arXiv subjects

Yuxin Du

Publications and source records attributed to Yuxin Du.

At least 19 recordsLinked to original sources

arXiv2026

SeqFeed: Improving Agentic RTL Code Generation with Sequential Behavior Feedback

RTL code generation is a critical stage in hardware design, and the emergence of agentic systems offers new opportunities to automate this process. To generate correct RTL code, agents must understand sequential behavior, including how signals evolve and propagate over multiple clock cycles. However, effectively conveying such temporal information to agents remains a significant challenge. RTL code does not expose cycle-level signal behavior for a specific execution, whereas full simulation waveforms are too voluminous and noisy for effective LLM analysis. To address these limitations, we study how human engineers reason about sequential behavior and identify three requirements for effective feedback: it should be event-addressable, dependency-traceable, and iteratively-queryable. Guided by these requirements, we propose \textit{SeqFeed}, which comprises two complementary mechanisms: (1) \textit{SeQuery}, an SQL-like waveform query language that enables agents to anchor queries to semantic events and sample signal values at relative time points; and (2) \textit{SeGraph}, a dependency graph that tracks signal propagation across clock cycles. Experimental results across multiple LLMs demonstrate the effectiveness of SeqFeed in improving pass rates. SeQuery and SeGraph are each effective independently and provide complementary benefits when used together.

cs.AR↗

arXiv2026

LA4VLA: Learning to Act without Seeing via Language-Action Pretraining

Vision-Language-Action (VLA) models are commonly pretrained on robot demonstrations by jointly mapping visual observations and language instructions to actions. However, dense visual-action supervision can dominate the comparatively sparse language-action signal. As a result, policies may rely on visual shortcuts rather than learn how language conditions action execution, making them sensitive to visual variations. To address this limitation, we propose LA4VLA, a language-action pretraining framework that enables policies to acquire language-conditioned action priors without visual observations. These priors capture reusable manipulation skills shared across tasks and scenes, reducing reliance on scene-specific visual cues. Specifically, LA4VLA decomposes expert demonstration trajectories into atomic action segments and pairs each segment with a corresponding low-level action description. This yields LA-33K, a dataset of 33K Language-Action (LA) episodes derived entirely from existing demonstrations without additional robot data collection. We further develop LA4VLA-1B, a lightweight 1B-parameter VLA model, and investigate three paradigms for incorporating language-action supervision into VLA learning: LA-only pretraining, sequential LA-to-VLA pretraining, and mixed LA-VLA pretraining. Across simulation and real-world tasks, LA-pretrained policies consistently outperform matched VLA-pretrained counterparts, while combining LA and VLA supervision leads to further gains. In particular, mixed LA-VLA pretraining improves the average success rate of LA4VLA-1B over the no-pretraining baseline by up to 17.8 and 45.0 percentage points in simulation and real-world tasks, respectively. These results establish LA4VLA as an effective and complementary pretraining strategy for building stronger and more robust VLA policies.

cs.RO↗

arXiv2026

Evo-Depth: A Lightweight Depth-Enhanced Vision-Language-Action Model

Vision-Language-Action models have emerged as a promising paradigm for robotic manipulation by unifying perception, language grounding, and action generation. However, they often struggle in scenarios requiring precise spatial understanding, as current VLA models primarily rely on 2D visual representations that lack depth information and detailed spatial relationships. While recent approaches incorporate explicit 3D inputs such as depth maps or point clouds to address this issue, they often increase system complexity, require additional sensors, and remain vulnerable to sensing noise and reconstruction errors. Another line of work explores implicit 3D-aware spatial modeling directly from RGB observations without extra sensors, but it often relies on large geometry foundation models, resulting in higher training and deployment costs. To address these challenges, we propose Evo-Depth, a lightweight depth-enhanced VLA framework that enhances spatially grounded manipulation without relying on additional sensing hardware or compromising deployment efficiency. Evo-Depth employs a lightweight Implicit Depth Encoding Module to extract compact depth features from multi-view RGB images. These features are incorporated into vision-language representations through a Spatial Enhancement Module via depth-aware modulation, enabling efficient spatial-semantic enhancement. A Progressive Alignment Training strategy is further introduced to align the resulting depth-enhanced representations with downstream action learning. With only 0.9B parameters, Evo-Depth achieves superior performance across four simulation benchmarks. In real-world experiments, Evo-Depth attains the highest average success rate while also exhibiting the smallest model size, lowest GPU memory usage, and highest inference frequency among compared methods.

cs.CV↗

arXiv2026

Focusable Monocular Depth Estimation

Monocular depth foundation models generalize well across scenes, yet they are typically optimized with uniform pixel-wise objectives that do not distinguish user-specified or task-relevant target regions from the surrounding context. We therefore introduce Focusable Monocular Depth Estimation (FDE), a region-aware depth estimation task in which, given a specified target region, the model is required to prioritize foreground depth accuracy, preserve sharp boundary transitions, and maintain coherent global scene geometry. To prioritize task-critical region modeling, we propose FocusDepth, a prompt-conditioned monocular relative depth estimation framework that guides depth modeling to focus on target regions via box/text prompts. The core Multi-Scale Spatial-Aligned Fusion (MSSA) in FocusDepth spatially aligns multi-scale features from Segment Anything Model 3 to the Depth Anything family and injects them through scale-specific, gated conditional fusion. This enables dense prompt cue injection without disrupting geometric representations, thereby endowing the depth estimation model with focused perception capability. To study FDE, we establish FDE-Bench, a target-centric monocular relative depth benchmark built from image-target-depth triplets across five datasets, containing 252.9K/72.5K train/val triplets and 972 categories spanning real-world and embodied simulation environments. On FDE-Bench, FocusDepth consistently improves over globally fine-tuned DA2/DA3 baselines under both box and text prompts, with the largest gains appearing in target boundary and foreground regions while preserving global scene geometry. Ablations show that MSSA's spatial alignment is the key design factor, as disrupting prompt-geometry correspondence increases AbsRel by up to 13.8%.

cs.CV↗

arXiv2025

AnyAD: Unified Any-Modality Anomaly Detection in Incomplete Multi-Sequence MRI

Reliable anomaly detection in brain MRI remains challenging due to the scarcity of annotated abnormal cases and the frequent absence of key imaging modalities in real clinical workflows. Existing single-class or multi-class anomaly detection (AD) models typically rely on fixed modality configurations, require repetitive training, or fail to generalize to unseen modality combinations, limiting their clinical scalability. In this work, we present a unified Any-Modality AD framework that performs robust anomaly detection and localization under arbitrary MRI modality availability. The framework integrates a dual-pathway DINOv2 encoder with a feature distribution alignment mechanism that statistically aligns incomplete-modality features with full-modality representations, enabling stable inference even with severe modality dropout. To further enhance semantic consistency, we introduce an Intrinsic Normal Prototypes (INPs) extractor and an INP-guided decoder that reconstruct only normal anatomical patterns while naturally amplifying abnormal deviations. Through randomized modality masking and indirect feature completion during training, the model learns to adapt to all modality configurations without re-training. Extensive experiments on BraTS2018, MU-Glioma-Post, and Pretreat-MetsToBrain-Masks demonstrate that our approach consistently surpasses state-of-the-art industrial and medical AD baselines across 7 modality combinations, achieving superior generalization. This study establishes a scalable paradigm for multimodal medical AD under real-world, imperfect modality conditions. Our source code is available at https://github.com/wuchangw/AnyAD.

cs.CV↗

arXiv2025

Atomistic understanding of two-dimensional monatomic phase-change material for non-volatile optical applications

Elemental antimony (Sb) is a promising material for phase-change memory, neuromorphic computing and nanophotonic applications, because its compositional simplicity can prevent phase segregation upon extensive programming. Scaling down the film thickness is a necessary step to prolong the lifetime of amorphous Sb, but the optical properties of Sb are also significantly altered as the thickness is reduced to a few nanometers, adding complexity to device optimization. In this work, we aim to provide atomistic understanding of the thickness-dependent optical responses in Sb thin films. As thickness decreases, both the extinction coefficient and optical contrast reduce in the near-infrared spectrum, consistent with previous optical measurements. Such thickness dependence gives rise to a bottom thickness limit of 2 nm in photonic applications, as predicted by coarse-grained device simulations. Further bonding analysis reveals a fundamentally different behavior for amorphous and crystalline Sb upon downscaling, resulting in the reduction of optical contrast. Thin film experiments are also carried out to validate our predictions. The thickness-dependent optical trend is fully demonstrated by our ellipsometric spectroscopy experiments, and the bottom thickness limit of 2 nm is confirmed by structural characterization experiments. Finally, we show that the greatly improved amorphous-phase stability of the 2 nm Sb thin film enables robust and reversible optical switching in a silicon-based waveguide device.

cond-mat.mtrl-sci↗

arXiv2025

Effects of thermal annealing and film thickness on the structural and optical properties of indium-tin-oxide thin films

Indium-tin oxide (ITO) is a crucial functional layer for the optoelectronic applications, such as non-volatile color display thin films based on the ITO/phase-change material (PCM)/ITO/reflective metal multilayer structures on a silicon substrate. In addition to non-volatile color tuning by PCMs, thermally induced crystallization may alter the optical properties of ITO layers as well. But the potential change in color of the ITO layers is not considered so far. In this work, we investigate the structural and optical properties of ITO thin films via X-ray diffraction, spectroscopic ellipsometry and ultraviolet-visible spectrophotometry measurements. After thermal annealing at 250 {\deg}C, the ITO thin films of 15-100 nm get crystallized with strong changes in refractive index n and extinction coefficient k in the visible light range. However, for the 5-nm ITO thin film, crystallization is only observed after thermal annealing at 350 {\deg}C and the change in color is limited upon phase transition. We provide a colormap of the ITO/platinum/silicon structure in terms of the annealing temperature (150-350 {\deg}C) and ITO film thickness (5-100 nm). Our work suggests that the intrinsic change in colors of ITO layers should also be considered for the PCM-based reconfigurable display application.

physics.optics↗

arXiv2025

Evo-1: Lightweight Vision-Language-Action Model with Preserved Semantic Alignment

Vision-Language-Action (VLA) models have emerged as a powerful framework that unifies perception, language, and control, enabling robots to perform diverse tasks through multimodal understanding. However, current VLA models typically contain massive parameters and rely heavily on large-scale robot data pretraining, leading to high computational costs during training, as well as limited deployability for real-time inference. Moreover, most training paradigms often degrade the perceptual representations of the vision-language backbone, resulting in overfitting and poor generalization to downstream tasks. In this work, we present Evo-1, a lightweight VLA model that reduces computation and improves deployment efficiency, while maintaining strong performance without pretraining on robot data. Evo-1 builds on a native multimodal Vision-Language model (VLM), incorporating a novel cross-modulated diffusion transformer along with an optimized integration module, together forming an effective architecture. We further introduce a two-stage training paradigm that progressively aligns action with perception, preserving the representations of the VLM. Notably, with only 0.77 billion parameters, Evo-1 achieves state-of-the-art results on the Meta-World and RoboTwin suite, surpassing the previous best models by 12.4% and 6.9%, respectively, and also attains a competitive result of 94.8% on LIBERO. In real-world evaluations, Evo-1 attains a 78% success rate with high inference frequency and low memory overhead, outperforming all baseline methods. We release code, data, and model weights to facilitate future research on lightweight and efficient VLA models.

cs.RO↗

arXiv2025

Homogenization of the scattered wave and scattering resonances for periodic high-contrast subwavelength resonators

We study time-harmonic scattering by a periodic array of penetrable, high-contrast obstacles with small period, confined to a bounded Lipschitz domain. The strong contrast between the obstacles and the background induces subwavelength resonances. We derive a frequency-dependent effective model in the vanishing-period limit and prove quantitative convergence of the heterogeneous scattered wave to the effective scattered wave. We also identify the limiting set of scattering resonances and establish convergence rates. Finally, we establish convergence rates for the far-field pattern of the heterogeneous problem to that of the effective model.

math.AP↗

arXiv2025

VerilogMonkey: Exploring Parallel Scaling for Automated Verilog Code Generation with LLMs

We present VerilogMonkey, an empirical study of parallel scaling for the under-explored task of automated Verilog generation. Parallel scaling improves LLM performance by sampling many outputs in parallel. Across multiple benchmarks and mainstream LLMs, we find that scaling to hundreds of samples is cost-effective in both time and money and, even without any additional enhancements such as post-training or agentic methods, surpasses prior results on LLM-based Verilog generation. We further dissect why parallel scaling delivers these gains and show how output randomness in LLMs affects its effectiveness.

cs.PL↗

arXiv2025

ARSP: Automated Repair of Verilog Designs via Semantic Partitioning

Debugging functional Verilog bugs consumes a significant portion of front-end design time. While Large Language Models (LLMs) have demonstrated great potential in mitigating this effort, existing LLM-based automated debugging methods underperform on industrial-scale modules. A major reason for this is bug signal dilution in long contexts, where a few bug-relevant tokens are overwhelmed by hundreds of unrelated lines, diffusing the model's attention. To address this issue, we introduce ARSP, a two-stage system that mitigates dilution via semantics-guided fragmentation. A Partition LLM splits a module into semantically tight fragments; a Repair LLM patches each fragment; edits are merged without altering unrelated logic. A synthetic data framework generates fragment-level training pairs spanning bug types, design styles, and scales to supervise both models. Experiments show that ARSP achieves 77.92% pass@1 and 83.88% pass@5, outperforming mainstream commercial LLMs including Claude-3.7 and SOTA automated Verilog debugging tools Strider and MEIC. Also, semantic partitioning improves pass@1 by 11.6% and pass@5 by 10.2% over whole-module debugging, validating the effectiveness of fragment-level scope reduction in LLM-based Verilog debugging.

cs.SE↗

arXiv2025

Are They All Good? Evaluating the Quality of CoTs in LLM-based Code Generation

Large language models (LLMs) have demonstrated impressive performance in code generation, particularly when augmented with chain-of-thought (CoT) prompting techniques. They break down requirements into intermediate reasoning steps, which act as design rationales to guide LLMs in writing code like human programmers. Thus, the quality of these steps is crucial for ensuring the correctness and reliability of the generated code. However, little is known about the quality of CoT generated by LLMs. To what extent can we trust the thoughts generated by LLMs? How good are they? This paper empirically explores the external and internal factors of why LLMs generate unsatisfactory CoTs by analyzing 1,023 failed code samples on two widely used code generation benchmarks. We also evaluate their impact on code generation performance by analyzing 210 CoT-code pairs and refining the unsatisfied CoTs by prompting LLMs. Our study reveals three key findings: (1) External factors (53.60%), such as unclear requirements and lack of context, mainly affect CoT quality, while internal factors (40.10%) stem from LLMs' misunderstanding prompts. (2) Even when CoTs are correct, 18.5% of the generated code contains errors due to instruction-following issues; conversely, 11.90% of correct code is paired with flawed CoTs. (3) Refining low-quality CoTs is feasible, i.e., LLMs improve when given detailed problem descriptions. These findings highlight key challenges in CoT-based code generation and suggest directions for improving LLM reasoning and reliability.

cs.SE↗

arXiv2025

Evo-0: Vision-Language-Action Model with Implicit Spatial Understanding

Vision-Language-Action (VLA) models have emerged as a promising framework for enabling generalist robots capable of perceiving, reasoning, and acting in the real world. These models usually build upon pretrained Vision-Language Models (VLMs), which excel at semantic understanding due to large-scale image and text pretraining. However, existing VLMs typically lack precise spatial understanding capabilities, as they are primarily tuned on 2D image-text pairs without 3D supervision. To address this limitation, recent approaches have incorporated explicit 3D inputs such as point clouds or depth maps, but this necessitates additional depth sensors or pre-trained depth estimation models, which may yield defective results. In contrast, our work introduces a plug-and-play module that implicitly incorporates 3D geometry features into VLA models by leveraging an off-the-shelf visual geometry foundation model. This integration provides the model with depth-aware visual representations, improving its ability to understand the geometric structure of the scene and the spatial relationships among objects from RGB images alone. We evaluate our method on a set of spatially challenging tasks in both simulation and the real world. Extensive evaluations show that our method significantly improves the performance of state-of-the-art VLA models across diverse scenarios.

cs.RO↗

arXiv2025

Towards Practical Alzheimer's Disease Diagnosis: A Lightweight and Interpretable Spiking Neural Model

Early diagnosis of Alzheimer's Disease (AD), particularly at the mild cognitive impairment stage, is essential for timely intervention. However, this process faces significant barriers, including reliance on subjective assessments and the high cost of advanced imaging techniques. While deep learning offers automated solutions to improve diagnostic accuracy, its widespread adoption remains constrained due to high energy requirements and computational demands, particularly in resource-limited settings. Spiking neural networks (SNNs) provide a promising alternative, as their brain-inspired design is well-suited to model the sparse and event-driven patterns characteristic of neural degeneration in AD. These networks offer the potential for developing interpretable, energy-efficient diagnostic tools. Despite their advantages, existing SNNs often suffer from limited expressiveness and challenges in stable training, which reduce their effectiveness in handling complex medical tasks. To address these shortcomings, we introduce FasterSNN, a hybrid neural architecture that combines biologically inspired Leaky Integrate-and-Fire (LIF) neurons with region-adaptive convolution and multi-scale spiking attention mechanisms. This approach facilitates efficient, sparse processing of 3D MRI data while maintaining high diagnostic accuracy. Experimental results on benchmark datasets reveal that FasterSNN delivers competitive performance with significantly enhanced efficiency and training stability, highlighting its potential for practical application in AD screening. Our source code is available at https://github.com/wuchangw/FasterSNN.

cs.CV↗

arXiv2025

Robust distortion risk measures with linear penalty under distribution uncertainty

The paper investigates the robust distortion risk measure with linear penalty function under distribution uncertainty. The distribution uncertainties are characterized by predetermined moment conditions or constraints on the Wasserstein distance. The optimal quantile distribution and the optimal value function are explicitly characterized. Our results partially extend the results of Bernard, Pesenti and Vanduffel (2024) and Li (2018) to robust distortion risk measures with linear penalty. In addition, we also discuss the influence of the penalty parameter on the optimal solution.

q-fin.RM↗

arXiv2025

Role of seed layer in growing atomically flat TiTe2/Sb2Te3 heterostructure thin films at the wafer scale

Chalcogenide phase-change materials (PCMs) are a leading candidate for advanced memory and computing applications. Epitaxial-like growth of chalcogenide thin films at the wafer scale is important to guarantee the homogeneity of the thin film but is challenging with magnetron sputtering, particularly for the growth of phase-change heterostructure (PCH), such as TiTe2/Sb2Te3. In this work, we report how to obtain highly textured TiTe2/Sb2Te3 heterostructure thin films with atomically sharp interfaces on standard silicon substrates. By combining atomic-scale characterization and ab initio simulations, we reveal the critical role of the Sb2Te3 seed layer in forming a continuous Si-Sb-Te mixed transition layer, which provides a wafer-scale flat surface for the subsequent epitaxial-like growth of TiTe2/Sb2Te3 thin film. By gradually reducing the thickness of the seed layer, we determine its critical limit to be ~2 nm. Non-negligible in-plane tensile strain was observed in the TiTe2 slabs due to the lattice mismatch with the adjacent Sb2Te3 ones, suggesting that the chemical interaction across the structural gaps in the heterostructure is stronger than a pure van der Waals interaction. Finally, we outline the potential choices of chalcogenides for atomically flat seed layers on standard silicon substrates, which can be used for wafer-scale synthesis of other high-quality PCM or PCH thin films.

cond-mat.mtrl-sci↗

arXiv2025

Multi-modal and Metadata Capture Model for Micro Video Popularity Prediction

As short videos have become the primary form of content consumption across various industries, accurately predicting their popularity has become key to enhancing user engagement and optimizing business strategies. This report presents a solution for the 2024 INFORMS Data Mining Challenge, focusing on our developed 3M model (Multi-modal and Metadata Capture Model), which is a multi-modal popularity prediction model. The 3M model integrates video, audio, descriptions, and metadata to fully explore the multidimensional information of short videos. We employ a retriever-based method to retrieve relevant instances from a multi-modal memory bank, filtering similar videos based on visual, acoustic, and text-based features for prediction. Additionally, we apply a random masking method combined with a semi-supervised model for incomplete multi-modalities to leverage the metadata of videos. Ultimately, we use a network to synthesize both approaches, significantly improving the accuracy of predictions. Compared to traditional tag-based algorithms, our model outperforms existing methods on the validation set, showing a notable increase in prediction accuracy. Our research not only offers a new perspective on understanding the drivers of short video popularity but also provides valuable data support for identifying market opportunities, optimizing advertising strategies, and enhancing content creation. We believe that the innovative methodology proposed in this report provides practical tools and valuable insights for professionals in the field of short video popularity prediction, helping them effectively address future challenges.

cs.MM↗

arXiv2024

Touchstone Benchmark: Are We on the Right Way for Evaluating AI Algorithms for Medical Segmentation?

How can we test AI performance? This question seems trivial, but it isn't. Standard benchmarks often have problems such as in-distribution and small-size test sets, oversimplified metrics, unfair comparisons, and short-term outcome pressure. As a consequence, good performance on standard benchmarks does not guarantee success in real-world scenarios. To address these problems, we present Touchstone, a large-scale collaborative segmentation benchmark of 9 types of abdominal organs. This benchmark is based on 5,195 training CT scans from 76 hospitals around the world and 5,903 testing CT scans from 11 additional hospitals. This diverse test set enhances the statistical significance of benchmark results and rigorously evaluates AI algorithms across various out-of-distribution scenarios. We invited 14 inventors of 19 AI algorithms to train their algorithms, while our team, as a third party, independently evaluated these algorithms on three test sets. In addition, we also evaluated pre-existing AI frameworks--which, differing from algorithms, are more flexible and can support different algorithms--including MONAI from NVIDIA, nnU-Net from DKFZ, and numerous other open-source frameworks. We are committed to expanding this benchmark to encourage more innovation of AI algorithms for the medical domain.

cs.CV↗