arXiv Science⌕ Search

arXiv subjects

Zaichen Zhang

Publications and source records attributed to Zaichen Zhang.

At least 19 recordsLinked to original sources

Optimal Distributed Similarity Estimation of Quantum Channels

We study the query complexity of estimating the similarity of two unknown quantum channels available at separated devices. For channels $\mathcal{E}$ and $\mathcal{F}$ on a $d$-dimensional system, the target functional is the normalized Choi overlap ${\rm Tr}[J_{\mathcal{E}} J_{\mathcal{F}}]/d^2$, where $J_{\mathcal{E}}$ and $J_{\mathcal{F}}$ are unnormalized Choi operators. We call this task \emph{distributed similarity estimation of quantum channels} (DSEC). Our main result is a tight characterization: estimating this overlap to additive error $\varepsilon$ with constant success probability requires and is achievable with \begin{align*} Θ\!\left(\max\left\{\frac{\sqrt d}{\varepsilon},\frac{1}{\varepsilon^2}\right\}\right) \end{align*} queries to each channel. The lower bound holds even for the most general model considered here, allowing arbitrary ancillas, coherent adaptive access, quantum memory within each laboratory, and multi-round classical communication. The dimension-dependent term follows from a shared-versus-independent Haar-unitary testing problem, while the $\varepsilon$-dependence is obtained through a random-phase channel construction. Conversely, we give a non-adaptive, ancilla-free, incoherent randomized-measurement protocol for arbitrary channels that attains the same scaling. The protocol uses only shared classical randomness to coordinate local state preparations and measurement bases. For unitary channels, our protocol reduces the dimension-dependent upper bound from $d/\varepsilon$ for independent coherent shadows to $\sqrt d/\varepsilon$. These results identify the optimal information-theoretic cost of distributed Choi overlap estimation and clarify the role of public classical randomness in distributed quantum channel learning.

quant-ph↗

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

cs.IT↗

Embodied AI for Radio Mapping: From Solo to Swarm

Radio maps provide spatial knowledge of wireless environments to assess coverage, manage spectrum use, and support connectivity-aware mobility. Recent advances in embodied intelligence (EI) offer a promising approach to radio map reconstruction by enabling agents to perceive the environment and autonomously adjust their survey paths toward safe, reachable locations. However, a single agent remains constrained by limited endurance and onboard computing capacity, limiting measurement collection and reconstruction performance. Swarm cooperation can support more efficient radio mapping over larger areas by sharing observations and coordinating members' sampling. This article first explores the capabilities and applications of cooperative embodied agents. A cooperative radio map reconstruction framework is then presented, together with its key enabling techniques. Case study results illustrate how scene perception supports access to informative sampling locations and how air--ground cooperation improves reconstruction through complementary measurements and mobile support. The article concludes with open challenges and future research directions for reliable and efficient embodied cooperative radio mapping in complex environments.

eess.SP↗

Distributed Inner-Product Estimation for Continuous-Variable Quantum States

Distributed inner product estimation (DIPE) is a fundamental task in quantum information, aiming to estimate the inner product between two unknown quantum states prepared on distributed quantum platforms. For multimode continuous-variable (CV) systems, the infinite-dimensional Hilbert space poses an additional challenge. In this work, we develop a CV-DIPE protocol using only local homodyne measurements at shared phase settings and classical communication. Under a known bound on the mean energy per mode, we derive explicit finite-sample guarantees and sufficient copy counts for estimating the full inner product to prescribed accuracy and confidence. The energy constraint yields an inverse-square truncation-bias bound, while Gaussian structure strengthens the tail control to exponential decay and improves the resulting accuracy scaling. Numerical simulations with Gaussian and non-Gaussian states illustrate the balance between truncation bias and statistical error and its dependence on mode number and energy. Our results enable independent CV platforms to benchmark their state preparations against one another, even when neither state admits a tractable classical description.

quant-ph↗

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

cs.IT↗

Capacity Analysis and Joint Gaussian Beam Pattern Optimization for Positioning-Assisted Communications

Positioning-assisted beamforming is a novel enabling technology for massive multiple-input multiple-output in modern wireless communications, as it provides reliable beam steering without requiring explicit channel state information. However, the channel capacity analysis under positioning error remains mathematically intractable, which limits both performance characterization and beamforming design. In this work, we derive instantaneous and ergodic channel capacity approximations in closed forms for both two-dimensional and three-dimensional positioning-assisted beamforming systems. Based on the new expressions, we provide closed-form optimal joint Gaussian beam pattern that maximizes the asymptotic ergodic capacity. Numerical results verify the theoretical capacity expressions and the optimal beam pattern. The derived expressions enable efficient beam design to maximize channel capacity and provide a theoretical basis for positioning-assisted beamforming design.

cs.IT↗

Spatial-Code-Domain Grouped Index Modulation: Fluid-Antenna-Assisted System Design and BER Performance Analysis

Fluid antenna systems (FASs) provide reconfigurable spatial resources within compact apertures. In this paper, we introduce code-domain grouped index modulation (CGIM) and its spatial-code-domain extension, termed SCGIM, for FA-assisted transceivers. CGIM partitions the available orthogonal spreading codes into multiple subsets and jointly maps information onto their in-phase and quadrature indices and constellation symbols. In an Rx-FAS-assisted single-input multiple-output (SIMO) link, group-wise despreading separates the orthogonal code groups for parallel detection, while receive-port selection provides spatial diversity. SCGIM further associates interleaved Tx-FA port subsets with the code subsets, with the Tx-FAS conveying spatial-index information and the Rx-FAS providing selection diversity in a multiple-input multiple-output (MIMO) link. For SCGIM, we develop maximum-likelihood (ML), staged greedy (GD), and cross-domain index message-passing (CD-IMPD) detectors. CD-IMPD exchanges soft information over a cycle-free factor graph to account for the coupling between the spatial and code indices, requiring only one inward and one outward message pass. For CGIM, the BER is derived from the joint decision regions of the despread-domain observations and averaged over the Rx-FAS selected-gain distribution under Rayleigh, Nakagami-m, and additive white Gaussian noise channels. For SCGIM, an average-BER approximation is derived from a full-pair union bound using the selected-gain density ratio and exponentially tilted quadratic-form Laplace transforms. Simulation results validate the BER analysis and show that the proposed schemes achieve lower BER and higher throughput than the considered IM schemes, while CD-IMPD achieves near-ML BER performance with lower detection complexity.

cs.IT↗

UAV Fluid-Antenna Channel Acquisition under Intra-Scan Channel Aging

Sequential sounding in UAV fluid-antenna systems (FASs) provides additional spatial information but delays transmission, causing earlier channel observations to age. This paper addresses the resulting information--freshness tradeoff by jointly determining where to probe and when to stop under blockwise hardware constraints. A dynamic Karhunen--Loève estimator aligns asynchronous measurements with the transmission state, covariance information gain selects feasible probe locations, and an age-discount identity with a local one-more-slot condition characterizes the covariance-level balance between information and freshness. Paired simulations show that temporal alignment recovers most of the lower-tail reliability lost by static stacking, covariance-aware probing ranks highest numerically among the evaluated policies, and optimized one-slot sounding becomes statistically competitive with two-slot alternatives at the highest tested mobility. Within the evaluated schedule family, increasing mobility shifts the competitive operating region toward shorter scans, supporting joint probe-placement and sounding-duration design.

cs.IT↗

Code-Domain Grouped Index Modulation for Spectrally Efficient Spread-Spectrum Communications

Efficient exploitation of spreading resources is important for improving the transmission efficiency of spread-spectrum communications. Code index modulation (CIM) conveys additional information through spreading-code indices without requiring extra radio-frequency chains. The fixed number of code-index branches in existing CIM schemes limits information allocation between the code-index and modulation-symbol domains as the target rate increases. This paper proposes code-domain grouped index modulation (CGIM), which partitions an orthogonal spreading-code bank into multiple groups and maps the in-phase and quadrature components of one quadrature amplitude modulation (QAM) symbol in each group onto two independent code indices. Group-wise despreading enables parallel detection. Group-wise maximum-likelihood (ML) and low-complexity greedy detection (GD) are developed, with both achieving joint ML decisions under the stated conditions. A pairwise error probability (PEP)-based bit error rate (BER) analysis is derived for Rayleigh and Nakagami-$m$ fading, with additive white Gaussian noise (AWGN) as a benchmark. Numerical results show that CGIM achieves better BER performance than traditional CIM benchmark schemes at the same transmission rate, owing to a more balanced distribution of information bits between the code-index and modulation-symbol domains.

cs.IT↗

Finite-blocklength Fluid Antenna Systems

This paper investigates fluid antenna systems (FASs) subject to finite-blocklength (FBL) constraints, motivated by the strict reliability-latency and ultra-massive connectivity requirements of future wireless networks. While FAS performance has been widely studied in the asymptotic regime, its behavior under FBL remains largely unexplored. Our objective is to develop a unified set of analytical tools for evaluating FASs under FBL that remains applicable across different spatial-correlation models. First, to establish accurate benchmarks for non-orthogonal finite-length user signature design, we characterize both the average and the worst-case correlation coefficients via extreme value theory (EVT) and derive closed-form predictions of the achievable correlation levels. Second, taking block error rate (BLER) as the fundamental FBL metric, we study joint detection and decoding in FAS-assisted links and derive a closed-form BLER expression that is universally applicable across channel models. Additionally, we revisit outage probability (OP) in the FBL regime and obtain tractable OP characterizations for both FASs and conventional multiple fixed-position antenna (FPA) systems. In order to reduce the computational burden for multi-fold integrals in correlated fading models, we further propose a Taylor-expansion-assisted mean value theorem for integrals (MVTI), thus enabling efficient performance evaluation with marginal accuracy loss. Numerical results validate the analysis and reveal that even single-antenna FASs can have superior spatial diversity relative to conventional multi-FPA systems. Moreover, under both FBL and interference-limited environments, FASs provide improved energy, spectral, and hardware efficiencies, hence highlighting FAS as a promising enabler for next-generation wireless networks.

cs.IT↗

Fluid Antenna Channel Reconstruction with Non-Negative Least Square Detector

Reconstructing the full-aperture channel of a fluid antenna system (FAS) from a few activated ports requires inferring unobserved responses from limited spatial samples. This paper proposes a covariance-domain FAS channel-reconstruction method based on nonnegative least squares (NNLS). A nonuniform port arrangement constructs a difference coarray with an enlarged aperture. Vectorizing the sample covariance maps the physical array to a virtual steering dictionary, and the resulting complex covariance-fitting model is recast as a strictly equivalent real-valued NNLS problem. A projected-gradient iteration initialized at zero estimates the nonnegative angular-occurrence coefficients, and the L_s strongest well-separated peaks yield the angles of arrival (AoAs). Simulations show that the proposed FAS-NNLS estimator exploits the enlarged virtual aperture and achieves lower AoA mean squared errors than uniform linear array (ULA) multiple signal classification (ULA-MUSIC) and ULA estimation of signal parameters via rotational invariance techniques (ULA-ESPRIT). Its non-line-of-sight (NLoS) path accuracy matches FAS covariance matching pursuit, while its line-of-sight (LoS) estimation is significantly improved.

eess.SP↗

Fluid-Antenna-Assisted Distributed Joint Decoding for Cell-Free Massive MIMO Unsourced Random Access

Unsourced random access (URA) supports massive sporadic connectivity but remains limited by multiuser interference, distributed channel uncertainty, and local fading. This paper proposes a fluid-antenna-assisted distributed joint decoder for cell-free massive MIMO URA. Single-radio-frequencychain access points sequentially sound correlated ports; the central processor then performs correlation-aware expectationmaximization approximate message passing, selects one common payload port per access point, and combines MIMO iterative Gaussian approximation with full-packet channel re-estimation and successive interference cancellation. Fixed-port ablations confirm the complementary benefits of distributed reception, reestimation, and iterative cancellation, while fluid-antenna simulations show improved average and lower-tail received power over fixed-port reception. The framework provides a feasible integration of fluid antennas and cell-free URA and motivates end-to-end evaluation under pilot collisions and switching overhead.

cs.IT↗

Fluid Antenna Array-Inspired Location-Posterior-Driven Subarray Sizing and Power Control for Two-Hop AF UAV Relaying

This paper develops fluid antenna array (FAA)-inspired subarray sizing and transmit-power design for a two-hop amplify-and-forward (AF) unmanned aerial vehicle (UAV) relay using progressively contracting user-location posteriors. A contiguous reconfigurable subarray is shared by first-hop reception and second-hop forwarding, such that its active size jointly determines the receive gain, forwarding gain, and beamwidth. By adaptively controlling the effective aperture, the proposed design exploits geometric reconfigurability to balance array gain against pointing robustness under location uncertainty. Projecting the position covariance onto the array direction yields a closed-form direction-limited size inversely proportional to directional uncertainty. Posterior samples are propagated through the two-hop rate model, and the subarray size and transmit power are then selected to minimize UAV power subject to a worst-user lower-tail rate requirement and hardware power limits. The planned configuration is further audited over instantaneous two-hop Rician channels at the true user positions. At t = 8 s, the proposed design saves 3.17 dB over full-array narrow-beam transmission on paired feasible geometries and achieves 60.0% service success at a 0.15-W budget, compared with 43.2% for a fixed eight-element subarray.

cs.IT↗

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

cs.IT↗

Off-Grid Position Optimization under Mutual Coupling in Fluid Antenna Arrays

Fluid antenna arrays exploit continuous antenna repositioning within a finite aperture to provide geometry diversity beyond grid-constrained port selection. Every displacement, however, changes both the radiation response and the multiport mutual-impedance network, coupling geometry optimization with the source-voltage constraint. This paper develops an electromagnetic-aware (EM-aware) beamforming framework for planar fluid antenna arrays. Phase retrieval converts an amplitude-only shaped-beam specification into an aperture-compatible complex target, and an EM-aware orthogonal matching pursuit (OMP) method selects grid-constrained initial antenna positions. Continuous refinement then alternates exact voltage-constrained current optimization with movement-constrained projected adaptive moment estimation (Adam) updates of all physical antenna positions. Across independently perturbed symmetric dual-beam targets, the proposed method consistently improves the average mainlobe signal-to-noise ratio (SNR) and reduces the peak sidelobe level (PSLL) over a uniform array and discrete port selection.

cs.IT↗

Impedance-Aware Zonal Port Activation for Fluid Antenna Arrays

Fluid antenna array (FAA) activation jointly determines the effective multi-user channel for precoding and the sparse physical aperture. Channel-oriented selection can concentrate high-gain ports and erode aperture quality, whereas geometry-oriented selection does not adapt to instantaneous channel state information (CSI). This paper formulates finite-port FAA activation as a rate--aperture--feasibility problem under an exact RF-chain budget. We propose impedance-aware zonal port activation (IA-ZPA), which couples compact CSI-conditioned port scoring with a checkerboard feasibility projection and inference-time mutual-impedance-aware selection. The learned scorer ranks ports, while the deterministic rule fixes the active aperture; a separate current-domain RZF backend then evaluates source-drive feasibility. Under a common induced-EMF protocol, IA-ZPA attains the largest constrained rate among the methods satisfying the prescribed mean-PSLL target with a substantially lower decision time than greedy selection.

cs.IT↗

EM-Guided Graph Learning for Fluid Antenna Beamforming under Current-Domain Constraints

Fluid antenna arrays (FAAs) reconfigure a finite set of radiating ports within a prescribed aperture. In compact apertures, however, channel-driven placement may cluster ports, strengthen mutual coupling, degrade radiation conditioning, increase source-voltage demand, and produce uneven current loading. This paper studies downlink multi-user beamforming with jointly optimized port placement and current-domain transmission. An electromagnetic-guided graph network predicts port layouts from channel observations and refines them using geometric and mutual-impedance information. The training objective jointly considers communication performance and electromagnetic feasibility, while a common evaluation procedure is applied to all methods. The results show that, under a common feasibility standard, the proposed method provides a controllable tradeoff among communication rate, current loading, and configuration latency.

cs.IT↗

Learned Blockwise Port Activation for Real Time Beamforming in Fluid Antenna Arrays

Fluid antenna arrays (FAAs), support multiuser downlink transmission by activating a subset of reconfigurable ports. The activation mask jointly determines the effective channel and the sparse radiating aperture, which requires a balance among sum rate, sidelobe suppression, hardware constraints, and online complexity. Channel driven selection can cluster active ports and increase sidelobes, whereas sidelobe oriented synthesis is typically channel independent and can sacrifice sum rate. This paper proposes learned blockwise port activation (L-BPA), for real time sidelobe aware FAA downlink beamforming. L-BPA activates a fixed number of ports in each aperture block, which supports grouped switching hardware and limits port clustering. A lightweight convolutional network scores ports using multiuser channel features, port coordinates, and user power statistics. Training combines blockwise straight through masks with a differentiable peak sidelobe level (PSLL), surrogate. During inference, learned scores are combined with multiscale geometric repulsion, followed by regularized zero forcing precoding over the reduced effective channel. L-BPA reduces the average PSLL by 3.26 dB relative to uniform sparse activation while achieving a slightly higher sum rate. It also reduces the PSLL by 8.13 dB and 10.10 dB relative to greedy and gain based selection, respectively, without iterative online search.

cs.IT↗