arXiv subjects
Publications and source records attributed to Zekun Niu.
We propose an AI Agent tailored for link power management in multi-band systems. In S+C+L band span-level study, the agent efficiently solves various optimization objectives. In network-wide evaluation, it delivers 689.0 Tbps gain in total allocated traffic with merely 303 average interactions per power profile.
In this paper, the quasi-constant modulus (QCM) property is analyzed and leveraged in the design of nonlinearity-tolerant four-dimensional (4D) modulation formats. Accordingly, we propose a family of QCM-based quadrature amplitude modulation (QCM-QAM) constellations with high spectral efficiencies (SEs) of 9, 11, and 13 bit/4D-sym, respectively. The quasi-constant modulus design theoretically enhances tolerance to fiber nonlinearities. Meanwhile, QCM-QAM is evaluated in an unrepeatered wavelength-division multiplexing (WDM) system over both standard single-mode fiber (SSMF) and non-zero dispersion-shifted fiber (NZDSF). Across all SEs, QCM-QAM demonstrates robust nonlinear tolerance in both SSMF and NZDSF. This is evidenced by a consistent shift of the optimal launch power toward higher values and a significant improvement in effective signal-to-noise ratio (SNR). QCM-QAM also delivers generalized mutual information (GMI) gains of 0.22, 0.09, and 0.21 bit/4D-sym in SSMF, and 0.24, 0.10, and 0.22 bit/4D-sym, in NZDSF at the optimal transmission power, corresponding to the SEs of 9, 11, and 13 bit/4D-sym. Furthermore, QCM-QAM achieves transmission reach extensions of 1.6%, 0.9%, and 1.7% in SSMF, and 1.7%, 1.5%, and 1.8% in NZDSF, respectively, for the three SE levels.
Magnetometry based on diamond nitrogen-vacancy (NV) centers has been extensively studied for applications requiring diverse capabilities, spanning from nanometer spatial resolution to subpicotesla sensitivity. Among various applications, diamond magnetometers can demonstrate high sensitivity magnetic sensing within millimeter-scale size for endoscopic applications. However, the trade-off between sensitivity and spatial resolution of diamond magnetometry makes it difficult to achieve such a probe. In this study, we present a millimeter-scale rigid diamond magnetometer probe with enhanced sensitivity via optimizing the optical design. By coupling the frustum diamond with the miniaturized compound parabolic concentrator (CPC) lens, we enhance the fluorescence collection efficiency by 37% within 4 mm diameter, and the achieved sensitivity is 200 pT/Hz1/2 based on the sample with the resonance linewidth of ~8 MHz. With this verified structure, endoscopes with mm-size probe and picotesla sensitivity can be projected for surgical and industrial applications in the future.
Photonic reservoir computer (PRC) is a kind of real-time and adaptive recurrent neural network, where only weights in the readout layer require training. PRC is a promising tool to deal with the crucial issue of nonlinear equalization in optical fiber communications. Here we theoretically show a deep PRC for the nonlinear equalization of coherent signals with the format of 16- level quadrature amplitude modulation (16-QAM). The deep PRC consists of cascading injection-locked Fabry-Perot lasers with optical feedback. Both the in-phase component and the quadrature component of the 16-QAM signals are simultaneously injected into the deep PRC in parallel, based on the wavelength multiplexing of Fabry-Perot lasers. It is demonstrated that the deep PRC exhibits strong capability for the nonlinearity compensation of coherent signals. The Q factor is improved by more than 1 dB for 16-QAM signals with launch powers above 10 dBm, associated with a bit rate of 240 Gbps and a transmission distance of 50 km.
Fast and accurate waveform simulation is critical for understanding fiber channel characteristics, developing digital signal processing (DSP) technologies, optimizing optical network configurations, and advancing the optical fiber transmission system towards wideband. Deep learning (DL) has emerged as a powerful tool for waveform modeling, offering high accuracy and low complexity compared to traditional split-step Fourier method (SSFM), due to its strong nonlinear fitting capabilities and efficient parallel computation. However, most DL methods are designed for few-channel and low-rate WDM systems, leaving their scalability to wideband systems uncertain. Moreover, the lack of a standardized accuracy evaluation method and the inconsistent results between waveform errors and transmission performance errors, hinders fair comparisons of various DL schemes. In this paper, we introduce a DSP-assisted accuracy evaluation method integrated with nonlinear DSP, providing a fair benchmark for evaluating the accuracy of DL models. Using this method, we conduct a comprehensive comparison of DL schemes, ranging from simple configurations to more complex wideband setups. The feature decoupled distributed method combining with bidirectional long short-term memory achieves the better performance compared to other DL schemes. Furthermore, in scenarios with more-channel and higher-rate, the performance advantages of FDD-BiLSTM will be further improved. However, as the number of channels and symbol rates increase, the performance of FDD-BiLSTM still gradually deteriorate. We analyze these challenges from three perspectives: the more intricate linear and nonlinear effects, the higher sampling rate required for SSFM. To address these challenges, we discuss potential solutions from two aspects: incorporating more prior physical knowledge and optimizing the structure of DL models.
We utilize the Feature Decoupling Distributed (FDD) method to enhance the capability of deep learning to fit the Nonlinear Schrodinger Equation (NLSE), significantly reducing the NLSE loss compared to non decoupling model.
We propose and experimentally validate a joint estimation method for chromatic dispersion and time-frequency offset based on the fractional Fourier transform, which reduces computational complexity by more than 50% while keeping estimation accuracy.
The modeling and prediction of the ultrafast nonlinear dynamics in the optical fiber are essential for the studies of laser design, experimental optimization, and other fundamental applications. The traditional propagation modeling method based on the nonlinear Schr\"odinger equation (NLSE) has long been regarded as extremely time-consuming, especially for designing and optimizing experiments. The recurrent neural network (RNN) has been implemented as an accurate intensity prediction tool with reduced complexity and good generalization capability. However, the complexity of long grid input points and the flexibility of neural network structure should be further optimized for broader applications. Here, we propose a convolutional feature separation modeling method to predict full-field ultrafast nonlinear dynamics with low complexity and high flexibility, where the linear effects are firstly modeled by NLSE-derived methods, then a convolutional deep learning method is implemented for nonlinearity modeling. With this method, the temporal relevance of nonlinear effects is substantially shortened, and the parameters and scale of neural networks can be greatly reduced. The running time achieves a 94% reduction versus NLSE and an 87% reduction versus RNN without accuracy deterioration. In addition, the input pulse conditions, including grid point numbers, durations, peak powers, and propagation distance, can be flexibly changed during the predicting process. The results represent a remarkable improvement in the ultrafast nonlinear dynamics prediction and this work also provides novel perspectives of the feature separation modeling method for quickly and flexibly studying the nonlinear characteristics in other fields.
The modeling of optical wave propagation in optical fiber is a task of fast and accurate solving the nonlinear Schr\"odinger equation (NLSE), and can enable the optical system design, digital signal processing verification and fast waveform calculation. Traditional waveform modeling of full-time and full-frequency information is the split-step Fourier method (SSFM), which has long been regarded as challenging in long-haul wavelength division multiplexing (WDM) optical fiber communication systems because it is extremely time-consuming. Here we propose a linear-nonlinear feature decoupling distributed (FDD) waveform modeling scheme to model long-haul WDM fiber channel, where the channel linear effects are modelled by the NLSE-derived model-driven methods and the nonlinear effects are modelled by the data-driven deep learning methods. Meanwhile, the proposed scheme only focuses on one-span fiber distance fitting, and then recursively transmits the model to achieve the required transmission distance. The proposed modeling scheme is demonstrated to have high accuracy, high computing speeds, and robust generalization abilities for different optical launch powers, modulation formats, channel numbers and transmission distances. The total running time of FDD waveform modeling scheme for 41-channel 1040-km fiber transmission is only 3 minutes versus more than 2 hours using SSFM for each input condition, which achieves a 98% reduction in computing time. Considering the multi-round optimization by adjusting system parameters, the complexity reduction is significant. The results represent a remarkable improvement in nonlinear fiber modeling and open up novel perspectives for solution of NLSE-like partial differential equations and optical fiber physics problems.
In this work, a new data-driven fiber channel modeling method, generative adversarial network (GAN) is investigated to learn the distribution of fiber channel transfer function. Our investigation focuses on joint channel effects of attenuation, chromic dispersion, self-phase modulation (SPM), and amplified spontaneous emission (ASE) noise. To achieve the success of GAN for channel modeling, we modify the loss function, design the condition vector of input and address the mode collapse for the long-haul transmission. The effective architecture, parameters, and training skills of GAN are also displayed in the paper. The results show that the proposed method can learn the accurate transfer function of the fiber channel. The transmission distance of modeling can be up to 1000 km and can be extended to arbitrary distance theoretically. Moreover, GAN shows robust generalization abilities under different optical launch powers, modulation formats, and input signal distributions. Comparing the complexity of GAN with the split-step Fourier method (SSFM), the total multiplication number is only 2% of SSFM and the running time is less than 0.1 seconds for 1000-km transmission, versus 400 seconds using the SSFM under the same hardware and software conditions, which highlights the remarkable reduction in complexity of the fiber channel modeling.