arXiv subjects

Zhendong Li

Publications and source records attributed to Zhendong Li.

At least 109 records · Page 6Linked to original sources

arXiv2022

Joint Communication and Computation Design in Transmissive RMS Transceiver Enabled Multi-Tier Computing Networks

In this paper, a novel transmissive reconfigurable meta-surface (RMS) transceiver enabled multi-tier computing network architecture is proposed for improving computing capability, decreasing computing delay and reducing base station (BS) deployment cost, in which transmissive RMS equipped with a feed antenna can be regarded as a new type of multi-antenna system. We formulate a total energy consumption minimization problem by a joint optimization of subcarrier allocation, task input bits, time slot allocation, transmit power allocation and RMS transmissive coefficient while taking into account the constraints of communication resources and computing resources. This formulated problem is a non-convex optimization problem due to the high coupling of optimization variables, which is NP-hard to obtain its optimal solution. To address the above challenging problems, block coordinate descent (BCD) technique is employed to decouple the optimization variables to solve the problem. Specifically, the joint optimization problem of subcarrier allocation, task input bits, time slot allocation, transmit power allocation and RMS transmissive coefficient is divided into three subproblems to solve by applying BCD. Then, the decoupled three subproblems are optimized alternately by using successive convex approximation (SCA) and difference-convex (DC) programming until the convergence is achieved. Numerical results verify that our proposed algorithm is superior in reducing total energy consumption compared to other benchmarks.

eess.SP↗

arXiv2022

Variational Quantum Computation of Molecular Linear Response Properties on a Superconducting Quantum Processor

Simulating response properties of molecules is crucial for interpreting experimental spectroscopies and accelerating materials design. However, it remains a long-standing computational challenge for electronic structure methods on classical computers. While quantum computers hold the promise to solve this problem more efficiently in the long run, existing quantum algorithms requiring deep quantum circuits are infeasible for near-term noisy quantum processors. Here, we introduce a pragmatic variational quantum response (VQR) algorithm for response properties, which circumvents the need for deep quantum circuits. Using this algorithm, we report the first simulation of linear response properties of molecules including dynamic polarizabilities and absorption spectra on a superconducting quantum processor. Our results indicate that a large class of important dynamical properties such as Green's functions are within the reach of near-term quantum hardware using this algorithm in combination with suitable error mitigation techniques.

quant-ph↗

arXiv2022

Time-reversal symmetry adaptation in relativistic density matrix renormalization group algorithm

In the nonrelativistic Schrödinger equation, the total spin $S$ and spin projection $M$ are good quantum numbers. In contrast, spin symmetry is lost in the presence of spin-dependent interactions such as spin-orbit couplings in relativistic Hamiltonians. Previous implementations of relativistic density matrix renormalization group algorithm (R-DMRG) only employing particle number symmetry are much more expensive than nonrelativistic DMRG. Besides, artificial breaking of Kramers degeneracy can happen in the treatment of systems with odd number of electrons. To overcome these issues, we introduce time-reversal symmetry adaptation for R-DMRG. Since the time-reversal operator is antiunitary, this cannot be simply achieved in the usual way. We define a time-reversal symmetry-adapted renormalized basis and present strategies to maintain the structure of basis functions during the sweep optimization. With time-reversal symmetry adaptation, only half of the renormalized operators are needed and the computational costs of Hamiltonian-wavefunction multiplication and renormalization are reduced by half. The present construction of time-reversal symmetry-adapted basis also directly applies to other tensor network states without loops.

physics.chem-ph↗

arXiv2022

Multi-Antenna Systems by Transmissive Reconfigurable Meta-Surface

Reconfigurable meta-surface (RMS) is proposed as a very promising and novel technology, which is composed of a large number of low-cost passive elements, and can achieve passive beamforming by controlling the amplitude and phase of incident electromagnetic (EM) waves. Therefore, in order to solve the challenges of high power consumption and high cost of existing base stations (BSs), we propose a low-cost and low-power consumption transmissive RMS multi-antenna system in this paper. Specifically, we first provide an overview of the transmissive RMS multi-antenna system, including its advantages, network architecture, transmission mechanism, modulation principle, channel model and channel estimation technique. Then, we address transceiver design and optimization for downlink (DL) and uplink (UL), and some numerical results are also given to verify the effectiveness of the proposed algorithm. Finally, several potential research directions of the transmissive RMS multi-antenna system are given to inspire further investigation in future work.

eess.SP↗

arXiv2021

Robust Beamforming Design and Time Allocation for IRS-assisted Wireless Powered Communication Networks

In this paper, a novel intelligent reflecting surface (IRS)-assisted wireless powered communication network (WPCN) architecture is proposed for power-constrained Internet-of-Things (IoT) smart devices, where IRS is exploited to improve the performance of WPCN under imperfect channel state information (CSI). We formulate a hybrid access point (HAP) transmit energy minimization problem by jointly optimizing time allocation, HAP energy beamforming, receiving beamforming, user transmit power allocation, IRS energy reflection coefficient and information reflection coefficient under the imperfect CSI and non-linear energy harvesting model. On account of the high coupling of optimization variables, the formulated problem is a non-convex optimization problem that is difficult to solve directly. To address the above-mentioned challenging problem, alternating optimization (AO) technique is applied to decouple the optimization variables to solve the problem. Specifically, through AO, time allocation, HAP energy beamforming, receiving beamforming, user transmit power allocation, IRS energy reflection coefficient and information reflection coefficient are divided into three sub-problems to be solved alternately. The difference-of-convex (DC) programming is used to solve the non-convex rank-one constraint in solving IRS energy reflection coefficient and information reflection coefficient. Numerical simulations verify the superiority of the proposed optimization algorithm in decreasing HAP transmit energy compared with other benchmark schemes.

cs.IT↗

arXiv2021

Structured eigenvalue problems in electronic structure methods from a unified perspective

In (relativistic) electronic structure methods, the quaternion matrix eigenvalue problem and the linear response (Bethe-Salpeter) eigenvalue problem for excitation energies are two frequently encountered structured eigenvalue problems. While the former problem was thoroughly studied, the later problem in its most general form, namely, the complex case without assuming the positive definiteness of the electronic Hessian, is not fully understood. In view of their very similar mathematical structures, we examined these two problems from a unified point of view. We showed that the identification of Lie group structures for their eigenvectors provides a framework to design diagonalization algorithms as well as numerical optimizations techniques on the corresponding manifolds. By using the same reduction algorithm for the quaternion matrix eigenvalue problem, we provided a necessary and sufficient condition to characterize the different scenarios, where the eigenvalues of the original linear response eigenvalue problem are real, purely imaginary, or complex. The result can be viewed as a natural generalization of the well-known condition for the real matrix case.

physics.chem-ph↗

arXiv2021

Beamforming Design and Power Allocation for Transmissive RMS-based Transmitter Architectures

This letter investigates a downlink multiple input single output (MISO) system based on transmissive reconfigurable metasurface (RMS) transmitter. Specifically, a transmitter design based on a transmissive RMS equipped with a feed antenna is first proposed. Then, in order to maximize the achievable sum-rate of the system, the beamforming design and power allocation are jointly optimized. Since the optimization variables are coupled, this formulated optimization problem is non-convex, so it is difficult to solve it directly. To solve this problem, we propose an alternating optimization (AO) technique based on difference-of-convex (DC) programming and successive convex approximation (SCA). Simulation results verify that the proposed algorithm can achieve convergence and improve the achievable sum-rate of the system.

cs.IT↗

arXiv2021

Expressibility of comb tensor network states (CTNS) for the P-cluster and the FeMo-cofactor of nitrogenase

Polynuclear transition metal complexes such as the P-cluster and the FeMo-cofactor of nitrogenase with eight transition metal centers represent a great challenge for current electronic structure methods. In this work, we initiated the use of comb tensor network states (CTNS), whose underlying topology has a one-dimensional backbone and several one-dimensional branches, as a many-body wavefunction ansatz to tackle these challenging systems. As an important first step, we explored the expressive power of CTNS with different underlying topologies. To this end, we presented an algorithm to express a configuration interaction (CI) wavefunction into CTNS based on the Schmidt decomposition. The algorithm was illustrated for representing approximate CI wavefunctions obtained from selected CI calculations for the P-cluster and the FeMo-cofactor into CTNS with three chemically meaningful comb structures, which successively group orbitals belonging to the same atom into branches. The conventional matrix product states (MPS) representation was obtained as a special case. We also discussed the insights gained from such decompositions, which shed some light on the future developments of efficient numerical tools for polynuclear transition metal complexes.

physics.chem-ph↗

arXiv2021

Joint Beamforming Design and Power Splitting Optimization in IRS-Assisted SWIPT NOMA Networks

This paper proposes a novel network framework of intelligent reflecting surface (IRS)-assisted simultaneous wireless information and power transfer (SWIPT) non-orthogonal multiple access (NOMA) networks, where IRS is used to enhance the NOMA performance and the wireless power transfer (WPT) efficiency of SWIPT. We formulate a problem of minimizing base station (BS) transmit power by jointly optimizing successive interference cancellation (SIC) decoding order, BS transmit beamforming vector, power splitting (PS) ratio and IRS phase shift while taking into account the quality-of-service (QoS) requirement and energy harvested threshold of each user. The formulated problem is non-convex optimization problem, which is difficult to solve it directly. Hence, a two-stage algorithm is proposed to solve the above-mentioned problem by applying semidefinite relaxation (SDR), Gaussian randomization and successive convex approximation (SCA). Specifically, after determining SIC decoding order by designing IRS phase shift in the first stage, we alternately optimize BS transmit beamforming vector, PS ratio, and IRS phase shift to minimize the BS transmit power. Numerical results validate the effectiveness of our proposed optimization algorithm in reducing BS transmit power compared to other baseline algorithms. Meanwhile, compared with non-IRS-assisted network, the IRS-assisted SWIPT NOMA network can decrease BS transmit power by 51.13\%.

cs.IT↗

arXiv2020

Quantum computation of molecular response properties

Accurately predicting response properties of molecules such as the dynamic polarizability and hyperpolarizability using quantum mechanics has been a long-standing challenge with widespread applications in material and drug design. Classical simulation techniques in quantum chemistry are hampered by the exponential growth of the many-electron Hilbert space as the system size increases. In this work, we propose an algorithm for computing linear and nonlinear molecular response properties on quantum computers, by first reformulating the target property into a symmetric expression more suitable for quantum computation via introducing a set of auxiliary quantum states, and then determining these auxiliary states via solving the corresponding linear systems of equations on quantum computers. On one hand, we prove that using the quantum linear system algorithm [Harrow et al., Phys. Rev. Lett. 103, 150502 (2009)] as a subroutine the proposed algorithm scales only polynomially in the system size instead of the dimension of the exponentially large Hilbert space, and hence achieves an exponential speedup over existing classical algorithms. On the other hand, we introduce a variational hybrid quantum-classical variant of the proposed algorithm, which is more practical for near-term quantum devices.

physics.chem-ph↗

arXiv2020

Recent developments in the PySCF program package

PYSCF is a Python-based general-purpose electronic structure platform that both supports first-principles simulations of molecules and solids, as well as accelerates the development of new methodology and complex computational workflows. The present paper explains the design and philosophy behind PYSCF that enables it to meet these twin objectives. With several case studies, we show how users can easily implement their own methods using PYSCF as a development environment. We then summarize the capabilities of PYSCF for molecular and solid-state simulations. Finally, we describe the growing ecosystem of projects that use PYSCF across the domains of quantum chemistry, materials science, machine learning and quantum information science.

physics.chem-ph↗

arXiv2019

Stochastic many-body perturbation theory for electron correlation energies

Treating electron correlation more accurately and efficiently is at the heart of the development of electronic structure methods. In the present work, we explore the use of stochastic approaches to evaluate high-order electron correlation energies, whose conventional computational scaling is unpleasantly steep, being $O(N^{n+3})$ with respect to the system size $N$ and the perturbation order $n$ for the Møller-Plesset (MP) series. To this end, starting from Goldstone's time-dependent formulation of \emph{ab initio} many-body perturbation theory (MBPT), we present a reformulation of MBPT, which naturally leads to an Monte Carlo scheme with $O(nN^2+n^2N+f(n))$ scaling at each step, where $f(n)$ is a function of $n$ depending on the specific numerical scheme. Proof-of-concept calculations demonstrate that the proposed quantum Monte Carlo algorithm successfully extends the previous Monte Carlo approaches for MP2 and MP3 to higher orders. Therefore, for the first time the Goldstone's time-dependent formulation is made useful numerically for electron correlation energies, not only being purely as a theoretical tool.

physics.chem-ph↗

arXiv2019

Stimulated X-ray Raman and Absorption Spectroscopy of Iron-Sulfur Dimers

Iron-sulfur complexes play an important role in biological processes such as metabolic electron transport. A detailed understanding of the mechanism of long range electron transfer requires knowledge of the electronic structure of the complexes, which has traditionally been challenging to obtain, either by theory or by experiment, but the situation has begun to change with advances in quantum chemical methods and intense free electron laser light sources. We compute the signals from stimulated X-ray Raman spectroscopy (SXRS) and absorption spectroscopy of homovalent and mixed-valence [2Fe-2S] complexes, using the {\it ab initio} density matrix renormalization group (DMRG) algorithm. The simulated spectra show clear signatures of the theoretically predicted dense low-lying excited states within the d-d manifold. Furthermore, the difference in signal intensity between the absorption-active and Raman-active states provides a potential mechanism to selectively excite states by a proper tuning of the excitation pump, to access the electronic dynamics within this manifold.

physics.chem-ph↗

arXiv2019

On the generalization of the exponential basis for tensor network representations of long-range interactions in two and three dimensions

In one dimension (1D), a general decaying long-range interaction can be fit to a sum of exponential interactions $e^{-λr_{ij}}$ with varying exponents $λ$, each of which can be represented by a simple matrix product operator (MPO) with bond dimension $D=3$. Using this technique, efficient and accurate simulations of 1D quantum systems with long-range interactions can be performed using matrix product states (MPS). However, the extension of this construction to higher dimensions is not obvious. We report how to generalize the exponential basis to 2D and 3D by defining the basis functions as the Green's functions of the discretized Helmholtz equation for different Helmholtz parameters $λ$, a construction which is valid for lattices of any spatial dimension. Compact tensor network representations can then be found for the discretized Green's functions, by expressing them as correlation functions of auxiliary fermionic fields with nearest neighbor interactions via Grassmann Gaussian integration. Interestingly, this analytic construction in 3D yields a $D=4$ tensor network representation of correlation functions which (asymptotically) decay as the inverse distance ($r^{-1}_{ij}$), thus generating the (screened) Coulomb potential on a cubic lattice. These techniques will be useful in tensor network simulations of realistic materials.

cond-mat.str-el↗

arXiv2019

Electronic landscape of the P-cluster of nitrogenase as revealed through many-electron quantum wavefunctions

The electronic structure of the nitrogenase metal cofactors is central to nitrogen fixation. However, the P-cluster and iron molybdenum cofactor, each containing eight irons, have resisted detailed characterization of their electronic properties. Through exhaustive many-electron wavefunction simulations enabled by new theoretical methods, we report on the low-energy electronic states of the P-cluster in three oxidation states. The energy scales of orbital and spin excitations overlap, yielding a dense spectrum with features we trace to the underlying atomic states and recouplings. The clusters exist in superpositions of spin configurations with non-classical spin correlations, complicating interpretation of magnetic spectroscopies, while the charges are mostly localized from reorganization of the cluster and its surroundings. Upon oxidation, the opening of the P-cluster significantly increases the density of states, which is intriguing given its proposed role in electron transfer. These results demonstrate that many-electron simulations stand to provide new insights into the electronic structure of the nitrogenase cofactors.

physics.chem-ph↗

arXiv2018

Classifications and canonical forms of tensor product expressions in the presence of permutation symmetries

Complicated mathematical equations involving products of tensors with permutation symmetries, frequently encountered in fields such as general relativity and quantum chemistry (e.g., equations in high-order coupled cluster theories), require computer-based automatic derivations and manipulations. In these processes, a key step is the collection of tensor product terms that can be found identical by utilizing permutation symmetries of tensors or relabeling dummy indices, which is usually achieved by defining a canonical form for tensor product expressions. However, the problem of finding a canonical form is nontrivial, and can be potentially of exponential cost in the number of indices. In this work, we provided a general solution to this tensor canonicalization problem.

physics.chem-ph↗

arXiv2018

Efficient representation of long-range interactions in tensor network algorithms

We describe a practical and efficient approach to represent physically realistic long-range interactions in two-dimensional tensor network algorithms via projected entangled-pair operators (PEPOs). We express the long-range interaction as a linear combination of correlation functions of an auxiliary system with only nearest-neighbor interactions. To obtain a smooth and radially isotropic interaction across all length scales, we map the physical lattice to an auxiliary lattice of expanded size. Our construction yields a long-range PEPO as a sum of ancillary PEPOs, each of small, constant bond dimension. This representation enables efficient numerical simulations with long-range interactions using projected entangled pair states.

cond-mat.str-el↗

arXiv2018

The electronic complexity of the ground-state of the FeMo cofactor of nitrogenase as relevant to quantum simulations

We report that a recent active space model of the nitrogenase FeMo cofactor, proposed in the context of quantum simulations, is not representative of the electronic structure of the FeMo cofactor ground-state. Although quantum resource estimates, outside of the cost of adiabatic state preparation, will not be much affected, conclusions should not be drawn from the complexity of classical simulations of the electronic structure of this system in this active space. We provide a different model active space for the FeMo cofactor that contains the basic open-shell qualitative character, which may be useful as a benchmark system for making classical and quantum resource estimates.

physics.chem-ph↗