arXiv Science⌕ Search

arXiv subjects

Zhe Cheng

Publications and source records attributed to Zhe Cheng.

At least 19 recordsLinked to original sources

Thermal and Acoustic Measurements of Hybrid Bonding Stacks

Thermal and structural characterizations of hybrid bonding structures are essential for understanding heat transport in three-dimensional integrated circuits (3D-ICs). In this work, we investigate the effective thermal conductivity of the Cu/dielectric HB layer using time-domain thermoreflectance (TDTR) combined with picosecond ultrasonic technique. Shallow-angle polishing enabled depth-resolved thermal measurements by exposing hybrid bonding layers with different remaining thicknesses, while acoustic echoes were used to identify buried interfaces and determine the thickness. The distinct waveform of the bonding interface echo compared with the Cu/dielectric interface echo suggests that its acoustic response may also reflect the interfacial bonding conditions. The extracted thermal conductivity ranges from 1.14 to 1.75 Wm-1K-1 for the bottom pad layer and from 1.76 to 4.34 Wm-1K-1 for the top pad layer. The difference in thermal conductivity is consistent with the different Cu area fractions of the two layers. Furthermore, the thermal conductivity of the top pad layer increases significantly with the remaining thickness, possibly due to the thermal boundary resistance at the bonding interface, low thermal conductivity of SiCN interlayer, and increased electron scattering in thin Cu structures. Our work demonstrates a practical approach to investigate the thermal properties of buried hybrid bonding layers, providing experimental data for thermal design and modeling of 3D-ICs.

physics.app-ph↗

Resolving the Thermal Labyrinth inside 3D-IC Stacks

The heat pathways in 3D-ICs have long been a labyrinth lacking experimental investigations into spatial distribution of thermal properties, severely limiting study of internal thermal management inside chips. For the first time, we established a methodology for 3D thermal characterizations of advanced 3D-ICs, implemented through a systematic workflow that enables layer-resolved thermal property extraction and the construction of a location-specific thermal database. We demonstrated its application to an advanced sample featuring 2.2-μm-diameter TSVs and ~2-μm-pitch face-to-face hybrid bonding (HB). Time-domain and steady-state thermoreflectance were used to extract the thermal conductivities (TCs) of Al traces, TSV, BEOL interconnects and HB pads, indicating HB structure enables efficient thermal transport with 9 W/m-K TC. Further, we mapped and visualized the TC distribution of TSV structures and RDL Cu wires with small step sizes down to 0.2 μm. Utilizing these results, we proposed an experiment-based thermal model to reveal that co-evolution of interconnect and substrate TCs is essential for thermal design and fabrication towards effective cooling optimization.

physics.app-ph↗

Strong Thermal Conductivity Suppression in Isotope Purified Single Crystal Diamond with Phonon Scatterings of Color Centers

The thermal conductivity of natural diamond can be further improved by ~50% by eliminating isotope impurity to obtain pure 12C diamond. However, unlike isolated point defects, how color centers scatter phonons and correspondingly limit the thermal conductivity remain poorly understood. Here, we report the thermal conductivities of two isotope-purified diamond with different Nitrogen-vacancy (NV) color center concentrations, confirmed by photoluminescence (PL) and secondary-ion mass spectrometry (SIMS). Results show ~ 3200 W m-1 K-1 and ~ 2100 W m-1 K-1 for two samples of low and high NV concentrations, respectively. Modified Callaway model analyses show that first-principles-derived scattering parameters can reproduce room-temperature thermal conductivity of the high NV concentration sample under a vacancy concentration assumption (~30% of the total Nitrogen concentration), but fail to reproduce its temperature dependence. Compared to PL and SIMS results, which show ~7.1-fold NV concentration and ~92-fold difference in total Nitrogen concentration between two samples, suggesting the assumed 30% vacancy fraction may be greatly overestimated. Taken together, these results suggest that NV-color-center defects may scatter phonons more strongly than models treating Nitrogen and vacancy as independent point defects, providing new insights into color-center-induced phonon-scattering mechanisms.

cond-mat.mtrl-sci↗

From Shared Demand Patterns to Local Uncertainty: Probabilistic Load Forecasting by Mixing Compact Adaptations

Probabilistic load forecasting has been widely studied for power-system operation and planning, but customer- and transformer-level forecasting introduces a distinct scalability challenge. At these levels, load uncertainty is strongly affected by customer behavior, weather, and mixed load composition, making it difficult for a single shared model to capture heterogeneous patterns. Using separate probabilistic models can improve local accuracy, but becomes costly to train, store, update, and validate at scale. To address this challenge, we develop a scalable customer-aware forecasting framework that learns common demand behavior through a shared model while adapting only a compact subset of parameters. Rather than using an independent model for each load or assigning each load to a specialized model, the proposed design learns a small bank of low-dimensional adaptation components and allows each load to combine them according to its forecasting characteristics. This preserves shared knowledge across customers while providing sufficient flexibility for heterogeneous and mixed load compositions. Experiments on 590 load profiles from the SMART-DS dataset show consistent improvements in deterministic accuracy and probabilistic quality over statistical, neural-network, Transformer-based, and pretrained time-series baselines, while retaining low storage and inference costs.

cs.LG↗

Ultrahigh Thermal Conductivity in Isotopically Ultrapure Single-Crystal Diamond

Diamond has the highest thermal conductivity among natural materials. Reducing isotope scattering can further push the limit of thermal conductivity of diamond. Here, we report the room-temperature thermal conductivity of a diamond single crystal with an exceptionally low ppm-level 13C content. Secondary ion mass spectrometry (SIMS) reveals a 13C concentration of only ~0.00024% and negligible other impurities, placing this sample as the most isotopically purified diamond samples reported to date. Time-domain thermoreflectance measurements show a room-temperature thermal conductivity of ~3100 W m-1 K-1. Although this value is markedly higher than that of natural diamond, it remains comparable to the best reported values for less isotopically 12C pure diamond. This result suggests that additional phonon-scattering mechanisms beyond isotope scattering may exist at this extreme isotopic purification level. Vacancy defects may contribute to the remaining suppression of thermal conductivity.

cond-mat.mtrl-sci↗

Predictive Structure to Thermal Conductivity Modeling Framework for BEOL Interconnect Stacks in Advanced Technology Nodes Enabled by Extensive Layer Resolved Thermal Measurements

The increasing structural complexity of BEOL interconnect stacks in advanced integrated circuits demands a structure-aware thermal conductivity (\k{appa}) modeling framework. However, generalizable models derived from layer-resolved thermal measurements that quantitatively capture the dependence of \k{appa} on interconnect structures remain lacking, limiting predictive thermal analysis. Here, we establish an experimentally derived, structure-aware \k{appa} modeling framework enabled by time-domain thermoreflectance measurements with ~100 nm depth resolution. Statistical analysis of a compiled dataset comprising over 40 experimentally measured layer-resolved \k{appa} values across diverse BEOL layers reveals a generalizable empirical structure-to-\k{appa} relationship, enabling predictive modeling based on interconnect structure. An intra-layer three-dimensional \k{appa} distribution model based on effective medium theory and realistic layouts further resolves spatial \k{appa} variations within practical interconnect layers. Together, these models establish an experimentally derived, structure-aware \k{appa} modeling framework for predictive and generalizable thermal analysis of advanced interconnect stacks and 3D ICs.

cond-mat.mes-hall↗

High Thermal Conductivity of Back-End-of-Line Compatible Diamond Films

Back-end-of-line (BEOL) thermal management requires electrically insulating heat-spreading dielectric that can be integrated within thermal budgets below 400 C. Here, we report polycrystalline diamond films grown directly on Si at a substrate temperature below 400C. Two films with average thickness of 760 and 1000 nm were characterized by Raman spectroscopy, scanning electron microscopy (SEM), and time-domain thermoreflectance (TDTR). Raman spectra show a sharp diamond peak with minor signatures of non-diamond carbon, while SEM reveals lateral growth and large grain size. Temperature dependent TDTR measurements were performed from room temperature to 100C. Sensitivity analysis indicates that the sensitivity of cross-plane thermal conductivity is comparative to the in-plane thermal conductivity. Accordingly, the films were analyzed using an isotropic thermal model by considering the nearly-isotropic grain structure, yielding room temperature effective thermal conductivity of 73 and 86 W m-1 K-1, respectively. These values are about two orders of magnitude higher than those of conventional dielectric materials and demonstrate the potential of diamond films grown at low temperatures as dielectric heat-spreading layers.

cond-mat.mtrl-sci↗

Active Passivation Tunes Hotspot Locations in GaN Transistors with In Situ Thermal Mechanical Visualization

Efficient thermal dissipation has become critical in emerging electronic devices. However, most existing studies have primarily focused on engineering heat dissipation pathways, largely overlooking the intrinsic behavior of the heat source itself. We demonstrate an active passivation technology that proactively tunes hotspot locations in GaN transistors. By adjusting the active passivation layer length, the hotspot is shifted from the gate edge to the drain-side AP edge, establishing a clear one-to-one spatial correlation. In-situ thermal-mechanical visualization via micro-Raman thermography, combined with multi-physics electro-thermal-mechanical simulations, directly captures the spatial redistribution of both temperature and thermal stress profiles. Electrical analysis confirms that this hotspot migration is driven by the spatial shift of the peak electric field and localized Joule heating. This proactive heat-source tuning strategy provides critical design guidelines for power electronics.

physics.app-ph↗

Mitigating Hallucinations in Large Vision-Language Models via Causal Route Gating

Large vision-language models (LVLMs) often hallucinate content that is fluent yet unsupported by the image, limiting their reliability in real-world deployment. We show that a key failure mode arises from route competition: even when visual tokens receive attention, the final token decision can be dominated by the textual pathway, causing the decoder to follow linguistic priors over visual evidence. To mitigate this, we propose a training-free, decision-aligned intervention that decomposes each attention head into a visual route and a text route, and estimates their token-level effects using an efficient one-forward/one-gradient approximation. These estimates reveal route conflict within heads and identify prior-dominant ones, enabling selective suppression of only the text route while keeping the visual route intact. Across five benchmarks spanning discriminative and generative settings, our method consistently reduces hallucination-related errors across models with limited impact on overall multimodal performance, while incurring a modest inference-time overhead.

cs.CV↗

A Full-Stack Performance Evaluation Infrastructure for 3D-DRAM-based LLM Accelerators

Large language models (LLMs) exhibit memory-intensive behavior during decoding, making it a key bottleneck in LLM inference. To accelerate decoding execution, hybrid-bonding-based 3D-DRAM has been adopted in LLM accelerators. While this emerging technology provides strong performance gains over existing hardware, current 3D-DRAM accelerators (3D-Accelerators) rely on closed-source evaluation tools, limiting access to publicly available performance analysis methods. Moreover, existing designs are highly customized for specific scenarios, lacking a general and reusable full-stack modeling for 3D-Accelerators across diverse usecases. To bridge this fundamental gap, we present ATLAS, the first silicon-proven Architectural Three-dimesional-DRAM-based LLM Accelerator Simulation framework. Built on commercially deployed multi-layer 3D-DRAM technology, ATLAS introduces unified abstractions for both 3D-Accelerator system architecture and programming primitives to support arbitrary LLM inference scenarios. Validation against real silicon shows that ATLAS achieves $\le$8.57% simulation error and 97.26-99.96\% correlation with measured performance. Through design space exploration with ATLAS, we demonstrate its ability to guide architecture design and distill key takeaways for both 3D-DRAM memory system and 3D-Accelerator microarchitecture across scenarios. ATLAS will be open-sourced upon publication, enabling further research on 3D-Accelerators.

cs.AR↗

High Thermal Conductivity in Back-End-of-Line Compatible AlN Thin Films

With thermal issues becoming a major challenge to the development of integrated circuits (ICs), high-thermal-conductivity (high-TC) materials are gaining interest from both the industry and academia, especially for high-density back-end-of-line (BEOL) structures. Aluminum nitride (AlN) is an insulating material with high TC, suitable for thermal management in electronic devices. Furthermore, polycrystalline AlN thin films can be deposited at BEOL-compatible low temperatures (lower than 400 C) while retaining relatively high TC, rendering AlN a promising candidate for BEOL heat dissipation. Still, AlN deposition should aim at achieving high TC on a variety of substrates used in IC processes. In this work, we obtained 600- and 1200-nm BEOL-compatible AlN thin film samples on Si, SiO, SiN, and Al2O3 substrates for structural and thermal characterizations. Specifically, time-domain thermoreflectance (TDTR) measurements revealed consistently high TC (higher than 45 W m-1 K-1) on different substrates. Moreover, finite element analysis (FEA) simulations of AlN capped on top of an indium-tin-oxide (ITO) transistor showed a reduction of up to 44% in peak device temperature. Our work provided experimental and calculational evidence for the practicality of leveraging AlN as a high-TC, BEOL-compatible heat spreader material.

cond-mat.mtrl-sci↗

Ultralow and Tunable Thermal Conductivity of Parylene C for Thermal Insulation in Advanced Packaging

Parylene C thin films have significant applications in advanced packaging of microelectronics. Their thermal properties are critical for thermal management of electronic devices. However, a unified understanding of the tunable structure and the corresponding thermal conductivity is still missing. This study investigated parylene C thin films of varying thickness and post-annealing temperatures grown via thermal chemical vapor deposition. The ultralow thermal conductivity of as-deposited parylene C measured by time domain thermoreflectance (TDTR) is 0.10 W/m-K. The thermal conductivity can be tuned by post-annealing. Significant increase in thermal conductivity is observed in the annealed samples (0.18 W/m-K) which induces melting and recrystallization. The results of XRD and polarized Raman spectroscopy show that the enhanced thermal conductivity is due to improved crystalline quality and the change in chain orientations. The measured thermal conductivities of the as-deposited and annealed films are much lower than the values predicted by the Cahill minimum thermal conductivity model, which can be explained by the diffuson-mediated minimum thermal conductivity model. Parylene C is found to possess the lowest thermal conductivity among dense low-k materials. Our work provides guidance for the structural design of ultra-low thermal conductivity polymers and corresponding thermal design of electronics.

cond-mat.mtrl-sci↗

Ion Implantation Enhanced Nucleation Facilitates Heat Transport across Atomically-Sharp Semiconductor Interfaces

Overheating is a critical bottleneck limiting the performance and reliability of next-generation high-power and high-frequency electronics. Interfacial thermal resistance constitutes a significant portion of the total thermal resistance. In this study, we report an ultrahigh thermal boundary conductance (TBC) of approximately 800 MW/m2-K at the atomically-sharp AlN-SiC interface, achieved through an ion implantation-enhanced nucleation epitaxy technique. This value is among the highest TBC values reported for semiconductor interfaces, confirmed by structural characterizations which show an ultrahigh-quality interface. Atomistic Green Function calculations reveal that elastic phonon transmission dominates the interface, with nearly half of the acoustic modes (0-15 THz) exhibiting near-unity transmission due to the atomically sharp structure. Furthermore, using high-energy-resolution electron energy loss spectroscopy, we probe vibrational properties with nanometer spatial resolution and identify unique interfacial phonon modes connecting the mismatched phonon spectra, confirmed by molecular dynamics simulations. The ultrahigh TBC is attributed to both the high elastic phonon transmission due to the high quality interfaces and the inelastic phonon scattering channel due to interfacial phonon modes. These findings not only advance the fundamental understanding of interfacial thermal transport but also provide a pathway for effective thermal management in emerging electronic devices.

cond-mat.mes-hall↗

Thermal conductance across bonded SiOx-SiOx interfaces in hybrid bonding process

Hybrid bonding is a pivotal technology for enabling three dimensional integrated circuits. Among the foremost challenges facing 3D IC implementation is thermal management, where a deep understanding of heat conduction across bonded interfaces is essential for addressing heat dissipation and reliability issues. Nevertheless, the thermal conductance of bonded dielectric-dielectric interfaces remains poorly understood. In this study, we employ the low-temperature bonding technique integral to hybrid bonding to fabricate SiO-SiO interfaces and investigate their thermal boundary conductance using time domain thermoreflectance. Structural characterizations show high quality bonded interfaces. By fitting the data with an equivalent multilayer thermal model, we establish a lower limit TBC of 150 MW/m2-K for the SiO-SiO interfaces, which corresponds to a thermal resistance lower than that of a 9.2-nm-thick dielectric layer. These findings offer valuable insights into thermal transport in hybrid-bonded structures and provide critical guidance for the thermal design of advanced packaging solutions.

cond-mat.mes-hall↗

M$^2$OE$^2$-GL: A Family of Probabilistic Load Forecasters That Scales to Massive Customers

Probabilistic load forecasting is widely studied and underpins power system planning, operation, and risk-aware decision making. Deep learning forecasters have shown strong ability to capture complex temporal and contextual patterns, achieving substantial accuracy gains. However, at the scale of thousands or even hundreds of thousands of loads in large distribution feeders, a deployment dilemma emerges: training and maintaining one model per customer is computationally and storage intensive, while using a single global model ignores distributional shifts across customer types, locations, and phases. Prior work typically focuses on single-load forecasters, global models across multiple loads, or adaptive/personalized models for relatively small settings, and rarely addresses the combined challenges of heterogeneity and scalability in large feeders. We propose M2OE2-GL, a global-to-local extension of the M2OE2 probabilistic forecaster. We first pretrain a single global M2OE2 base model across all feeder loads, then apply lightweight fine-tuning to derive a compact family of group-specific forecasters. Evaluated on realistic utility data, M2OE2-GL yields substantial error reductions while remaining scalable to very large numbers of loads.

cs.LG↗

Experimental Observation of Extremely Strong Defect-Phonon Scatterings in Semiconductor Single Crystals

The role of doping in tailoring thermal transport in semiconductors is critical for efficient thermal management in electronic devices. While the effects of doping have been extensively studied to tune electrical properties, its impact on thermal transport has not yet been thoroughly explored, particularly with respect to experimental investigations into exceptionally strong non-Rayleigh defect-phonon scattering phenomena. Herein, by combining the high-quality growth and advanced characterizations of cubic silicon carbide single crystals with well controlled boron doping, we experimentally observe anomalous strong defect-phonon scatterings, among the strongest reported in common semiconductors, that exceeds the predictions of the classic mass difference model by tens of times in magnitude. The measured thermal conductivity of doped 3C SiC match excellently with those predicted by first principle calculations in which resonant scattering of low frequency phonon is considered. Our findings not only shed light on the fundamental understanding of defect-phonon interactions and will also impact applications such as thermal management of electronics.

cond-mat.mtrl-sci↗

Thermal Conductivity of Cubic Silicon Carbide Single Crystals Heavily Doped by Nitrogen

High-purity cubic silicon carbide possesses the second-highest thermal conductivity among large-scale crystals, surpassed only by diamond, making it crucial for practical applications of thermal management. Recent theoretical studies predict that heavy doping reduces the thermal conductivity of 3C-SiC via phonon-defect and phonon-electron scattering. However, experimental evidence has been limited. In this work, we report the thermal conductivity of heavily nitrogen doped 3C SiC single crystals, grown using the top-seeded solution growth method, measured via time domain thermoreflectance. Our results show that a significant reduction (up to 30%) in thermal conductivity is observed with nitrogen doping concentrations around 1020 cm-3. A comparison with theoretical calculations indicates less intensive scatterings are observed in the measured thermal conductivity. We speculate that the electron-phonon scattering may have a smaller impact than previously anticipated or the distribution of defects are nonuniform which leads to less intensive scatterings. These findings shed light on understanding the doping effects on thermal transport in semiconductors and support further exploration of 3C SiC for thermal management in electronics.

cond-mat.mtrl-sci↗

Interfacial reaction boosts thermal conductance of room-temperature integrated semiconductor interfaces stable up to 1100 C

Overheating has emerged as a primary challenge constraining the reliability and performance of next-generation high-performance electronics, such as chiplets and (ultra)wide bandgap electronics. Advanced heterogeneous integration not only constitutes a pivotal technique for fabricating these electronics but also offers potential solutions for thermal management. This study presents the integration of high thermal conductivity semiconductors, specifically, 3C-SiC thin films and diamond substrates, through a room-temperature surface-activated bonding technique. Notably, the thermal conductivity of the 3C-SiC films is among the highest for all semiconductor films which can be integrated near room temperature with similar thicknesses. Furthermore, following annealing, the interfaces between 3C-SiC and diamond demonstrate a remarkable enhancement in thermal boundary conductance (TBC), reaching up to approximately 300%, surpassing all other grown and bonded heterointerfaces. This enhancement is attributed to interfacial reactions, specifically the transformation of amorphous silicon into SiC upon interaction with diamond, which is further corroborated by picosecond ultrasonics measurements. Subsequent to annealing at 1100 C, the achieved TBC (150 MW/m2-K) is record-high among all bonded diamond interfaces. Additionally, the visualization of large-area TBC, facilitated by femtosecond laser-based time-domain thermoreflectance measurements, shows the uniformity of the interfaces which are capable of withstanding temperatures as high as 1100 C. Our research marks a significant advancement in the realm of thermally conductive heterogeneous integration, which is promising for enhanced cooling of next-generation electronics.

cond-mat.mes-hall↗