arXiv subjects

Yue Li

Publications and source records attributed to Yue Li.

At least 325 records · Page 18Linked to original sources

arXiv2022

Observation of spin-tensor induced topological phase transitions of triply degenerate points with a trapped ion

Triply degenerate points (TDPs), which correspond to new types of topological semimetals, can support novel quasiparticles possessing effective integer spins while preserving Fermi statistics. Here by mapping the momentum space to the parameter space of a three-level system in a trapped ion, we experimentally explore the transitions between different types of TDPs driven by spin-tensor--momentum couplings. We observe the phase transitions between TDPs with different topological charges by measuring the Berry flux on a loop surrounding the gap-closing lines, and the jump of the Berry flux gives the jump of the topological charge (up to a $2π$ factor) across the transitions. For the Berry flux measurement, we employ a new method by examining the geometric rotations of both spin vectors and tensors, which lead to a generalized solid angle equal to the Berry flux. The controllability of multi-level ion offers a versatile platform to study high-spin physics and our work paves the way to explore novel topological phenomena therein.

quant-ph↗

arXiv2022

Experimental Demonstration of Swift Analytical Universal Control over Nearby Transitions

Along with the scaling of dimensions in quantum systems, transitions between the system's energy levels would become close in frequency, which are conventionally resolved by weak and lengthy pulses. Here, we extend and experimentally demonstrate analytically based swift quantum control techniques on a four-level trapped ion system, where we perform individual or simultaneous control over two pairs of spectrally nearby transitions with tailored time-varied drive, achieving operational fidelities ranging from 99.2(3)\% to 99.6(3)\%. Remarkably, we achieve approximately an order of magnitude speed up comparing with the case of weak square pulse for a general control. Therefore, our demonstration may be beneficial to a broad range of quantum systems with crowded spectrum, for spectroscopy, quantum information processing and quantum simulation.

quant-ph↗

arXiv2022

Global weak solutions to the Vlasov-Poisson-Fokker-Planck-Navier-Stokes system

We consider the compressible Vlasov-Poisson-Fokker-Planck-Navier-Stokes system in a three dimensional bounded domain with nonhomogeneous Dirichlet boundary conditions. The system describes the evolution of charged particles ensemble dispersed in an isentropic fluid. For the adiabatic coefficient $γ>3/2$, we establish the global existence of weak solutions to this system with arbitrary large initial and boundary data.

math.AP↗

arXiv2021

Revealing curvature and stochastic effects on grain growth kinetics: A thermodynamic perspective from the extremal principle

In the theoretical development of normal grain growth, the roles of "drift" (curvature effect) and "diffusion" (stochastic effect) have been an open question for many years. By coupling contributions of microstructure entropy and grain topological interactions with thermodynamic extremal principle (TEP), this letter extends the existing thermodynamic framework of grain growth. It not only explains the curvature and stochastic effects by thermodynamics but provides a new mean-field model for grain growth. Through thermodynamic modification, this new model can yield a high accuracy representation of existing ultra-large phase-field simulated results.

cond-mat.mtrl-sci↗

arXiv2021

Change of quantum correlation for two simultaneously accelerated observers

The influence of Unruh effect on the quantum and classical correlation of a quantum entangled state is investigated, when one or two of the observers are accelerated. It is found that the quantum and classical correlation would approach to a finite value with the increase of the acceleration when only one observer is accelerated, but they would decrease to zero quickly when two observers are accelerated. The latter result implies that the gravitational field would break the correlation obviously when the acceleration is caused by the gravitational field. Thus, when the two observers stay in the gravitational field, the quantum or classical correlation would not easy to be preserved for a long time.

gr-qc↗

arXiv2021

NTopo: Mesh-free Topology Optimization using Implicit Neural Representations

Recent advances in implicit neural representations show great promise when it comes to generating numerical solutions to partial differential equations. Compared to conventional alternatives, such representations employ parameterized neural networks to define, in a mesh-free manner, signals that are highly-detailed, continuous, and fully differentiable. In this work, we present a novel machine learning approach for topology optimization -- an important class of inverse problems with high-dimensional parameter spaces and highly nonlinear objective landscapes. To effectively leverage neural representations in the context of mesh-free topology optimization, we use multilayer perceptrons to parameterize both density and displacement fields. Our experiments indicate that our method is highly competitive for minimizing structural compliance objectives, and it enables self-supervised learning of continuous solution spaces for topology optimization problems.

cs.LG↗

arXiv2021

Minimum $\ell_{1}$-norm interpolators: Precise asymptotics and multiple descent

An evolving line of machine learning works observe empirical evidence that suggests interpolating estimators -- the ones that achieve zero training error -- may not necessarily be harmful. This paper pursues theoretical understanding for an important type of interpolators: the minimum $\ell_{1}$-norm interpolator, which is motivated by the observation that several learning algorithms favor low $\ell_1$-norm solutions in the over-parameterized regime. Concretely, we consider the noisy sparse regression model under Gaussian design, focusing on linear sparsity and high-dimensional asymptotics (so that both the number of features and the sparsity level scale proportionally with the sample size). We observe, and provide rigorous theoretical justification for, a curious multi-descent phenomenon; that is, the generalization risk of the minimum $\ell_1$-norm interpolator undergoes multiple (and possibly more than two) phases of descent and ascent as one increases the model capacity. This phenomenon stems from the special structure of the minimum $\ell_1$-norm interpolator as well as the delicate interplay between the over-parameterized ratio and the sparsity, thus unveiling a fundamental distinction in geometry from the minimum $\ell_2$-norm interpolator. Our finding is built upon an exact characterization of the risk behavior, which is governed by a system of two non-linear equations with two unknowns.

math.ST↗

arXiv2021

Deep Physics-aware Inference of Cloth Deformation for Monocular Human Performance Capture

Recent monocular human performance capture approaches have shown compelling dense tracking results of the full body from a single RGB camera. However, existing methods either do not estimate clothing at all or model cloth deformation with simple geometric priors instead of taking into account the underlying physical principles. This leads to noticeable artifacts in their reconstructions, e.g. baked-in wrinkles, implausible deformations that seemingly defy gravity, and intersections between cloth and body. To address these problems, we propose a person-specific, learning-based method that integrates a simulation layer into the training process to provide for the first time physics supervision in the context of weakly supervised deep monocular human performance capture. We show how integrating physics into the training process improves the learned cloth deformations, allows modeling clothing as a separate piece of geometry, and largely reduces cloth-body intersections. Relying only on weak 2D multi-view supervision during training, our approach leads to a significant improvement over current state-of-the-art methods and is thus a clear step towards realistic monocular capture of the entire deforming surface of a clothed human.

cs.CV↗

arXiv2021

Effect of Visual Cues on Pointing Tasks in Co-located Augmented Reality Collaboration

Visual cues are essential in computer-mediated communication. It is especially important when communication happens in a collaboration scenario that requires focusing several users' attention on aspecific object among other similar ones. This paper explores the effect of visual cues on pointing tasks in co-located Augmented Reality (AR) collaboration. A user study (N = 32, 16 pairs) was conducted to compare two types of visual cues: Pointing Line (PL)and Moving Track (MT). Both are head-based visual techniques.Through a series of collaborative pointing tasks on objects with different states (static and dynamic) and density levels (low, mediumand high), the results showed that PL was better on task performance and usability, but MT was rated higher on social presenceand user preference. Based on our results, some design implicationsare provided for pointing tasks in co-located AR collaboration.

cs.HC↗

arXiv2021

Transparent Checkpointing for OpenGL Applications on GPUs

This work presents transparent checkpointing of OpenGL applications, refining the split-process technique[1] for application in GPU-based 3D graphics. The split-process technique was earlier applied to checkpointing MPI and CUDA programs, enabling reinitialization of driver libraries. The presented design targets practical, checkpoint-package agnostic checkpointing of OpenGL applications. An early prototype is demonstrated on Autodesk Maya. Maya is a complex proprietary media-creation software suite used with large-scale rendering hardware for CGI (Computer-Generated Animation). Transparent checkpointing of Maya provides critically-needed fault tolerance, since Maya is prone to crash when artists use some of its bleeding-edge components. Artists then lose hours of work in re-creating their complex environment.

cs.DC↗

arXiv2021

Reflections on the spatial performance of atom probe tomography in the analysis of atomic neighbourhoods

Atom probe tomography is often introduced as providing "atomic-scale" mapping of the composition of materials and as such is often exploited to analyse atomic neighbourhoods within a material. Yet quantifying the actual spatial performance of the technique in a general case remains challenging, as they depend on the material system being investigated as well as on the specimen's geometry. Here, by using comparisons with field-ion microscopy experiments and field-ion imaging and field evaporation simulations, we provide the basis for a critical reflection on the spatial performance of atom probe tomography in the analysis of pure metals, low alloyed systems and concentrated solid solutions (i.e. akin to high-entropy alloys). The spatial resolution imposes strong limitations on the possible interpretation of measured atomic neighbourhoods, and directional neighbourhood analyses restricted to the depth are expected to be more robust. We hope this work gets the community to reflect on its practices, in the same way, it got us to reflect on our work.

cond-mat.mtrl-sci↗

arXiv2021

CLOAK: A Framework For Development of Confidential Blockchain Smart Contracts

In recent years, as blockchain adoption has been expanding across a wide range of domains, e.g., digital asset, supply chain finance, etc., the confidentiality of smart contracts is now a fundamental demand for practical applications. However, while new privacy protection techniques keep coming out, how existing ones can best fit development settings is little studied. Suffering from limited architectural support in terms of programming interfaces, state-of-the-art solutions can hardly reach general developers. In this paper, we proposed the CLOAK framework for developing confidential smart contracts. The key capability of CLOAK is allowing developers to implement and deploy practical solutions to multi-party transaction (MPT) problems, i.e., transact with secret inputs and states owned by different parties by simply specifying it. To this end, CLOAK introduced a domain-specific annotation language for declaring privacy specifications and further automatically generating confidential smart contracts to be deployed with trusted execution environment (TEE) on blockchain. In our evaluation on both simple and real-world applications, developers managed to deploy business services on blockchain in a concise manner by only developing CLOAK smart contracts whose size is less than 30% of the deployed ones.

cs.CR↗

arXiv2021

Supervised multi-specialist topic model with applications on large-scale electronic health record data

Motivation: Electronic health record (EHR) data provides a new venue to elucidate disease comorbidities and latent phenotypes for precision medicine. To fully exploit its potential, a realistic data generative process of the EHR data needs to be modelled. We present MixEHR-S to jointly infer specialist-disease topics from the EHR data. As the key contribution, we model the specialist assignments and ICD-coded diagnoses as the latent topics based on patient's underlying disease topic mixture in a novel unified supervised hierarchical Bayesian topic model. For efficient inference, we developed a closed-form collapsed variational inference algorithm to learn the model distributions of MixEHR-S. We applied MixEHR-S to two independent large-scale EHR databases in Quebec with three targeted applications: (1) Congenital Heart Disease (CHD) diagnostic prediction among 154,775 patients; (2) Chronic obstructive pulmonary disease (COPD) diagnostic prediction among 73,791 patients; (3) future insulin treatment prediction among 78,712 patients diagnosed with diabetes as a mean to assess the disease exacerbation. In all three applications, MixEHR-S conferred clinically meaningful latent topics among the most predictive latent topics and achieved superior target prediction accuracy compared to the existing methods, providing opportunities for prioritizing high-risk patients for healthcare services. MixEHR-S source code and scripts of the experiments are freely available at https://github.com/li-lab-mcgill/mixehrS

cs.LG↗

arXiv2021

Extraction of inherent polarization modes from a single light beam

Superposition of two independent orthogonally polarized beams is a conventional principle of creating a new light beam. Here, we intend to achieve the inverse process, namely, extracting inherent polarization modes from a single light beam. However, inherent polarization modes within a light beam are always entangled so that a stable polarization is maintained during propagation in free space. To overcome this limitation, we report an approach that breaks the modulation symmetry of a light beam, thereby disentangling the inherent polarization modes. Using polarization mode competition along with an optical pen, polarization modes are extracted at will in the focal region of an objective lens. This work demonstrates polarization mode extraction from a light beam, which will not only provide an entirely new principle of polarization modulation but also pave the way for multidimensional manipulation of light fields, thereby facilitating extensive developments in optics.

physics.optics↗

arXiv2021

Lagrangian-Eulerian Multi-Density Topology Optimization with the Material Point Method

In this paper, a hybrid Lagrangian-Eulerian topology optimization (LETO) method is proposed to solve the elastic force equilibrium with the Material Point Method (MPM). LETO transfers density information from freely movable Lagrangian carrier particles to a fixed set of Eulerian quadrature points. This transfer is based on a smooth radial kernel involved in the compliance objective to avoid the artificial checkerboard pattern. The quadrature points act as MPM particles embedded in a lower-resolution grid and enable a sub-cell multi-density resolution of intricate structures with a reduced computational cost. A quadrature-level connectivity graph-based method is adopted to avoid the artificial checkerboard issues commonly existing in multi-resolution topology optimization methods. Numerical experiments are provided to demonstrate the efficacy of the proposed approach.

physics.comp-ph↗

arXiv2021

A survey of deep neural network watermarking techniques

Protecting the Intellectual Property Rights (IPR) associated to Deep Neural Networks (DNNs) is a pressing need pushed by the high costs required to train such networks and the importance that DNNs are gaining in our society. Following its use for Multimedia (MM) IPR protection, digital watermarking has recently been considered as a mean to protect the IPR of DNNs. While DNN watermarking inherits some basic concepts and methods from MM watermarking, there are significant differences between the two application areas, calling for the adaptation of media watermarking techniques to the DNN scenario and the development of completely new methods. In this paper, we overview the most recent advances in DNN watermarking, by paying attention to cast it into the bulk of watermarking theory developed during the last two decades, while at the same time highlighting the new challenges and opportunities characterizing DNN watermarking. Rather than trying to present a comprehensive description of all the methods proposed so far, we introduce a new taxonomy of DNN watermarking and present a few exemplary methods belonging to each class. We hope that this paper will inspire new research in this exciting area and will help researchers to focus on the most innovative and challenging problems in the field.

cs.CR↗

arXiv2021

Convolutional neural network-assisted recognition of nanoscale L12 ordered structures in face-centred cubic alloys

Nanoscale L12-type ordered structures are widely used in face-centred cubic (FCC) alloys to exploit their hardening capacity and thereby improve mechanical properties. These fine-scale particles are typically fully coherent with matrix with the same atomic configuration disregarding chemical species, which makes them challenging to be characterized. Spatial distribution maps (SDMs) are used to probe local order by interrogating the three-dimensional (3D) distribution of atoms within reconstructed atom probe tomography (APT) data. However, it is almost impossible to manually analyse the complete point cloud ($>10$ million) in search for the partial crystallographic information retained within the data. Here, we proposed an intelligent L12-ordered structure recognition method based on convolutional neural networks (CNNs). The SDMs of a simulated L12-ordered structure and the FCC matrix were firstly generated. These simulated images combined with a small amount of experimental data were used to train a CNN-based L12-ordered structure recognition model. Finally, the approach was successfully applied to reveal the 3D distribution of L12-type $δ^\prime$-Al3(LiMg) nanoparticles with an average radius of 2.54 nm in a FCC Al-Li-Mg system. The minimum radius of detectable nanodomain is even down to 5 Å. The proposed CNN-APT method is promising to be extended to recognize other nanoscale ordered structures and even more-challenging short-range ordered phenomena in the near future.

cond-mat.mtrl-sci↗

arXiv2021

IRO: Integrity and Reliability Enhanced Ring ORAM

Memory security and reliability are two of the major design concerns in cloud computing systems. State-of-the-art memory security-reliability co-designs (e.g. Synergy) have achieved a good balance on performance, confidentiality, integrity, and reliability. However, these works merely rely on encryption to ensure data confidentiality, which has been proven unable to prevent information leakage from memory access patterns. Ring ORAM is an attractive confidential protection protocol to hide memory access patterns to the untrusted storage system. Unfortunately, it does not compatible with the security-reliability co-designs. A forced combination would result in more severe performance loss. In this paper, we propose IRO, an Integrity and Reliability enhanced Ring ORAM design. To reduce the overhead of integrity verification, we propose a low overhead integrity tree RIT and use a Minimum Update Subtree Tree (MUST) to reduce metadata update overhead. To improve memory reliability, we present Secure Replication to provide channel-level error resilience for the ORAM tree and use the mirrored channel technique to guarantee the reliability of the MUST. Last, we use the error correction pointer (ECP) to repair permanent memory cell fault to further improve device reliability and lifetime. A compact metadata design is used to reduce the storage and consulting overhead of the ECP. IRO provides strong security and reliability guarantees, while the resulting storage and performance overhead is very small. Our evaluation shows that IRO only increases 7.54% execution time on average over the Baseline under two channels four AES-GCM units setting. With enough AES-GCM units to perform concurrent MAC computing, IRO can reduce 2.14% execution time of the Baseline.

cs.CR↗