arXiv subjects

Zhe Wang

Publications and source records attributed to Zhe Wang.

715 records · Page 40Linked to original sources

arXiv2011

Singlet-triplet excitations and high-field magnetization in CuTe2O5

By measuring the THz electron spin resonance (ESR) transmission spectra and high-field magnetization on the spin-gapped system CuTe$_2$O$_5$, we identified the singlet-triplet excitations in the dimerized non-magnetic ground state. The determined spin-gap value of $hν_0=4.94$ meV at the $Γ$ point ($\mathbf{Q}\simeq\mathbf{0}$) is significantly smaller than the strongest antiferromagnetic exchange interaction between the Cu ions predicted by theoretical investigations. We also observed the critical field $H_{c1}^{a^*}=37.6$ T for \textbf{H} $\bot$ \emph{bc}-plane and $H_{c1}^{bc}=40.6$ T for \textbf{H} $\|$ \emph{bc}-plane at the onset of non-zero magnetization, consistent with the gap value and corresponding anisotropic \emph{g}-factors determined previously. The observed singlet-triplet excitations in Faraday and Voigt configurations suggest a mixing of the singlet state with the $S_z=0$ triplet state and the $S_z=\pm 1$ triplet states, respectively, due to the Dzyaloshinskii-Moriya (DM) interaction with a DM vector perpendicular to the crystalline \emph{bc}-plane.

cond-mat.str-el↗

arXiv2011

Daya Bay Neutrino Experiment: Goal, Progress and Schedule

Daya Bay Neutrino Experiment is dedicated to measuring the last unobserved neutrino mixing angle theta_13. The predicted precision on sin^2(2theta_13) is 0.01 at 90% confidence level. This document briefly reviews the measurement method and detector construction status. The first two anti-neutrino detectors' dry run result is also discussed. The Daya Bay near hall data taking is expected to commence in the summer of 2011 and the data taking of all of the three halls in the summer of 2012.

physics.ins-det↗

arXiv2011

Efficient generation of isolated attosecond pulses with high beam-quality by two-color Bessel-Gauss beams

The generation of isolated attosecond pulses with high efficiency and high beam quality is essential for attosec- ond spectroscopy. We numerically investigate the supercontinuum generation in a neutral rare-gas medium driven by a two-color Bessel-Gauss beam. The results show that an efficient smooth supercontinuum in the plateau is obtained after propagation, and the spatial profile of the generated attosecond pulse is Gaussian-like with the divergence angle of 0.1 degree in the far field. This bright source with high beam quality is beneficial for detecting and controlling the microscopic processes on attosecond time scale.

physics.optics↗

arXiv2011

Simulation Study on neutrino nucleus cross section measurement in Segmented Detector at Spallation Neutron Source

Knowledge of $ν_e$-$\mathrm{Fe}/\mathrm{Pb}$ differential cross sections for $ν_e$ energy below several tens of MeV scale is believed to be crucial in understanding Supernova physics. In a segmented detector at Spallation Neutrino Source, $ν_e$ energy reconstructed from the electron range measurement is strongly affected because of both multiple scattering and electromagnetic showers occurring along the electron passage in target materials. In order to estimate the effect, a simulation study has been performed with a cube block model assuming a perfect tracking precision. The distortion of energy spectrum is observed to be proportional to the atomic number of target material. Feasibility of unfolding the distorted $ν_e$ energy spectrum is studied for both Fe and Pb cases. Evaluation of statistical accuracy attainable is therefore provided for a segmented detector.

nucl-ex↗

arXiv2011

A Non-linearized PLS Model Based on Multivariate Dominant Factor for Laser-induced Breakdown Spectroscopy Measurements

A multivariate dominant factor based non-linearized PLS model is proposed. The intensities of different lines were taken to construct a multivariate dominant factor model, which describes the dominant concentration information of the measured species. In constructing such a multivariate model, non-linear transformation of multi characteristic line intensities according to the physical mechanisms of lased induced plasma spectrum were made, combined with linear-correlation-based PLS method, to model the nonlinear self-absorption and inter-element interference effects. This enables the linear PLS method to describe non-linear relationship more accurately and provides the statistics-based PLS method with physical backgrounds. Moreover, a secondary PLS is applied utilizing the whole spectra information to further correct the model results. Experiments were conducted using standard brass samples. Taylor expansion was applied to make the nonlinear transformation to describe the self-absorption effect of Cu. Then, line intensities of another two elements, Pb and Zn, were taken into account for inter-element interference. The proposed method shows a significant improvement when compared with conventional PLS model. Results also show that, even compared with the already-improved baseline dominant-factor-based PLS model, the present PLS model based on the multivariate dominant factor yields the same calibration quality (R2=0.999) while decreasing the RMSEP from 2.33% to 1.97%. The overall RMSE was also improved to 1.05% from 1.27%.

physics.optics↗

arXiv2011

Spectrum standardization for laser-induced breakdown spectroscopy measurements

This paper presents a spectra normalization method for laser-induced breakdown spectroscopy (LIBS) measurements by converting the recorded characteristic line intensity at varying conditions to the intensity under a standard condition with standard plasma temperature, degree of ionization, and total number density of the interested species to reduce the measurement uncertainty. The characteristic line intensities of the interested species are first converted to the intensity at a fixed temperature and standard degree of ionization but varying total number density for each laser pulse analysis. Under this state, if the influence of the variation of plasma morphology is neglected, the sum of multiple spectral line intensities for the measured element can be regarded proportional to the total number density of the specific element, and the fluctuation of the total number density, or the variation of ablation mass, was compensated for by the application of this relationship. In the experiments with 29 brass alloy samples, the application of this method to determine Cu concentration shows a significant improvement over generally applied normalization method for measurement precision and accuracy. The average RSD value, average value of the error bar, R2, RMSEP, and average value of the maximum relative error were: 5.29%, 0.68%, 0.98, 2.72%, 16.97%, respectively, while the above parameter values for normalization with the whole spectrum area were: 8.61%, 1.37%, 0.95, 3.28%, 29.19%, respectively.

physics.plasm-ph↗

arXiv2011

Observation of the Meissner state in superconducting arrays of 4-Ångstrom carbon nanotubes

We report clear observations of the magnetic Meissner effect in arrays of superconducting 4 Å carbon nanotubes grown in the linear channels of AlPO4-5 (AFI) zeolite single crystals. Both bulk magnetization and magnetic torque experiments show a clear signature of the lower critical Hc1 transition, a pronounced difference in zero-field cooled and field cooled branches during temperature sweeps below 6K, and signatures of 1D superconducting fluctuations below ~15-18 K. These experiments extend the magnetic phase diagram we obtained previously by resistive experiments [Z. Wang et al., Phys. Rev. B 81, 174530 (2010)] towards low magnetic fields and within the range of zero resistance.

cond-mat.supr-con↗

arXiv2011

Bed-inventory Overturn Mechanism for Pant-leg Circulating Fluidized Bed Boilers

A numerical model was established to investigate the lateral mass transfer as well as the mechanism of bed-inventory overturn inside a pant-leg circulating fluidized bed (CFB), which are of great importance to maintain safe and efficient operation of the CFB. Results show that the special flow structure in which the solid particle volume fraction along the central line of the pant-leg CFB is relative high enlarges the lateral mass transfer rate and make it more possible for bed inventory overturn. Although the lateral pressure difference generated from lateral mass transfer inhibits continuing lateral mass transfer, providing the pant-leg CFB with self-balancing ability to some extent, the primary flow rate change due to the outlet pressure change often disable the self-balancing ability by continually enhancing the flow rate difference. As the flow rate of the primary air fan is more sensitive to its outlet pressure, it is easier to lead to bed inventory overturn. While when the solid particle is easier to change its flow patter to follow the surrounding air flow,the self-balancing ability is more active.

physics.flu-dyn↗

arXiv2010

A Novel Multivariate Model Based on Dominant Factor for Laser-induced Breakdown Spectroscopy Measurements

This paper presents a new approach of applying partial least squares method combined with a physical principle based dominant factor. The characteristic line intensity of the specific element was taken to build up the dominant factor to reflect the major elemental concentration and partial least squares (PLS) approach was then applied to further improve the model accuracy. The deviation evolution of characteristic line intensity from the ideal condition was depicted and according to the deviation understanding, efforts were taken to model the non-linear self-absorption and inter-element interference effects to improve the accuracy of dominant factor model. With a dominant factor to carry the main quantitative information, the novel multivariate model combines advantages of both the conventional univariate and PLS models and partially avoids the overuse of the unrelated noise in the spectrum for PLS application. The dominant factor makes the combination model more robust over a wide concentration range and PLS application improves the model accuracy for samples with matrices within the calibration sample set. Results show that RMSEP of the final dominant factor based PLS model decreased to 2.33% from 5.25% when using the conventional PLS approach with full spectral information. Furthermore, with the development in understanding the physics of the laser-induced plasma, there is potential to easily improve the accuracy of the dominant factor model as well as the proposed novel multivariate model.

physics.optics↗

arXiv2009

1D goes 2D: A Kosterlitz Thouless transition in superconducting arrays of 4-Angstrom carbon nanotubes

We report superconducting resistive transition characteristics for array(s) of coupled 4-Angstrom single wall carbon nanotubes embedded in aluminophosphate-five (AFI) zeolite. The transition was observed to initiate at 15K with a slow resistance decrease switching to a sharp, order of magnitude drop between 7.5-6.0K. The transition has strong (anisotropic) magnetic field dependence. Differential resistance versus current (voltage) measurements indicate that the establishment of coherence proceeds in stages as the temperature is lowered below 15K. In particular, the sharp resistance drop and its attendant nonlinear IV characteristics are consistent with the manifestations of a Kosterlitz-Thouless (KT) transition that establishes quasi long range order in the plane transverse to the c-axis of the nanotubes, leading to an inhomogeneous system comprising 3D superconducting regions connected by weak links. Global coherence is established at below 5K with the appearance of a well-defined supercurrent gap at 2K.

cond-mat.supr-con↗

arXiv2009

Study of the decay K+ => pi+,nu,nubar in the momentum region 140<Ppi<199 MeV/c

Experiment E949 at Brookhaven National Laboratory has observed three new events consistent with the decay K+ => pi+,nu,nubar in the pion momentum region 140 < P_pi < 199 MeV/c in an exposure of 1.71e12 stopped kaons with an estimated total background of 0.93+-0.17(stat.)+0.32-0.24(syst.) events. This brings the total number of observed K+ => pi+,nu,nubar events to seven. Combining this observation with previous results, assuming the pion spectrum predicted by the standard model, results in a branching ratio of (1.73+1.15-1.05)e-10. An interpretation of the results for alternative models of the decay K^ => pi+,nothing is also presented.

hep-ex↗

arXiv2008

Holomorphic Motions and Related Topics

In this article we give an expository account of the holomorphic motion theorem based on work of Màñé-Sad-Sullivan, Bers-Royden, and Chirka. After proving this theorem, we show that tangent vectors to holomorphic motions have $|ε\log ε|$ moduli of continuity and then show how this type of continuity for tangent vectors can be combined with Schwarz's lemma and integration over the holomorphic variable to produce Hölder continuity on the mappings. We also prove, by using holomorphic motions, that Kobayashi's and Teichmüller's metrics on the Teichmüller space of a Riemann surface coincide. Finally, we present an application of holomorphic motions to complex dynamics, that is, we prove the Fatou linearization theorem for parabolic germs by involving holomorphic motions.

math.CV↗

arXiv2007

Networked Multiple Description Estimation and Compression with Resource Scalability

We present a joint source-channel multiple description (JSC-MD) framework for resource-constrained network communications (e.g., sensor networks), in which one or many deprived encoders communicate a Markov source against bit errors and erasure errors to many heterogeneous decoders, some powerful and some deprived. To keep the encoder complexity at minimum, the source is coded into K descriptions by a simple multiple description quantizer (MDQ) with neither entropy nor channel coding. The code diversity of MDQ and the path diversity of the network are exploited by decoders to correct transmission errors and improve coding efficiency. A key design objective is resource scalability: powerful nodes in the network can perform JSC-MD distributed estimation/decoding under the criteria of maximum a posteriori probability (MAP) or minimum mean-square error (MMSE), while primitive nodes resort to simpler MD decoding, all working with the same MDQ code. The application of JSC-MD to distributed estimation of hidden Markov models in a sensor network is demonstrated. The proposed JSC-MD MAP estimator is an algorithm of the longest path in a weighted directed acyclic graph, while the JSC-MD MMSE decoder is an extension of the well-known forward-backward algorithm to multiple descriptions. Both algorithms simultaneously exploit the source memory, the redundancy of the fixed-rate MDQ, and the inter-description correlations. They outperform the existing hard-decision MDQ decoders by large margins (up to 8dB). For Gaussian Markov sources, the complexity of JSC-MD distributed MAP sequence estimation can be made as low as that of typical single description Viterbi-type algorithms.

cs.IT↗