arXiv subjects

Yves Colombe

Publications and source records attributed to Yves Colombe.

At least 19 recordsLinked to original sources

arXiv2026

Demonstration of transport in an ion trap design for two-dimensional lattices

Microfabricated ion trap chips are at the core of some of the most advanced quantum computers. How a large number of ions is arranged and controlled on an ion trap chip depends on the chosen trap architecture. One such architecture is the quantum spring array (QSA). In the QSA architecture, ion chains are arranged in a two-dimensional lattice and interact with ion chains in neighboring sites in the radial and axial directions of the respective chain. This interaction, or coupling, is mediated by the Coulomb force while keeping ions in separate trapping sites, and scales inversely with the third power of the separation. The capability to control the distance between ions in the lattice is thus essential. In previous works, the radial separation between ions was tuned by controlling the rf pseudo-potential, which revealed to be experimentally challenging to realize while maintaining low heating rates. In this work, we present an ion trap chip design that allows tuning of the radial distance between ions using only dc voltages. The radial transport is executed between different interaction zones, designated for quantum operations, through specifically designed transition zones. A prototype of this type of ion trap chip was microfabricated on fused silica substrate. Its functionality is characterized by demonstrating dc-controlled radial transport of a single ion through a transition zone and measuring stray fields and ion heating rates in the center of the trap. Moreover, the fabrication of a multi-metal layer version of such a trap is presented as a scaling path for the presented chip design.

quant-ph↗

arXiv2024

Demonstration of two-dimensional connectivity for a scalable error-corrected ion-trap quantum processor architecture

A major hurdle for building a large-scale quantum computer is increasing the number of qubits while maintaining connectivity between them. In trapped-ion devices, this connectivity can be achieved by moving subregisters consisting of a few ions across the processor. Here, we focus on an architecture, which we refer to as the Quantum Spring Array (QSA), that is based on a rectangular two-dimensional lattice of linear strings of ions. Connectivity between adjacent ion strings can be controlled by adjusting their separation. This requires control of trapping potentials along two directions, one along the axis of the ion string and one radial to it. In this work, we investigate key elements of the QSA architecture along both directions: We show that the coupling rate between neighboring lattice sites increases with the number of ions per site and the motion of the coupled system can be resilient to electrical noise, both being key requisites for fast and high-fidelity quantum gate operations. The coherence of the coupling is assessed and an entangling gate between qubits stored in radially separated trapping regions is demonstrated. Moreover, we demonstrate control over radio-frequency signals to adjust the radial separation, and thus the coupling rate, between strings. We further present constructions for the implementation of parallelized, transversal gate operations, and map the QSA architecture to code primitives for fault-tolerant quantum error correction, providing a step towards a quantum processor architecture that is optimized for large-scale operation.

quant-ph↗

arXiv2024

Femtosecond laser written waveguides in sapphire for visible light delivery

A promising solution for scalable integrated optics of trapped-ion quantum processors are curved waveguides guiding visible light within sapphire bulk material. To the best of our knowledge, no curved waveguides were investigated in sapphire so far, and no measurements of waveguides with visible light in undoped planar sapphire substrates were reported. Here, we demonstrate femtosecond laser writing of depressed cladding waveguides in sapphire. Laser parameters, such as pulse energy, pulse duration, and repetition rate, as well as waveguide geometry parameters, were optimized to guide 728 nm light. This resulted in single-mode waveguides with a propagation loss of 1.9(3) dB/cm. The investigation of curved waveguides showed a sharp increase in total loss for curvature radii below 15 mm. Our results demonstrate the potential of femtosecond laser writing as a powerful technique for creating integrated optical waveguides in the volume of sapphire substrates. Such waveguides could be a building block for integrated optics in trapped-ion quantum processors.

physics.optics↗

arXiv2021

Electric field noise in a high-temperature superconducting surface ion trap

Scaling up trapped-ion quantum computers requires new trap materials to be explored. Here, we present experiments with a surface ion trap made from the high-temperature superconductor YBCO, a promising material for future trap designs. We show that voltage noise from superconducting electrode leads is negligible within the sensitivity $S_V=9\times 10^{-20}\,\mathrm{V}^2\mathrm{Hz}^{-1}$ of our setup, and for lead dimensions typical for advanced trap designs. Furthermore, we investigate the frequency and temperature dependence of electric field noise above a YBCO surface. We find a $1/f$ spectral dependence of the noise and a non-trivial temperature dependence, with a plateau in the noise stretching over roughly $60\,\mathrm{K}$. The onset of the plateau coincides with the superconducting transition, indicating a connection between the dominant noise and the YBCO trap material. We exclude the YBCO bulk as origin of the noise and suggest further experiments to decide between the two remaining options explaining the observed temperature dependence: noise screening within the superconducting phase, or surface noise activated by the YBCO bulk through some unknown mechanism.

quant-ph↗

arXiv2020

The Panopticon device: an integrated Paul-trap-hemispherical mirror system for quantum optics

We present the design and construction of a new experimental apparatus for the trapping of single Ba$^+$ ions in the center of curvature of an optical-quality hemispherical mirror. We describe the layout, fabrication and integration of the full setup, consisting of a high-optical access monolithic `3D-printed' Paul trap, the hemispherical mirror, a diffraction-limited in-vacuum lens (NA = 0.7) for collection of atomic fluorescence and a state-of-the art ultra-high vacuum vessel. This new apparatus enables the study of quantum electrodynamics effects such as strong inhibition and enhancement of spontaneous emission, and achieves a collection efficiency of the emitted light in a single optical mode of 31%.

quant-ph↗

arXiv2020

Two-dimensional linear trap array for quantum information processing

We present an ion-lattice quantum processor based on a two-dimensional arrangement of linear surface traps. Our design features a tunable coupling between ions in adjacent lattice sites and a configurable ion-lattice connectivity, allowing one, e.g., to realize rectangular and triangular lattices with the same trap chip. We present detailed trap simulations of a simplest-instance ion array with $2\times9$ trapping sites and report on the fabrication of a prototype device in an industrial facility. The design and the employed fabrication processes are scalable to larger array sizes. We demonstrate trapping of ions in rectangular and triangular lattices and demonstrate transport of a $2\times2$ ion-lattice over one lattice period.

quant-ph↗

arXiv2020

Probing surface charge densities on optical fibers with a trapped ion

We describe a novel method to measure the surface charge densities on optical fibers placed in the vicinity of a trapped ion, where the ion itself acts as the probe. Surface charges distort the trapping potential, and when the fibers are displaced, the ion's equilibrium position and secular motional frequencies are altered. We measure the latter quantities for different positions of the fibers and compare these measurements to simulations in which unknown charge densities on the fibers are adjustable parameters. Values ranging from $-10$ to $+50$ e/$\mu$m$^2$ were determined. Our results will benefit the design and simulation of miniaturized experimental systems combining ion traps and integrated optics, for example, in the fields of quantum computation, communication and metrology. Furthermore, our method can be applied to any setup in which a dielectric element can be displaced relative to a trapped charge-sensitive particle.

quant-ph↗

arXiv2019

Wavelength-scale errors in optical localization due to spin-orbit coupling of light

The precise determination of the position of point-like emitters and scatterers using far-field optical imaging techniques is of utmost importance for a wide range of applications in medicine, biology, astronomy, and physics. Although the optical wavelength sets a fundamental limit to the image resolution of unknown objects, the position of an individual emitter can in principle be estimated from the image with arbitrary precision. This is used, e.g., in stars' position determination and in optical super-resolution microscopy. Furthermore, precise position determination is an experimental prerequisite for the manipulation and measurement of individual quantum systems, such as atoms, ions, and solid state-based quantum emitters. Here we demonstrate that spin-orbit coupling of light in the emission of elliptically polarized emitters can lead to systematic, wavelength-scale errors in the estimate of the emitter's position. Imaging a single trapped atom as well as a single sub-wavelength-diameter gold nanoparticle, we demonstrate a shift between the emitters' measured and actual positions which is comparable to the optical wavelength. Remarkably, for certain settings, the expected shift can become arbitrarily large. Beyond their relevance for optical imaging techniques, our findings apply to the localization of objects using any type of wave that carries orbital angular momentum relative to the emitter's position with a component orthogonal to the direction of observation.

quant-ph↗

arXiv2019

Microelectromechanical-System-Based Design of a High-Finesse Fiber Cavity Integrated with an Ion Trap

We present a numerical study of a MEMS-based design of a fiber cavity integrated with an ion trap system. Each fiber mirror is supported by a microactuator that controls the mirror's position in three dimensions. The mechanical stability is investigated by a feasibility analysis showing that the actuator offers a stable support of the fiber. The actuators move the fibers' positions continuously with a stroke of more than 10 $\mu$m, with mechanical resonance frequencies on the order of kHz. A calculation of the trapping potential shows that a separation between ion and fiber consistent with strong ion-cavity coupling is feasible. Our miniaturized ion-photon interface constitutes a viable approach to integrated hardware for quantum information.

quant-ph↗

arXiv2019

Frequency measurement of the $^{1}\mathrm{S}_{0}, F=5/2\leftrightarrow\,^{3}\mathrm{P}_{1}, F=7/2$ transition of $^{27}$Al$^{+}$ via quantum logic spectroscopy with $^{40}$Ca$^{+}$

We perform quantum logic spectroscopy with a $^{27}$Al$^{+}$/$^{40}$Ca$^{+}$ mixed ion crystal in a linear Paul trap for a measurement of the $(3s^{2})\,^{1}\mathrm{S}_{0} \leftrightarrow \, (3s3p)\,^{3}\mathrm{P}_{1}, F=7/2$ intercombination transition in $^{27}$Al$^{+}$. Towards this end, Ramsey spectroscopy is used for probing the transition in $^{27}$Al$^{+}$ and the $(4s^{2})\,\mathrm{S}_{1/2} \leftrightarrow \, (4s3d)\,\mathrm{D}_{5/2}$ clock transition in $^{40}$Ca$^{+}$ in interleaved measurements. By using the precisely measured frequency of the clock transition in $^{40}$Ca$^{+}$ as a frequency reference, we determine the frequency of the intercombination line to be $\nu_{^{1}\mathrm{S}_{0} \leftrightarrow \,^{3}\mathrm{P}_{1},F=7/2}$=1122 842 857 334 736(93) Hz and the Land\'e g-factor of the excited state to be $g_{^{3}\mathrm{P}_{1}, F=7/2}$=0.428132(2).

quant-ph↗

arXiv2017

Interference of single photons emitted by entangled atoms in free space

The generation and manipulation of entanglement between isolated particles has precipitated rapid progress in quantum information processing. Entanglement is also known to play an essential role in the optical properties of atomic ensembles, but fundamental effects in the controlled emission and absorption from small, well-defined numbers of entangled emitters in free space have remained unobserved. Here we present the control of the spontaneous emission rate of a single photon from a pair of distant, entangled atoms into a free-space optical mode. Changing the length of the optical path connecting the atoms modulates the emission rate with a visibility $V = 0.27 \pm 0.03$ determined by the degree of entanglement shared between the atoms, corresponding directly to the concurrence $\mathcal{C_{\rho}}= 0.31 \pm 0.10$ of the prepared state. This scheme, together with population measurements, provides a fully optical determination of the amount of entanglement. Furthermore, large sensitivity of the interference phase evolution points to applications of the presented scheme in high-precision gradient sensing.

quant-ph↗

arXiv2017

Fabrication of Precision Hemispherical Mirrors for Quantum Optics Applications

High precision, high numerical aperture mirrors are desirable for mediating strong atom-light coupling in quantum optics applications and can also serve as important reference surfaces for optical metrology. In this work we demonstrate the fabrication of highly-precise hemispheric mirrors with numerical aperture NA = 0.996. The mirrors were fabricated from aluminum by single-point diamond turning using a stable ultra- precision lathe calibrated with an in-situ white-light interferometer. Our mirrors have a diameter of 25 mm and were characterized using a combination of wide-angle single- shot and small-angle stitched multi-shot interferometry. The measurements show root- mean-square (RMS) form errors consistently below 25 nm. The smoothest of our mirrors has a RMS error of 14 nm and a peak-to-valley (PV) error of 88 nm, which corresponds to a form accuracy of $\lambda$=50 for visible optics.

physics.ins-det↗

arXiv2014

Single-mode optical fiber for high-power, low-loss UV transmission

We report large-mode-area solid-core photonic crystal fibers made from fused silica that resist ultraviolet (UV) solarization even at relatively high optical powers. Using a process of hydrogen loading and UV irradiation of the fibers, we demonstrate stable single-mode transmission over hundreds of hours for fiber output powers of 10 mW at 280 nm and 125 mW at 313 nm (limited only by the available laser power). Fiber attenuation ranges from 0.9 dB/m to 0.13 dB/m at these wavelengths, and is unaffected by bending for radii above 50 mm.

quant-ph↗

arXiv2014

Tunable spin-spin interactions and entanglement of ions in separate wells

Quantum simulation - the use of one quantum system to simulate a less controllable one - may provide an understanding of the many quantum systems which cannot be modeled using classical computers. Impressive progress on control and manipulation has been achieved for various quantum systems, but one of the remaining challenges is the implementation of scalable devices. In this regard, individual ions trapped in separate tunable potential wells are promising. Here we implement the basic features of this approach and demonstrate deterministic tuning of the Coulomb interaction between two ions, independently controlling their local wells. The scheme is suitable for emulating a range of spin-spin interactions, but to characterize the performance of our setup we select one that entangles the internal states of the two ions with 0.82(1) fidelity. Extension of this building-block to a 2D-network, which ion-trap micro-fabrication processes enable, may provide a new quantum simulator architecture with broad flexibility in designing and scaling the arrangement of ions and their mutual interactions. To perform useful quantum simulations, including those of intriguing condensed-matter phenomena such as the fractional quantum Hall effect, an array of tens of ions might be sufficient.

quant-ph↗

arXiv2010

Fiber Fabry-Perot cavity with high finesse

We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F>=130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband.

physics.optics↗

arXiv2010

Cavity-based single atom preparation and high-fidelity hyperfine state readout

We prepare and detect the hyperfine state of a single 87Rb atom coupled to a fiber-based high finesse cavity on an atom chip. The atom is extracted from a Bose-Einstein condensate and trapped at the maximum of the cavity field, resulting in a reproducibly strong atom-cavity coupling. We use the cavity reflection and transmission signal to infer the atomic hyperfine state with a fidelity exceeding 99.92% in a read-out time of 100 microseconds. The atom is still trapped after detection.

quant-ph↗

arXiv2007

Strong atom-field coupling for Bose-Einstein condensates in an optical cavity on a chip

An optical cavity enhances the interaction between atoms and light, and the rate of coherent atom-photon coupling can be made larger than all decoherence rates of the system. For single atoms, this strong coupling regime of cavity quantum electrodynamics (cQED) has been the subject of spectacular experimental advances, and great efforts have been made to control the coupling rate by trapping and cooling the atom towards the motional ground state, which has been achieved in one dimension so far. For N atoms, the three-dimensional ground state of motion is routinely achieved in atomic Bose-Einstein condensates (BECs), but although first experiments combining BECs and optical cavities have been reported recently, coupling BECs to strong-coupling cavities has remained an elusive goal. Here we report such an experiment, which is made possible by combining a new type of fibre-based cavity with atom chip technology. This allows single-atom cQED experiments with a simplified setup and realizes the new situation of N atoms in a cavity each of which is identically and strongly coupled to the cavity mode. Moreover, the BEC can be positioned deterministically anywhere within the cavity and localized entirely within a single antinode of the standing-wave cavity field. This gives rise to a controlled, tunable coupling rate, as we confirm experimentally. We study the heating rate caused by a cavity transmission measurement as a function of the coupling rate and find no measurable heating for strongly coupled BECs. The spectrum of the coupled atoms-cavity system, which we map out over a wide range of atom numbers and cavity-atom detunings, shows vacuum Rabi splittings exceeding 20 gigahertz, as well as an unpredicted additional splitting which we attribute to the atomic hyperfine structure.

quant-ph↗

arXiv2006

Diffuse reflection of a Bose-Einstein condensate from a rough evanescent wave mirror

We present experimental results showing the diffuse reflection of a Bose-Einstein condensate from a rough mirror, consisting of a dielectric substrate supporting a blue-detuned evanescent wave. The scattering is anisotropic, more pronounced in the direction of the surface propagation of the evanescent wave. These results agree very well with theoretical predictions.

physics.atom-ph↗