arXiv subjects

Yue Chen

Publications and source records attributed to Yue Chen.

At least 145 records · Page 8Linked to original sources

arXiv2024

STAR-RIS in Cognitive Radio Networks

The development of sixth-generation (6G) communication technologies is confronted with the significant challenge of spectrum resource shortage. To alleviate this issue, we propose a novel simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) aided multiple-input multiple-output (MIMO) cognitive radio (CR) system. Specifically, the underlying secondary network in the proposed CR system reuses the same frequency resources occupied by the primary network with the help of the STAR-RIS. The secondary network sum rate maximization problem is first formulated for the STAR-RIS aided MIMO CR system. The adoption of STAR-RIS necessitates an intricate beamforming design for the considered system due to its large number of coupled coefficients. The block coordinate descent method is employed to address the formulated optimization problem. In each iteration, the beamformers at the secondary base station (SBS) are optimized by solving a quadratically constrained quadratic program (QCQP) problem. Concurrently, the STAR-RIS passive beamforming problem is resolved using tailored algorithms designed for the two phase-shift models: 1) For the independent phase-shift model, a successive convex approximation-based algorithm is proposed. 2) For the coupled phase-shift model, a penalty dual decomposition-based algorithm is conceived, in which the phase shifts and amplitudes of the STAR-RIS elements are optimized using closed-form solutions. Simulation results show that: 1) The proposed STAR-RIS aided CR communication framework can significantly enhance the sum rate of the secondary system. 2) The coupled phase-shift model results in limited performance degradation compared to the independent phase-shift model.

eess.SP↗

arXiv2024

Real-time Hosting Capacity Assessment for Electric Vehicles: A Sequential Forecast-then-Optimize Method

Hosting capacity (HC) assessment for electric vehicles (EVs) is crucial for EV secure integration and reliable power system operation. Existing methods primarily focus on a long-term perspective (e.g., system planning), and consider the EV charging demands as scalar values, which introduces inaccuracies in real-time operations due to the inherently stochastic nature of EVs. In this regard, this paper proposes a real-time HC assessment method for EVs through a three-step process, involving real-time probabilistic forecasting, risk analysis and probabilistic optimization. Specifically, we conduct real-time probabilistic forecasting to capture the stochastic nature of EV charging demands across multiple charging stations by performing deterministic forecasting and fitting the distribution of forecasting errors. The deterministic forecasting is conducted using an adaptive spatio-temporal graph convolutional network (ASTGCN). ASTGCN leverages adaptive spatial feature extraction, attention-based temporal feature extraction, and second-order graph representation to improve the forecasting performance. Subsequently, based on the probabilistic forecasting of EV charging demands, we conduct real-time risk analysis and operational boundary identification by utilizing probabilistic power flow calculations to assess potential violations of secure operation constraints. Furthermore, we present the formulation of real-time HC of EVs considering expected satisfaction of stochastic EV charging demands, and propose an optimization model for real-time HC assessment of EVs. Numerical experiments on a real-world dataset demonstrate that the proposed ASTGCN model outperforms state-of-the-art forecasting models by achieving the lowest root mean square error of 0.0442, and the real-time HC is improved by 64% compared to long-term HC assessment.

math.OC↗

arXiv2024

Self-testing quantum randomness expansion on an integrated photonic chip

The power of quantum random number generation is more than just the ability to create truly random numbers$\unicode{x2013}$it can also enable self-testing, which allows the user to verify the implementation integrity of certain critical quantum components with minimal assumptions. In this work, we develop and implement a self-testing quantum random number generator (QRNG) chipset capable of generating 15.33 Mbits of certifiable randomness in each run (an expansion rate of $5.11\times 10^{-4}$ at a repetition rate of 10 Mhz). The chip design is based on a highly loss-and-noise tolerant measurement-device-independent protocol, where random coherent states encoded using quadrature phase shift keying are used to self-test the quantum homodyne detection unit: well-known to be challenging to characterise in practice. Importantly, this proposal opens up the possibility to implement miniaturised self-testing QRNG devices at production scale using standard silicon photonics foundry platforms.

quant-ph↗

arXiv2024

ElectionSim: Massive Population Election Simulation Powered by Large Language Model Driven Agents

The massive population election simulation aims to model the preferences of specific groups in particular election scenarios. It has garnered significant attention for its potential to forecast real-world social trends. Traditional agent-based modeling (ABM) methods are constrained by their ability to incorporate complex individual background information and provide interactive prediction results. In this paper, we introduce ElectionSim, an innovative election simulation framework based on large language models, designed to support accurate voter simulations and customized distributions, together with an interactive platform to dialogue with simulated voters. We present a million-level voter pool sampled from social media platforms to support accurate individual simulation. We also introduce PPE, a poll-based presidential election benchmark to assess the performance of our framework under the U.S. presidential election scenario. Through extensive experiments and analyses, we demonstrate the effectiveness and robustness of our framework in U.S. presidential election simulations.

cs.CL↗

arXiv2024

Revisit Many-body Interaction Heat Current and Thermal Conductivity Calculation in Moment Tensor Potential/LAMMPS Interface

The definition of heat current operator for systems for non-pairwise additive interactions and its impact on related lattice thermal conductivity ($κ_{L}$) via molecular dynamics simulation (MD) are ambiguous and controversial when migrating from conventional empirical potential models to machine learning potential (MLP) models. Empirical model descriptions are often limited to three- to four-body interaction while a sophisticated representation of the many-body physics could be resembled in MLPs. Herein, we study and compare the significance of many-body interaction to the heat current computation in one of the most popular MLP models, the Moment Tensor Potential (MTP). Non-equilibrium MD simulations and equilibrium MD simulations among four different materials, $PbTe$, amorphous $Sc_{0.2}Sb_{2}Te_{3}$, graphene, and $BAs$, were performed. We found inconsistency between the simulation thermostat and its implemented heat current operator in our non-equilibrium MD results which violate law of energy conservation and suggest a need for revision. We revisit the virial stress tensor expression within the calculator and identified the lack of a generalised many-body heat current description in it. We uncover the influence of the modified heat current formula that could alter the $κ_{L}$ results 29% to 64% using the equilibrium MD computational approach. Our work demonstrates the importance of a many-body description during thermal analysis in MD simulations when MLPs are in concern. This work sheds light on a better understanding of the relationship between interatomic interaction and its heat transport mechanism.

cond-mat.mtrl-sci↗

arXiv2024

Survey on Large Language Model-Enhanced Reinforcement Learning: Concept, Taxonomy, and Methods

With extensive pre-trained knowledge and high-level general capabilities, large language models (LLMs) emerge as a promising avenue to augment reinforcement learning (RL) in aspects such as multi-task learning, sample efficiency, and high-level task planning. In this survey, we provide a comprehensive review of the existing literature in LLM-enhanced RL and summarize its characteristics compared to conventional RL methods, aiming to clarify the research scope and directions for future studies. Utilizing the classical agent-environment interaction paradigm, we propose a structured taxonomy to systematically categorize LLMs' functionalities in RL, including four roles: information processor, reward designer, decision-maker, and generator. For each role, we summarize the methodologies, analyze the specific RL challenges that are mitigated, and provide insights into future directions. Lastly, a comparative analysis of each role, potential applications, prospective opportunities, and challenges of the LLM-enhanced RL are discussed. By proposing this taxonomy, we aim to provide a framework for researchers to effectively leverage LLMs in the RL field, potentially accelerating RL applications in complex applications such as robotics, autonomous driving, and energy systems.

cs.LG↗

arXiv2024

Exact Potts/Tutte Polynomials for Hammock Chain Graphs

We present exact calculations of the $q$-state Potts model partition functions and the equivalent Tutte polynomials for chain graphs comprised of $m$ repeated hammock subgraphs $H_{e_1,...,e_r}$ connected with line graphs of length $e_g$ edges, such that the chains have open or cyclic boundary conditions (BC). Here, $H_{e_1,...,e_r}$ is a hammock (series-parallel) subgraph with $r$ separate paths along ``ropes'' with respective lengths $e_1, ..., e_r$ edges, connecting the two end vertices. We denote the resultant chain graph as $G_{\{e_1,...,e_r\},e_g,m;BC}$. We discuss special cases, including chromatic, flow, and reliability polynomials. In the case of cyclic boundary conditions, the zeros of the Potts partition function in the complex $q$ function accumulate, in the limit $m \to \infty$, onto curves forming a locus ${\cal B}$, and we study this locus.

cond-mat.stat-mech↗

arXiv2024

A new multiple-arc model of the resonant Kuiper belt objects -- Plutinos

To incorporate the gravitational influence of Kuiper belt objects (KBOs) in planetary ephemerides, uniform-ring models are commonly employed. In this paper, for representing the KBO population residing in Neptune's 2:3 mean motion resonance (MMR), known as the Plutinos, we introduce a three-arc model by considering their resonant characteristics. Each `arc' refers to a segment of the uniform ring and comprises an appropriate number of point masses. Then the total perturbation of Plutinos is numerically measured by the change in the Sun-Neptune distance ($Δd_{SN}$). We conduct a comprehensive investigation to take into account various azimuthal and radial distributions associated with the resonant amplitudes ($A$) and eccentricities ($e$) of Plutinos, respectively. The results show that over a 100-year period: (1) at the smallest $e=0.05$, the Sun-Neptune distance change $Δd_{SN}$ caused by Plutinos decreases significantly as $A$ reduces. It can deviate from the value of $Δd_{SN}$ obtained in the ring model by approximately 100 km; (2) as $e$ increases in the medium range of 0.1-0.2, the difference in $Δd_{SN}$ between the arc and ring models becomes increasingly significant; (3) at the largest $e\gtrsim0.25$, $Δd_{SN}$ can approach zero regardless of $A$, and the arc and ring models exhibit a substantial difference in $Δd_{SN}$, reaching up to 170 km. Then the applicability of our three-arc model is further verified by comparing it to the perturbations induced by observed Plutinos on the positions of both Neptune and Saturn. Moreover, the concept of the multiple-arc model, designed for Plutinos, can be easily extended to other MMRs densely populated by small bodies.

astro-ph.EP↗

arXiv2024

A Differentially Private Energy Trading Mechanism Approaching Social Optimum

This paper proposes a differentially private energy trading mechanism for prosumers in peer-to-peer (P2P) markets, offering provable privacy guarantees while approaching the Nash equilibrium with nearly socially optimal efficiency. We first model the P2P energy trading as a (generalized) Nash game and prove the vulnerability of traditional distributed algorithms to privacy attacks through an adversarial inference model. To address this challenge, we develop a privacy-preserving Nash equilibrium seeking algorithm incorporating carefully calibrated Laplacian noise. We prove that the proposed algorithm achieves $ε$-differential privacy while converging in expectation to the Nash equilibrium with a suitable stepsize. Numerical experiments are conducted to evaluate the algorithm's robustness against privacy attacks, convergence behavior, and optimality compared to the non-private solution. Results demonstrate that our mechanism effectively protects prosumers' sensitive information while maintaining near-optimal market outcomes, offering a practical approach for privacy-preserving coordination in P2P markets.

cs.GT↗

arXiv2024

Development of a New Type of Vortex Bladeless Wind Turbine for Urban Energy Systems

Innovation and development of renewable energy devices are crucial for reaching a sustainable and environmentally conscious future. This work focuses on the development of a new type of renewable energy devices in the context of Smart Garden at the Chinese University of Hong Kong, which aims to design a bladeless wind turbine for urban areas, addressing the pressing need for clean energy locally and globally. Traditional wind turbines have been widely adopted in recent decades, while bladeless wind turbines have also displayed their advantages and uniqueness in urban areas. A Vortex Bladeless Wind Turbine (VBWT) is modeled by using Fusion 360 to optimize wind energy generation in urban settings with limited space and buildings-dominated landscape. Optimal parameters of the VBWT were obtained by comparing the results of drag force, lift force and deflection, via the simulations in Ansys. Hardware of proposed bladeless wind turbine has been assembled and developed by 3-dimensional printing. Additional tests and adjustments on hardware further improve the performance of the developed wind turbine. The outcomes of this work have the potential to contribute to future renewable energy initiatives and devote the sustainability efforts in urban energy systems.

cs.CE↗

arXiv2024

Results of the Big ANN: NeurIPS'23 competition

The 2023 Big ANN Challenge, held at NeurIPS 2023, focused on advancing the state-of-the-art in indexing data structures and search algorithms for practical variants of Approximate Nearest Neighbor (ANN) search that reflect the growing complexity and diversity of workloads. Unlike prior challenges that emphasized scaling up classical ANN search ~\cite{DBLP:conf/nips/SimhadriWADBBCH21}, this competition addressed filtered search, out-of-distribution data, sparse and streaming variants of ANNS. Participants developed and submitted innovative solutions that were evaluated on new standard datasets with constrained computational resources. The results showcased significant improvements in search accuracy and efficiency over industry-standard baselines, with notable contributions from both academic and industrial teams. This paper summarizes the competition tracks, datasets, evaluation metrics, and the innovative approaches of the top-performing submissions, providing insights into the current advancements and future directions in the field of approximate nearest neighbor search.

cs.IR↗

arXiv2024

EqvAfford: SE(3) Equivariance for Point-Level Affordance Learning

Humans perceive and interact with the world with the awareness of equivariance, facilitating us in manipulating different objects in diverse poses. For robotic manipulation, such equivariance also exists in many scenarios. For example, no matter what the pose of a drawer is (translation, rotation and tilt), the manipulation strategy is consistent (grasp the handle and pull in a line). While traditional models usually do not have the awareness of equivariance for robotic manipulation, which might result in more data for training and poor performance in novel object poses, we propose our EqvAfford framework, with novel designs to guarantee the equivariance in point-level affordance learning for downstream robotic manipulation, with great performance and generalization ability on representative tasks on objects in diverse poses.

cs.RO↗

arXiv2024

RLGNet: Repeating-Local-Global History Network for Temporal Knowledge Graph Reasoning

Temporal Knowledge Graph (TKG) reasoning involves predicting future events based on historical information. However, due to the unpredictability of future events, this task is highly challenging. To address this issue, we propose a multi-scale hybrid architecture model based on ensemble learning, called RLGNet (Repeating-Local-Global History Network). Inspired by the application of multi-scale information in other fields, we introduce the concept of multi-scale information into TKG reasoning. Specifically, RLGNet captures and integrates different levels of historical information by combining modules that process information at various scales. The model comprises three modules: the Repeating History Module focuses on identifying repetitive patterns and trends in historical data, the Local History Module captures short-term changes and details, and the Global History Module provides a macro perspective on long-term changes. Additionally, to address the limitations of previous single-architecture models in generalizing across single-step and multi-step reasoning tasks, we adopted architectures based on Recurrent Neural Networks (RNN) and Multi-Layer Perceptrons (MLP) for the Local and Global History Modules, respectively. This hybrid architecture design enables the model to complement both multi-step and single-step reasoning capabilities. Finally, to address the issue of noise in TKGs, we adopt an ensemble learning strategy, combining the predictions of the three modules to reduce the impact of noise on the final prediction results. In the evaluation on six benchmark datasets, our approach generally outperforms existing TKG reasoning models in multi-step and single-step reasoning tasks.

cs.AI↗

arXiv2024

Phonon Heat Transport and Anisotropic Tuning of Quantum Fluctuations in a Frustrated Honeycomb Magnet

Honeycomb cobalt oxides containing 3$\it{d}$ Co$^{2+}$ ions might realize frustrated magnetism and novel quantum phases. Among candidate materials, Na$_{3}$Co$_{2}$SbO$_{6}$ stands out for its distorted honeycomb lattice and significant in-plane anisotropy, motivating vector-field tuning inside the honeycomb plane. Here we use thermal transport down to the mK regime to study twin-free crystals of Na$_{3}$Co$_{2}$SbO$_{6}$ subject to in-plane vector fields. We find that the thermal conductivity $κ$ never exceeds the heat-transport capability of phonons, rendering its suppression primarily due to phonon scattering off magnetic excitations and/or domain boundaries. The system's field-driven quantum criticality manifests itself as an abundance of magnetic fluctuations hindering the heat transport, which further depends on the field direction in an intriguing manner.

cond-mat.str-el↗

arXiv2024

A Two-Stage Online Algorithm for EV Charging Station Energy Management and Carbon Trading

The increasing electric vehicle (EV) adoption challenges the energy management of charging stations (CSs) due to the large number of EVs and the underlying uncertainties. Moreover, the carbon footprint of CSs is growing significantly due to the rising charging power demand. This makes it important for CSs to properly manage their energy usage and ensure their carbon footprint stay within their carbon emission quotas. This paper proposes a two-stage online algorithm for this purpose, considering the different time scales of energy management and carbon trading. In the first stage, the CS characterizes the real-time aggregate EV power flexibility, in terms of upper and lower bounds on the total charging power, by a Lyapunov optimization-based online algorithm. In the second stage, the CS co-optimizes energy management and carbon trading, with EV charging power chosen within the aggregate flexibility region provided by the first stage. A generalized battery model is proposed to capture the dynamic carbon footprint changes and carbon trading. A virtual carbon queue is designed to develop an online algorithm for the second stage, which can ensure the carbon footprint of CS be within its carbon emission quota and its total operation cost is nearly offline optimal. Case studies validate the effectiveness and advantages of the proposed algorithm.

math.OC↗

arXiv2024

General-purpose machine-learned potential for 16 elemental metals and their alloys

Machine-learned potentials (MLPs) have exhibited remarkable accuracy, yet the lack of general-purpose MLPs for a broad spectrum of elements and their alloys limits their applicability. Here, we present a feasible approach for constructing a unified general-purpose MLP for numerous elements, demonstrated through a model (UNEP-v1) for 16 elemental metals and their alloys. To achieve a complete representation of the chemical space, we show, via principal component analysis and diverse test datasets, that employing one-component and two-component systems suffices. Our unified UNEP-v1 model exhibits superior performance across various physical properties compared to a widely used embedded-atom method potential, while maintaining remarkable efficiency. We demonstrate our approach's effectiveness through reproducing experimentally observed chemical order and stable phases, and large-scale simulations of plasticity and primary radiation damage in MoTaVW alloys. This work represents a significant leap towards a unified general-purpose MLP encompassing the periodic table, with profound implications for materials science.

cond-mat.mtrl-sci↗

arXiv2024

Empowering Embodied Manipulation: A Bimanual-Mobile Robot Manipulation Dataset for Household Tasks

The advancements in embodied AI are increasingly enabling robots to tackle complex real-world tasks, such as household manipulation. However, the deployment of robots in these environments remains constrained by the lack of comprehensive bimanual-mobile robot manipulation data that can be learned. Existing datasets predominantly focus on single-arm manipulation tasks, while the few dual-arm datasets available often lack mobility features, task diversity, comprehensive sensor data, and robust evaluation metrics; they fail to capture the intricate and dynamic nature of household manipulation tasks that bimanual-mobile robots are expected to perform. To overcome these limitations, we propose BRMData, a Bimanual-mobile Robot Manipulation Dataset specifically designed for household applications. BRMData encompasses 10 diverse household tasks, including single-arm and dual-arm tasks, as well as both tabletop and mobile manipulations, utilizing multi-view and depth-sensing data information. Moreover, BRMData features tasks of increasing difficulty, ranging from single-object to multi-object grasping, non-interactive to human-robot interactive scenarios, and rigid-object to flexible-object manipulation, closely simulating real-world household applications. Additionally, we introduce a novel Manipulation Efficiency Score (MES) metric to evaluate both the precision and efficiency of robot manipulation methods in household tasks. We thoroughly evaluate and analyze the performance of advanced robot manipulation learning methods using our BRMData, aiming to drive the development of bimanual-mobile robot manipulation technologies. The dataset is now open-sourced and available at https://embodiedrobot.github.io/.

cs.RO↗

arXiv2024

Antisymmetric Planar Hall Effect in Rutile Oxide Films Induced by the Lorentz Force

The conventional Hall effect is linearly proportional to the field component or magnetization component perpendicular to a film. Despite the increasing theoretical proposals on the Hall effect to the in-plane field or magnetization in various special systems induced by the Berry curvature, such an unconventional Hall effect has only been experimentally reported in Weyl semimetals and in a heterodimensional superlattice. Here, we report an unambiguous experimental observation of the antisymmetric planar Hall effect (APHE) with respect to the in-plane magnetic field in centrosymmetric rutile RuO2 and IrO2 single-crystal films. The measured Hall resistivity is found to be linearly proportional to the component of the applied in-plane magnetic field along a particular crystal axis and to be independent of the current direction or temperature. Both the experimental observations and theoretical calculations confirm that the APHE in rutile oxide films is induced by the Lorentz force. Our findings can be generalized to ferromagnetic materials for the discovery of anomalous Hall effects and quantum anomalous Hall effects induced by in-plane magnetization. In addition to significantly expanding knowledge of the Hall effect, this work opens the door to explore new members in the Hall effect family.

cond-mat.mes-hall↗