arXiv Science⌕ Search

arXiv subjects

Yuri Yu. Tarasevich

Publications and source records attributed to Yuri Yu. Tarasevich.

At least 19 recordsLinked to original sources
arXiv2026

Electrical conductivity of crack-template-based transparent conducting films: mean-field approximation, effective-medium theory, and simulation

In this work, crack-template-based transparent conducting films were modeled as networks corresponding to the edges of a two-dimensional Poisson--Voronoi diagram. Two types of networks were considered: the original one, in which the conductance of each edge was inversely proportional to its length, and the effective one, in which all edges had the same conductance obtained from the effective-medium theory. The mean-field approximation was used for analytical evaluation of the electrical conductivity. Direct numerical calculations for the Poisson--Voronoi diagram showed that the mean-field approximation overestimated the effective conductivity of the original network by approximately 13\%, and of the effective network by 79\%. In addition, a honeycomb network with an edge conductance distribution corresponding to the Poisson--Voronoi diagram was studied: for it, the predictions of the effective-medium theory turned out to be more accurate than for the Poisson--Voronoi diagram, which was explained by the greater structural homogeneity of the periodic honeycomb lattice. The results indicate that, when modeling crack-template-based transparent conducting films, the application of the mean-field approximation may lead to significant errors if the resistance of individual conductors is not simply proportional to their length. This possibility is discussed as a motivation for future studies of hierarchical cracks with variable width, which are not directly investigated here.

cond-mat.dis-nn↗
arXiv2026

Hierarchical crack patterns: Identification of crack generations

Identifying crack generations from microscopic images of hierarchical crack patterns is challenging due to the lack of temporal information and sensitivity to image boundaries. Existing algorithms often fragment individual cracks or lose stability when the observed fragment is shifted. We propose a method that reduces the classification problem to topological sorting of a directed acyclic graph (descendant$\to$parent), built from T-junctions and nearly collinear edges. Sequential removal of leaf vertices assigns generation numbers starting from the youngest. On 100 computer-generated networks, our method correctly classifies $\approx 70$\% of cracks at a window size of only three mean edge lengths, whereas a conventional approach that starts from primary cracks drops nearly to zero. The classification is highly stable against reasonable shifts of image boundaries but remains limited to strictly hierarchical networks.

cond-mat.dis-nn↗
arXiv2026

Algorithms for generating planar networks simulating hierarchical patterns of cracks formed during film drying

Hierarchical crack patterns that arise during the drying of thin films of colloidal dispersions or polymer solutions on a solid substrate are of interest both from a fundamental standpoint and in the context of the creation of transparent electrodes for optoelectronics. This paper analyzes the morphology of such patterns based on image processing of real-world samples. Graph theory is used to extract chains of edges and analyze the network topology. A method based on the hierarchy of connections is applied to classify cracks by generation. The limitations of existing classification approaches related to the discreteness of the time scale and the use of only a part of the entire pattern are discussed. Three approaches are used to generate artificial hierarchical networks: random uniform partitioning, recursive Voronoi partitioning, and a crack growth simulation model, each modified to reproduce the hierarchical structure. A comparison was made of the geometric characteristics (distribution of crack angles, edge lengths, cell areas, and circularity coefficient) and topological properties (distribution of the number of cell sides) of real and simulated networks. It was shown that the simulation model best reproduces the key features of real cracks, including the characteristic right angles of their connections.

cond-mat.dis-nn↗
arXiv2026

Electrical conductivity of a random nanowire network: comparison of two-dimensional and quasi-three-dimensional models

Although the two-dimensional model of random networks of metallic nanowires or carbon nanotubes is widely used, it significantly overestimates the number of contacts between elements compared to quasi-three-dimensional models. This, within the mean-field approximation, leads to overestimates of the electrical conductivity, especially when the main contribution to the system's electrical conductivity comes from the contact resistances between the conductors. In the two-dimensional model, the system's electrical conductivity depends quadratically on the conductor density, whereas in the three-dimensional model, this dependence is linear. We propose a simple modification of a two-dimensional model, which can capture the saturation effect of the number of contacts per conductor in a real nanowire network.

cond-mat.dis-nn↗
arXiv2025

Electrical conductivity of randomly placed linear wires: a mean field approach

Using the mean-field approximation, a formula for the effective electrical conductivity of a two-dimensional system of randomly arranged conducting sticks with a given orientation distribution was obtained. Both the resistance of the sticks themselves and the resistance of the contacts between them were taken into account. The accuracy in the resulting formula was analyzed. A comparison of the theoretical predictions of mean-field approach with the results of direct electrical conductivity calculations for several model orientation distributions describing systems with crossed sticks demonstrated good agreement. Our study showed that cross-alignment of nanowires should lead to a decreasing in the electrical conductivity compared to electrodes with isotropically arranged nanowires. We suppose that the widely used model with zero-width sticks is quite acceptable for systems of cross-aligned nanowires, but overestimates their connectivity in isotropic systems. Thus, the enhancement of the electrical conductivity of conducting films with cross-aligned nanowires may be due to a significant difference in the network topology.

cond-mat.stat-mech↗
arXiv2025

Effective medium theory for the electrical conductivity of random metallic nanowire networks

Interest in studying the conductive properties of networks made from randomly distributed nanowires is due to their numerous technological applications. Although the sheet resistance of such networks can be calculated directly, the calculations require many characteristics of the system (distributions of lengths, diameters and resistances of nanowires, distribution of junction resistance), the measurement of which is difficult. Furthermore, such calculations can hardly offer an analytical dependence of the sheet resistance on the basic physical parameters of the systems under consideration. Although various theoretical approaches offer such analytical dependencies, they are often based on more or less reasonable assumptions rather than rigorously proven statements. Here, we offer an approach based on Foster's theorem to reveal a dependence of the sheet resistance of dense nanowire networks on the main parameters of such networks. This theorem offers an additional perspective on the effective medium theory and extends our insight. Since the application of Foster's theorem is particularly effective for regular random resistor networks, we propose a method for regularizing resistor networks corresponding to random nanowire networks. We found an analytical dependence of the effective electrical conductivity on the main parameters of the nanowire network (reduced number density of nanowires, nanowire resistance, and resistance of contacts between nanowires).

cond-mat.dis-nn↗
arXiv2025

Phenomenological model of crack patterns in thin colloidal films undergoing desiccation

A number of geometric and topological properties of samples of crack-template based conductive films are examined to assess the degree to which Voronoi diagrams can successfully model structure and conductivity in such networks. Our analysis suggests that although Poisson--Voronoi diagrams are only partially successful in modeling structural features of real-world crack patterns formed in films undergoing desiccation, such diagrams can nevertheless be useful in situations where topological characteristics are more important than geometric ones. A phenomenological model is proposed that is more accurate at capturing features of the real-world crack patterns.

cond-mat.dis-nn↗
arXiv2025

Electrical conductivity of conductive films based on random metallic nanowire networks

Using computer simulation, we investigated the dependence of the electrical conductivity of random two-dimensional systems of straight nanowires on the main parameters. Both the resistance of the conductors and the resistance of the contacts between them were taken into account. The dependence of the resistance, $R$, between network nodes on the distance between nodes, $r$, is $R(r) = R_\Box/π\ln r + \mathrm{const}$, where $R_\Box$ is the sheet resistance.

cond-mat.dis-nn↗
arXiv2024

Lattice model for percolation on a plane of partially aligned sticks with length dispersity

A lattice-based model for continuum percolation is applied to the case of randomly located, partially aligned sticks with unequal lengths in 2D which are allowed to cross each other. Results are obtained for the critical number of sticks per unit area at the percolation threshold in terms of the distributions over length and orientational angle and are compared with findings from computer simulations. Consistent with findings from computer simulations, our model shows that the percolation threshold is (i) elevated by increasing degrees of alignment for a fixed length distribution, and (ii) lowered by increasing degrees of length dispersity for a fixed orientational distribution. The impact of length dispersity is predicted to be governed entirely by the first and second moments of the stick length distribution, and the threshold is shown to be quite sensitive to particulars of the orientational distribution function.

cond-mat.stat-mech↗
arXiv2024

Effective medium theory for the electrical conductance of random resistor networks which mimic crack-template-based transparent conductive films

We studied random resistor networks produced with regular structure and random distribution of edge conductances. These networks are intended to mimic crack-template-based transparent conductive films as well some random networks produced using nano-imprinting technology. Applying an effective medium theory, we found out that the electrical conductance of such networks is $\approx 0.5852 \sqrt{n_E}$, where $n_E$ is the number density of conductive edges. This dependence is in agreement with numerical calculations in Voronoi networks, although the effective conductances are approximately 15\% larger.

cond-mat.dis-nn↗
arXiv2023

Effective electrical conductivity of random resistor networks generated using a Poisson--Voronoi tessellation

We studied the effective electrical conductivity of dense random resistor networks (RRNs) produced using a Voronoi tessellation when its seeds are generated by means of a homogeneous Poisson point process in the two-dimensional Euclidean space. Such RRNs are isotropic and in average homogeneous, however, local fluctuations of the number of edges per unit area are inevitably. These RRNs may mimic, e.g., crack-template-based transparent conductive films. The RRNs were treated within a mean-field approach (MFA). We found an analytical dependency of the effective electrical conductivity on the number of conductive edges (resistors) per unit area, $n_\text{E}$. The effective electrical conductivity is proportional to $\sqrt{n_\text{E}}$ when $n_\text{E} \gg 1$.

cond-mat.dis-nn↗
arXiv2023

Electrical conductivity of crack-template-based transparent conductive films: A computational point of view

Crack-template-based transparent conductive films (TCFs) are promising kinds of junction-free, metallic network electrodes that can be used, e.g., for transparent electromagnetic interference (EMI) shielding. Using image processing of published photos of TCFs, we have analyzed the topological and geometrical properties of such crack templates. Additionally, we analyzed the topological and geometrical properties of some computer-generated networks. We computed the electrical conductance of such networks against the number density of their cracks. Comparison of these computations with predictions of the two analytical approaches revealed the proportionality of the electrical conductance to the square root of the number density of the cracks was found, this being consistent with the theoretical predictions.

cond-mat.dis-nn↗
arXiv2023

Network analysis of verbal communications in the novel The Master and Margarita by M.A.Bulgakov

A network analysis of the structure of verbal communications in one of the most popular Russian novels of the Soviet era The Master and Margarita by Bulgakov has been carried out. The structure of the novel is complex (a story within a story). Moreover, the real-world-characters and the other-world-characters are interacting in the novel. This complex and unusual composition makes the novel especially attractive for a network analysis. In our study, only paired verbal communications (conversations) between explicitly present and acting characters have been taken into account. Based on a character pair verbal communication matrix, a graph has been constructed, the vertices of which are the characters of the novel, while the edges correspond to the connections between them. Taking only paired verbal communications into account leads to the result, that the character network can be described by an ordinary, rather than a directed graph. Since the activity of the conversations was out of our intended scope, the edges have been given no weights. The largest connected component of the graph consists of 76 characters. Centralities, such as degree, betweenness, closeness, eigenvector, and assortativity coefficient were computed to characterize the network. The structure of the communities in the network was also analysed. In addition to the obvious large communities-the characters from the Yershalaim part of the novel and the characters of the Moscow part-the analysis also revealed a fine structure in the Moscow component. Using the analysis of centralities, a group of main characters has been detected. The central characters of the novel are Koroviev, Margarita, Bezdomny, Woland, Behemoth, Azazello, Bosoi, Warenukha, Master, and Levi Matthew.

physics.soc-ph↗
arXiv2023

Percolation and electrical conduction in random systems of curved linear objects on a plane: computer simulations along with a mean-field approach

Using computer simulations, we have studied the percolation and the electrical conductance of two-dimensional, random percolating networks of curved, zero-width metallic nanowires. We mimicked the curved nanowires using circular arcs. The percolation threshold decreased as the aspect ratio of the arcs increased. Comparison with published data on the percolation threshold of symmetric quadratic Bézier curves suggests that, when the percolation of slightly curved wires is simulated, the particular choice of curve to mimic the shape of real-world wires is of little importance. Considering the electrical properties, we took into account both the nanowire resistance per unit length and the junction (nanowire/nanowire contact) resistance. Using a mean-field approximation (MFA), we derived the total electrical conductance of the nanowire-based networks as a function of their geometrical and physical parameters. The MFA predictions have been confirmed by our Monte Carlo numerical simulations. For our random homogeneous and isotropic systems of conductive curved wires, the electric conductance decreased as the wire shape changed from a stick to a ring when the wire length remained fixed.

cond-mat.stat-mech↗
arXiv2022

Transparent electrodes based on mixtures of nanowires and nanorings: A mean-field approach along with computer simulation

We have studied the electrical conductance of two-dimensional (2D) random percolating networks of zero-width metallic nanowires (a mixture of rings and sticks). We toke into account the nanowire resistance per unit length and the junction (nanowire/nanowire contact) resistance. Using a mean-field approximation (MFA) approach, we derived the total electrical conductance of these nanowire-based networks as a function of their geometrical and physical parameters. The MFA predictions have been confirmed by our Monte Carlo (MC) numerical simulations. The MC simulations were focused on the case when the circumferences of the rings and the lengths of the wires were equal. In this case, the electrical conductance of the network was found to be almost insensitive to the relative proportions of the rings and sticks provided that the wire resistance and the junction resistance were equal. When the junction resistance dominated over the wire resistance, a linear dependency of the electrical conductance of the network on the proportions of the rings and sticks was observed.

cond-mat.dis-nn↗
arXiv2022

Random 2D nanowire networks: Finite-size effect and the effect of busbar/nanowire contact resistance on their electrical conductivity

We have studied the resistance of two-dimensional random percolating networks of zero-width metallic nanowires (rings or sticks). We toke into account the nanowire resistance per unit length, the junction (nanowire/nanowire contact) resistance, and the busbar/nanowire contact resistance. Using a mean-field approximation (MFA), we derived the total resistance of the nanoring-based networks as a function of their geometrical and physical parameters. We have proposed a way of accounting for the contribution of the busbar/nanowire contact resistance toward the network resistance. The MFA predictions have been confirmed by our Monte Carlo (MC) numerical simulations. Our study evidenced that the busbar/nanowire contact resistance has a significant effect on the electrical conductivity when the junction resistance dominates over wire resistance.

cond-mat.stat-mech↗
arXiv2022

Invariant percolation properties in random isotropic systems of conductive discorectangles on a plane: From disks to sticks

Recently, some eccentricity-invariant properties of random, isotropic, two-dimensional (2D) systems of conductive ellipses have been reported [Phys. Rev. B \bf{104}, 184205 (2021)]. Moreover, the authors suggested that this invariance might also be observed in systems with other particle geometries having zero-width sticks as the limiting case. To check this suggestion, we studied 2D random systems of isotropically-placed, overlapping, identical discorectangles (stadia) with aspect ratios ranging from 1 (disks) to $\infty$ (zero-width sticks). We analyzed the effect of the aspect ratio and the number density of conductive discorectangles on the behavior of the electrical conductivity, the local conductivity exponent, and the current-carrying backbone. Our own computer simulations demonstrate that some of the properties of random, isotropic 2D systems of conductive discorectangles are insensitive to the aspect ratios of the particles.

cond-mat.stat-mech↗