arXiv subjects

Yun-Hui Liu

Publications and source records attributed to Yun-Hui Liu.

66 records · Page 4Linked to original sources

arXiv2021

Relational Graph Learning on Visual and Kinematics Embeddings for Accurate Gesture Recognition in Robotic Surgery

Automatic surgical gesture recognition is fundamentally important to enable intelligent cognitive assistance in robotic surgery. With recent advancement in robot-assisted minimally invasive surgery, rich information including surgical videos and robotic kinematics can be recorded, which provide complementary knowledge for understanding surgical gestures. However, existing methods either solely adopt uni-modal data or directly concatenate multi-modal representations, which can not sufficiently exploit the informative correlations inherent in visual and kinematics data to boost gesture recognition accuracies. In this regard, we propose a novel online approach of multi-modal relational graph network (i.e., MRG-Net) to dynamically integrate visual and kinematics information through interactive message propagation in the latent feature space. In specific, we first extract embeddings from video and kinematics sequences with temporal convolutional networks and LSTM units. Next, we identify multi-relations in these multi-modal embeddings and leverage them through a hierarchical relational graph learning module. The effectiveness of our method is demonstrated with state-of-the-art results on the public JIGSAWS dataset, outperforming current uni-modal and multi-modal methods on both suturing and knot typing tasks. Furthermore, we validated our method on in-house visual-kinematics datasets collected with da Vinci Research Kit (dVRK) platforms in two centers, with consistent promising performance achieved.

cs.CV↗

arXiv2021

One to Many: Adaptive Instrument Segmentation via Meta Learning and Dynamic Online Adaptation in Robotic Surgical Video

Surgical instrument segmentation in robot-assisted surgery (RAS) - especially that using learning-based models - relies on the assumption that training and testing videos are sampled from the same domain. However, it is impractical and expensive to collect and annotate sufficient data from every new domain. To greatly increase the label efficiency, we explore a new problem, i.e., adaptive instrument segmentation, which is to effectively adapt one source model to new robotic surgical videos from multiple target domains, only given the annotated instruments in the first frame. We propose MDAL, a meta-learning based dynamic online adaptive learning scheme with a two-stage framework to fast adapt the model parameters on the first frame and partial subsequent frames while predicting the results. MDAL learns the general knowledge of instruments and the fast adaptation ability through the video-specific meta-learning paradigm. The added gradient gate excludes the noisy supervision from pseudo masks for dynamic online adaptation on target videos. We demonstrate empirically that MDAL outperforms other state-of-the-art methods on two datasets (including a real-world RAS dataset). The promising performance on ex-vivo scenes also benefits the downstream tasks such as robot-assisted suturing and camera control.

cs.CV↗

arXiv2020

Self-supervised Video Representation Learning by Pace Prediction

This paper addresses the problem of self-supervised video representation learning from a new perspective -- by video pace prediction. It stems from the observation that human visual system is sensitive to video pace, e.g., slow motion, a widely used technique in film making. Specifically, given a video played in natural pace, we randomly sample training clips in different paces and ask a neural network to identify the pace for each video clip. The assumption here is that the network can only succeed in such a pace reasoning task when it understands the underlying video content and learns representative spatio-temporal features. In addition, we further introduce contrastive learning to push the model towards discriminating different paces by maximizing the agreement on similar video content. To validate the effectiveness of the proposed method, we conduct extensive experiments on action recognition and video retrieval tasks with several alternative network architectures. Experimental evaluations show that our approach achieves state-of-the-art performance for self-supervised video representation learning across different network architectures and different benchmarks. The code and pre-trained models are available at https://github.com/laura-wang/video-pace.

cs.CV↗

arXiv2020

A Learning-Driven Framework with Spatial Optimization For Surgical Suture Thread Reconstruction and Autonomous Grasping Under Multiple Topologies and Environmental Noises

Surgical knot tying is one of the most fundamental and important procedures in surgery, and a high-quality knot can significantly benefit the postoperative recovery of the patient. However, a longtime operation may easily cause fatigue to surgeons, especially during the tedious wound closure task. In this paper, we present a vision-based method to automate the suture thread grasping, which is a sub-task in surgical knot tying and an intermediate step between the stitching and looping manipulations. To achieve this goal, the acquisition of a suture's three-dimensional (3D) information is critical. Towards this objective, we adopt a transfer-learning strategy first to fine-tune a pre-trained model by learning the information from large legacy surgical data and images obtained by the on-site equipment. Thus, a robust suture segmentation can be achieved regardless of inherent environment noises. We further leverage a searching strategy with termination policies for a suture's sequence inference based on the analysis of multiple topologies. Exact results of the pixel-level sequence along a suture can be obtained, and they can be further applied for a 3D shape reconstruction using our optimized shortest path approach. The grasping point considering the suturing criterion can be ultimately acquired. Experiments regarding the suture 2D segmentation and ordering sequence inference under environmental noises were extensively evaluated. Results related to the automated grasping operation were demonstrated by simulations in V-REP and by robot experiments using Universal Robot (UR) together with the da Vinci Research Kit (dVRK) adopting our learning-driven framework.

cs.RO↗

arXiv2020

A Versatile Data-Driven Framework for Model-Independent Control of Continuum Manipulators Interacting With Obstructed Environments With Unknown Geometry and Stiffness

This paper addresses the problem of controlling a continuum manipulator (CM) in free or obstructed environments with no prior knowledge about the deformation behavior of the CM and the stiffness and geometry of the interacting obstructed environment. We propose a versatile data-driven priori-model-independent (PMI) control framework, in which various control paradigms (e.g. CM's position or shape control) can be defined based on the provided feedback. This optimal iterative algorithm learns the deformation behavior of the CM in interaction with an unknown environment, in real time, and then accomplishes the defined control objective. To evaluate the scalability of the proposed framework, we integrated two different CMs, designed for medical applications, with the da Vinci Research Kit (dVRK). The performance and learning capability of the framework was investigated in 11 sets of experiments including PMI position and shape control in free and unknown obstructed environments as well as during manipulation of an unknown deformable object. We also evaluated the performance of our algorithm in an ex-vivo experiment with a lamb heart.The theoretical and experimental results demonstrate the adaptivity, versatility, and accuracy of the proposed framework and, therefore, its suitability for a variety of applications involving continuum manipulators.

cs.RO↗

arXiv2019

HMTNet:3D Hand Pose Estimation from Single Depth Image Based on Hand Morphological Topology

Thanks to the rapid development of CNNs and depth sensors, great progress has been made in 3D hand pose estimation. Nevertheless, it is still far from being solved for its cluttered circumstance and severe self-occlusion of hand. In this paper, we propose a method that takes advantage of human hand morphological topology (HMT) structure to improve the pose estimation performance. The main contributions of our work can be listed as below. Firstly, in order to extract more powerful features, we concatenate original and last layer of initial feature extraction module to preserve hand information better. Next, regression module inspired from hand morphological topology is proposed. In this submodule, we design a tree-like network structure according to hand joints distribution to make use of high order dependency of hand joints. Lastly, we conducted sufficient ablation experiments to verify our proposed method on each dataset. Experimental results on three popular hand pose dataset show superior performance of our method compared with the state-of-the-art methods. On ICVL and NYU dataset, our method outperforms great improvement over 2D state-of-the-art methods. On MSRA dataset, our method achieves comparable accuracy with the state-of-the-art methods. To summarize, our method is the most efficient method which can run at 220:7 fps on a single GPU compared with approximate accurate methods at present. The code will be available at.

cs.RO↗

arXiv2019

Modelling and Dynamic Tracking Control of Industrial Vehicles with Tractor-trailer Structure

Existing works on control of tractor-trailers systems only consider the kinematics model without taking dynamics into account. Also, most of them treat the issue as a pure control theory problem whose solutions are difficult to implement. This paper presents a trajectory tracking control approach for a full-scale industrial tractor-trailers vehicle composed of a car-like tractor and arbitrary number of passive full trailers. To deal with dynamic effects of trailing units, a force sensor is innovatively installed at the connection between the tractor and the first trailer to measure the forces acting on the tractor. The tractor's dynamic model that explicitly accounts for the measured forces is derived. A tracking controller that compensates the pulling/pushing forces in real time and simultaneously drives the system onto desired trajectories is proposed. The propulsion map between throttle opening and the propulsion force is proposed to be modeled with a fifth-order polynomial. The parameters are estimated by fitting experimental data, in order to provide accurate driving force. Stability of the control algorithm is rigorously proved by Lyapunov methods. Experiments of full-size vehicles are conducted to validate the performance of the control approach.

eess.SY↗

arXiv2019

Pose Estimation for Texture-less Shiny Objects in a Single RGB Image Using Synthetic Training Data

In the industrial domain, the pose estimation of multiple texture-less shiny parts is a valuable but challenging task. In this particular scenario, it is impractical to utilize keypoints or other texture information because most of them are not actual features of the target but the reflections of surroundings. Moreover, the similarity of color also poses a challenge in segmentation. In this article, we propose to divide the pose estimation process into three stages: object detection, features detection and pose optimization. A convolutional neural network was utilized to perform object detection. Concerning the reliability of surface texture, we leveraged the contour information for estimating pose. Since conventional contour-based methods are inapplicable to clustered metal parts due to the difficulties in segmentation, we use the dense discrete points along the metal part edges as semantic keypoints for contour detection. Afterward, we exploit both keypoint information and CAD model to calculate the 6D pose of each object in view. A typical implementation of deep learning methods not only requires a large amount of training data, but also relies on intensive human labor for labeling the datasets. Therefore, we propose an approach to generate datasets and label them automatically. Despite not using any real-world photos for training, a series of experiments showed that the algorithm built on synthetic data perform well in the real environment.

cs.RO↗

arXiv2019

LPD-Net: 3D Point Cloud Learning for Large-Scale Place Recognition and Environment Analysis

Point cloud based place recognition is still an open issue due to the difficulty in extracting local features from the raw 3D point cloud and generating the global descriptor, and it's even harder in the large-scale dynamic environments. In this paper, we develop a novel deep neural network, named LPD-Net (Large-scale Place Description Network), which can extract discriminative and generalizable global descriptors from the raw 3D point cloud. Two modules, the adaptive local feature extraction module and the graph-based neighborhood aggregation module, are proposed, which contribute to extract the local structures and reveal the spatial distribution of local features in the large-scale point cloud, with an end-to-end manner. We implement the proposed global descriptor in solving point cloud based retrieval tasks to achieve the large-scale place recognition. Comparison results show that our LPD-Net is much better than PointNetVLAD and reaches the state-of-the-art. We also compare our LPD-Net with the vision-based solutions to show the robustness of our approach to different weather and light conditions.

cs.CV↗

arXiv2019

SeqLPD: Sequence Matching Enhanced Loop-Closure Detection Based on Large-Scale Point Cloud Description for Self-Driving Vehicles

Place recognition and loop-closure detection are main challenges in the localization, mapping and navigation tasks of self-driving vehicles. In this paper, we solve the loop-closure detection problem by incorporating the deep-learning based point cloud description method and the coarse-to-fine sequence matching strategy. More specifically, we propose a deep neural network to extract a global descriptor from the original large-scale 3D point cloud, then based on which, a typical place analysis approach is presented to investigate the feature space distribution of the global descriptors and select several super keyframes. Finally, a coarse-to-fine strategy, which includes a super keyframe based coarse matching stage and a local sequence matching stage, is presented to ensure the loop-closure detection accuracy and real-time performance simultaneously. Thanks to the sequence matching operation, the proposed approach obtains an improvement against the existing deep-learning based methods. Experiment results on a self-driving vehicle validate the effectiveness of the proposed loop-closure detection algorithm.

cs.CV↗

arXiv2019

Coordinating Large-Scale Robot Networks with Motion and Communication Uncertainties for Logistics Applications

In this paper, we focus on the problem of task allocation, cooperative path planning and motion coordination of the large-scale system with thousands of robots, aiming for practical applications in robotic warehouses and automated logistics systems. Particularly, we solve the life-long planning problem and guarantee the coordination performance of large-scale robot network in the presence of robot motion uncertainties and communication failures. A hierarchical planning and coordination structure is presented. The environment is divided into several sectors and a dynamic traffic heat-map is generated to describe the current sector-level traffic flow. In task planning level, a greedy task allocation method is implemented to assign the current task to the nearest free robot and the sector-level path is generated by comprehensively considering the traveling distance, the traffic heat-value distribution and the current robot/communication failures. In motion coordination level, local cooperative A* algorithm is implemented in each sector to generate the collision-free road-level path of each robot in the sector and the rolling planning structure is introduced to solve problems caused by motion and communication uncertainties. The effectiveness and practical applicability of the proposed approach are validated by large-scale simulations with more than one thousand robots and real laboratory experiments.

cs.RO↗

arXiv2019

Development of an Autonomous Sanding Robot with Structured-Light Technology

Large demand for robotics and automation has been reflected in the sanding works, as current manual operations are labor-intensive, without consistent quality, and also subject to safety and health issues. While several machines have been developed to automate one or two steps in the sanding works, the autonomous capability of existing solutions is relatively low, and the human assistance or supervision is still heavily required in the calibration of target objects or the planning of robot motion and tasks. This paper presents the development of an autonomous sanding robot, which is able to perform the sanding works on an unknown object automatically, without any prior calibration or human intervention. The developed robot works as follows. First, the target object is scanned then modeled with the structured-light camera. Second, the robot motion is planned to cover all the surfaces of the object with an optimized transition sequence. Third, the robot is controlled to perform the sanding on the object under the desired impedance model. A prototype of the sanding robot is fabricated and its performance is validated in the task of sanding a batch of wooden boxes. With sufficient degrees of freedom (DOFs) and the module design for the end effector, the developed robot is able to provide a general solution to the autonomous sanding on many other different objects.

eess.SY↗