arXiv subjects

Yuchen Cui

Publications and source records attributed to Yuchen Cui.

At least 19 recordsLinked to original sources

arXiv2026

Meta-Ctrl: Guaranteed Plan Generation by Decoupling Syntactic and Semantic Constraints

LLMs generate fluent plans for robots but routinely violate the syntactic and se8mantic constraints they must satisfy to execute, and existing remedies trade formal guarantees against plan quality: soft methods (affordance scoring, grounded decoding) give no guarantee, while symbolic planners (LLM+P) discard the LM's commonsense. We propose \textbf{Meta-Ctrl}, a constrained-decoding framework that guarantees the encoded constraints while preserving the base LM's plan quality. Meta-Ctrl introduces \emph{meta-tokens}---a compact vocabulary of grounded actions---enforcing syntax at the token level and semantics (preconditions, goals, ordering) at the action level, an exact factorization that cuts the memory of constrained decoding from over 107TB to under 2GB. With it, a small open-weight LM becomes competitive where it otherwise sits at the bottom of the leaderboard: on WAH-NL under the LoTa-Bench protocol it reaches the highest reported subgoal success rate, exceeding GPT-4's, with consistent gains across the Embodied Agent Interface. We further demonstrate it on a real tabletop robot, where every generated plan satisfies its preconditions and goals by construction. Project website: https://metactrlg.github.io

cs.RO↗

arXiv2026

FetchMan: Learning Visual Humanoid Loco-Manipulation Policies from Simulated Experiences

Visual loco-manipulation policies that can generalize to novel scenes and objects have long been a goal of robotics research. However, today's data-hungry algorithms make collecting sufficient demonstrations a struggle for tabletop manipulation, and even more so for humanoids that must also walk and balance. Learning from simulated data and transferring that behavior to the real world, as is commonly done in locomotion, sidesteps this struggle, so we replicate that recipe for loco-manipulation. In doing so, we find that cloning synthetic demonstrations results in a low performance ceiling no matter the amount of training data. Reinforcement learning breaks through it, and refining the cloned policy with Flow-GRPO on a single sparse reward yields performance that synthetic behavior cloning cannot match. Together, these stages form our end-to-end sim-to-real pipeline spanning more than 150,000 scenes, which we use to train FetchMan. We evaluate it on FetchMan-Bench, a simulation benchmark we release, and deploy it zero-shot on a real Unitree G1, where our single-object reach-and-pick policy walks to and grasps a target across unseen scenes at 73.3% success. Finally, we extend this recipe to multi-object training, a first step toward loco-manipulation generalist policies at this data scale.

cs.RO↗

arXiv2026

DexDirect: Direct Kinesthetic Arm Guidance for Efficient Dexterous Demonstration Collection

Scalable collection of dexterous manipulation demonstrations remains a major bottleneck for robot learning. High-fidelity interfaces often require costly hardware and extensive setup, while low-setup, low cost alternatives tend to provide less precise control and impose greater cognitive workload on operators. We present DexDirect, a direct kinesthetic arm guidance for efficient dexterous demonstration collection. The operator drags a 6-DoF gravity-compensated robot arm directly by a handle, while a single webcam retargets operator's other hand onto a 16 joints 13-DoF dexterous robot hand. User studies suggest DexDirect collects 17.2x and 3.2x more successful demonstrations compared to purely vision (AnyTeleop) and pose-tracking (TeleDex) baselines. An adapted NASA-TLX shows DexDirect greatly reduces mental demand, effort, and frustration, despite raising physical demand. A diffusion policy trained on DexDirect demonstrations reaches a 90% success rate on a cube pick-and-place task. These results suggest that direct kinesthetic arm guidance combined with vision-based hand retargeting provides an efficient low-setup and scalable interface for collecting dexterous manipulation demonstrations

cs.RO↗

arXiv2026

Coherent seeding and control of dynamical ferroelectricity by phonon anharmonicity

Optical control of quantum materials has progressed along two separate directions: creating non-equilibrium states inaccessible at equilibrium, and coherently controlling ultrafast dynamics with multi-pulse protocols. Ferroelectricity is especially attractive in this context because its order parameter, macroscopic polarization, directly links inversion-symmetry breaking to functional response. Yet light-induced ferroelectricity has so far been confined to quantum paraelectrics near the ferroelectric instability, where critical fluctuations obscure the formation of a homogeneous ferroelectric state and complicate its deterministic coherent control. Unifying these capabilities -- preparing a symmetry-broken state and then coherently steering its functionality -- remains a central challenge. Here we show that intense terahertz excitation of a soft phonon mode induces a ferroelectric state in centrosymmetric PbTe, a thermoelectric material with strong lattice anharmonicity but no ferroelectric transition at finite temperature. The light-induced symmetry-broken state can be realized up to about 100 K, without relying on local dipolar fluctuations. Experiment and theory together reveal that terahertz-driven anharmonic coupling between degenerate transverse optical phonons underlies this ferroelectric induction. Furthermore, we demonstrate coherent amplification and suppression of the induced polarization via a double-pulse-excitation protocol. These results establish terahertz-driven anharmonic mode coupling as a general strategy for controlling mode-mediated functionalities in quantum materials, opening a route to ultrafast information processing.

cond-mat.mtrl-sci↗

arXiv2026

Proximal State Nudging: Reducing Skill Atrophy from AI Assistance

Skill atrophy, the gradual decline of human capability under AI assistance, poses a safety risk in shared-control of semi-autonomous systems, where operators may be unable to distinguish their own inputs from autonomous corrections. We propose Proximal State Nudging (PSN), a shared autonomy algorithm that jointly optimizes for skill development and task performance by nudging users toward states estimated to be most learnable. We first show that PSN outperforms existing shared autonomy baselines in balancing student improvement in unassisted reward with overall shared performance, using simulated students in the classic LunarLander environment. We then present, to the best of our knowledge, the first human subject studies of a planner incorporating learning-compatible shared autonomy: across two driving tasks in the CARLA simulator (High Performance Racing and Parallel Parking, n = 60), PSN produces up to 7x larger gains in unassisted skill than standard blended shared autonomy, while incurring 50% fewer collisions than unassisted self-practice.

cs.RO↗

arXiv2026

Learning from the Best: Smoothness-Driven Metrics for Data Quality in Imitation Learning

In behavioral cloning (BC), policy performance is fundamentally limited by demonstration data quality. Real-world datasets contain trajectories of varying quality due to operator skill differences, teleoperation artifacts, and procedural inconsistencies, yet standard BC treats all demonstrations equally. Existing curation methods require costly policy training in the loop or manual annotation, limiting scalability. We propose RINSE (Ranking and INdexing Smooth Examples), a lightweight framework for scoring demonstrations based on trajectory smoothness that is policy-architecture-agnostic and operates on trajectory data alone, with TED additionally using a phase-boundary/contact signal. Grounded in motor control theory, which establishes smoothness as a hallmark of skilled movement, RINSE uses two complementary metrics: Spectral Arc Length (SAL), a spectral measure of frequency-domain regularity, and Trajectory-Envelope Distance (TED), a spatial measure of contact-aware geometric deviation. We show that smoothness filtering can reduce the conditional action variance of the retained data distribution, with downstream effects that can be amplified by action chunking and compounding error. On RoboMimic benchmarks, SAL filtering achieves 16% higher success using one-sixth of the data. On real-world manipulation, TED filtering achieves 20% improvement with half the data. As a retrieval-stage filter within STRAP on LIBERO-10, RINSE re-ranking improves mean success by 5.6%. As soft weights in Re-Mix domain reweighting, RINSE scores produce domain allocations highly correlated with the learned Re-Mix allocations (Spearman $\rho \geq 0.89$). These results support smoothness as a useful quality signal across filtering, retrieval, and reweighting settings, especially in noisy or heterogeneous data regimes.

cs.RO↗

arXiv2026

DiSCo: Diffusion Sequence Copilots for Shared Autonomy

Shared autonomy combines human user and AI copilot actions to control complex systems such as robotic arms. When a task is challenging, requires high dimensional control, or is subject to corruption, shared autonomy can significantly increase task performance by using a trained copilot to effectively correct user actions in a manner consistent with the user's goals. To significantly improve the performance of shared autonomy, we introduce Diffusion Sequence Copilots (DiSCo): a method of shared autonomy with diffusion policy that plans action sequences consistent with past user actions. DiSCo seeds and inpaints the diffusion process with user-provided actions with hyperparameters to balance conformity to expert actions, alignment with user intent, and perceived responsiveness. We demonstrate that DiSCo substantially improves task performance in simulated driving and robotic arm tasks. Project website: https://sites.google.com/view/disco-shared-autonomy/

cs.HC↗

arXiv2026

DexEXO: A Wearability-First Dexterous Exoskeleton for Operator-Agnostic Demonstration and Learning

Scaling dexterous robot learning is constrained by the difficulty of collecting high-quality demonstrations across diverse operators. Existing wearable interfaces often trade comfort and cross-user adaptability for kinematic fidelity, while embodiment mismatch between demonstration and deployment requires visual post-processing before policy training. We present DexEXO, a wearability-first hand exoskeleton that aligns visual appearance, contact geometry, and kinematics at the hardware level. DexEXO features a pose-tolerant thumb mechanism and a slider-based finger interface analytically modeled to support hand lengths from 140~mm to 217~mm, reducing operator-specific fitting and enabling scalable cross-operator data collection. A passive hand visually matches the deployed robot, allowing direct policy training from raw wrist-mounted RGB observations. User studies demonstrate improved comfort and usability compared to prior wearable systems. Using visually aligned observations alone, we train diffusion policies that achieve competitive performance while substantially simplifying the end-to-end pipeline. These results show that prioritizing wearability and hardware-level embodiment alignment reduces both human and algorithmic bottlenecks without sacrificing task performance. Project Page: https://dexexo-research.github.io/

cs.RO↗

arXiv2026

TeleDex: Accessible Dexterous Teleoperation

Despite increasing dataset scale and model capacity, robot manipulation policies still struggle to generalize beyond their training distributions. As a result, deploying state-of-the-art policies in new environments, tasks, or robot embodiments often requires collecting additional demonstrations. Enabling this in real-world deployment settings requires tools that allow users to collect demonstrations quickly, affordably, and with minimal setup. We present TeleDex, an open-source system for intuitive teleoperation of dexterous hands and robotic manipulators using any readily available phone. The system streams low-latency 6-DoF wrist poses and articulated 21-DoF hand state estimates from the phone, which are retargeted to robot arms and multi-fingered hands without requiring external tracking infrastructure. TeleDex supports both a handheld phone-only mode and an optional 3D-printable hand-mounted interface for finger-level teleoperation. By lowering the hardware and setup barriers to dexterous teleoperation, TeleDex enables users to quickly collect demonstrations during deployment to support policy fine-tuning. We evaluate the system across simulation and real-world manipulation tasks, demonstrating its effectiveness as a unified scalable interface for robot teleoperation. All software and hardware designs, along with demonstration videos, are open-source and available at orayyan.com/teledex.

cs.RO↗

arXiv2026

WHED: A Wearable Hand Exoskeleton for Natural, High-Quality Demonstration Collection

Scalable learning of dexterous manipulation remains bottlenecked by the difficulty of collecting natural, high-fidelity human demonstrations of multi-finger hands due to occlusion, complex hand kinematics, and contact-rich interactions. We present WHED, a wearable hand-exoskeleton system designed for in-the-wild demonstration capture, guided by two principles: wearability-first operation for extended use and a pose-tolerant, free-to-move thumb coupling that preserves natural thumb behaviors while maintaining a consistent mapping to the target robot thumb degrees of freedom. WHED integrates a linkage-driven finger interface with passive fit accommodation, a modified passive hand with robust proprioceptive sensing, and an onboard sensing/power module. We also provide an end-to-end data pipeline that synchronizes joint encoders, AR-based end-effector pose, and wrist-mounted visual observations, and supports post-processing for time alignment and replay. We demonstrate feasibility on representative grasping and manipulation sequences spanning precision pinch and full-hand enclosure grasps, and show qualitative consistency between collected demonstrations and replayed executions.

cs.RO↗

arXiv2026

MolmoSpaces: A Large-Scale Open Ecosystem for Robot Navigation and Manipulation

Deploying robots at scale demands robustness to the long tail of everyday situations. The countless variations in scene layout, object geometry, and task specifications that characterize real environments are vast and underrepresented in existing robot benchmarks. Measuring this level of generalization requires infrastructure at a scale and diversity that physical evaluation alone cannot provide. We introduce MolmoSpaces, a fully open ecosystem to support large-scale benchmarking of robot policies. MolmoSpaces consists of over 230k diverse indoor environments, ranging from handcrafted household scenes to procedurally generated multiroom houses, populated with 130k richly annotated object assets, including 48k manipulable objects with 42M stable grasps. Crucially, these environments are simulator-agnostic, supporting popular options such as MuJoCo, Isaac, and ManiSkill. The ecosystem supports the full spectrum of embodied tasks: static and mobile manipulation, navigation, and multiroom long-horizon tasks requiring coordinated perception, planning, and interaction across entire indoor environments. We also design MolmoSpaces-Bench, a benchmark suite of 8 tasks in which robots interact with our diverse scenes and richly annotated objects. Our experiments show MolmoSpaces-Bench exhibits strong sim-to-real correlation (R = 0.96, \r{ho} = 0.98), confirm newer and stronger zero-shot policies outperform earlier versions in our benchmarks, and identify key sensitivities to prompt phrasing, initial joint positions, and camera occlusion. Through MolmoSpaces and its open-source assets and tooling, we provide a foundation for scalable data generation, policy training, and benchmark creation for robot learning research.

cs.RO↗

arXiv2026

Intent at a Glance: Gaze-Guided Robotic Manipulation via Foundation Models

Designing intuitive interfaces for robotic control remains a central challenge in enabling effective human-robot interaction, particularly in assistive care settings. Eye gaze offers a fast, non-intrusive, and intent-rich input modality, making it an attractive channel for conveying user goals. In this work, we present GAMMA (Gaze Assisted Manipulation for Modular Autonomy), a system that leverages ego-centric gaze tracking and a vision-language model to infer user intent and autonomously execute robotic manipulation tasks. By contextualizing gaze fixations within the scene, the system maps visual attention to high-level semantic understanding, enabling skill selection and parameterization without task-specific training. We evaluate GAMMA on a range of table-top manipulation tasks and compare it against baseline gaze-based control without reasoning. Results demonstrate that GAMMA provides robust, intuitive, and generalizable control, highlighting the potential of combining foundation models and gaze for natural and scalable robot autonomy. Project website: https://gamma0.vercel.app/

cs.RO↗

arXiv2025

Learning Tractable Distributions Of Language Model Continuations

Controlled generation imposes sequence-level constraints (syntax, style, safety) that depend on future tokens, making exact conditioning of an autoregressive LM intractable. Tractable surrogates such as HMMs can approximate continuation distributions and steer decoding, but standard surrogates are often weakly context-aware. We propose Learning to Look Ahead (LTLA), a hybrid method that uses base-LM embeddings to condition a globally learned tractable surrogate: a neural head predicts only a prefix-dependent latent prior, while a shared HMM answers continuation queries exactly. LTLA is designed to avoid two common efficiency traps when adding neural context. First, it avoids vocabulary-sized prefix rescoring (V extra LM evaluations) by scoring all next-token candidates via a single batched HMM forward update. Second, it avoids predicting a new HMM per prefix by learning one shared HMM and conditioning only the latent prior, which enables reuse of cached future-likelihood (backward) messages across decoding steps. Empirically, LTLA improves continuation likelihood over standard HMM surrogates, enables lookahead control for vision--language models by incorporating continuous context, achieves 100% syntactic constraint satisfaction, and improves detoxification while adding only a 14% decoding-time overhead.

cs.CL↗

arXiv2025

TRACE: Textual Reasoning for Affordance Coordinate Extraction

Vision-Language Models (VLMs) struggle to translate high-level instructions into the precise spatial affordances required for robotic manipulation. While visual Chain-of-Thought (CoT) methods exist, they are often computationally intensive. In this work, we introduce TRACE (Textual Reasoning for Affordance Coordinate Extraction), a novel methodology that integrates a textual Chain of Reasoning (CoR) into the affordance prediction process. We use this methodology to create the TRACE dataset, a large-scale collection created via an autonomous pipeline that pairs instructions with explicit textual rationales. By fine-tuning a VLM on this data, our model learns to externalize its spatial reasoning before acting. Our experiments show that our TRACE-tuned model achieves state-of-the-art performance, reaching 48.1% accuracy on the primary Where2Place (W2P) benchmark (a 9.6% relative improvement) and 55.0% on the more challenging W2P(h) subset. Crucially, an ablation study demonstrates that performance scales directly with the amount of reasoning data used, confirming the CoR's effectiveness. Furthermore, analysis of the model's attention maps reveals an interpretable reasoning process where focus shifts dynamically across reasoning steps. This work shows that training VLMs to generate a textual CoR is an effective and robust strategy for enhancing the precision, reliability, and interpretability of VLM-based robot control. Our dataset and code are available at https://github.com/jink-ucla/TRACE

cs.RO↗

arXiv2025

Ultrafast giant enhancement of second harmonic generation in a strongly correlated cobaltite

In quantum materials, nonlinear optical responses are highly sensitive to electronic structure and many-body interactions. Probing and manipulating such nonlinear processes is a complex and subtle endeavor, yet it offers deep insights into emerging physics and functionalities. Here, we report an anomalous ultrafast enhancement of second harmonic generation (SHG) in a strongly correlated cobaltite YbBaCo$_4$O$_7$. Above-bandgap femtosecond pumping increases SHG intensity by up to 60 % within 200 fs, with the enhancement persisting for tens of picoseconds. The enhancement is strongly anisotropic, with substantial amplification of in-plane susceptibility tensors, whereas the out-of-plane counterpart shows negligible change. We attribute these anomalies to ultrafast photodoping-induced modulation of the on-site Coulomb repulsion, which dynamically renormalizes the band structure and selectively amplifies specific $\chi^{(2)}$ components. These nonlinear dynamics encode rich information about the orbital symmetries and energies of the states involved, opening new avenues for all-optical probing of electronic structure in strongly correlated materials.

cond-mat.str-el↗

arXiv2025

Casper: Inferring Diverse Intents for Assistive Teleoperation with Vision Language Models

Assistive teleoperation, where control is shared between a human and a robot, enables efficient and intuitive human-robot collaboration in diverse and unstructured environments. A central challenge in real-world assistive teleoperation is for the robot to infer a wide range of human intentions from user control inputs and to assist users with correct actions. Existing methods are either confined to simple, predefined scenarios or restricted to task-specific data distributions at training, limiting their support for real-world assistance. We introduce Casper, an assistive teleoperation system that leverages commonsense knowledge embedded in pre-trained visual language models (VLMs) for real-time intent inference and flexible skill execution. Casper incorporates an open-world perception module for a generalized understanding of novel objects and scenes, a VLM-powered intent inference mechanism that leverages commonsense reasoning to interpret snippets of teleoperated user input, and a skill library that expands the scope of prior assistive teleoperation systems to support diverse, long-horizon mobile manipulation tasks. Extensive empirical evaluation, including human studies and system ablations, demonstrates that Casper improves task performance, reduces human cognitive load, and achieves higher user satisfaction than direct teleoperation and assistive teleoperation baselines. More information is available at https://ut-austin-rpl.github.io/casper/

cs.RO↗

arXiv2025

GraphPad: Inference-Time 3D Scene Graph Updates for Embodied Question Answering

Structured scene representations are a core component of embodied agents, helping to consolidate raw sensory streams into readable, modular, and searchable formats. Due to their high computational overhead, many approaches build such representations in advance of the task. However, when the task specifications change, such static approaches become inadequate as they may miss key objects, spatial relations, and details. We introduce GraphPad, a modifiable structured memory that an agent can tailor to the needs of the task through API calls. It comprises a mutable scene graph representing the environment, a navigation log indexing frame-by-frame content, and a scratchpad for task-specific notes. Together, GraphPad serves as a dynamic workspace that remains complete, current, and aligned with the agent's immediate understanding of the scene and its task. On the OpenEQA benchmark, GraphPad attains 55.3%, a +3.0% increase over an image-only baseline using the same vision-language model, while operating with five times fewer input frames. These results show that allowing online, language-driven refinement of 3-D memory yields more informative representations without extra training or data collection.

cs.AI↗

arXiv2025

SAMJAM: Zero-Shot Video Scene Graph Generation for Egocentric Kitchen Videos

Video Scene Graph Generation (VidSGG) is an important topic in understanding dynamic kitchen environments. Current models for VidSGG require extensive training to produce scene graphs. Recently, Vision Language Models (VLM) and Vision Foundation Models (VFM) have demonstrated impressive zero-shot capabilities in a variety of tasks. However, VLMs like Gemini struggle with the dynamics for VidSGG, failing to maintain stable object identities across frames. To overcome this limitation, we propose SAMJAM, a zero-shot pipeline that combines SAM2's temporal tracking with Gemini's semantic understanding. SAM2 also improves upon Gemini's object grounding by producing more accurate bounding boxes. In our method, we first prompt Gemini to generate a frame-level scene graph. Then, we employ a matching algorithm to map each object in the scene graph with a SAM2-generated or SAM2-propagated mask, producing a temporally-consistent scene graph in dynamic environments. Finally, we repeat this process again in each of the following frames. We empirically demonstrate that SAMJAM outperforms Gemini by 8.33% in mean recall on the EPIC-KITCHENS and EPIC-KITCHENS-100 datasets.

cs.CV↗