arXiv subjects

Zhili Lin

Publications and source records attributed to Zhili Lin.

9 recordsLinked to original sources

arXiv2026

An AI-driven robotic system for two-dimensional hetero-assemblies

Nanomaterials stacked on-demand, such as rotationally assembled two-dimensional (2D) van der Waals (vdW) layered compounds, provides a versatile platform for quantum simulation and the exploration of exotic electronic phases. Currently, however, such nanoassemblies remain largely confined to inefficiency, manually operated process, limiting their potential for probing emergent physical phenomena. There is a pressing need in the field for high-precision, automated assembling techniques, especially for the scalable fabrication of 2D twistronic heterostructures. Here, we present an intelligent automation system dedicated to the fabrication of van der Waals stacks, following the state-of-the-art protocol for dry transfer of exfoliated 2D materials. The system further employs metadata generated from each automated stacking procedure to perform reinforcement learning, thereby continuously bettering its performances. As a concrete demonstration, we fabricate twisted bilayer graphene (TBLG) -- known for its challenging preparation -- and exhibit its unconventional superconductivity near the magic angle. Our work may pave the way for high-throughput fabrication of low-dimensional nanomaterials including twistronic heterostructures, where integrating data mining and artificial intelligence can accelerate the discovery of novel physical phenomena.

cond-mat.mes-hall↗

arXiv2026

Batch-Fabricated PDMS Templates for the Robotic Transfer of 2D Materials

Robotic stacking of van der Waals heterostructures has been at the verge thanks to the convergence between artificial intelligence (AI) and two-dimensional (2D) materials research. Key ingredients to fulfill this pursuit often include algorithms to identify layer compounds on chips, hard-wares to realize sophisticated operations of motion and/or rotation in a microscale, and, as importantly, highly-standardized and uniform transfer stamps that are often used in picking up layered materials under a microscope. Here, we report a hot-casted-droplet batch fabrication method for polydimethylsiloxane (PDMS) templates tailored for dry transfer of 2D materials. Controlled precursor formulation, degassing, and motorized-syringe dispensing produce dome-shaped PDMS templates with ultra-smooth surfaces (root-mean-square roughness about 0.3 nm at relatively low curing temperatures). By tuning the curing temperature, the reproducible and controllable apex curvature allows precisely defined contact area between the organic adhesive film and substrate, via thermal expansion. Our results further reveals thermalmechanical behaviors with different casting parameters of such PDMS domes. This scalable and parameterized fabrication protocol gives rise to uniform transfer-stamps with ultra-smooth surface, which may be beneficial for future AI-driven robotic assembly of 2D material heterostructures.

cond-mat.mtrl-sci↗

arXiv2025

Electromagnetic Waves Determined by the Tangential Electric Field of Incident Plane Wave at a Charged and Lossy Planar Interface

Based on the normal and tangential decomposition of both the wave vectors and the electric fields of plane electromagnetic waves at a charged and lossy planar interface, all of the incident, reflected, and refracted plane waves are found to be only determined by the tangential electric field of the incident plane wave. The complex wave vectors are easily calculated from the tangential wave vector of the incident plane wave based on the complex angles given by the complex Snell's law. The electric field magnitudes of the incident, reflected and refracted waves are directly derived from the tangential electric field magnitude of the incident plane based on the relationship of the two different types of decomposition and the continuous boundary condition of tangential electric fields. The time-averaged Poynting vectors and the surface Joule heat density at the interface are also given to demonstrate the validity of the formulation by the energy balance condition together with a specific example. This work directly proves the uniqueness theorem of time-varying electromagnetic fields and opens a new and fast route for calculating the reflected and transmitted waves at a charged and lossy planar interface without the need to perform the polarization decomposition of the incident plane wave.

physics.optics↗

arXiv2025

Plane-Wave Reflection and Transmission at Arbitrarily Oriented and Charged Planar Interfaces between Lossy Isotropic Media

A general algorithm for calculating the reflection and refraction of nonuniform plane waves from an arbitrarily oriented and charged planar interface between two lossy isotropic media is proposed based on the decomposition of the complex wave vector and complex wave numbers with respect to the unit normal vector of the interface. According to the complex vector analysis, the exact definition of the complex angles of incidence, reflection and refraction are presented and applied in the complex forms of Snell's law and Fresnel equations to quickly and correctly calculate the complex wave vectors and the complex electric fields of the reflected and refracted waves at a charged interface where the surface charge densities are considered. Two practical examples are given to demonstrate the validity and effectiveness of the proposed methodology. The method may find applications in the fields of remote sensing, light ray-tracing and the interaction of electromagnetic waves with absorbing media.

physics.optics↗

arXiv2024

Multiple boundary states in bilayer and decorated Su-Schrieffer-Heeger-like models

Topological boundary states have attracted widespread fascination due to their series of intriguing properties. In this paper, we investigate the multiple boundary states within the two kinds of extended Su-Schrieffer-Heeger (SSH) models. The coexistence of boundary states that exist both in the bulk and band gaps is realized based on the bilayer SSH-like model, which consists of two conventional square-root SSH models that are directly coupled. We further show the square-root topology within the decorated SSH-like model, which supports multiple boundary states that could be embedded into the bulk continuum by tuning the hopping parameters. In addition, the connection between the decorated SSH-like model and its effectively decomposed counterparts is revealed. Our results broaden insight into the multiple boundary states and open up an exciting avenue for the future exploration of square-root topology.

cond-mat.mes-hall↗

arXiv2022

A universal and improved mutation strategy for iterative wavefront shaping

Recent advances in iterative wavefront shaping (WFS) techniques have made it possible to manipulate the light focusing and transport in scattering media. To improve the optimization performance, various optimization algorithms and improved strategies have been utilized. Here, a novel guided mutation (GM) strategy is proposed to improve optimization efficiency for iterative WFS. For both phase modulation and binary amplitude modulation, considerable improvements in optimization effect and rate have been obtained using multiple GM-enhanced algorithms. Due of its improvements and universality, GM is beneficial for applications ranging from controlling the transmission of light through disordered media to optical manipulation behind them.

physics.optics↗

arXiv2022

High fidelity generation of complex optical field through scattering medium with iterative wavefront optimization

Light scattering within scattering media presents a substantial obstacle to optical transmission. A speckle pattern with random amplitude and phase distribution is observed when coherent light travels through strong scattering media. Fortunately, wavefront shaping has been successfully employed with a spatial light modulator to recover intensity targets after scattering media, such as a sharp focus point or specified two-dimensional patterns. There have, however, been few studies that attempted to separately manipulate the amplitude and phase of the focusing field. In this paper, we propose a feedback-based wavefront shaping method to generate complex optical fields through scattering medium. A reliable phase retrieval approach is introduced to provide the complex feedback information, i.e., the amplitude and phase of the focusing field. Accordingly, in order to modulate the speckle field into a desired complex structured optical field, a multi-objective genetic algorithm is used to find the best phase map. To demonstrate the proposed method's high performance, experimental tests have been carried out. High fidelity is demonstrated in the generation of diverse complex light fields, both in amplitude and phase. Our findings may facilitate the manipulation of light field through scattering medium, and are anticipated to further promote future applications such as optogenetics, vortex optical communication, and optical trapping through scattering media.

physics.optics↗

arXiv2016

Nonequilibrium and nonlinear kinetics as key determinants for bistability in fission yeast G2-M transition

A living cell is an open, nonequilibrium biochemical system where ATP hydrolysis serves as the energy source for a wide range of intracellular processes, possibly including the assurance for decision-making. In the fission yeast cell cycle, the transition from G2 to M phase is driven by the activation of Cdc13/Cdc2 and Cdc25 and the deactivation of Wee1 through phosphorylation-dephosphorylation cycles with feedback loops. Here, we present a kinetic description of the G2-M circuit which reveals that both cellular ATP level and ATP hydrolysis free energy critically control Cdc2 activation. Using fission yeast nucleoplasmic extract (YNPE), we experimentally verify that increased ATP level drives the activation of Cdc2 which exhibits bistability and hysteresis in response to changes in cellular ATP level and ATP hydrolysis energy. These findings suggest that cellular ATP level and ATP hydrolysis energy are determinants of the bistability and robustness of Cdc2 activation during G2-M transition.

q-bio.MN↗

arXiv2009

The Optimal Spatially-Smoothed Source Patterns for the Pseudospectral Time-Domain Method

Spatially-smoothed sources are often utilized in the pseudospectral time-domain (PSTD) method to suppress the associated aliasing errors to levels as low as possible. In this work, the explicit conditions of the optimal source patterns for these spanning sources are presented based on the fact that the aliasing errors are mainly attributed to the high spatial-frequency parts of the time-stepped source items and subsequently demonstrated to be exactly corresponding to the normalized rows of Pascal's triangle. The outstanding performance of these optimal sources is verified by the practical 1-D, 2-D and 3-D PSTD simulations and compared with that of non-optimal sources.

physics.optics↗