arXiv subjects

Yue Wu

Publications and source records attributed to Yue Wu.

At least 433 records · Page 24Linked to original sources

arXiv2015

Determining the local dark matter density with LAMOST data

Measurement of the local dark matter density plays an important role in both Galactic dynamics and dark matter direct detection experiments. However, the estimated values from previous works are far from agreeing with each other. In this work, we provide a well-defined observed sample with 1427 G \& K type main-sequence stars from the LAMOST spectroscopic survey, taking into account selection effects, volume completeness, and the stellar populations. We apply a vertical Jeans equation method containing a single exponential stellar disk, a razor thin gas disk, and a constant dark matter density distribution to the sample, and obtain a total surface mass density of $\rm {78.7 ^{+3.9}_{-4.7}\ M_{\odot}\ pc^{-2}}$ up to 1 kpc and a local dark matter density of $0.0159^{+0.0047}_{-0.0057}\,\rm M_{\odot}\,\rm pc^{-3}$. We find that the sampling density (i.e. number of stars per unit volume) of the spectroscopic data contributes to about two-thirds of the uncertainty in the estimated values. We discuss the effect of the tilt term in the Jeans equation and find it has little impact on our measurement. Other issues, such as a non-equilibrium component due to perturbations and contamination by the thick disk population, are also discussed.

astro-ph.GA↗

arXiv2015

The K giant stars from the LAMOST survey data II: the Hercules stream in radial migration

We estimate the age for the individual stars located at the lower part of the red giant branch from the LAMOST DR2 K giant sample. Taking into account the selection effects and the volume completeness, the age--metallicity map for the stars located between 0.3 and 1.5 kpc from the Sun is obtained. A significant substructure (denoted as the \it{narrow stripe}) located from (age, [Fe/H])$\sim$(5, 0.4) to (10 Gyr, -0.4 dex) in the age--metallicity map is clearly identified. Moreover, the \it{narrow stripe} stars are found the dominate contributors to several velocity substructures, including the well-known Hercules stream. The substantially large difference between the observed guiding-center radii and the birth radii inferred from the age--metallicity relation is evident that the \it{narrow stripe} stars have been radially migrated from about R$\sim4$ kpc to the solar neighborhood. This implies that the Hercules stream may not be owe to the resonance associated with the bar, but may be the kinematic imprint of the inner disk and later moved out due to radial migration. We estimate that the traveling speed of the radial migration are roughly 1.1$\pm0.1$ kpc Gyr$^{-1}$, equivalent with about $1.1\pm0.1$ km s$^{-1}$. This is in agreement with the median $v_R$ of $2.6^{+1.8}_{-1.9}$ km s$^{-1}$ of the \it{narrow stripe}. We also obtain that about one third stars in the solar neighborhood are radially migrated from around 4 kpc. Finally, we find that the radial migration does not lead to additional disk thickening according to the distribution of $z_{max}$.

astro-ph.GA↗

arXiv2015

Validation of LAMOST Stellar Parameters with the PASTEL Catalog

Recently the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) published its first data release (DR1), which is ranked as the largest stellar spectra dataset in the world so far. We combine the PASTEL catalog and SIMBAD radial velocities as a testing standard to validate the DR1 stellar parameters (effective temperature $T_{\mathrm{eff}}$, surface gravity $\log g$, metallicity $\mathrm{[Fe/H]}$ and radial velocity $V_{\mathrm{r}}$). Through cross-identification of the DR1 catalogs and the PASTEL catalog, we obtain a preliminary sample of 422 stars. After removal of stellar parameter measurements from problematic spectra and applying effective temperature constraints to the sample, we compare the stellar parameters from DR1 with those from PASTEL and SIMBAD to prove that the DR1 results are reliable in restricted $T_{\mathrm{eff}}$ ranges. We derive standard deviations of 110 K, 0.19 dex, 0.11 dex and 4.91 $\mathrm{km\,s^{-1}}$ , for $T_{\mathrm{eff}}$, $\log g$, $[\mathrm{Fe/H}]$ when $T_{\mathrm{eff}}<8000\,\mathrm{K}$, and for $V_{\mathrm{r}}$ when $T_{\mathrm{eff}}<10000\,\mathrm{K}$, respectively. Systematic errors are negligible except for that of $V_{\mathrm{r}}$. Besides, metallicities in DR1 are systematically higher than those in PASTEL, in the range of PASTEL $[\mathrm{Fe/H}]<-1.5$.

astro-ph.SR↗

arXiv2015

The stellar kinematics in the solar neighborhood from LAMOST data

We use about 200,000 FGK type main-sequence stars from the LAMOST DR1 data to map the local stellar kinematics. With the velocity de-projection technique, we are able to derive the averaged 3 dimensional velocity and velocity ellipsoids using only the line-of-sight velocity for the stars with various effective temperatures within $100 < |z| < 500$ pc. Using the mean velocities of the cool stars, we derive the solar motion of ($U_{\!\odot}$, $V_{\!\odot}$, $W_{\!\odot}$)=(9.58$\pm2.39$, 10.52$\pm1.96$, 7.01$\pm1.67$)$km\,s^{-1}$ with respect to the local standard of rest. Moreover, we find that the stars with ${T}_{\rm eff}>6000$K show a net asymmetric motion of $\sim3 km\,s^{-1}$ in $\langle W\rangle$ compared to the stars with ${T}_{\rm eff}<6000$K. And their azimuthal velocity increases when $|z|$ increases. This peculiar motion in the warmer stars is likely because they are young and not completely relaxed, although other reasons, such as the resonance induced by the central rotating bar or the spiral structures, and the perturbation of the merging dwarf galaxies, can not be ruled out. The derived velocity dispersions and cross terms for the data are approximately consistent with previous studies. We also find that the vertical gradients of $σ_{U}$ and $σ_V$ are larger than that of $σ_W$ . And the vertical gradient of $σ_U$ shows clear correlation with ${T}_{\rm eff}$, while the other two do not. Finally, our sample shows vertex deviation of about 11$^\circ$, at $300 < |z| < 500$pc, but roughly zero at $100 < |z| < 300$pc.

astro-ph.GA↗

arXiv2015

Model-Free 3D Reconstruction of Weld Joint Using Laser Scanning

This article presents a novel utilization of the concept of entropy in information theory to model-free 3D reconstruction of weld joint in presence of noise. We show that our formulation attains its global minimum at the upper edge of this joint. This property significantly simplifies the extraction of this welding joint. Furthermore, we present an approach to compute the volume of this extracted space to facilitate the monitoring of the progress of the welding task. Moreover, we provide a preliminary analysis of the effect of variation of the noise on the extraction process of this space to realize the impact of this noise on the computation of its area and volume.

cs.RO↗

arXiv2015

An Adaptive Sampling Approach to 3D Reconstruction of Weld Joint

We present an adaptive sampling approach to 3D reconstruction of the welding joint using the point cloud that is generated by a laser sensor. We start with a randomized strategy to approximate the surface of the volume of interest through selection of a number of pivotal candidates. Furthermore, we introduce three proposal distributions over the neighborhood of each of these pivots to adaptively sample from their neighbors to refine the original randomized approximation to incrementally reconstruct this welding space. We prevent our algorithm from being trapped in a neighborhood via permanently labeling the visited samples. In addition, we accumulate the accepted candidates along with their selected neighbors in a queue structure to allow every selected sample to contribute to the evolution of the reconstructed welding space as the algorithm progresses. We analyze the performance of our adaptive sampling algorithm in contrast to the random sampling, with and without replacement, to show a significant improvement in total number of samples that are drawn to identify the region of interest, thereby expanding upon neighboring samples to extract the entire region in a fewer iterations and a shorter computation time.

cs.RO↗

arXiv2015

Member candidates of the star clusters from LAMOST DR2 data

In this work, we provide 2189 photometric- and kinematic-selected member candidates of 24 star clusters from the LAMOST DR2 catalog. We perform two-step membership identification: selection along the stellar track in the color-magnitude diagram, i.e., photometric identification, and the selection from the distribution of radial velocities, i.e. the kinematic identification. We find that the radial velocity from the LAMOST data are very helpful in the membership identification. The mean probability of membership is 40\% for the radial velocity selected sample. With these 24 star clusters, we investigate the performance of the radial velocity and metallicity estimated in the LAMOST pipeline. We find that the systematic offset in radial velocity and metallicity are $0.85\pm1.26$\,\kms\ and $-0.08\pm0.04$\,dex, with dispersions of $5.47_{-0.71}^{+1.16}$\,\kms\ and $0.13_{-0.02}^{+0.04}$\,dex, respectively. Finally, we propose that the photometric member candidates of the clusters covered by the LAMOST footprints should be assigned higher priority so that more member stars can be observed.

astro-ph.SR↗

arXiv2015

19 low mass hyper-velocity star candidates from the first data release of LAMOST survey

Hyper-velocity stars are believed to be ejected out from the Galactic center through dynamical interactions between (binary) stars and the central massive black hole(s). In this paper, we report 19 low mass F/G/K type hyper-velocity star candidates from over one mil- lion stars of the first data release of the LAMOST general survey. We determine the unbound probability for each candidate using a Monte-Carlo simulation by assuming a non-Gaussian proper-motion error distribution, Gaussian heliocentric distance and radial velocity error dis- tributions. The simulation results show that all the candidates have unbound possibilities over 50% as expected, and one of them may even exceed escape velocity with over 90% probabili- ty. In addition, we compare the metallicities of our candidates with the metallicity distribution functions of the Galactic bulge, disk, halo and globular cluster, and conclude that the Galactic bulge or disk is likely the birth place for our candidates.

astro-ph.GA↗

arXiv2015

The first symbiotic stars from the LAMOST survey

Symbiotic stars are interacting binary systems with the longest orbital periods. They are typically formed by a white dwarf, a red giant and a nebula. These objects are natural astrophysical laboratories for studying the evolution of binaries. Current estimates of the population of Milky Way symbiotic stars vary from 3000 up to 400000. However, the current census is less than 300. The Large sky Area Multi-Object fiber Spectroscopic Telescope (LAMOST) survey can obtain hundreds of thousands of stellar spectra per year, providing a good opportunity to search for new symbiotic stars. In this work we detect 4 of such binaries among 4,147,802 spectra released by the LAMOST, of which two are new identifications. The first is LAMOST J12280490-014825.7, considered to be an S-type halo symbiotic star. The second is LAMOST J202629.80+423652.0, a D-type symbiotic star.

astro-ph.GA↗

arXiv2015

Red Clump Stars from the LAMOST data I: identification and distance

We present a sample of about 120,000 red clump candidates selected from the LAMOST DR2 catalog based on the empirical distribution model in the effective temperature vs. surface gravity plane. Although, in general, red clump stars are considered as the standard candle, they do not exactly stay in a narrow range of absolute magnitude, but may extend to more than 1 magnitude depending on their initial mass. Consequently, conventional oversimplified distance estimations with assumption of fixed luminosity may lead to systematic bias related to the initial mass or the age, which may potentially affect the study of the evolution of the Galaxy with red clump stars. We therefore employ an isochrone-based method to estimate the absolute magnitude of red clump stars from their observed surface gravities, effective temperatures, and metallicities. We verify that the estimation well removes the systematics and provide an initial mass/age independent distance estimates with accuracy less than 10%.

astro-ph.GA↗

arXiv2015

Estimation of distances to stars with stellar parameters from LAMOST

We present a method to estimate distances to stars with spectroscopically derived stellar parameters. The technique is a Bayesian approach with likelihood estimated via comparison of measured parameters to a grid of stellar isochrones, and returns a posterior probability density function for each star's absolute magnitude. This technique is tailored specifically to data from the Large Sky Area Multi-object Fiber Spectroscopic Telescope (LAMOST) survey. Because LAMOST obtains roughly 3000 stellar spectra simultaneously within each ~5-degree diameter "plate" that is observed, we can use the stellar parameters of the observed stars to account for the stellar luminosity function and target selection effects. This removes biasing assumptions about the underlying populations, both due to predictions of the luminosity function from stellar evolution modeling, and from Galactic models of stellar populations along each line of sight. Using calibration data of stars with known distances and stellar parameters, we show that our method recovers distances for most stars within ~20%, but with some systematic overestimation of distances to halo giants. We apply our code to the LAMOST database, and show that the current precision of LAMOST stellar parameters permits measurements of distances with ~40% error bars. This precision should improve as the LAMOST data pipelines continue to be refined.

astro-ph.GA↗

arXiv2015

Asteroseismic based estimation of the surface gravity for the LAMOST giant stars

Asteroseismology is one of the most accurate approaches to estimate the surface gravity of a star. However, most of the data from the current spectroscopic surveys do not have asteroseismic measurements, which is very expensive and time consuming. In order to improve the spectroscopic surface gravity estimates for a large amount of survey data with the help of the small subset of the data with seismic measurements, we set up a support vector regression model for the estimation of the surface gravity supervised by 1,374 LAMOST giant stars with Kepler seismic surface gravity. The new approach can reduce the uncertainty of the estimates down to about 0.1 dex, which is better than the LAMOST pipeline by at least a factor of 2, for the spectra with signal-to-noise ratio higher than 20. Compared with the logg estimated from the LAMOST pipeline, the revised logg values provide a significantly improved match to the expected distribution of red clump and RGB stars from stellar isochrones. Moreover, even the red bump stars, which extend to only about 0.1 dex in logg, can be discriminated from the new estimated surface gravity. The method is then applied to about 350,000 LAMOST metal-rich giant stars to provide improved surface gravity estimates. In general, the uncertainty of the distance estimate based on the SVR surface gravity can be reduced to about 12% for the LAMOST data.

astro-ph.IM↗

arXiv2015

Learning Document Image Binarization from Data

In this paper we present a fully trainable binarization solution for degraded document images. Unlike previous attempts that often used simple features with a series of pre- and post-processing, our solution encodes all heuristics about whether or not a pixel is foreground text into a high-dimensional feature vector and learns a more complicated decision function. In particular, we prepare features of three types: 1) existing features for binarization such as intensity [1], contrast [2], [3], and Laplacian [4], [5]; 2) reformulated features from existing binarization decision functions such those in [6] and [7]; and 3) our newly developed features, namely the Logarithm Intensity Percentile (LIP) and the Relative Darkness Index (RDI). Our initial experimental results show that using only selected samples (about 1.5% of all available training data), we can achieve a binarization performance comparable to those fine-tuned (typically by hand), state-of-the-art methods. Additionally, the trained document binarization classifier shows good generalization capabilities on out-of-domain data.

cs.CV↗

arXiv2015

Whirly 3-Interval Exchange Transformations

Irreducible interval exchange transformations are studied with regard to whirly property, a condition for non-trivial spatial factor. Uniformly whirly transformation is defined and to be further studied. An equivalent condition is introduced for whirly transformation. We will prove that almost all 3-interval exchange transformations are whirly, using a combinatorics approach with application of the Rauzy-Veech Induction. It is still an open question whether whirly property is a generic property for m-interval exchange transformations (m>=4).

math.DS↗

arXiv2015

Electroneutrality Breakdown and Specific Ion Effects in Nanoconfined Aqueous Electrolytes Observed by NMR

Ion distribution in aqueous electrolytes near the interface plays critical roles in electrochemical, biological and colloidal systems and is expected to be particularly significant inside nanoconfined regions. Electroneutrality of the total charge inside nanoconfined regions is commonly assumed a priori in solving ion distribution of aqueous electrolytes nanoconfined by uncharged hydrophobic surfaces with no direct experimental validation. Here, we use a quantitative nuclear magnetic resonance approach to investigate the properties of aqueous electrolytes nanoconfined in graphitic-like nanoporous carbon. Substantial electroneutrality breakdown in nanoconfined regions and very asymmetric responses of cations and anions to the charging of nanoconfining surfaces are observed. The electroneutrality breakdown is shown to depend strongly on the propensity of anions toward the water-carbon interface and such ion-specific response follows generally the anion ranking of the Hofmeister series. The experimental observations are further supported by numerical evaluation using the generalized Poisson-Boltzmann equation

cond-mat.soft↗

arXiv2014

The LAMOST Stellar Parameter Pipeline at Peking University --- LSP3

We introduce the LAMOST Stellar Parameter Pipeline at Peking University --- LSP3, developed and implemented for the determinations of radial velocity $V_{\rm r}$ and stellar atmospheric parameters (effective temperature $T_{\rm eff}$, surface gravity log\,$g$, metallicity [Fe/H]) for the LAMOST Spectroscopic Survey of the Galactic Anti-center (LSS-GAC). We describe the algorithms of LSP3 and examine the accuracy of parameters yielded by it. The precision and accuracy of parameters yielded are investigated by comparing results of multi-epoch observations and of candidate members of open and globular clusters, with photometric calibration, as well as with independent determinations available from a number of external databases, including the PASTEL archive, the APOGEE, SDSS and RAVE surveys, as well as those released in the LAMOST DR1. The uncertainties of LSP3 parameters are characterized and quantified as a function of the spectral signal-to-noise ratio (SNR) and stellar atmospheric parameters. We conclude that the current implementation of LSP3 has achieved an accuracy of 5.0\,km\,s$^{-1}$, 150\,K, 0.25\,dex, 0.15\,dex for the radial velocity, effective temperature, surface gravity and metallicity, respectively, for LSS-GAC spectra of FGK stars of SNRs per pixel higher than 10. The LSP3 has been applied to over a million LSS-GAC spectra collected hitherto. Stellar parameters yielded by the LSP3 will be released to the general public following the data policy of LAMOST, together with estimates of the interstellar extinction $E(B-V)$ and stellar distances, deduced by combining spectroscopic and multi-band photometric measurements using a variety of techniques.

astro-ph.GA↗

arXiv2014

Flux-free growth of large superconducting crystal of FeSe by traveling-solvent floating-zone technique

A flux-free solution to the growth of large and composition homogeneous superconducting FeSe crystal is reported for the first time, which is based on the traveling-solvent floating-zone technique. The size of the crystal samples prepared by this approach is up to 15x6x2 mm3, being far bigger than previously reported in all dimensions, and the main phase of the crystals is of a single preferred orientation along the tetragonal (101) plane. X-ray diffraction analysis identifies the main phase to be the superconducting tetragonal \b{eta}-FeSe. The superconducting transition temperature (TC) is determined to be 9.4 K by AC magnetic susceptibility and electronic transport measurements. A nearly perfect diamagnetic shielding of -97% is observed, indicating a bulk superconductivity in the crystal sample.

cond-mat.supr-con↗

arXiv2014

Automatic stellar spectral parameterization pipeline for LAMOST survey

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) project performed its five year formal survey since Sep. 2012, already fulfilled the pilot survey and the 1st two years general survey with an output - spectroscopic data archive containing about 3.5 million observations. One of the scientific objectives of the project is for better understanding the structure and evolution of the Milky Way. Thus, credible derivation of the physical properties of the stars plays a key role for the exploration. We developed and implemented the LAMOST stellar parameter pipeline (LASP) which can automatically determine the fundamental stellar atmospheric parameters (effective temperature Teff, surface gravity log g, metallicity [Fe/H], radial velocity Vr) for late A, FGK type stars observed during the survey. An overview of the LASP, including the strategy, the algorithm and the process is presented in this work.

astro-ph.IM↗