arXiv subjects

Zhongpu Xia

Publications and source records attributed to Zhongpu Xia.

At least 19 recordsLinked to original sources

arXiv2026

Scale Anchoring via Implicit Semantics and Sequence-Consistent Loop Closure for VGGT-Based SLAM

Feed-forward geometric foundation models enable dense monocular reconstruction without requiring camera calibration, but independently reconstructed submaps can accumulate scale drift, and even a valid revisit can yield an inconsistent cross-submap measurement. We extend VGGT-SLAM 2.0 with fixed-root scale anchoring and short-sequence-assisted direct loop connections. SALAD selects an image pair between the initial submap and each eligible new submap; joint VGGT inference then uses learned implicit semantic-geometric cues to supply a scale-only anchor while preserving the original overlap chain. For loop closure, neighboring image pairs support a consistency check and translation-scale alignment. Each accepted candidate contributes one robust Sim(3) factor between existing center-frame nodes, without an auxiliary loop submap. A 17-sequence comparison lowers mean Sim(3) ATE on nine TUM sequences from 0.1018 to 0.0451 m relative to the VGGT-SLAM 2.0 baseline. Anchoring improves all seven no-loop module ablations. On three Clio scenes, a fixed-loop comparison favors the direct connection pipeline over the tested auxiliary-submap pipeline. A separate candidate audit exposes additional rejections of visually overlapping pairs by the short-sequence check. These comparisons distinguish the gains from long-range scale anchoring and loop connection choices from the limitations of candidate verification.

cs.RO↗

arXiv2026

Physical Canvas: A Vision Tactile World Model For Robot Policy Evaluation And Learning

Evaluating and post-training robot policies through physical interaction is costly and difficult to scale, motivating action-conditioned world models as interactive simulators. However, visually plausible predictions can misrepresent contact dynamics, providing unreliable feedback for policy evaluation and learning. We introduce PhysCanvas, a state-consistent visuo-tactile world model for contact-rich robot manipulation. PhysCanvas unifies multi-view RGB, tactile images, marker displacement, task state, and actions within a unified vision space. All modalities share a video VAE and pretrained generative backbone, allowing optical touch to reuse visual and temporal priors. Motion images derived through forward kinematics and camera projection provide spatially aligned action conditioning, while an initial RGB anchor and updated reference observations guide sequential generation. Our consistency-aware post-training uses the frozen Scene Reward Model, Modality Reward Model, and State Reward Model to supervise scene preservation, visual-tactile compatibility, and agreement with real task outcomes. The resulting world model supports closed-loop policy rollouts for evaluation and provides imagined interactions and rewards for GRPO policy updates. Across four real-world manipulation tasks, when policies are rolled out in the world model, State Reward Model supervision increases the arithmetic mean of task-wise Pearson correlations between world-model and real-world success rates from 0.602 to 0.885. Policy post-training in the reward-guided world model further increases $π_{0.5}$'s mean real-world success rate from a 59.1% SFT baseline to 70.8%. These results demonstrate the value of unified multimodal modeling and consistency-aware post-training for robot policy evaluation and learning. Project page: https://zebinx.github.io/PhysCanvas_HomePage/.

cs.RO↗

arXiv2026

Interaction Latents as Actions for Contact-Rich Manipulation

Contact-rich manipulation requires robots to coordinate not only where to move, but also how contact and force should evolve throughout an interaction. Yet most robot policies represent actions primarily as motion trajectories, using tactile signals as inputs or auxiliary prediction targets without explicitly encoding contact dynamics in the action representation. We propose ILA (Interaction Latents as Actions), which uses decodable interaction latents that jointly capture the evolution of motion, contact, and force application as policy action units, providing a shared representation for action generation, evaluation, and offline improvement. We learn these latents through visually conditioned joint action-tactile reconstruction with a time-conditioned implicit decoder. Using them as flow-matching generation targets supports post-training of pretrained vision-language-action models (VLAs) and world action models (WAMs), as well as training flow-matching policies from scratch. A shared decoder maps generated latents to executable actions. For offline improvement, we learn a tactile-conditioned expert reference model from interaction latents encoded from expert demonstrations. The resulting expert-consistency rewards guide weighted learning from successful rollouts, while observation-compatible expert references guide correction of low-reward predictions from failed rollouts. Across three policy families, ILA improves success rates averaged over four real-world tasks by 21.0-36.5 percentage points relative to tactile-conditioned direct-action baselines. Ablations highlight the benefit of encoding contact evolution in action targets beyond tactile conditioning, while the same latent space supports expert-guided offline improvement. Project website: https://mrsecant.github.io/ILA/.

cs.RO↗

arXiv2026

WoVR+: World Model as Reliable Simulator for Versatile VLA Policy Optimization with RL

Action-conditioned world models can reduce costly real-robot interaction in reinforcement learning for Vision-Language-Action models (VLA-RL), but hallucinations can mislead policy optimization. Extending them to richer VLA interfaces and long-horizon tasks raises challenges in spatiotemporal and cross-modal consistency, exploration-reliability balance in RL, and compounding rollout errors. We present WoVR+, extending WoVR's hallucination-aware WM-RL framework by redesigning the learned environment and imagined interaction protocol: A VLA-interface-aligned world model provides multi-view prediction and proprioceptive updates while mitigating hallucinations. Chunk-wise noise preserves flow-based policy exploration while limiting prediction-degrading action jitter. For long-horizon tasks, stage-local imagined training combines stage-entry resets, stage-specific rewards, local horizons, and controllable sampling to shorten generated prefixes and balance training across stages. WoVR+ improves success over SFT by 21.09% and 16.7% on RoboTwin and 6 real-robot tasks. Long-horizon phone-packaging success rises from 30% to 75%. Videos are available at https://youmo445.github.io/WoVR_Plus.github.io/.

cs.RO↗

arXiv2026

InCoM: Intent-Driven Perception and Structured Coordination for Mobile Manipulation

Mobile manipulation is a fundamental capability for general-purpose robotic agents, requiring both coordinated control of the mobile base and manipulator and robust perception under dynamically changing viewpoints. However, existing approaches face two key challenges: strong coupling between base and arm actions complicates control optimization, and perceptual attention is often poorly allocated as viewpoints shift during mobile manipulation. We propose InCoM, an intent-driven perception and structured coordination framework for mobile manipulation. InCoM infers latent motion intent to dynamically reweight multi-scale perceptual features, enabling stage-adaptive allocation of perceptual attention. To support robust cross-modal perception, InCoM further incorporates a geometric-semantic affinity refinement mechanism that enhances multimodal correspondence. On the control side, we design a decoupled coordinated flow matching action decoder that explicitly models bidirectional base-arm interactions, alleviating optimization difficulties caused by control coupling. Under matched non-privileged observations and task-specific training data, InCoM improves mean success over DSPv2 by 33.0, 26.1, and 23.6 percentage points on SetTable, TidyHouse, and PrepareGroceries, respectively. Furthermore, its effectiveness is consistently validated in real-world mobile manipulation tasks, where InCoM maintains a superior success rate over existing baselines.

cs.RO↗

arXiv2026

WALA Learning Executable Latent Actions from Action-Labeled Demonstrations and Action-Free Videos

Human videos provide rich information about object manipulation at a scale difficult to reproduce with robots, but often lack action annotations that can directly supervise robot policies. Realizing this potential requires distinguishing interaction-relevant changes from static appearance and connecting the learned interaction knowledge to executable robot actions. We present WALA, a framework named for World- and Action-supervised Latent Actions. Its semantic-geometric latent action model (LAM) learns latent actions by encoding and predicting semantic and geometric changes, emphasizing interactions over static appearance while retaining spatial detail. During robot policy training, the LAM encoder and decoder provide guidance through distillation and visual prediction, respectively. Together with robot action supervision, these signals shape policy-generated latent actions to support world prediction and capture the information needed to directly generate executable robot actions. Because LAM supervision requires no action labels, WALA enables co-training on action-labeled robot demonstrations and task-relevant action-free videos. In simulation experiments, our method achieves 92.33% average success on RoboTwin and 75.2% on RoboCasa-GR1-Tabletop, exceeding the previous state of the art on RoboCasa by 5.0 percentage points. WALA also shows strong real-robot performance, further enhanced by task-relevant action-free human videos that improve data efficiency and support target-task zero-shot and few-shot transfer.

cs.RO↗

arXiv2026

MonoEgo: Monocular Metric Egocentric Demonstration Capture with Passive Wrist Constellations and Sparse Workstation Anchors

Image-aligned metric demonstrations often require dedicated tracking hardware and synchronization across devices. We present MonoEgo, a capture system that replaces active wrist instrumentation with offline monocular reconstruction. One 90-FPS global-shutter camera observes calibrated passive wrist constellations, sparse workstation anchors, and the scene on a shared image clock. MonoTag SLAM combines marker corners with ORB geometry and uses visual evidence to reject ambiguous planar-marker poses. Its metric Atlas supports interval scale re-anchoring, verified map merging, and retrospective localization of earlier frames supported by the final map. Camera and wrist-constellation outputs retain validity and map provenance, and unsupported motion is left missing. Experiments show metric tracking beyond continuous anchor visibility, reconnection of supported map components, and recovery of some missing camera poses. Comparisons against a multisensor camera reference and separate stationary-constellation tests characterize trajectory agreement and precision while revealing incomplete coverage and residual geometric uncertainty. The results indicate that passive fixtures and offline reconstruction can reduce capture-side requirements. Dynamic accuracy, deployment, and downstream policy benefits require further study.

cs.RO↗

arXiv2026

UpDown-SC: Gravity-Canonicalized Dual-Envelope Scan Context for Indoor LiDAR Place Recognition

LiDAR place recognition is a key front end for loop closure and global relocalization, yet indoor retrieval remains difficult when attitude or sensor mounting height changes between mapping and query sessions. Scan Context stores the maximum height in each polar cell; indoors, broad ceilings can suppress the lower and mid-level geometry that distinguishes adjacent rooms and corridors. We present UpDown-SC, a training-free polar descriptor that first canonicalizes gravity and then represents two complementary surfaces: the upper envelope of lower/middle structures and the lower envelope of overhead structures. Their physical split is estimated once from a cell-balanced map height distribution and reused by every query. A mask-aware, non-uniform two-channel distance retains discriminative lower-level evidence while limiting sensitivity to its cross-session variation, without treating unobserved cells as zero-height measurements. Conventional Scan Context shortlisting and circular yaw alignment are retained, so retrieved hypotheses directly initialize geometric verification. Experiments across repeated indoor sessions, mounting-height changes, mixed outdoor-to-indoor trajectories, and an outdoor transfer sequence show more reliable first-choice retrieval on the indoor and mounting-height-varied sessions. A paired test finds a significant gain over Scan Context on the in-house sessions. UpDown-SC also gives the best or second-best F1max and AUPR under threshold-based acceptance while retaining a lightweight CPU front end. Continuous replay confirms that the retrieved hypotheses support metric prior-map localization. Code and evaluation artifacts: https://github.com/jiejie567/updown-sc.

cs.CV↗

arXiv2026

Does Online Gravity Estimation Matter? Revisiting a Silent Design Split in LiDAR-Inertial Odometry

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within $\pm 2\%$. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

cs.RO↗

arXiv2026

JEPA Policy: Diffusion-Free Imitation Learning via Paired Action and Future Representation Prediction

Standard behavior cloning supervises actions without explicitly constraining the future representation paired with each demonstrated action chunk. We introduce JEPA Policy, a diffusion-free framework that uses the action chunk and its observed future representation as paired training targets. Action and future-representation tokens interact in a shared Transformer and are refined through two forward passes. Future prediction can therefore shape the representation used to generate actions. Dual-branch and gradient-routing controls attribute the gain to this shared topology rather than to an auxiliary prediction head alone. Across nine simulated tasks, JEPA Policy improves mean success over the action-only MIP baseline and outperforms Diffusion Policy under the evaluated configurations, while adding 0.29 ms to MIP's model latency. A five-task, 630-episode physical-robot study produces the same pooled ranking. Further audits find no complete representation collapse under action supervision and identify a task-conditioned failure-ranking signal in future-prediction error. These results support paired future-representation supervision as a practical approach to low-latency visuomotor imitation without iterative generative sampling.

cs.RO↗

arXiv2026

GIFT: Guided Intermediate Feature Training via Action-Oriented Structural Supervision for Robotic Manipulation

Vision-language pre-training and predictive world modeling provide robot policies with rich semantic and dynamic visual features, but their native action and visual-prediction objectives may omit critical physical and task structure while retaining control-irrelevant visual redundancy. We call this mismatch between visual richness and control utility the action-sufficiency gap. We investigate whether this gap can be bridged by guiding intermediate features to preserve three control-relevant structure in robotic manipulation: geometry governing motion feasibility, affordance encoding instruction-relevant entities, and goals grounding instructions in task-relevant regions. To this end, we present GIFT (Guided Intermediate Feature Training), an architecture-flexible framework for learning intermediate features that translates these structures into training-time constraints through geometry alignment, affordance prediction, and goal-region reconstruction. We instantiate GIFT in a Vision-Language-Action (VLA) policy, a direct-action World-Action Model (WAM), and an inverse-dynamics WAM while retaining each model's action formulation. Under zero-shot transfer to LIBERO-Plus, GIFT-VLA, GIFT-WAM-Fast, and GIFT-WAM-IDM outperform StarVLA-OFT, Fast-WAM, and Fast-WAM-IDM by 4.6, 12.6, and 5.2 points, reaching 79.6%, 72.6%, and 87.8%, respectively. On RoboCasa, the three GIFT variants reach 61.4%, 83.6%, and 82.3%, outperforming their counterparts by 12.6, 9.0, and 8.4 points, respectively. Together, these results establish learning functionally structured intermediate features as a reusable principle across model-specific action formulations, with especially large gains on articulated-object tasks and high-precision real-world manipulation under unseen visual and spatial perturbations. Project page: https://openphoenix-team.github.io/GIFT-pages.

cs.RO↗

arXiv2026

DreamerAD: Efficient Reinforcement Learning via Latent World Model for Autonomous Driving

We introduce DreamerAD, the first latent world model framework that enables efficient reinforcement learning for autonomous driving by compressing diffusion sampling from 100 steps to 1 - achieving 80x speedup while maintaining visual interpretability. Training RL policies on real-world driving data incurs prohibitive costs and safety risks. While existing pixel-level diffusion world models enable safe imagination-based training, they suffer from multi-step diffusion inference latency (2s/frame) that prevents high-frequency RL interaction. Our approach leverages denoised latent features from video generation models through three key mechanisms: (1) shortcut forcing that reduces sampling complexity via recursive multi-resolution step compression, (2) an autoregressive dense reward model operating directly on latent representations for fine-grained credit assignment, and (3) Gaussian vocabulary sampling for GRPO that constrains exploration to physically plausible trajectories. DreamerAD achieves 87.7 EPDMS on NavSim v2, establishing state-of-the-art performance and demonstrating that latent-space RL is effective for autonomous driving.

cs.LG↗

arXiv2026

MeanFuser: Fast One-Step Multi-Modal Trajectory Generation and Adaptive Reconstruction via MeanFlow for End-to-End Autonomous Driving

Generative models have shown great potential in trajectory planning. Recent studies demonstrate that anchor-guided generative models are effective in modeling the uncertainty of driving behaviors and improving overall performance. However, these methods rely on discrete anchor vocabularies that must sufficiently cover the trajectory distribution during testing to ensure robustness, inducing an inherent trade-off between vocabulary size and model performance. To overcome this limitation, we propose MeanFuser, an end-to-end autonomous driving method that enhances both efficiency and robustness through three key designs. (1) We introduce Gaussian Mixture Noise (GMN) to guide generative sampling, enabling a continuous representation of the trajectory space and eliminating the dependency on discrete anchor vocabularies. (2) We adapt ``MeanFlow Identity" to end-to-end planning, which models the mean velocity field between GMN and trajectory distribution instead of the instantaneous velocity field used in vanilla flow matching methods, effectively eliminating numerical errors from ODE solvers and significantly accelerating inference. (3) We design a lightweight Adaptive Reconstruction Module (ARM) that enables the model to implicitly select from all sampled proposals or reconstruct a new trajectory when none is satisfactory via attention weights.Experiments on the NAVSIM closed-loop benchmark demonstrate that MeanFuser achieves outstanding performance without the supervision of the PDM Score and exceptional inference efficiency, offering a robust and efficient solution for end-to-end autonomous driving. Our code and model are available at https://github.com/wjl2244/MeanFuser.

cs.CV↗

arXiv2026

Learning Rollout from Sampling:An R1-Style Tokenized Traffic Simulation Model

Learning diverse and high-fidelity traffic simulations from human driving demonstrations is crucial for autonomous driving evaluation. The recent next-token prediction (NTP) paradigm, widely adopted in large language models (LLMs), has been applied to traffic simulation and achieves iterative improvements via supervised fine-tuning (SFT). However, such methods limit active exploration of potentially valuable motion tokens, particularly in suboptimal regions. Entropy patterns provide a promising perspective for enabling exploration driven by motion token uncertainty. Motivated by this insight, we propose a novel tokenized traffic simulation policy, R1Sim, which represents an initial attempt to explore reinforcement learning based on motion token entropy patterns, and systematically analyzes the impact of different motion tokens on simulation outcomes. Specifically, we introduce an entropy-guided adaptive sampling mechanism that focuses on previously overlooked motion tokens with high uncertainty yet high potential. We further optimize motion behaviors using Group Relative Policy Optimization (GRPO), guided by a safety-aware reward design. Overall, these components enable a balanced exploration-exploitation trade-off through diverse high-uncertainty sampling and group-wise comparative estimation, resulting in realistic, safe, and diverse multi-agent behaviors. Extensive experiments on the Waymo Sim Agent benchmark demonstrate that R1Sim achieves competitive performance compared to state-of-the-art methods.

cs.RO↗

arXiv2026

PerlAD: Towards Enhanced Closed-loop End-to-end Autonomous Driving with Pseudo-simulation-based Reinforcement Learning

End-to-end autonomous driving policies based on Imitation Learning (IL) often struggle in closed-loop execution due to the misalignment between inadequate open-loop training objectives and real driving requirements. While Reinforcement Learning (RL) offers a solution by directly optimizing driving goals via reward signals, the rendering-based training environments introduce the rendering gap and are inefficient due to high computational costs. To overcome these challenges, we present a novel Pseudo-simulation-based RL method for closed-loop end-to-end autonomous driving, PerlAD. Based on offline datasets, PerlAD constructs a pseudo-simulation that operates in vector space, enabling efficient, rendering-free trial-and-error training. To bridge the gap between static datasets and dynamic closed-loop environments, PerlAD introduces a prediction world model that generates reactive agent trajectories conditioned on the ego vehicle's plan. Furthermore, to facilitate efficient planning, PerlAD utilizes a hierarchical decoupled planner that combines IL for lateral path generation and RL for longitudinal speed optimization. Comprehensive experimental results demonstrate that PerlAD achieves state-of-the-art performance on the Bench2Drive benchmark, surpassing the previous E2E RL method by 10.29% in Driving Score without requiring expensive online interactions. Additional evaluations on the DOS benchmark further confirm its reliability in handling safety-critical occlusion scenarios.

cs.RO↗

arXiv2025

TakeAD: Preference-based Post-optimization for End-to-end Autonomous Driving with Expert Takeover Data

Existing end-to-end autonomous driving methods typically rely on imitation learning (IL) but face a key challenge: the misalignment between open-loop training and closed-loop deployment. This misalignment often triggers driver-initiated takeovers and system disengagements during closed-loop execution. How to leverage those expert takeover data from disengagement scenarios and effectively expand the IL policy's capability presents a valuable yet unexplored challenge. In this paper, we propose TakeAD, a novel preference-based post-optimization framework that fine-tunes the pre-trained IL policy with this disengagement data to enhance the closed-loop driving performance. First, we design an efficient expert takeover data collection pipeline inspired by human takeover mechanisms in real-world autonomous driving systems. Then, this post optimization framework integrates iterative Dataset Aggregation (DAgger) for imitation learning with Direct Preference Optimization (DPO) for preference alignment. The DAgger stage equips the policy with fundamental capabilities to handle disengagement states through direct imitation of expert interventions. Subsequently, the DPO stage refines the policy's behavior to better align with expert preferences in disengagement scenarios. Through multiple iterations, the policy progressively learns recovery strategies for disengagement states, thereby mitigating the open-loop gap. Experiments on the closed-loop Bench2Drive benchmark demonstrate our method's effectiveness compared with pure IL methods, with comprehensive ablations confirming the contribution of each component.

cs.RO↗

arXiv2025

WorldRFT: Latent World Model Planning with Reinforcement Fine-Tuning for Autonomous Driving

Latent World Models enhance scene representation through temporal self-supervised learning, presenting a perception annotation-free paradigm for end-to-end autonomous driving. However, the reconstruction-oriented representation learning tangles perception with planning tasks, leading to suboptimal optimization for planning. To address this challenge, we propose WorldRFT, a planning-oriented latent world model framework that aligns scene representation learning with planning via a hierarchical planning decomposition and local-aware interactive refinement mechanism, augmented by reinforcement learning fine-tuning (RFT) to enhance safety-critical policy performance. Specifically, WorldRFT integrates a vision-geometry foundation model to improve 3D spatial awareness, employs hierarchical planning task decomposition to guide representation optimization, and utilizes local-aware iterative refinement to derive a planning-oriented driving policy. Furthermore, we introduce Group Relative Policy Optimization (GRPO), which applies trajectory Gaussianization and collision-aware rewards to fine-tune the driving policy, yielding systematic improvements in safety. WorldRFT achieves state-of-the-art (SOTA) performance on both open-loop nuScenes and closed-loop NavSim benchmarks. On nuScenes, it reduces collision rates by 83% (0.30% -> 0.05%). On NavSim, using camera-only sensors input, it attains competitive performance with the LiDAR-based SOTA method DiffusionDrive (87.8 vs. 88.1 PDMS).

cs.RO↗

arXiv2025

TrajMoE: Scene-Adaptive Trajectory Planning with Mixture of Experts and Reinforcement Learning

Current autonomous driving systems often favor end-to-end frameworks, which take sensor inputs like images and learn to map them into trajectory space via neural networks. Previous work has demonstrated that models can achieve better planning performance when provided with a prior distribution of possible trajectories. However, these approaches often overlook two critical aspects: 1) The appropriate trajectory prior can vary significantly across different driving scenarios. 2) Their trajectory evaluation mechanism lacks policy-driven refinement, remaining constrained by the limitations of one-stage supervised training. To address these issues, we explore improvements in two key areas. For problem 1, we employ MoE to apply different trajectory priors tailored to different scenarios. For problem 2, we utilize Reinforcement Learning to fine-tune the trajectory scoring mechanism. Additionally, we integrate models with different perception backbones to enhance perceptual features. Our integrated model achieved a score of 51.08 on the navsim ICCV benchmark, securing third place.

cs.CV↗