arXiv subjects

Zengbo Wang

Publications and source records attributed to Zengbo Wang.

At least 19 recordsLinked to original sources

arXiv2026

Method for 3D printing of cubic microbubbles: fully enclosed thin-walled microcavities with ultra-high aspect ratios

A microbubble is, in essence, a fully enclosed thin-walled microcavity. Unlike spherical microbubbles formed by expansions, 3D printing enables the free definition of their geometry, allowing precise control over shape and dimensions during fabrication. However, the geometric nature of microbubbles poses significant challenges for conventional photoresist-based lithographic microfabrication due to their fragile thin-walls, enclosed hollow volumes, and high sensitivity to mechanical stresses. These characteristics prevent developer solvents from accessing the internal cavities to remove unexposed photoresist. Two-photon polymerisation (2PP) is a laser-based 3D microprinting technique capable of sub-diffraction-limited resolution, offering exceptional design freedom for fabricating complex micro-architectures in photoresists. In this study, we demonstrate a 2PP-based method that overcomes these limitations and, for the first time, enables the successful fabrication of cubic microbubbles with ultra-high-aspect-ratio thin walls and fully enclosed microcavities using high-viscosity SU-8 2050 photoresist. The optimised process parameters and structural design facilitate efficient extraction of unexposed photoresist from the cavity interior while achieving a thin-wall ultra-high aspect ratio of approximately 340:1. The hollow nature and mechanical integrity of the printed structures were experimentally confirmed using micromanipulator-based probing. The proposed method maintains excellent dimensional accuracy and significantly reduces printing time for large-scale and high-count builds in 2PP processes. Such microbubbles are fundamental building blocks for optical resonators, microelectromechanical systems (MEMS) pressure sensors, microfluidic reaction chambers, and emerging metamaterials.

physics.optics↗

arXiv2026

Shape-Dependent, Deep-Learning-Assisted Metamaterial Solid Immersion Lens (mSIL) Super-Resolution Imaging

We present the first systematic comparison of three TiO2 metamaterial solid immersion lens geometries - sub-hemispherical, super-hemispherical, and full-spherical - for label-free super-resolution imaging. Using SEM, we characterised both the cap profiles and the nanoparticle-fluid immersion at the lens-sample interface, revealing that super-hemispherical lenses achieve the deepest immersion and closest contact with sample features. Imaging experiments under wide-field and laser confocal microscopes show that this enhanced immersion drives superior resolution and contrast. In addition, we introduce a deep learning approach based on a SinCUT image translation model to establish a cross-modal mapping between SEM morphology and optical imaging response, enabling virtual optical predictions and providing a first step toward a digital twin representation of mSIL imaging behaviour. Electromagnetic simulations further confirm a direct correlation between immersion depth and far-field main lobe intensity. Our findings demonstrate that careful control of lens shape and nanoparticle-fluid penetration, together with data-driven modelling, is essential to maximise super-resolution performance in TiO2 mSILs.

physics.optics↗

arXiv2025

On-Demand Inverse Design for Narrowband Nanophotonic Structures Based on Generative Model and Tandem Network

Inverse design in nanophotonics remains challenging due to its ill-posed nature and sensitivity to input inaccuracies. We present a novel framework that combines a Conditional Variational Autoencoder (CVAE) with a tandem network, enabling robust and efficient on-demand inverse design of photonic structures. Unlike prior approaches that use CVAEs or tandem networks in isolation, our method integrates spectral adjustment and structural prediction in a unified architecture. Specifically, the CVAE adjusts the idealized target spectra, such as Lorentzian-shaped notches, making them more physically realizable and consistent with the training data distribution. This adjusted spectrum is then passed to the tandem network, which predicts the corresponding structural parameters. The framework effectively handles both narrowband (<50 nm) and highly complex spectra, while addressing the one-to-many mapping challenge inherent in inverse design. The model achieves high accuracy, and the designed spectra closely match full-wave simulation results, validating its practicality for advanced nanophotonic applications.

physics.optics↗

arXiv2025

Resolution Limit in Microsphere-Assisted Super-Resolution Microscopy

Visualization in the virtual image formed by dielectric microparticles has been shown to enable the distinction of objects that remain indistinguishable under direct observation. We perform the resolution analysis based on a full two-dimensional simulation of optical image formation taking into account the diffraction of partially coherent light on the microparticle and the objects under study. The oscillating nature of optical resolution is demonstrated depending on the size of the microparticle. The presence of strong resonances is observed in both transmission and reflection modes. It is shown that as the size of the object decreases, the optical resolution tends to the classical limit. An analytical estimate for the resolution criterion in microsphere-assisted imaging is presented.

physics.optics↗

arXiv2024

SuperNANO: Enabling Nano-Scale Laser an-ti-counterfeiting Marking and Precision Cutting with Super-Resolution Imaging

In this paper, we present a unique multi-functional super-resolution instrument, the SuperNANO system, which integrates real-time super-resolution imaging with direct laser nanofabrication capabilities. Central to the func-tionality of the SuperNANO system is its capacity for simultaneous nanoimaging and nanopatterning, enabling the creation of anti-counterfeiting markings and precision cutting with exceptional accuracy. The SuperNANO system, featuring a unibody superlens objective, achieves a resolution ranging from 50 to 320 nm. We showcase the instrument's versatility through its application in generating high-security anti-counterfeiting features on an aluminum film. These 'invisible' security features, which are nanoscale in dimension, can be crafted with arbi-trary shapes at designated locations. Moreover, the system's precision is further evidenced by its ability to cut silver nanowires to a minimum width of 50 nm. The integrated imaging and fabricating functions of the Su-perNANO make it a pivotal tool for a variety of applications, including nano trapping, sensing, cutting, weld-ing, drilling, signal enhancement, detection, and nano laser treatment.

physics.optics↗

arXiv2024

Dielectric microparticles for enhanced optical imaging: a FDTD analysis of contrast and resolution

This paper presents a comprehensive numerical analysis of super-resolution imaging using dielectric microparticles, employing the Finite-Difference Time-Domain (FDTD) method to elucidate the mechanisms that enable resolution enhancements beyond the diffraction limit. Our study demonstrates that dielectric microparticles can achieve a resolution on the order of 50 nm in the visible spectrum, surpassing traditional optical microscopy limits. By simulating the propagation of radiation through a microparticle-object system and generating optical images via a backward propagation technique, we reveal critical insights into how microparticles enhance image contrast and resolution. The study also explores the influence of various parameters, such as source coherence and particle-substrate interactions, on the image formation process. Our results not only validate the super-resolution capability of microparticle-assisted imaging but also provide a robust framework for further advancements in optical imaging technologies, with potential applications in fields requiring ultra-high-resolution visualization.

physics.optics↗

arXiv2023

Superlens-Assisted Laser Nanostructuring of Long Period Optical Fiber Gratings (LPGs) for Enhanced Refractive Index Sensing

We present an innovative method to enhance Long Period Optical Fiber Gratings (LPGs) for refractive index sensing using microsphere-assisted superlens laser nanostructuring. This technique involves self-assembling a silica microsphere monolayer on LPGs' outer surface, followed by pulsed laser irradiation to generate nanoholes (300-500 nm) forming nanohole-structured LPGs (NS-LPGs). In experiments, two nanohole densities were compared for their impact on sensing performance in sucrose and glycerin solutions. The nanostructured NS-LPGs showed improved sensitivity by 16.08% and 19.57% compared to regular LPGs, with higher nanohole density yielding greater enhancement. Importantly, the permanent nanohole structures ensure durability in harsh environments, surpassing conventional surface-coating-based LPGs. Further improvements can be achieved by refining nanostructuring density and controlling nanohole size and depth. Our work represents a notable advancement in LPG sensor engineering, prioritizing surface nanostructuring over nano-coating, promising enhanced refractive index sensing applications.

physics.optics↗

arXiv2022

Highly curved reflective W-shape and J-shape photonic hook induced by light interaction with partially coated microfluidic channels

Photonic hook (PH) is a new type of artificial self-bending beam focused by a dielectric particle-lens with a curved waist smaller than the wavelength, which has the potential to revolutionize mesoscale photonics in many applications, e.g., optical trapping, signal switching, imaging, etc. In this paper, we discover a new mechanism that the highly curved PHs can be realised by the light interaction with the fully or partially metal-coated microchannels. The generated W-shaped and J-shaped PHs have bending angles exceeding 80-degree. Compared to other PH setups, the proposed design has a larger range to flexibly control the bending angle through the coating process and can be easily integrated with the established microfluidic systems.

physics.optics↗

arXiv2022

Generation of S-shaped photonic hooks from microcylinders with engineered surface patches

Photonic hooks (PHs) are non-evanescent light beams with a highly concentrated curved optical fields. Since their discovery, PHs always have one single inflection point and thus have a hook-like structure. In this work, a new type of PHs with two inflection points and S-shaped structures (S-PHs) were reported for the first time. We theoretically studied the effects of various physical parameters on the generation of S-PHs. Furthermore, we showed that decorating particles with multiple patches can significantly enhance the curvature and length of the S-PHs. The S-PHs may have potential applications in super-resolution imaging, sub-wavelength micromachining, particle and cell manipulation, etc.

physics.optics↗

arXiv2022

Optical super-resonances in dielectric microsphere particles

Extreme field localization and giant field enhancement are often achieved by using plasmonic nanostructures and metamaterials such as strongly coupled silver nanoparticles.Dielectric particles and structures can focus light beyond the diffraction limit (photonic nanojet effect), but with much weaker strengths. Recently, we showed that dielectric microspheres could support high-order Mie resonance modes ("super resonance mode") that can generate similar level of electric field intensity enhancement as plasmonic structures on the order of 10^4 - 10^7. In this work, we aim to further advance our understanding of the super-resonance modes. New results on the effects of size parameter and refractive index on optical super-resonances across a wide parameter range and with improved numerical accuracies is presented. The results suggest that the electric field intensity enhancement could reach a record high level of 10^9-10^11 at specific conditions that surpass plasmonic enhancements. Moreover, super-resonance-enabled focusing by microsphere lens under different lighting sources (e.g., different color LEDs or lasers, halogen lamps) is investigated and compared for the first time. These results are important in understanding the super-resolution mechanism for microsphere nanoscopy and will find numerous potential applications in photonics.

physics.optics↗

arXiv2021

Near-field light-bending photonic switch: physics of switching based on three-dimensional Poynting vector analysis

Photonic hook is a high-intensity bent light focus with a proportional curvature to the wavelength of the incident light. Based on this unique light-bending phenomenon, a novel near-field photonic switch by means of a right-trapezoid dielectric Janus particle-lens embedded in the core of a planar waveguide is proposed for switching the photonic signals at two common optical communication wavelengths 1310 nm and 1550 nm by using numerical simulations. The signals at these two wavelengths can be guided to different routes according to their oppositely bent photonic hooks to realise wavelength selective switching. The switching mechanism is analysed by an in-house developed three-dimensional (3D) Poynting vector visualisation technology. It demonstrates that the 3D distribution and number of Poynting vector vortexes produced by the particle highly affect the shapes and bending directions of the photonic hooks causing the near-field switching, and multiple independent high-magnitude areas matched by the regional Poynting vector streamlines can form these photonic hooks. The corresponding mechanism can only be represented by 3D Poynting vector distributions and is being reported for the first time.

physics.optics↗

arXiv2021

Roadmap for label-free imaging with microsphere superlens and metamaterial solid immersion lens

In 2011, super-resolution imaging by microsphere superlens was emerged as a simple yet effective method to overcome the diffraction limit that limits the resolution of conventional lenses. Significant progress has since been made. Key advances including the development of scanning superlens system, metamaterial solid immersion lens (mSIL), super-resolution physics and bio-superlens will be discussed. Challenges and solutions are then discussed.

physics.optics↗

arXiv2021

Super-resolution imaging with patchy microspheres

The diffraction limit is a fundamental barrier in optical microscopy, which restricts the smallest resolvable feature size of a microscopic system. Microsphere-based microscopy has proven to be a promosing tool for challenging the diffraction limit. Nevertheless, the microspheres have a low imaging contrast in the air, which hinders the application of this technique. In this Letter, we demonstrate that this challenge can be effectively overcome by using partially Ag-plated microspheres. The deposited Ag film acts as an aperture stop that blocks a portion of the incident beam, forming a photonic hook with oblique near-field illumination. Such a photonic hook significantly enhanced imaging contrast, as experimentally verified by imaging Blu-ray disc surface and silica particle arrays.

physics.optics↗

arXiv2021

Confining photonic nanojet in a microwell on microsphere lens for highly efficient light focusing, signal amplification and quantitative detection

Dielectric microspheres or microbeads can squeeze light into the subwavelength scale via photonic nanojet (PNJ) focusing. This enables strong light-matter interactions within its focus and induces extraordinary effects such as enhancements in light emission, signal collection and various other applications. However, critical challenges exist on how to efficiently and precisely loading the studied objects into the desired location of the PNJ focusing, and subsequently measure the field and signal of interests precisely and reliably. Such technique is currently missing. We present for the first time a unique microwell-decorated microsphere lens (u-well lens), with a semi-open microwell sample compartment directly fabricated on top of the microsphere lens. The u-well lens confines PNJ in a semi-open microwell and allows passive trapping of individual micro-object into the PNJ focusing area with high efficiency and spatial accuracy. We demonstrate that individual fluorescent microsphere of different sizes can be readily introduced to the designated location with loading efficiency >70% and generates reproducible enhanced fluorescence signals with standard deviation better than that can be quantitatively measured. A comprehensive analysis on the optical properties of the u-well lens reveals the synergistic effect of field enhancement and collection efficiency on the optical enhancement. We finally employ this special microsphere lens for fluorescent-bead-based biotin concentration analysis. The results suggest a greatly enhanced sensitivity and highly improved detection limit, opening the door for its application in highly sensitive and quantitative detection.

physics.optics↗

arXiv2021

Fiber-based optical trapping of yeast cells as near-field magnifying lenses for parallel subwavelength imaging

Subwavelength imaging by microsphere lenses is a promising label-free super-resolution imaging technique. There is a growing interest to use live cells to replace the widely used non-biological microsphere lenses. In this work, we demonstrate the use of yeast cells for such imaging purpose. Using fiber-based optical trapping technique, we successfully trapped a chain of yeast cells and bring them to the vicinity of imaging objects. These yeast cells work as near-field magnifying lenses and simultaneously pick up the sub-diffraction information of the nanoscale objects under each cell and project them into the far-field. Blu-ray disc of 100 nm feature can be clearly resolved in a parallel manner by each cell, thus effectively increasing the imaging field of view and imaging efficiency. Our work will contribute to the further development of more advanced bio-superlens imaging system

physics.optics↗

arXiv2020

Photonic Lenses with Whispering Gallery Waves at Janus Particles

We show that electric field on the plane surface of truncated sphere or cylinders (so called Janus particles) have sharp resonances versus the depth of removed segment of a sphere or cylinder. These resonances are related to the excited whispering gallery waves caused by truncation. It is a new mechanism of the field localization. Optimization of this effect for cylinders permits to reach a super resolution in the line thickness what can be used for contacting optical lithography.

physics.optics↗

arXiv2020

Super-enhancement focusing of Teflon sphere

A Teflon (Polytetrafluoroethylene, PTFE) sphere can be used as a focusing lens in the applications of imaging and sensing due to its low-loss property in the terahertz (THz) band. In this paper, we analytically calculated field intensities and focusing parameters for Teflon spheres at different low-loss levels and then discovered a super-enhancement focusing effect in the spheres with particular size parameters, which can stimulate about 4000 times stronger field intensity than that for incident radiation as well as the great potential of overcoming diffraction limit despite high sensitivity to the magnitude of Teflon loss. A subsequent analysis of scattering amplitudes proved that the strong scattering of a single order mode in the internal electric or magnetic field is the main factor causing this phenomenon.

physics.optics↗

arXiv2019

Unibody microscope objective tipped with a microsphere: design, fabrication and application in subwavelength imaging

Microsphere-based subwavelength imaging technique was first demonstrated in 2011. After nearly a decade of efforts, such technique has spawned numerous interests in fields such as laser nano-machining, imaging, sensing and biological detection. For wider industrial scale application of the technique, a robust, low-cost objective lens incorporating microsphere lens is highly desired and sought by many researchers. In this work, we demonstrate a unibody microscope objective lens formed by tipping a high-index microsphere onto a Plano-Convex lens and subsequently fitting them into a conventional objective lens. We call such new objective the Plano-Convex-Microsphere (PCM) objective, which resembles the appearance and operation of an ordinary microscope objective, while providing super-resolving power in discerning subwavelength nanoscale features in air condition. The imaging performance of PCM-objective along with the working distance has been systematically investigated. With the assistance of scanning process, larger area imaging is realized. The PCM-objective can be easily adaptive to many existing microscope systems and appealing for commercialization.

physics.optics↗