arXiv Science⌕ Search

arXiv subjects

Zhiyao Xie

Publications and source records attributed to Zhiyao Xie.

At least 37 records · Page 2Linked to original sources

ICP: Exploiting Instruction Correlation for Prefetching Irregular Memory Accesses

Irregular memory accesses pose challenges for effective and efficient data prefetching. While temporal prefetchers have recently shown promise for irregular memory access patterns, their effectiveness fundamentally depends on temporal address recurrence and large metadata storage. When memory addresses exhibit weak or no recurrence, as in indirect memory accesses, temporal prefetchers achieve limited performance gains while incurring substantial storage overhead. This paper proposes Instruction-Correlation Prefetching (ICP), a new hardware prefetching mechanism that exploits instruction-level correlations rather than memory-address correlations to handle irregular memory accesses. ICP observes that although memory addresses may not repeat, the instructions generating them often recur with stable data-dependency relationships. By learning these persistent instruction correlations, ICP speculatively computes and prefetches future irregular accesses using the execution results of their correlated predecessors. Across irregular SPEC CPU and GAP benchmarks, ICP outperforms the state-of-the-art temporal prefetcher Triangel by 14.0% and the indirect prefetcher DMP by 6.0%, while requiring only 2.1 KB of hardware storage, over three orders of magnitude smaller than temporal prefetchers.

cs.AR↗

Accelerating MoE with Dynamic In-Switch Computing on Multi-GPUs

Mixture-of-Experts (MoE) has been adopted by many leading large models to reduce computational requirements. However, frequent inter-GPU communication in MoE expert parallelism (EP) becomes a performance challenge. We observe substantial redundant inter-GPU data transfers in MoE that can be potentially addressed by in-switch computing. Unfortunately, the existing solution, NVLink SHARP (NVLS), can only support static collectives with regular patterns, incapable of dynamic communication with irregular patterns in MoE. To bridge the functionality gap, we propose DySHARP, an integral dynamic in-switch computing solution to accelerate MoE, encompassing both communication primitives and communication-aware scheduling: 1) Dynamic multimem addressing co-designs ISA, architecture, and runtime, as a dynamic extension to NVLS, reducing redundant traffic. However, the resulting traffic reduction is inherently asymmetric between two directions, preventing it from directly translating into speedup. 2) Token-centric kernel fusion deeply fuses the dispatch-computation-combine pipeline, resolving this asymmetry to translate traffic reduction into actual speedup. Compared with the state-of-the-art solution, DySHARP achieves up to 1.79$\times$ speedup.

cs.AR↗

Dr. RTL: Autonomous Agentic RTL Optimization through Tool-Grounded Self-Improvement

Recent advances in large language models (LLMs) have sparked growing interest in automatic RTL optimization for better performance, power, and area (PPA). However, existing methods are still far from realistic RTL optimization. Their evaluation settings are often unrealistic: they are tested on manually degraded, small-scale RTL designs and rely on weak open-source tools. Their optimization methods are also limited, relying on coarse design-level feedback and simple pre-defined rewriting rules. To address these limitations, we present Dr. RTL, an agentic framework for RTL timing optimization in a realistic evaluation environment, with continual self-improvement through reusable optimization skills. We establish a realistic evaluation setting with more challenging RTL designs and an industrial EDA workflow. Within this setting, Dr. RTL performs closed-loop optimization through a multi-agent framework for critical-path analysis, parallel RTL rewriting, and tool-based evaluation. We further introduce group-relative skill learning, which compares parallel RTL rewrites and distills the optimization experience into an interpretable skill library. Currently, this library contains 47 pattern--strategy entries for cross-design reuse to improve PPA and accelerate convergence, and it can continue evolving over time. Evaluated on 20 real-world RTL designs, Dr. RTL achieves average WNS/TNS improvements of 21%/17% with a 6% area reduction over the industry-leading commercial synthesis tool.

cs.AI↗

AssertLLM: Generating and Evaluating Hardware Verification Assertions from Design Specifications via Multi-LLMs

Assertion-based verification (ABV) is a critical method for ensuring design circuits comply with their architectural specifications, which are typically described in natural language. This process often requires human interpretation by verification engineers to convert these specifications into functional verification assertions. Existing methods for generating assertions from natural language specifications are limited to sentences extracted by engineers, discouraging its practical application. In this work, we present AssertLLM, an automatic assertion generation framework that processes complete specification files. AssertLLM breaks down the complex task into three phases, incorporating three customized Large Language Models (LLMs) for extracting structural specifications, mapping signal definitions, and generating assertions. Our evaluation of AssertLLM on a full design, encompassing 23 I/O signals, demonstrates that 89\% of the generated assertions are both syntactically and functionally accurate.

cs.AR↗

A New Benchmark for the Appropriate Evaluation of RTL Code Optimization

The rapid progress of artificial intelligence increasingly relies on efficient integrated circuit (IC) design. Recent studies have explored the use of large language models (LLMs) for generating Register Transfer Level (RTL) code, but existing benchmarks mainly evaluate syntactic correctness rather than optimization quality in terms of power, performance, and area (PPA). This work introduces RTL-OPT, a benchmark for assessing the capability of LLMs in RTL optimization. RTL-OPT contains 36 handcrafted digital designs that cover diverse implementation categories including combinational logic, pipelined datapaths, finite state machines, and memory interfaces. Each task provides a pair of RTL codes, a suboptimal version and a human-optimized reference that reflects industry-proven optimization patterns not captured by conventional synthesis tools. Furthermore, RTL-OPT integrates an automated evaluation framework to verify functional correctness and quantify PPA improvements, enabling standardized and meaningful assessment of generative models for hardware design optimization.

cs.AI↗

ReadyPower: A Reliable, Interpretable, and Handy Architectural Power Model Based on Analytical Framework

Power is a primary objective in modern processor design, requiring accurate yet efficient power modeling techniques. Architecture-level power models are necessary for early power optimization and design space exploration. However, classical analytical architecture-level power models (e.g., McPAT) suffer from significant inaccuracies. Emerging machine learning (ML)-based power models, despite their superior accuracy in research papers, are not widely adopted in the industry. In this work, we point out three inherent limitations of ML-based power models: unreliability, limited interpretability, and difficulty in usage. This work proposes a new analytical power modeling framework named ReadyPower, which is ready-for-use by being reliable, interpretable, and handy. We observe that the root cause of the low accuracy of classical analytical power models is the discrepancies between the real processor implementation and the processor's analytical model. To bridge the discrepancies, we introduce architecture-level, implementation-level, and technology-level parameters into the widely adopted McPAT analytical model to build ReadyPower. The parameters at three different levels are decided in different ways. In our experiment, averaged across different training scenarios, ReadyPower achieves >20% lower mean absolute percentage error (MAPE) and >0.2 higher correlation coefficient R compared with the ML-based baselines, on both BOOM and XiangShan CPU architectures.baselines, on both BOOM and XiangShan CPU architectures.

cs.AR↗

DAPO: Design Structure-Aware Pass Ordering in High-Level Synthesis with Graph Contrastive and Reinforcement Learning

High-Level Synthesis (HLS) tools are widely adopted in FPGA-based domain-specific accelerator design. However, existing tools rely on fixed optimization strategies inherited from software compilations, limiting their effectiveness. Tailoring optimization strategies to specific designs requires deep semantic understanding, accurate hardware metric estimation, and advanced search algorithms -- capabilities that current approaches lack. We propose DAPO, a design structure-aware pass ordering framework that extracts program semantics from control and data flow graphs, employs contrastive learning to generate rich embeddings, and leverages an analytical model for accurate hardware metric estimation. These components jointly guide a reinforcement learning agent to discover design-specific optimization strategies. Evaluations on classic HLS designs demonstrate that our end-to-end flow delivers a 2.36 speedup over Vitis HLS on average.

cs.LG↗

ArchPower: Dataset for Architecture-Level Power Modeling of Modern CPU Design

Power is the primary design objective of large-scale integrated circuits (ICs), especially for complex modern processors (i.e., CPUs). Accurate CPU power evaluation requires designers to go through the whole time-consuming IC implementation process, easily taking months. At the early design stage (e.g., architecture-level), classical power models are notoriously inaccurate. Recently, ML-based architecture-level power models have been proposed to boost accuracy, but the data availability is a severe challenge. Currently, there is no open-source dataset for this important ML application. A typical dataset generation process involves correct CPU design implementation and repetitive execution of power simulation flows, requiring significant design expertise, engineering effort, and execution time. Even private in-house datasets often fail to reflect realistic CPU design scenarios. In this work, we propose ArchPower, the first open-source dataset for architecture-level processor power modeling. We go through complex and realistic design flows to collect the CPU architectural information as features and the ground-truth simulated power as labels. Our dataset includes 200 CPU data samples, collected from 25 different CPU configurations when executing 8 different workloads. There are more than 100 architectural features in each data sample, including both hardware and event parameters. The label of each sample provides fine-grained power information, including the total design power and the power for each of the 11 components. Each power value is further decomposed into four fine-grained power groups: combinational logic power, sequential logic power, memory power, and clock power. ArchPower is available at https://github.com/hkust-zhiyao/ArchPower.

cs.AR↗

SynCircuit: Automated Generation of New Synthetic RTL Circuits Can Enable Big Data in Circuits

In recent years, AI-assisted IC design methods have demonstrated great potential, but the availability of circuit design data is extremely limited, especially in the public domain. The lack of circuit data has become the primary bottleneck in developing AI-assisted IC design methods. In this work, we make the first attempt, SynCircuit, to generate new synthetic circuits with valid functionalities in the HDL format. SynCircuit automatically generates synthetic data using a framework with three innovative steps: 1) We propose a customized diffusion-based generative model to resolve the Directed Cyclic Graph (DCG) generation task, which has not been well explored in the AI community. 2) To ensure our circuit is valid, we enforce the circuit constraints by refining the initial graph generation outputs. 3) The Monte Carlo tree search (MCTS) method further optimizes the logic redundancy in the generated graph. Experimental results demonstrate that our proposed SynCircuit can generate more realistic synthetic circuits and enhance ML model performance in downstream circuit design tasks.

cs.LG↗

AutoPower: Automated Few-Shot Architecture-Level Power Modeling by Power Group Decoupling

Power efficiency is a critical design objective in modern CPU design. Architects need a fast yet accurate architecture-level power evaluation tool to perform early-stage power estimation. However, traditional analytical architecture-level power models are inaccurate. The recently proposed machine learning (ML)-based architecture-level power model requires sufficient data from known configurations for training, making it unrealistic. In this work, we propose AutoPower targeting fully automated architecture-level power modeling with limited known design configurations. We have two key observations: (1) The clock and SRAM dominate the power consumption of the processor, and (2) The clock and SRAM power correlate with structural information available at the architecture level. Based on these two observations, we propose the power group decoupling in AutoPower. First, AutoPower decouples across power groups to build individual power models for each group. Second, AutoPower designs power models by further decoupling the model into multiple sub-models within each power group. In our experiments, AutoPower can achieve a low mean absolute percentage error (MAPE) of 4.36\% and a high $R^2$ of 0.96 even with only two known configurations for training. This is 5\% lower in MAPE and 0.09 higher in $R^2$ compared with McPAT-Calib, the representative ML-based power model.

cs.AR↗

ATLAS: A Self-Supervised and Cross-Stage Netlist Power Model for Fine-Grained Time-Based Layout Power Analysis

Accurate power prediction in VLSI design is crucial for effective power optimization, especially as designs get transformed from gate-level netlist to layout stages. However, traditional accurate power simulation requires time-consuming back-end processing and simulation steps, which significantly impede design optimization. To address this, we propose ATLAS, which can predict the ultimate time-based layout power for any new design in the gate-level netlist. To the best of our knowledge, ATLAS is the first work that supports both time-based power simulation and general cross-design power modeling. It achieves such general time-based power modeling by proposing a new pre-training and fine-tuning paradigm customized for circuit power. Targeting golden per-cycle layout power from commercial tools, our ATLAS achieves the mean absolute percentage error (MAPE) of only 0.58%, 0.45%, and 5.12% for the clock tree, register, and combinational power groups, respectively, without any layout information. Overall, the MAPE for the total power of the entire design is <1%, and the inference speed of a workload is significantly faster than the standard flow of commercial tools.

cs.AR↗

ELF: Efficient Logic Synthesis by Pruning Redundancy in Refactoring

In electronic design automation, logic optimization operators play a crucial role in minimizing the gate count of logic circuits. However, their computation demands are high. Operators such as refactor conventionally form iterative cuts for each node, striving for a more compact representation - a task which often fails 98% on average. Prior research has sought to mitigate computational cost through parallelization. In contrast, our approach leverages a classifier to prune unsuccessful cuts preemptively, thus eliminating unnecessary resynthesis operations. Experiments on the refactor operator using the EPFL benchmark suite and 10 large industrial designs demonstrate that this technique can speedup logic optimization by 3.9x on average compared with the state-of-the-art ABC implementation.

cs.LG↗

GenEDA: Towards Generative Netlist Functional Reasoning via Cross-Modal Circuit Encoder-Decoder Alignment

The success of foundation AI has motivated the research of circuit foundation models, which are customized to assist the integrated circuit (IC) design process. However, existing pre-trained circuit foundation models are typically limited to standalone encoders for predictive tasks or decoders for generative tasks. These two model types are developed independently, operate on different circuit modalities, and reside in separate latent spaces. This restricts their ability to complement each other for more advanced capabilities. In this work, we present GenEDA, the first framework that cross-modally aligns circuit encoders with decoders within a shared latent space. GenEDA bridges the gap between graph-based circuit representation learning and text-based large language models (LLMs), enabling communication between their respective latent spaces. To achieve the alignment, we propose two paradigms to support both open-source trainable LLMs and commercial frozen LLMs. We leverage this aligned architecture to develop the first generative foundation model for netlists, unleashing LLMs' generative reasoning capability on the low-level and bit-blasted netlists. GenEDA enables three unprecedented generative netlist functional reasoning tasks, where it reversely generates high-level functionalities such as specifications and RTL code from low-level netlists. These tasks move beyond traditional gate function classification to direct generation of full-circuit functionality. Experiments demonstrate that GenEDA significantly boosts advanced LLMs' (e.g., GPT and DeepSeek series) performance in all tasks.

cs.LG↗

RTLCoder: Outperforming GPT-3.5 in Design RTL Generation with Our Open-Source Dataset and Lightweight Solution

The automatic generation of RTL code (e.g., Verilog) using natural language instructions and large language models (LLMs) has attracted significant research interest recently. However, most existing approaches heavily rely on commercial LLMs such as ChatGPT, while open-source LLMs tailored for this specific design generation task exhibit notably inferior performance. The absence of high-quality open-source solutions restricts the flexibility and data privacy of this emerging technique. In this study, we present a new customized LLM solution with a modest parameter count of only 7B, achieving better performance than GPT-3.5 on all representative benchmarks for RTL code generation. Especially, it outperforms GPT-4 in VerilogEval Machine benchmark. This remarkable balance between accuracy and efficiency is made possible by leveraging our new RTL code dataset and a customized LLM algorithm, both of which have been made fully open-source.

cs.PL↗

HLSDebugger: Identification and Correction of Logic Bugs in HLS Code with LLM Solutions

High-level synthesis (HLS) accelerates hardware design by enabling the automatic translation of high-level descriptions into efficient hardware implementations. However, debugging HLS code is a challenging and labor-intensive task, especially for novice circuit designers or software engineers without sufficient hardware domain knowledge. The recent emergence of Large Language Models (LLMs) is promising in automating the HLS debugging process. Despite the great potential, three key challenges persist when applying LLMs to HLS logic debugging: 1) High-quality circuit data for training LLMs is scarce, posing a significant challenge. 2) Debugging logic bugs in hardware is inherently more complex than identifying software bugs with existing golden test cases. 3) The absence of reliable test cases requires multi-tasking solutions, performing both bug identification and correction. complicates the multi-tasking required for effective HLS debugging. In this work, we propose a customized solution named HLSDebugger to address the challenges. HLSDebugger first generates and releases a large labeled dataset with 300K data samples, targeting HLS logic bugs. The HLSDebugger model adopts an encoder-decoder structure, performing bug location identification, bug type prediction, and bug correction with the same model. HLSDebugger significantly outperforms advanced LLMs like GPT-4 in bug identification and by more than 3x in bug correction. It makes a substantial advancement in the exploration of automated debugging of HLS code.

cs.SE↗

EDALearn: A Comprehensive RTL-to-Signoff EDA Benchmark for Democratized and Reproducible ML for EDA Research

The application of Machine Learning (ML) in Electronic Design Automation (EDA) for Very Large-Scale Integration (VLSI) design has garnered significant research attention. Despite the requirement for extensive datasets to build effective ML models, most studies are limited to smaller, internally generated datasets due to the lack of comprehensive public resources. In response, we introduce EDALearn, the first holistic, open-source benchmark suite specifically for ML tasks in EDA. This benchmark suite presents an end-to-end flow from synthesis to physical implementation, enriching data collection across various stages. It fosters reproducibility and promotes research into ML transferability across different technology nodes. Accommodating a wide range of VLSI design instances and sizes, our benchmark aptly represents the complexity of contemporary VLSI designs. Additionally, we provide an in-depth data analysis, enabling users to fully comprehend the attributes and distribution of our data, which is essential for creating efficient ML models. Our contributions aim to encourage further advances in the ML-EDA domain.

cs.LG↗

Profile-Guided Temporal Prefetching

Temporal prefetching shows promise for handling irregular memory access patterns, which are common in data-dependent and pointer-based data structures. Recent studies introduced on-chip metadata storage to reduce the memory traffic caused by accessing metadata from off-chip DRAM. However, existing prefetching schemes struggle to efficiently utilize the limited on-chip storage. An alternative solution, software indirect access prefetching, remains ineffective for optimizing temporal prefetching. In this work, we propose Prophet--a hardware-software co-designed framework that leverages profile-guided methods to optimize metadata storage management. Prophet profiles programs using counters instead of traces, injects hints into programs to guide metadata storage management, and dynamically tunes these hints to enable the optimized binary to adapt to different program inputs. Prophet is designed to coexist with existing hardware temporal prefetchers, delivering efficient, high-performance solutions for frequently executed workloads while preserving the original runtime scheme for less frequently executed workloads. Prophet outperforms the state-of-the-art temporal prefetcher, Triangel, by 14.23%, effectively addressing complex temporal patterns where prior profile-guided solutions fall short (only achieving 0.1% performance gain). Prophet delivers superior performance across all evaluated workload inputs, introducing negligible profiling, analysis, and instruction overhead.

cs.AR↗

CircuitFusion: Multimodal Circuit Representation Learning for Agile Chip Design

The rapid advancements of AI rely on the support of ICs. However, the growing complexity of digital ICs makes the traditional IC design process costly and time-consuming. In recent years, AI-assisted IC design methods have demonstrated great potential, but most methods are task-specific or focus solely on the circuit structure in graph format, overlooking other circuit modalities with rich functional information. In this paper, we introduce CircuitFusion, the first multimodal and implementation-aware circuit encoder. It encodes circuits into general representations that support different downstream circuit design tasks. To learn from circuits, we propose to fuse three circuit modalities: hardware code, structural graph, and functionality summary. More importantly, we identify four unique properties of circuits: parallel execution, functional equivalent transformation, multiple design stages, and circuit reusability. Based on these properties, we propose new strategies for both the development and application of CircuitFusion: 1) During circuit preprocessing, utilizing the parallel nature of circuits, we split each circuit into multiple sub-circuits based on sequential-element boundaries, each sub-circuit in three modalities. 2) During CircuitFusion pre-training, we introduce three self-supervised tasks that utilize equivalent transformations both within and across modalities. 3) When applying CircuitFusion to downstream tasks, we propose a new retrieval-augmented inference method, which retrieves similar known circuits as a reference for predictions. It improves fine-tuning performance and even enables zero-shot inference. Evaluated on five different circuit design tasks, CircuitFusion consistently outperforms the SOTA supervised method specifically developed for every single task, demonstrating its generalizability and ability to learn circuits' inherent properties.

cs.AR↗