arXiv Science⌕ Search

arXiv subjects

Yuan Liu

Publications and source records attributed to Yuan Liu.

At least 253 records · Page 14Linked to original sources

Evaluating AI systems under uncertain ground truth: a case study in dermatology

For safety, medical AI systems undergo thorough evaluations before deployment, validating their predictions against a ground truth which is assumed to be fixed and certain. However, this ground truth is often curated in the form of differential diagnoses. While a single differential diagnosis reflects the uncertainty in one expert assessment, multiple experts introduce another layer of uncertainty through disagreement. Both forms of uncertainty are ignored in standard evaluation which aggregates these differential diagnoses to a single label. In this paper, we show that ignoring uncertainty leads to overly optimistic estimates of model performance, therefore underestimating risk associated with particular diagnostic decisions. To this end, we propose a statistical aggregation approach, where we infer a distribution on probabilities of underlying medical condition candidates themselves, based on observed annotations. This formulation naturally accounts for the potential disagreements between different experts, as well as uncertainty stemming from individual differential diagnoses, capturing the entire ground truth uncertainty. Our approach boils down to generating multiple samples of medical condition probabilities, then evaluating and averaging performance metrics based on these sampled probabilities. In skin condition classification, we find that a large portion of the dataset exhibits significant ground truth uncertainty and standard evaluation severely over-estimates performance without providing uncertainty estimates. In contrast, our framework provides uncertainty estimates on common metrics of interest such as top-k accuracy and average overlap, showing that performance can change multiple percentage points. We conclude that, while assuming a crisp ground truth can be acceptable for many AI applications, a more nuanced evaluation protocol should be utilized in medical diagnosis.

cs.LG↗

Scalable Reinforcement Post-Training Beyond Static Human Prompts: Evolving Alignment via Asymmetric Self-Play

Current reinforcement learning (RL) frameworks for large language models (LLM) post-training typically assume a fixed prompt distribution, which is sub-optimal and bottlenecks scalability. Prior works have explored prompt evolving, but are often limited to the supervised fine-tuning stage, and prompts are sampled and evolved uniformly without signals. This empirical work presents a paradigm shift: Evolving Alignment via Asymmetric Self-Play (eva), that casts post-training as an infinite game with regret-based signals for 2 players: (i) a creator, who strategically samples and creates new informative prompts and (ii) a solver, who learns to produce preferred responses. eva is the first method that allows language models to adaptively create training prompts in both offline and online RL post-training. The design is simple, easy-to-use yet remarkably effective: eva sets a new SOTA on challenging benchmarks, without any extra human prompts, e.g. it boosts the win-rate of gemma-2-9b-it on Arena-Hard by 51.6% -> 60.1% for DPO and 52.6% -> 62.4% for RLOO, surpassing claude-3-opus and catching up to gemini-1.5-pro, both of which are orders of magnitude larger. Extensive experiments show eva can create effective RL curricula and is robust across ablations. We believe adaptively evolving prompts are key to designing the next-generation RL post-training scheme.

cs.CL↗

3R-GS: Best Practice in Optimizing Camera Poses Along with 3DGS

3D Gaussian Splatting (3DGS) has revolutionized neural rendering with its efficiency and quality, but like many novel view synthesis methods, it heavily depends on accurate camera poses from Structure-from-Motion (SfM) systems. Although recent SfM pipelines have made impressive progress, questions remain about how to further improve both their robust performance in challenging conditions (e.g., textureless scenes) and the precision of camera parameter estimation simultaneously. We present 3R-GS, a 3D Gaussian Splatting framework that bridges this gap by jointly optimizing 3D Gaussians and camera parameters from large reconstruction priors MASt3R-SfM. We note that naively performing joint 3D Gaussian and camera optimization faces two challenges: the sensitivity to the quality of SfM initialization, and its limited capacity for global optimization, leading to suboptimal reconstruction results. Our 3R-GS, overcomes these issues by incorporating optimized practices, enabling robust scene reconstruction even with imperfect camera registration. Extensive experiments demonstrate that 3R-GS delivers high-quality novel view synthesis and precise camera pose estimation while remaining computationally efficient. Project page: https://zsh523.github.io/3R-GS/

cs.CV↗

A Two-Timescale Approach for Wireless Federated Learning with Parameter Freezing and Power Control

Federated learning (FL) enables distributed devices to train a shared machine learning (ML) model collaboratively while protecting their data privacy. However, the resource-limited mobile devices suffer from intensive computation-and-communication costs of model parameters. In this paper, we observe the phenomenon that the model parameters tend to be stabilized long before convergence during training process. Based on this observation, we propose a two-timescale FL framework by joint optimization of freezing stabilized parameters and controlling transmit power for the unstable parameters to balance the energy consumption and convergence. First, we analyze the impact of model parameter freezing and unreliable transmission on the convergence rate. Next, we formulate a two-timescale optimization problem of parameter freezing percentage and transmit power to minimize the model convergence error subject to the energy budget. To solve this problem, we decompose it into parallel sub-problems and decompose each sub-problem into two different timescales problems using the Lyapunov optimization method. The optimal parameter freezing and power control strategies are derived in an online fashion. Experimental results demonstrate the superiority of the proposed scheme compared with the benchmark schemes.

cs.LG↗

MMGen: Unified Multi-modal Image Generation and Understanding in One Go

A unified diffusion framework for multi-modal generation and understanding has the transformative potential to achieve seamless and controllable image diffusion and other cross-modal tasks. In this paper, we introduce MMGen, a unified framework that integrates multiple generative tasks into a single diffusion model. This includes: (1) multi-modal category-conditioned generation, where multi-modal outputs are generated simultaneously through a single inference process, given category information; (2) multi-modal visual understanding, which accurately predicts depth, surface normals, and segmentation maps from RGB images; and (3) multi-modal conditioned generation, which produces corresponding RGB images based on specific modality conditions and other aligned modalities. Our approach develops a novel diffusion transformer that flexibly supports multi-modal output, along with a simple modality-decoupling strategy to unify various tasks. Extensive experiments and applications demonstrate the effectiveness and superiority of MMGen across diverse tasks and conditions, highlighting its potential for applications that require simultaneous generation and understanding.

cs.CV↗

CADDreamer: CAD Object Generation from Single-view Images

Diffusion-based 3D generation has made remarkable progress in recent years. However, existing 3D generative models often produce overly dense and unstructured meshes, which stand in stark contrast to the compact, structured, and sharply-edged Computer-Aided Design (CAD) models crafted by human designers. To address this gap, we introduce CADDreamer, a novel approach for generating boundary representations (B-rep) of CAD objects from a single image. CADDreamer employs a primitive-aware multi-view diffusion model that captures both local geometric details and high-level structural semantics during the generation process. By encoding primitive semantics into the color domain, the method leverages the strong priors of pre-trained diffusion models to align with well-defined primitives. This enables the inference of multi-view normal maps and semantic maps from a single image, facilitating the reconstruction of a mesh with primitive labels. Furthermore, we introduce geometric optimization techniques and topology-preserving extraction methods to mitigate noise and distortion in the generated primitives. These enhancements result in a complete and seamless B-rep of the CAD model. Experimental results demonstrate that our method effectively recovers high-quality CAD objects from single-view images. Compared to existing 3D generation techniques, the B-rep models produced by CADDreamer are compact in representation, clear in structure, sharp in edges, and watertight in topology.

cs.CV↗

DICE: End-to-end Deformation Capture of Hand-Face Interactions from a Single Image

Reconstructing 3D hand-face interactions with deformations from a single image is a challenging yet crucial task with broad applications in AR, VR, and gaming. The challenges stem from self-occlusions during single-view hand-face interactions, diverse spatial relationships between hands and face, complex deformations, and the ambiguity of the single-view setting. The first and only method for hand-face interaction recovery, Decaf, introduces a global fitting optimization guided by contact and deformation estimation networks trained on studio-collected data with 3D annotations. However, Decaf suffers from a time-consuming optimization process and limited generalization capability due to its reliance on 3D annotations of hand-face interaction data. To address these issues, we present DICE, the first end-to-end method for Deformation-aware hand-face Interaction reCovEry from a single image. DICE estimates the poses of hands and faces, contacts, and deformations simultaneously using a Transformer-based architecture. It features disentangling the regression of local deformation fields and global mesh vertex locations into two network branches, enhancing deformation and contact estimation for precise and robust hand-face mesh recovery. To improve generalizability, we propose a weakly-supervised training approach that augments the training set using in-the-wild images without 3D ground-truth annotations, employing the depths of 2D keypoints estimated by off-the-shelf models and adversarial priors of poses for supervision. Our experiments demonstrate that DICE achieves state-of-the-art performance on a standard benchmark and in-the-wild data in terms of accuracy and physical plausibility. Additionally, our method operates at an interactive rate (20 fps) on an Nvidia 4090 GPU, whereas Decaf requires more than 15 seconds for a single image. Our code will be publicly available upon publication.

cs.CV↗

GAGS: Granularity-Aware Feature Distillation for Language Gaussian Splatting

3D open-vocabulary scene understanding, which accurately perceives complex semantic properties of objects in space, has gained significant attention in recent years. In this paper, we propose GAGS, a framework that distills 2D CLIP features into 3D Gaussian splatting, enabling open-vocabulary queries for renderings on arbitrary viewpoints. The main challenge of distilling 2D features for 3D fields lies in the multiview inconsistency of extracted 2D features, which provides unstable supervision for the 3D feature field. GAGS addresses this challenge with two novel strategies. First, GAGS associates the prompt point density of SAM with the camera distances, which significantly improves the multiview consistency of segmentation results. Second, GAGS further decodes a granularity factor to guide the distillation process and this granularity factor can be learned in a unsupervised manner to only select the multiview consistent 2D features in the distillation process. Experimental results on two datasets demonstrate significant performance and stability improvements of GAGS in visual grounding and semantic segmentation, with an inference speed 2$\times$ faster than baseline methods. The code and additional results are available at https://pz0826.github.io/GAGS-Webpage/ .

cs.CV↗

EP240801a/XRF 240801B: An X-ray Flash Detected by the Einstein Probe and Implications of its Multiband Afterglow

We present multiband observations and analysis of EP240801a, a low-energy, extremely soft gamma-ray burst (GRB) discovered on August 1, 2024 by the Einstein Probe (EP) satellite, with a weak contemporaneous signal also detected by Fermi/GBM. Optical spectroscopy of the afterglow, obtained by GTC and Keck, identified the redshift of $z = 1.6734$. EP240801a exhibits a burst duration of 148 s in X-rays and 22.3 s in gamma-rays, with X-rays leading by 80.61 s. Spectral lag analysis indicates the gamma-ray signal arrived 8.3 s earlier than the X-rays. Joint spectral fitting of EP/WXT and Fermi/GBM data yields an isotropic energy $E_{γ,\rm{iso}} = (5.57^{+0.54}_{-0.50})\times 10^{51}\,\rm{erg}$, a peak energy $E_{\rm{peak}} = 14.90^{+7.08}_{-4.71}\,\rm{keV}$, a fluence ratio $\rm S(25-50\,\rm{keV})/S(50-100\,\rm{keV}) = 1.67^{+0.74}_{-0.46}$, classifying EP240801a as an X-ray flash (XRF). The host-galaxy continuum spectrum, inferred using Prospector, was used to correct its contribution for the observed outburst optical data. Unusual early $R$-band behavior and EP/FXT observations suggest multiple components in the afterglow. Three models are considered: two-component jet model, forward-reverse shock model and forward-shock model with energy injection. Both three provide reasonable explanations. The two-component jet model and the energy injection model imply a relatively small initial energy and velocity of the jet in the line of sight, while the forward-reverse shock model remains typical. Under the two-component jet model, EP240801a may resemble GRB 221009A (BOAT) if the bright narrow beam is viewed on-axis. Therefore, EP240801a can be interpreted as an off-beam (narrow) jet or an intrinsically weak GRB jet. Our findings provide crucial clues for uncovering the origin of XRFs.

astro-ph.HE↗

Asymptotic stability for non-equicontinuous Markov semigroups

We formulate a new criterion of the asymptotic stability for some non-equicontinuous Markov semigroups, the so-called eventually continuous semigroups. In particular, we provide a non-equicontinuous Markov semigroup example with essential randomness, which is asymptotically stable.

math.PR↗

RRM: Robust Reward Model Training Mitigates Reward Hacking

Reward models (RMs) play a pivotal role in aligning large language models (LLMs) with human preferences. However, traditional RM training, which relies on response pairs tied to specific prompts, struggles to disentangle prompt-driven preferences from prompt-independent artifacts, such as response length and format. In this work, we expose a fundamental limitation of current RM training methods, where RMs fail to effectively distinguish between contextual signals and irrelevant artifacts when determining preferences. To address this, we introduce a causal framework that learns preferences independent of these artifacts and propose a novel data augmentation technique designed to eliminate them. Extensive experiments show that our approach successfully filters out undesirable artifacts, yielding a more robust reward model (RRM). Our RRM improves the performance of a pairwise reward model trained on Gemma-2-9b-it, on RewardBench, increasing accuracy from 80.61% to 84.15%. Additionally, we train two DPO policies using both the RM and RRM, demonstrating that the RRM significantly enhances DPO-aligned policies, improving MT-Bench scores from 7.27 to 8.31 and length-controlled win-rates in AlpacaEval-2 from 33.46% to 52.49%.

cs.CL↗

Bieri-Neumann-Strebel-Renz invariants and tropical varieties of integral homology jump loci

Papadima and Suciu studied the relationship between the Bieri-Neumann-Strebel-Renz (short as BNSR) invariants of spaces and the homology jump loci of rank one local systems. Recently, Suciu improved these results using the tropical variety associated to the homology jump loci of complex rank one local systems. In particular, the translated positive-dimensional component of homology jump loci can be detected by its tropical variety. In this paper, we generalize Suciu's results to integral coefficients and give a better upper bound for the BNSR invariants. Then we provide applications mainly to Kähler groups. Specifically, we classify the Kähler group contained in a large class of groups, which we call the weighted right-angled Artin groups. This class of groups comes from the edge-weighted finite simple graphs and is a natural generalization of the right-angled Artin groups.

math.GT↗

LEIA discovery of the longest-lasting and most energetic stellar X-ray flare ever detected

The Lobster Eye Imager for Astronomy (LEIA) detected a new X-ray transient on 2022 November 7, identified as a superflare event occurring on a nearby K-type giant star HD 251108. The flux increase was also detected in follow-up observations at X-ray, UV and optical wavelengths. The flare lasted for about 40 days in soft X-ray observations, reaching a peak luminosity of ~1.1 * 10^34 erg/s in 0.5-4.0 keV, which is roughly 60 times the quiescent luminosity. Optical brightening was observed for only one night. The X-ray light curve is well described by a double fast rise and exponential decay model, attributed to the cooling process of a loop arcade structure formed subsequent to the initial large loop with a half-length of ~1.9 * 10^12 cm. Time-resolved X-ray spectra were fitted by a four-temperature apec model (with three components being the quiescent background), showing significant evolution of plasma temperature and emission measure over time. The estimated energy released in the LEIA band is ~3 * 10^39 erg, suggesting that this is likely the most energetic X-ray stellar flare with the longest duration detected to date.

astro-ph.HE↗

MVTokenFlow: High-quality 4D Content Generation using Multiview Token Flow

In this paper, we present MVTokenFlow for high-quality 4D content creation from monocular videos. Recent advancements in generative models such as video diffusion models and multiview diffusion models enable us to create videos or 3D models. However, extending these generative models for dynamic 4D content creation is still a challenging task that requires the generated content to be consistent spatially and temporally. To address this challenge, MVTokenFlow utilizes the multiview diffusion model to generate multiview images on different timesteps, which attains spatial consistency across different viewpoints and allows us to reconstruct a reasonable coarse 4D field. Then, MVTokenFlow further regenerates all the multiview images using the rendered 2D flows as guidance. The 2D flows effectively associate pixels from different timesteps and improve the temporal consistency by reusing tokens in the regeneration process. Finally, the regenerated images are spatiotemporally consistent and utilized to refine the coarse 4D field to get a high-quality 4D field. Experiments demonstrate the effectiveness of our design and show significantly improved quality than baseline methods.

cs.CV↗

Clifford circuit based heuristic optimization of fermion-to-qubit mappings

Simulation of interacting fermionic Hamiltonians is one of the most promising applications of quantum computers. However, the feasibility of analysing fermionic systems with a quantum computer hinges on the efficiency of fermion-to-qubit mappings that encode non-local fermionic degrees of freedom in local qubit degrees of freedom. While recent works have highlighted the importance of designing fermion-to-qubit mappings that are tailored to specific problem Hamiltonians, the methods proposed so far are either restricted to a narrow class of mappings or they use computationally expensive and unscalable brute-force search algorithms. Here, we address this challenge by designing a $\mathrm{\textbf{heuristic}}$ numerical optimization framework for fermion-to-qubit mappings. To this end, we first translate the fermion-to-qubit mapping problem to a Clifford circuit optimization problem, and then use simulated annealing to optimize the average Pauli weight of the problem Hamiltonian. For all fermionic Hamiltonians we have considered, the numerically optimized mappings outperform their conventional counterparts, including ternary-tree-based mappings that are known to be optimal for single creation and annihilation operators. We find that our optimized mappings yield between $15\%$ to $40\%$ improvements on the average Pauli weight when the simulation Hamiltonian has an intermediate level of complexity. Most remarkably, the optimized mappings improve the average Pauli weight for $6 \times 6$ nearest-neighbor hopping and Hubbard models by more than $40\%$ and $20\%$, respectively. Surprisingly, we also find specific interaction Hamiltonians for which the optimized mapping outperform $\mathrm{\textbf{any}}$ ternary-tree-based mapping. Our results establish heuristic numerical optimization as an effective method for obtaining mappings tailored for specific fermionic Hamiltonian.

quant-ph↗

GaussianAvatar-Editor: Photorealistic Animatable Gaussian Head Avatar Editor

We introduce GaussianAvatar-Editor, an innovative framework for text-driven editing of animatable Gaussian head avatars that can be fully controlled in expression, pose, and viewpoint. Unlike static 3D Gaussian editing, editing animatable 4D Gaussian avatars presents challenges related to motion occlusion and spatial-temporal inconsistency. To address these issues, we propose the Weighted Alpha Blending Equation (WABE). This function enhances the blending weight of visible Gaussians while suppressing the influence on non-visible Gaussians, effectively handling motion occlusion during editing. Furthermore, to improve editing quality and ensure 4D consistency, we incorporate conditional adversarial learning into the editing process. This strategy helps to refine the edited results and maintain consistency throughout the animation. By integrating these methods, our GaussianAvatar-Editor achieves photorealistic and consistent results in animatable 4D Gaussian editing. We conduct comprehensive experiments across various subjects to validate the effectiveness of our proposed techniques, which demonstrates the superiority of our approach over existing methods. More results and code are available at: [Project Link](https://xiangyueliu.github.io/GaussianAvatar-Editor/).

cs.CV↗

Implementing Finite Impulse Response Filters on Quantum Computers

While signal processing is a mature area, its connections with quantum computing have received less attention. In this work, we propose approaches that perform classical discrete-time signal processing using quantum systems. Our approaches encode the classical discrete-time input signal into quantum states, and design unitaries to realize classical concepts of finite impulse response (FIR) filters. We also develop strategies to cascade lower-order filters to realize higher-order filters through designing appropriate unitary operators. Finally, a few directions for processing quantum states on classical systems after converting them to classical signals are suggested for future work.

eess.SP↗

Science objectives of the Einstein Probe mission

The Einstein Probe (EP) is an interdisciplinary mission of time-domain and X-ray astronomy. Equipped with a wide-field lobster-eye X-ray focusing imager, EP will discover cosmic X-ray transients and monitor the X-ray variability of known sources in 0.5-4 keV, at a combination of detecting sensitivity and cadence that is not accessible to the previous and current wide-field monitoring missions. EP can perform quick characterisation of transients or outbursts with a Wolter-I X-ray telescope onboard. In this paper, the science objectives of the Einstein Probe mission are presented. EP is expected to enlarge the sample of previously known or predicted but rare types of transients with a wide range of timescales. Among them, fast extragalactic transients will be surveyed systematically in soft X-rays, which include γ-ray bursts and their variants, supernova shock breakouts, and the predicted X-ray transients associated with binary neutron star mergers. EP will detect X-ray tidal disruption events and outbursts from active galactic nuclei, possibly at an early phase of the flares for some. EP will monitor the variability and outbursts of X-rays from white dwarfs, neutron stars and black holes in our and neighbouring galaxies at flux levels fainter than those detectable by the current instruments, and is expected to discover new objects. A large sample of stellar X-ray flares will also be detected and characterised. In the era of multi-messenger astronomy, EP has the potential of detecting the possible X-ray counterparts of gravitational wave events, neutrino sources, and ultra-high energy γ-ray and cosmic ray sources. EP is expected to help advance the studies of extreme objects/phenomena and their underlying physical processes revealed in the dynamic X-ray universe, as well as studies in other areas of X-ray astronomy.

astro-ph.HE↗