraries on 8 of 10 operators, achieving per-operator geometric mean speedups of 1.14x to 2.34x. It also surpasses the fastest publicly released specialized-agent kernel on 5 of 9 operators with available comparisons. In a controlled same-model comparison using Fable 5.1 on single shapes, the KDA-0.5 harness reaches 0.95x of JustGoal's performance, while single-mechanism ablations show no consistent benefit from domain knowledge or predefined workflows. These results indicate that specialized machinery should be justified by clear gains over a same-model, same-scope goal-only baseline and reevaluated whenever the foundation model changes.

cs.DC↗

AdaptInfer: Adaptive Token Pruning for Vision-Language Model Inference via Dynamical Text Guidance

Vision-language models (VLMs) have achieved impressive performance on multimodal inference tasks, but the cost remains a significant challenge due to the large number of vision tokens processed during the prefill stage. Existing token pruning methods often rely on utilizing the static attention patterns directly, failing to exploit the dynamic internal signals within VLMs. To address the issue, we propose AdaptInfer, a novel plug-and-play framework for vision token pruning. First, we introduce a dynamic text-guided pruning mechanism that construct soft priors over text-token importance on each pruning layer, allowing more informed scoring of vision tokens at each stage. Second, we observe a highly consistent distribution of cross-modal attention shifts by architecture, which inspires us to introduce a efficient data-driven schedule which determines the pruning locations automatically. Experimental results have verified the effectiveness and generalization of the proposed method. Under the same token budget, AdaptInfer surpasses existing approaches in accuracy. For instance, AdaptInfer maintains averagely 99.4% accuracy on Qwen2-VL while 70% of the prefilling vision token overhead is reduced. The source code is available on: https://github.com/weiczh02/AdaptInfer-base.

cs.CV↗

ForgeTrain: Forging Production-Grade Training Frameworks via Harness-Driven AI Development

Training large models still relies on general-purpose frameworks such as Megatron-LM, whose generality tax constrains scenario-specific optimization and adds runtime overhead through accumulated abstraction. AI code generation reduces the cost of building a framework, and makes it affordable to forge one per scenario. We propose Forge Engineering: building a dedicated implementation from scratch for each scenario and iteratively optimizing it toward peak performance under correctness and usability constraints. Dedicated implementations inherit no abstraction boundaries, so they can integrate optimizations across the stack and reach a higher performance ceiling. We instantiate this paradigm for training frameworks as ForgeTrain, which holds a trusted framework as a golden reference and relaxes equivalence monotonically from Bit-for-Bit to Surpass. Experiments across multiple model--hardware configurations show that ForgeTrain consistently produces correct training engines and improves MFU over established training frameworks by 4.7--33.2%. To our knowledge this is the first production-grade training framework forged end-to-end by AI to match or surpass its human reference.

cs.SE↗

ForgeMegakernel: A General Framework for Efficient Auto-Regressive Model Decode Megakernels

Auto-regressive model decode is bandwidth-bound, since every weight and key/value-cache byte crosses high-bandwidth memory once per token. A megakernel is an ideal solution, but existing automatic megakernel generation approaches cannot achieve both generalization across models and correctness guarantees. We present ForgeMegakernel, which generates a per-model high-performance decode megakernel using coding agents. ForgeMegakernel pairs a universal knowledge base of ten progressive milestones with an independent mid-state test oracle. The milestones provide the megakernel's structural properties: a fine-grained instruction stream for each SM, dependency counters replacing the global synchronization, and a shared-memory buffer pool for workload balance across SMs and greater parallelism. The test oracle derives the mid-states of the megakernel and checks the performance, error and precision during the generation process, guaranteeing a correct and trustworthy forged megakernel. We evaluated ForgeMegakernel on 14 representative decoding operations across eight model families spanning 0.6B-13B parameters. The generated megakernels achieved 50.5-85.9% MBU and geometric mean speedups of 1.21x over SGLang 0.5.18 and 1.54x over a megakernel compiler under identical configurations. Inside SGLang, evaluated on GSM8K with ragged prompts, all 14 megakernels decoded faster than the SGLang engine at comparable answer accuracy.

cs.DC↗

SynSeg: Feature Synergy for Multi-Category Contrastive Learning in End-to-End Open-Vocabulary Semantic Segmentation

Semantic segmentation in open-vocabulary scenarios presents significant challenges due to the wide range and granularity of semantic categories. Existing weakly-supervised methods often rely on category-specific supervision and ill-suited feature construction methods for contrastive learning, leading to semantic misalignment and poor performance. In this work, we introduce a novel weakly-supervised approach, SynSeg, to address the challenges. SynSeg performs Multi-Category Contrastive Learning (MCCL) as a stronger training signal which robustly injecting intra- and inter-category knowledge during training. We also propose a new feature reconstruction framework named Feature Synergy Structure (FSS). FSS reconstructs discriminative features for contrastive learning through prior fusion and semantic-activation-map enhancement, effectively avoiding the foreground bias introduced by the visual encoder. Furthermore, SynSeg is a lightweight end-to-end solution capable for real-time inference. In general, SynSeg effectively improves the abilities in semantic localization and discrimination under weak supervision in an efficient manner. Extensive experiments on benchmarks demonstrate that our method outperforms state-of-the-art (SOTA) performance, with mIoU score gains ranging from 0.6% up to 8.9% across all reported benchmarks.

cs.CV↗

SURGEON: Memory-Adaptive Fully Test-Time Adaptation via Dynamic Activation Sparsity

Despite the growing integration of deep models into mobile terminals, the accuracy of these models declines significantly due to various deployment interferences. Test-time adaptation (TTA) has emerged to improve the performance of deep models by adapting them to unlabeled target data online. Yet, the significant memory cost, particularly in resource-constrained terminals, impedes the effective deployment of most backward-propagation-based TTA methods. To tackle memory constraints, we introduce SURGEON, a method that substantially reduces memory cost while preserving comparable accuracy improvements during fully test-time adaptation (FTTA) without relying on specific network architectures or modifications to the original training procedure. Specifically, we propose a novel dynamic activation sparsity strategy that directly prunes activations at layer-specific dynamic ratios during adaptation, allowing for flexible control of learning ability and memory cost in a data-sensitive manner. Among this, two metrics, Gradient Importance and Layer Activation Memory, are considered to determine the layer-wise pruning ratios, reflecting accuracy contribution and memory efficiency, respectively. Experimentally, our method surpasses the baselines by not only reducing memory usage but also achieving superior accuracy, delivering SOTA performance across diverse datasets, architectures, and tasks.

cs.CV↗

Palantir: Towards Efficient Super Resolution for Ultra-high-definition Live Streaming

Neural enhancement through super-resolution (SR) deep neural networks (DNNs) opens up new possibilities for ultra-high-definition (UHD) live streaming over existing encoding and networking infrastructure. Yet, the heavy SR DNN inference overhead leads to severe deployment challenges. To reduce the overhead, existing systems propose to apply DNN-based SR only on carefully selected anchor frames while upscaling non-anchor frames via the lightweight reusing-based SR approach. However, frame-level scheduling is coarse-grained and fails to deliver optimal efficiency. In this work, we propose Palantir, the first neural-enhanced UHD live streaming system with fine-grained patch-level scheduling. Two novel techniques are incorporated into Palantir to select the most beneficial anchor patches and support latency-sensitive UHD live streaming applications. Firstly, under the guidance of our pioneering and theoretical analysis, Palantir constructs a directed acyclic graph (DAG) for lightweight yet accurate SR quality estimation under any possible anchor patch set. Secondly, to further optimize the scheduling latency, Palantir improves parallelizability by refactoring the computation subprocedure of the estimation process into a sparse matrix-matrix multiplication operation. The evaluation results suggest that Palantir incurs a negligible scheduling latency accounting for less than 5.7% of the end-to-end latency requirement. When compared to the naive method of applying DNN-based SR on all the frames, Palantir can reduce the SR DNN inference overhead by 20 times (or 60 times) while preserving 54.0-82.6% (or 32.8-64.0%) of the quality gain. When compared to the state-of-the-art real-time frame-level scheduling strategy, Palantir can reduce the SR DNN inference overhead by 80.1% at most (and 38.4% on average) without sacrificing the video quality.

cs.MM↗

Calculus of Consent via MARL: Legitimating the Collaborative Governance Supplying Public Goods

Public policies that supply public goods, especially those involve collaboration by limiting individual liberty, always give rise to controversies over governance legitimacy. Multi-Agent Reinforcement Learning (MARL) methods are appropriate for supporting the legitimacy of the public policies that supply public goods at the cost of individual interests. Among these policies, the inter-regional collaborative pandemic control is a prominent example, which has become much more important for an increasingly inter-connected world facing a global pandemic like COVID-19. Different patterns of collaborative strategies have been observed among different systems of regions, yet it lacks an analytical process to reason for the legitimacy of those strategies. In this paper, we use the inter-regional collaboration for pandemic control as an example to demonstrate the necessity of MARL in reasoning, and thereby legitimizing policies enforcing such inter-regional collaboration. Experimental results in an exemplary environment show that our MARL approach is able to demonstrate the effectiveness and necessity of restrictions on individual liberty for collaborative supply of public goods. Different optimal policies are learned by our MARL agents under different collaboration levels, which change in an interpretable pattern of collaboration that helps to balance the losses suffered by regions of different types, and consequently promotes the overall welfare. Meanwhile, policies learned with higher collaboration levels yield higher global rewards, which illustrates the benefit of, and thus provides a novel justification for the legitimacy of, promoting inter-regional collaboration. Therefore, our method shows the capability of MARL in computationally modeling and supporting the theory of calculus of consent, developed by Nobel Prize winner J. M. Buchanan.

cs.AI↗