arXiv subjects

Zehua Chen

Publications and source records attributed to Zehua Chen.

49 records · Page 3Linked to original sources

arXiv2022

Defects in Halide Perovskites: Does It Help to Switch from 3D to 2D?

Ruddlesden-Popper hybrid iodide 2D perovskites are put forward as stable alternatives to their 3D counterparts. Using first-principles calculations, we demonstrate that equilibrium concentrations of point defects in the 2D perovskites PEA$_2$PbI$_4$, BA$_2$PbI$_4$, and PEA$_2$SnI$_4$ (PEA: phenethyl ammonium, BA: butylammonium), are much lower than in comparable 3D perovskites. Bonding disruptions by defects are more detrimental in 2D than in 3D networks, making defect formation energetically more costly. The stability of 2D Sn iodide perovskites can be further enhanced by alloying with Pb. Should, however, point defects emerge in sizable concentrations as a result of nonequilibrium growth conditions, for instance, then those defects hamper the optoelectronic performance of the 2D perovskites, as they introduce deep traps. We suggest that trap levels are responsible for the broad sub-bandgap emission in 2D perovskites observed in experiments.

cond-mat.mtrl-sci↗

arXiv2022

Light-tunable three-phase coexistence in mixed halide perovskites

Mixed iodine-bromine perovskites used in solar cells undergo below a critical temperature an intrinsic demixing into phases with different iodine-bromine compositions. In addition, under illumination they show nucleation of an iodine-rich phase. We predict from thermodynamic considerations that in mixed iodine-bromine perovskites like MAPb(I$_{1-x}$Br$_x$)$_3$ the interplay of these effects can lead to coexistence of a bromine-rich, iodine-rich, and nearly iodine-pure nucleated phase. This three-phase coexistence occurs in a region in the composition-temperature phase diagram near the critical point for intrinsic demixing. We investigate the hysteresis in the evolution of this coexistence when temperature or illumination intensity are cycled. Depending on the particular way the coexistence is established, nearly iodine-pure nuclei should form either in the iodine-rich phase only or both in the bromine-rich and iodine-rich phases. Experimental verification of this fundamentally novel type of light-tunable three-phase coexistence should be possible by a combination of absorption and photoluminescence experiments.

cond-mat.mtrl-sci↗

arXiv2022

Multireference Density Functional Theory for Describing Ground and Excited States with Renormalized Singles

We applied renormalized singles (RS) in the multireference density functional theory (DFT) to calculate accurate energies of ground and excited states. The multireference DFT approach determines the total energy of the $N$-electron system as the sum of the ($N-2$)-electron energy from a density functional approximation (DFA) and the two-electron addition energies from the particle-particle Tamm-Dancoff approximation (ppTDA), naturally including multireference description. The ppTDA@RS-DFA approach uses the RS Hamiltonian capturing all singles contributions in calculating two-electron addition energies, and its total energy is optimized with the optimized effective potential method. It significantly improves the original ppTDA@DFA. For ground states, ppTDA@RS-DFA properly describes dissociation curves tested and the double bond rotation of ethylene. For excited states, ppTDA@RS-DFA provides accurate excitation energies and largely eliminates the DFA dependence. ppTDA@RS-DFA thus provides an efficient multireference approach to systems with static correlation.

physics.chem-ph↗

arXiv2022

InferGrad: Improving Diffusion Models for Vocoder by Considering Inference in Training

Denoising diffusion probabilistic models (diffusion models for short) require a large number of iterations in inference to achieve the generation quality that matches or surpasses the state-of-the-art generative models, which invariably results in slow inference speed. Previous approaches aim to optimize the choice of inference schedule over a few iterations to speed up inference. However, this results in reduced generation quality, mainly because the inference process is optimized separately, without jointly optimizing with the training process. In this paper, we propose InferGrad, a diffusion model for vocoder that incorporates inference process into training, to reduce the inference iterations while maintaining high generation quality. More specifically, during training, we generate data from random noise through a reverse process under inference schedules with a few iterations, and impose a loss to minimize the gap between the generated and ground-truth data samples. Then, unlike existing approaches, the training of InferGrad considers the inference process. The advantages of InferGrad are demonstrated through experiments on the LJSpeech dataset showing that InferGrad achieves better voice quality than the baseline WaveGrad under same conditions while maintaining the same voice quality as the baseline but with $3$x speedup ($2$ iterations for InferGrad vs $6$ iterations for WaveGrad).

eess.AS↗

arXiv2021

LibSC: Library for Scaling Correction Methods in Density Functional Theory

In recent years, a series of scaling correction (SC) methods have been developed in the Yang laboratory to reduce and eliminate the delocalization error, which is an intrinsic and systematic error existing in conventional density functional approximations (DFAs) within density functional theory (DFT). Based on extensive numerical results, the SC methods have been demonstrated to be capable of reducing the delocalization error effectively and producing accurate descriptions for many critical and challenging problems, including the fundamental gap, photoemission spectroscopy, charge transfer excitations and polarizability. In the development of SC methods, the SC methods were mainly implemented in the QM4D package that was developed in the Yang laboratory for research development. The heavy dependency on the QM4D package hinders the SC methods from access by researchers for broad applications. In this work, we developed a reliable and efficient implementation , LibSC for the global scaling correction (GSC) method and the localized orbital scaling correction (LOSC) method. LibSC will serve as a light-weight and open-source library that can be easily accessed by the quantum chemistry community. The implementation of LibSC is carefully modularized to provide the essential functionalities for conducting calculations of the SC methods. In addition, LibSC provides simple and consistent interfaces to support multiple popular programing languages, including C, C++ and Python. In addition to the development of the library, we also integrated LibSC with two popular and open-source quantum chemistry packages, the Psi4 package and the PySCF package, which provides immediate access for general users to perform calculations with SC methods.

physics.chem-ph↗

arXiv2021

The Exact Second Order Corrections and Accurate Quasiparticle Energy Calculations in Density Functional Theory

We develop a second order correction to commonly used density functional approximations (DFA) to eliminate the systematic delocalization error. The method, based on the previously developed global scaling correction (GSC), is an exact quadratic correction to the DFA for the fractional charge behavior and uses the analytical second derivatives of the total energy with respect to fractional occupation numbers of the canonical molecular orbitals. For small and medium-size molecules, this correction leads to ground-state orbital energies that are highly accurate approximation to the corresponding quasiparticle energies. It provides excellent predictions of ionization potentials, electron affinities, photoemission spectrum and photoexcitation energies beyond previous approximate second order approaches, thus showing potential for broad applications in computational spectroscopy.

physics.chem-ph↗

arXiv2021

A Granular Sieving Algorithm for Deterministic Global Optimization

A gradient-free deterministic method is developed to solve global optimization problems for Lipschitz continuous functions defined in arbitrary path-wise connected compact sets in Euclidean spaces. The method can be regarded as granular sieving with synchronous analysis in both the domain and range of the objective function. With straightforward mathematical formulation applicable to both univariate and multivariate objective functions, the global minimum value and all the global minimizers are located through two decreasing sequences of compact sets in, respectively, the domain and range spaces. The algorithm is easy to implement with moderate computational cost. The method is tested against extensive benchmark functions in the literature. The experimental results show remarkable effectiveness and applicability of the algorithm.

math.OC↗

arXiv2021

Renormalized Singles Green's Function in the T-Matrix Approximation for Accurate Quasiparticle Energy Calculation

We combine the renormalized singles (RS) Green's function with the T-Matrix approximation for the single-particle Green's function to compute quasiparticle energies for valence and core states of molecular systems. The $G_{\text{RS}}T_0$ method uses the RS Green's function that incorporates singles contributions as the initial Green's function. The $G_{\text{RS}}T_{\text{RS}}$ method further calculates the generalized effective interaction with the RS Green's function by using RS eigenvalues in the T-Matrix calculation through the particle-particle random phase approximation. The $G_{\text{RS}}T_{\text{RS}}$ method provides significant improvements over the one-shot T-Matrix method $G_0T_0$ as demonstrated in calculations for GW100 and CORE65 test sets. It also systematically eliminates the dependence of $G_{0}T_{0}$ on the choice of density functional approximations (DFAs). For valence states, the $G_{\text{RS}}T_{\text{RS}}$ method provides an excellent accuracy, which is better than $G_0T_0$ with Hartree-Fock (HF) or other DFAs. For core states, the $G_{\text{RS}}T_{\text{RS}}$ method correctly identifies desired peaks in the spectral function and significantly outperforms $G_0T_0$ on core level binding energies (CLBEs) and relative CLBEs, with any commonly used DFAs.

physics.chem-ph↗

arXiv2021

A-FMI: Learning Attributions from Deep Networks via Feature Map Importance

Gradient-based attribution methods can aid in the understanding of convolutional neural networks (CNNs). However, the redundancy of attribution features and the gradient saturation problem, which weaken the ability to identify significant features and cause an explanation focus shift, are challenges that attribution methods still face. In this work, we propose: 1) an essential characteristic, Strong Relevance, when selecting attribution features; 2) a new concept, feature map importance (FMI), to refine the contribution of each feature map, which is faithful to the CNN model; and 3) a novel attribution method via FMI, termed A-FMI, to address the gradient saturation problem, which couples the target image with a reference image, and assigns the FMI to the difference-from-reference at the granularity of feature map. Through visual inspections and qualitative evaluations on the ImageNet dataset, we show the compelling advantages of A-FMI on its faithfulness, insensitivity to the choice of reference, class discriminability, and superior explanation performance compared with popular attribution methods across varying CNN architectures.

cs.CV↗

arXiv2020

Self-consistent calculation of localized orbital scaling correction for correct electron densities and energy level alignment in density functional theory

The recently developed localized orbital scaling correction (LOSC) method shows the ability to systematically and size-consistently reduce the delocalization error existing in conventional density functional approximations (DFAs). Applying LOSC to conventional DFAs (LOSC-DFAs) gives much improvement for the description of related properties, including band gaps, total energies and photoemission spectra. However, concern and issue remain: the application of LOSC to DFAs is mainly through a post self-consistent field (SCF) manner, and few results from applying LOSC to DFAs with a SCF manner have been reported. The reason is the originally proposed SCF approach for SCF-LOSC calculation uses an approximate Hamiltonian and encounters convergence problems easily in practice. In this work, we develop a new SCF approach with a correct Hamiltonian and achieve reliable SCF-LOSC calculations. We demonstrate the capability of the new SCF approach for SCF-LOSC to correctly describe the electron densities, total energies and energy level alignment for the molecular dissociation process, while conventional DFAs or LOSC-DFAs with post-SCF calculations show large errors. This work demonstrates that the new SCF approach for SCF-LOSC would be a promising method to study problems for correct electron densities and energy level alignment in large systems.

physics.chem-ph↗

arXiv2011

Selection Consistency of EBIC for GLIM with Non-canonical Links and Diverging Number of Parameters

In this article, we investigate the properties of the EBIC in variable selection for generalized linear models with non-canonical links and diverging number of parameters in ultra-high dimensional feature space. The selection consistency of the EBIC in this situation is established under moderate conditions. The finite sample performance of the EBIC coupled with a forward selection procedure is demonstrated through simulation studies and a real data analysis.

math.ST↗

arXiv2011

Sequential Lasso for feature selection with ultra-high dimensional feature space

We propose a novel approach, Sequential Lasso, for feature selection in linear regression models with ultra-high dimensional feature spaces. We investigate in this article the asymptotic properties of Sequential Lasso and establish its selection consistency. Like other sequential methods, the implementation of Sequential Lasso is not limited by the dimensionality of the feature space. It has advantages over other sequential methods. The simulation studies comparing Sequential Lasso with other sequential methods are reported.

stat.ME↗

arXiv2011

Extended BIC for linear regression models with diverging number of relevant features and high or ultra-high feature spaces

In many conventional scientific investigations with high or ultra-high dimensional feature spaces, the relevant features, though sparse, are large in number compared with classical statistical problems, and the magnitude of their effects tapers off. It is reasonable to model the number of relevant features as a diverging sequence when sample size increases. In this article, we investigate the properties of the extended Bayes information criterion (EBIC) (Chen and Chen, 2008) for feature selection in linear regression models with diverging number of relevant features in high or ultra-high dimensional feature spaces. The selection consistency of the EBIC in this situation is established. The application of EBIC to feature selection is considered in a two-stage feature selection procedure. Simulation studies are conducted to demonstrate the performance of the EBIC together with the two-stage feature selection procedure in finite sample cases.

math.ST↗