arXiv subjects

Yuwen Chen

Publications and source records attributed to Yuwen Chen.

At least 19 recordsLinked to original sources

arXiv2026

Design and commissioning of a windowless gas-target system for high-current beams at JUNA

Windowless gas targets avoid the beam-energy loss and straggling introduced by entrance foils and are therefore well suited for direct measurements of low-energy nuclear reactions. A windowless gas-target system designed for operation with milliampere beams has been developed for the Jinping Underground Nuclear Astrophysics facility (JUNA). The system combines three-stage differential pumping, closed-loop gas recovery and purification, a constant-temperature power-compensation calorimeter, and a position-resolved target-thickness monitor based on secondary elastic scattering. Stable operation was achieved over a target-pressure range of 1-3 mbar, with pressure fluctuations below 1% during 8 h of continuous circulation, while the accelerator-side pressure was maintained at approximately $10^{-4}$ Pa. The closed-loop gas-circulation system maintained stable target conditions, while gas-transport calculations indicated that the axial pressure nonuniformity remained within approximately 1.6% under representative operating conditions. Calorimeter measurements were consistent with the thermal calculations, supporting the sensitivity correction used for beam-power determination. Beam commissioning with $^{14}\mathrm{N}(p,\gamma)^{15}\mathrm{O}$ and $^{12}\mathrm{C}(p,\gamma)^{13}\mathrm{N}$ at the 600 kV Cockcroft-Walton accelerator of the China Institute of Atomic Energy (CIAE) demonstrated stable operation of the gas-target and $\gamma$-ray detection systems and provided information on the influences of reaction position and beam heating. These results demonstrate the operating stability and diagnostic capability of the system for future high-current, low-energy nuclear-reaction measurements at JUNA.

astro-ph.GA↗

arXiv2026

Hidden Decoding at Scale: Latent Computation Scaling for Large Language Models

Scaling Large Language Models (LLMs) has been driven mainly by enlarging the Transformer backbone, but for an already-strong model this requires another round of costly pretraining. We study whether an existing backbone can keep improving by allocating more computation to each token while leaving the Transformer backbone fixed. Depth-recurrent (looped) Transformers pursue this goal but are hard to scale, because looped computation does not fit naturally with the pipeline parallelism used to train the largest models. We add computation along the sequence-length dimension, where the extra computation is simply a longer input and stays compatible with standard large-model training. We propose Hidden Decoding, a sequence-length scaling method applied during continued pretraining (CPT). It expands each token into n streams with independent embedding tables and keeps the intermediate streams' key-value cache as context, so each token performs more internal computation without adding or widening Transformer layers. To keep this affordable at scale, we introduce Stream-Factorized Attention, in which most layers attend only within each stream and only a few layers mix across streams, reducing the attention cost from quadratic to roughly linear in n. Experiments support two scaling results. At frontier scale, we train WeLM-HD4-80B and WeLM-HD4-617B at n=4 and improve their matched non-HD baselines, making Hidden Decoding the first demonstrated sequence-length scaling method at the 100B+ MoE scale. Across expansion factors, the gains grow as n increases, showing that sequence-length expansion is a practical fixed-backbone scaling path for frontier-scale LLMs.

cs.CL↗

arXiv2026

Proposal Refinement for Few-Shot Object Detection

Few-shot object detection has gained widely attention in recent years. Some excellent algorithms have been proposed to handle this task. However, most of these algorithms rely on the performance of few-shot classification. Unlike previous attempts, our work focuses on the problem of unbalanced distribution of region proposals between the novel classes and the base classes. In order to alleviate this unbalanced distribution, we propose the proposal refinement approach for different training phases. Specifically, refinement loss is designed for the base training phase to enhance sensitivity of the model to novel classes, and refinement branch is introduced as an auxiliary branch for RPN (Region Proposal Networks) to generate more novel proposals in the fine-tuning phase. By rebalancing the proposal distribution, the proposed approach outperforms the baselines methods by roughly 1\%$\sim$6\% on current benchmarks without increasing any inference time. Through extensive experiments, we prove that we establish a new state-of-the-art method for the few-shot object detection task.

cs.CV↗

arXiv2026

LegSegNet: A Public Deep Learning System for Lower Extremity CT Tissue Segmentation and Quantification

Lower extremity computed tomography (CT) contains clinically relevant information for body composition analysis, sarcopenia assessment, and musculoskeletal disease monitoring, but extracting these measurements at scale requires accurate tissue segmentation and an automated quantification workflow. Existing public segmentation tools are not designed for comprehensive lower extremity CT analysis, particularly for clinically important inter/intramuscular adipose tissue, and most public methods only provide mask prediction rather than an end-to-end quantification system. To address this problem, we present LegSegNet, a deep learning system for lower extremity CT tissue segmentation and body composition quantification. Given an input CT scan, LegSegNet segments bone, skeletal muscle, subcutaneous adipose tissue, and inter/intramuscular adipose tissue. It then computes quantitative tissue measurements for downstream analysis. We developed the segmentation model using 1,302 manually annotated CT slices and evaluated it on 900 held-out test slices, with all annotations reviewed by radiologists. We benchmark LegSegNet against a broad set of 2D segmentation methods, including CNN-based models, transformer-based models, and finetuned foundation models, and further evaluate its generalization on an external public CT dataset. LegSegNet achieves the best overall segmentation performance, with an average Dice score of 89.31 on the held-out test set. To our knowledge, LegSegNet is the first publicly available end-to-end system for lower extremity CT tissue segmentation and quantification, providing a practical evaluation tool for future computer vision research in medical image analysis. The code and model weights are available at: https://github.com/mazurowski-lab/LegSegNet

cs.CV↗

arXiv2026

GaussianPile: A Unified Sparse Gaussian Splatting Framework for Slice-based Volumetric Reconstruction

Slice-based volumetric imaging is widely applied and it demands representations that compress aggressively while preserving internal structure for analysis. We introduce GaussianPile, unifying 3D Gaussian splatting with an imaging system-aware focus model to address this challenge. Our proposed method introduces three key innovations: (i) a slice-aware piling strategy that positions anisotropic 3D Gaussians to model through-slice contributions, (ii) a differentiable projection operator that encodes the finite-thickness point spread function of the imaging acquisition system, and (iii) a compact encoding and joint optimization pipeline that simultaneously reconstructs and compresses the Gaussian sets. Our CUDA-based design retains the compression and real-time rendering efficiency of Gaussian primitives while preserving high-frequency internal volumetric detail. Experiments on microscopy and ultrasound datasets demonstrate that our method reduces storage and reconstruction cost, sustains diagnostic fidelity, and enables fast 2D visualization, along with 3D voxelization. In practice, it delivers high-quality results in as few as 3 minutes, up to 11x faster than NeRF-based approaches, and achieves consistent 16x compression over voxel grids, offering a practical path to deployable compression and exploration of slice-based volumetric datasets.

cs.CV↗

arXiv2026

His2Trans: A Knowledge-Guided Agentic Framework for Project-Level C-to-Rust Migration

C remains a major implementation language for operating systems, embedded platforms, and infrastructure software, but manual memory management continues to create security and maintenance costs. Rust is a practical migration target because it retains low-level control while enforcing stronger memory-safety checks. At project scale, especially under gradual C/Rust coexistence, migration is not a sequence of syntax-preserving function rewrites. A translator must preserve project interfaces, observable behavior, system interaction protocols, and low-level interoperability boundaries while staying consistent with migration choices already made in the codebase. We introduce His2Trans, a knowledge-guided agentic framework for project-level C-to-Rust migration. His2Trans reuses interface-level and fragment-level knowledge mined from historical C/Rust migrations to guide new translations toward Rust interfaces, wrapper choices, and local idioms already accepted in the evolving project. It then refines the assembled crate with project-level agentic feedback. On ten OpenHarmony modules, His2Trans reaches a 100.00\% incremental compilation pass rate, a 94.92\% Test Pass Rate, and a 16.35\% Unsafe Ratio. On eight open-source C projects, it reaches 100.00\% for both incremental compilation and Test Pass Rate, reducing Unsafe Ratio from 42.88\% under C2Rust to 8.59\%. These results support knowledge-guided migration and project-level agentic refinement as practical mechanisms for preserving observable behavior while reducing the unsafe burden of rule-based transpilation.

cs.SE↗

arXiv2025

TECM*: A Data-Driven Assessment to Reinforcement Learning Methods and Application to Heparin Treatment Strategy for Surgical Sepsis

Objective: Sepsis is a life-threatening condition caused by severe infection leading to acute organ dysfunction. This study proposes a data-driven metric and a continuous reward function to optimize personalized heparin therapy in surgical sepsis patients. Methods: Data from the MIMIC-IV v1.0 and eICU v2.0 databases were used for model development and evaluation. The training cohort consisted of abdominal surgery patients receiving unfractionated heparin (UFH) after postoperative sepsis onset. We introduce a new RL-based framework: converting the discrete SOFA score to a continuous cxSOFA for more nuanced state and reward functions; Second, defining "good" or "bad" strategies based on cxSOFA by a stepwise manner; Third, proposing a Treatment Effect Comparison Matrix (TECM), analogous to a confusion matrix for classification tasks, to evaluate the treatment strategies. We applied different RL algorithms, Q-Learning, DQN, DDQN, BCQ and CQL to optimize the treatment and comprehensively evaluated the framework. Results: Among the AI-derived strategies, the cxSOFA-CQL model achieved the best performance, reducing mortality from 1.83% to 0.74% with the average hospital stay from 11.11 to 9.42 days. TECM demonstrated consistent outcomes across models, highlighting robustness. Conclusion: The proposed RL framework enables interpretable and robust optimization of heparin therapy in surgical sepsis. Continuous cxSOFA scoring and TECM-based evaluation provide nuanced treatment assessment, showing promise for improving clinical outcomes and decision-support reliability.

cs.LG↗

arXiv2025

A warmstarting technique for general conic optimization in interior point methods

We propose a novel warmstarting method for primal-dual interior point methods based on a smoothing operator that generates a starting point on the central path from the previous optimum. Compared to traditional approaches that prioritize minimizing infeasibility residuals, our method focuses on maintaining proximity to the central path. Computation of a smoothing operator is efficient and can be parallelized for conic constraints. We also prove that the residual of the smoothed starting point remains comparable to the one before the smoothing step. The numerical tests show that the proposed warmstarting strategy can reduce iteration numbers and computational time effectively across test problems.

math.OC↗

arXiv2025

Parallel KKT Solver in PIQP for Multistage Optimization

This paper presents an efficient parallel Cholesky factorization and triangular solve algorithm for the Karush-Kuhn-Tucker (KKT) systems arising in multistage optimization problems, with a focus on model predictive control and trajectory optimization for racing. The proposed approach directly parallelizes solving the KKT systems with block-tridiagonal-arrow KKT matrices on the linear algebra level arising in interior-point methods. The algorithm is implemented as a new backend of the PIQP solver and released as open source. Numerical experiments on the chain-of-masses benchmarks and a minimum curvature race line optimization problem demonstrate substantial performance gains compared to other state-of-the-art solvers.

math.OC↗

arXiv2025

Transplant-Ready? Evaluating AI Lung Segmentation Models in Candidates with Severe Lung Disease

This study evaluates publicly available deep-learning based lung segmentation models in transplant-eligible patients to determine their performance across disease severity levels, pathology categories, and lung sides, and to identify limitations impacting their use in preoperative planning in lung transplantation. This retrospective study included 32 patients who underwent chest CT scans at Duke University Health System between 2017 and 2019 (total of 3,645 2D axial slices). Patients with standard axial CT scans were selected based on the presence of two or more lung pathologies of varying severity. Lung segmentation was performed using three previously developed deep learning models: Unet-R231, TotalSegmentator, MedSAM. Performance was assessed using quantitative metrics (volumetric similarity, Dice similarity coefficient, Hausdorff distance) and a qualitative measure (four-point clinical acceptability scale). Unet-R231 consistently outperformed TotalSegmentator and MedSAM in general, for different severity levels, and pathology categories (p<0.05). All models showed significant performance declines from mild to moderate-to-severe cases, particularly in volumetric similarity (p<0.05), without significant differences among lung sides or pathology types. Unet-R231 provided the most accurate automated lung segmentation among evaluated models with TotalSegmentator being a close second, though their performance declined significantly in moderate-to-severe cases, emphasizing the need for specialized model fine-tuning in severe pathology contexts.

cs.CV↗

arXiv2025

BreastSegNet: Multi-label Segmentation of Breast MRI

Breast MRI provides high-resolution imaging critical for breast cancer screening and preoperative staging. However, existing segmentation methods for breast MRI remain limited in scope, often focusing on only a few anatomical structures, such as fibroglandular tissue or tumors, and do not cover the full range of tissues seen in scans. This narrows their utility for quantitative analysis. In this study, we present BreastSegNet, a multi-label segmentation algorithm for breast MRI that covers nine anatomical labels: fibroglandular tissue (FGT), vessel, muscle, bone, lesion, lymph node, heart, liver, and implant. We manually annotated a large set of 1123 MRI slices capturing these structures with detailed review and correction from an expert radiologist. Additionally, we benchmark nine segmentation models, including U-Net, SwinUNet, UNet++, SAM, MedSAM, and nnU-Net with multiple ResNet-based encoders. Among them, nnU-Net ResEncM achieves the highest average Dice scores of 0.694 across all labels. It performs especially well on heart, liver, muscle, FGT, and bone, with Dice scores exceeding 0.73, and approaching 0.90 for heart and liver. All model code and weights are publicly available, and we plan to release the data at a later date.

eess.IV↗

arXiv2025

CrowdTrack: A Benchmark for Difficult Multiple Pedestrian Tracking in Real Scenarios

Multi-object tracking is a classic field in computer vision. Among them, pedestrian tracking has extremely high application value and has become the most popular research category. Existing methods mainly use motion or appearance information for tracking, which is often difficult in complex scenarios. For the motion information, mutual occlusions between objects often prevent updating of the motion state; for the appearance information, non-robust results are often obtained due to reasons such as only partial visibility of the object or blurred images. Although learning how to perform tracking in these situations from the annotated data is the simplest solution, the existing MOT dataset fails to satisfy this solution. Existing methods mainly have two drawbacks: relatively simple scene composition and non-realistic scenarios. Although some of the video sequences in existing dataset do not have the above-mentioned drawbacks, the number is far from adequate for research purposes. To this end, we propose a difficult large-scale dataset for multi-pedestrian tracking, shot mainly from the first-person view and all from real-life complex scenarios. We name it ``CrowdTrack'' because there are numerous objects in most of the sequences. Our dataset consists of 33 videos, containing a total of 5,185 trajectories. Each object is annotated with a complete bounding box and a unique object ID. The dataset will provide a platform to facilitate the development of algorithms that remain effective in complex situations. We analyzed the dataset comprehensively and tested multiple SOTA models on our dataset. Besides, we analyzed the performance of the foundation models on our dataset. The dataset and project code is released at: https://github.com/loseevaya/CrowdTrack .

cs.CV↗

arXiv2025

SegmentAnyMuscle: A universal muscle segmentation model across different locations in MRI

The quantity and quality of muscles are increasingly recognized as important predictors of health outcomes. While MRI offers a valuable modality for such assessments, obtaining precise quantitative measurements of musculature remains challenging. This study aimed to develop a publicly available model for muscle segmentation in MRIs and demonstrate its applicability across various anatomical locations and imaging sequences. A total of 362 MRIs from 160 patients at a single tertiary center (Duke University Health System, 2016-2020) were included, with 316 MRIs from 114 patients used for model development. The model was tested on two separate sets: one with 28 MRIs representing common sequence types, achieving an average Dice Similarity Coefficient (DSC) of 88.45%, and another with 18 MRIs featuring less frequent sequences and abnormalities such as muscular atrophy, hardware, and significant noise, achieving 86.21% DSC. These results demonstrate the feasibility of a fully automated deep learning algorithm for segmenting muscles on MRI across diverse settings. The public release of this model enables consistent, reproducible research into the relationship between musculature and health.

eess.SP↗

arXiv2025

MRI-CORE: A Foundation Model for Magnetic Resonance Imaging

The widespread use of Magnetic Resonance Imaging (MRI) in combination with deep learning shows promise for many high-impact automated diagnostic and prognostic tools. However, training new models requires large amounts of labeled data, a challenge due to high cost of precise annotations and data privacy. To address this issue, we introduce the MRI-CORE, a vision foundation model trained using more than 6 million slices from over 110 thousand MRI volumes across 18 body locations. Our experiments show notable improvements in performance over state-of-the-art methods in 13 data-restricted segmentation tasks, as well as in image classification, and zero-shot segmentation, showing the strong potential of MRI-CORE to enable data-efficient development of artificial intelligence models. We also present data on which strategies yield most useful foundation models and a novel analysis relating similarity between pre-training and downstream task data with transfer learning performance. Our model is publicly available with a permissive license.

eess.IV↗

arXiv2025

CReFT-CAD: Boosting Orthographic Projection Reasoning for CAD via Reinforcement Fine-Tuning

Computer-Aided Design (CAD) plays a pivotal role in industrial manufacturing. Orthographic projection reasoning underpins the entire CAD workflow, encompassing design, manufacturing, and simulation. However, prevailing deep-learning approaches employ standard 3D reconstruction pipelines as an alternative, which often introduce imprecise dimensions and limit the parametric editability required for CAD workflows. Recently, some researchers adopt vision-language models (VLMs), particularly supervised fine-tuning (SFT), to tackle CAD-related challenges. SFT shows promise but often devolves into pattern memorization, yielding poor out-of-distribution performance on complex reasoning tasks. To address these gaps, we introduce CReFT-CAD, a two-stage fine-tuning paradigm that first employs a curriculum-driven reinforcement learning stage with difficulty-aware rewards to build reasoning ability steadily, and then applies supervised post-tuning to hone instruction following and semantic extraction. Complementing this, we release TriView2CAD, the first large-scale, open-source benchmark for orthographic projection reasoning, comprising 200,000 synthetic and 3,000 real-world orthographic projections with precise dimension annotations and six interoperable data modalities. We benchmark leading VLMs on orthographic projection reasoning and demonstrate that CReFT-CAD substantially improves reasoning accuracy and out-of-distribution generalizability in real-world scenarios, offering valuable insights for advancing CAD reasoning research.

cs.CV↗

arXiv2025

GuidedMorph: Two-Stage Deformable Registration for Breast MRI

Accurately registering breast MR images from different time points enables the alignment of anatomical structures and tracking of tumor progression, supporting more effective breast cancer detection, diagnosis, and treatment planning. However, the complexity of dense tissue and its highly non-rigid nature pose challenges for conventional registration methods, which primarily focus on aligning general structures while overlooking intricate internal details. To address this, we propose \textbf{GuidedMorph}, a novel two-stage registration framework designed to better align dense tissue. In addition to a single-scale network for global structure alignment, we introduce a framework that utilizes dense tissue information to track breast movement. The learned transformation fields are fused by introducing the Dual Spatial Transformer Network (DSTN), improving overall alignment accuracy. A novel warping method based on the Euclidean distance transform (EDT) is also proposed to accurately warp the registered dense tissue and breast masks, preserving fine structural details during deformation. The framework supports paradigms that require external segmentation models and with image data only. It also operates effectively with the VoxelMorph and TransMorph backbones, offering a versatile solution for breast registration. We validate our method on ISPY2 and internal dataset, demonstrating superior performance in dense tissue, overall breast alignment, and breast structural similarity index measure (SSIM), with notable improvements by over 13.01% in dense tissue Dice, 3.13% in breast Dice, and 1.21% in breast SSIM compared to the best learning-based baseline.

eess.IV↗

arXiv2025

Accelerating Volumetric Medical Image Annotation via Short-Long Memory SAM 2

Manual annotation of volumetric medical images, such as magnetic resonance imaging (MRI) and computed tomography (CT), is a labor-intensive and time-consuming process. Recent advancements in foundation models for video object segmentation, such as Segment Anything Model 2 (SAM 2), offer a potential opportunity to significantly speed up the annotation process by manually annotating one or a few slices and then propagating target masks across the entire volume. However, the performance of SAM 2 in this context varies. Our experiments show that relying on a single memory bank and attention module is prone to error propagation, particularly at boundary regions where the target is present in the previous slice but absent in the current one. To address this problem, we propose Short-Long Memory SAM 2 (SLM-SAM 2), a novel architecture that integrates distinct short-term and long-term memory banks with separate attention modules to improve segmentation accuracy. We evaluate SLM-SAM 2 on four public datasets covering organs, bones, and muscles across MRI, CT, and ultrasound videos. We show that the proposed method markedly outperforms the default SAM 2, achieving an average Dice Similarity Coefficient improvement of 0.14 and 0.10 in the scenarios when 5 volumes and 1 volume are available for the initial adaptation, respectively. SLM-SAM 2 also exhibits stronger resistance to over-propagation, reducing the time required to correct propagated masks by 60.575% per volume compared to SAM 2, making a notable step toward more accurate automated annotation of medical images for segmentation model development.

eess.IV↗

arXiv2025

Temporal Gaussian Copula For Clinical Multivariate Time Series Data Imputation

The imputation of the Multivariate time series (MTS) is particularly challenging since the MTS typically contains irregular patterns of missing values due to various factors such as instrument failures, interference from irrelevant data, and privacy regulations. Existing statistical methods and deep learning methods have shown promising results in time series imputation. In this paper, we propose a Temporal Gaussian Copula Model (TGC) for three-order MTS imputation. The key idea is to leverage the Gaussian Copula to explore the cross-variable and temporal relationships based on the latent Gaussian representation. Subsequently, we employ an Expectation-Maximization (EM) algorithm to improve robustness in managing data with varying missing rates. Comprehensive experiments were conducted on three real-world MTS datasets. The results demonstrate that our TGC substantially outperforms the state-of-the-art imputation methods. Additionally, the TGC model exhibits stronger robustness to the varying missing ratios in the test dataset. Our code is available at https://github.com/MVL-Lab/TGC-MTS.

cs.LG↗