arXiv subjects

Yu Zhang

Publications and source records attributed to Yu Zhang.

At least 73 records · Page 4Linked to original sources

arXiv2026

One-Stage Multi-Task Instruction-Guided 3D Spatial Audio Editing

Spatial audio editing modifies an existing soundfield according to a user's instruction while preserving the rest of the scene. Unlike conventional audio editing, it must reason jointly about audio events, spatial information, dynamic changes, and environmental information in first-order Ambisonic (FOA) waveforms. Existing language-guided editors mainly target conventional audio or rely on sequential operations, and therefore do not directly support one-stage editing for complex 3D spatial instructions. We present SwanWeave, the first one-stage multi-task framework for instruction-guided 3D FOA spatial audio editing. We build paired FOA supervision from open-source speech and sound-effect corpora using controllable room simulation, covering more than ten single-operation and compound tasks across the four editing axes. To handle this heterogeneous edit space, SwanWeave uses Spatial Edit Mixture-of-Experts (SE-MoE) with dual-level routing, selecting task-aware expert combinations for compound instructions and frame-level routed/null experts for local edit decisions. We further introduce Spatial Preference Optimization (SPO), a Direct Preference Optimization (DPO)-based alignment objective with edit-specific negative targets, and adopt staged training to improve natural-language grounding. Experiments show that SwanWeave achieves better editing quality than existing general audio editors and spatial audio baselines across all tasks. Spatial audio editing demos can be found at https://swanaigc.github.io/#swanweave, code can be found at: https://github.com/MM-Speech/SwanWeave.

cs.SD↗

arXiv2026

Rethinking Learned Occupancy in Autonomous Active Mapping with Observation-Gated Filtering

Autonomous 3D active mapping requires a space robot to choose where to sense while building the geometry needed for navigation. Learned occupancy completion extends spatial context beyond the current field of view, but one predicted map often serves two planning roles: it scores expected surface gain and constrains collision-free motion. Unsupported occupancy can therefore distort both where the robot looks and where it believes it can travel. We study this coupled interface in a controlled closed-loop benchmark by holding the active-mapping system fixed and varying only its planner-facing occupancy across observation-only, learned, oracle-corrected, and ground-truth conditions. Improving occupancy accuracy does not monotonically improve closed-loop coverage: across 25 starts, planning with ground-truth occupancy reaches 70% of the learned baseline's final coverage 12.7 steps earlier on average, while increasing final coverage by only 0.031. Guided by this diagnosis, we introduce an observation-gated filter that retains completion in insufficiently observed regions and suppresses predictions only after repeated frustum exposure without nearby RGB-D support. The filter improves both targeted failure-prone starts without retraining or ground truth. These results motivate online revision of planner-facing geometry during autonomous intervals between communication windows. The current study assumes benchmark RGB-D observations and sufficiently accurate pose estimates; planetary sensing conditions and accumulated localization drift remain to be evaluated.

cs.RO↗

arXiv2026

The fading hierarchy of Galactic open clusters

Galactic open clusters provide a record of both hierarchical star formation and the subsequent dynamical evolution of the Milky Way disk. We use the two-point correlation function to characterize the spatial and kinematic clustering of open clusters in the solar neighborhood, considering their three-dimensional (3D) distributions and their projections onto the Galactic plane, as well as subsamples divided by age, mass, and survey volume. We quantify the clustering through fractal dimensions and characteristic correlation scales. We find that the youngest clusters have fractal dimensions comparable to those measured in the interstellar medium, suggesting that they retain part of the hierarchical structure of their natal molecular clouds. The clustering strength then decreases systematically with age and becomes weak on a characteristic timescale of order 100 Myr. This evolution is scale dependent: the excess correlation at tens of parsecs fades more rapidly than the weaker correlation at hundreds of parsecs. By contrast, we find only a weak dependence of the clustering properties on cluster mass and volume. Using the same cluster sample, we derive an empirical mapping between projected and 3D fractal dimensions, providing an observational calibration for comparing the Milky Way with studies of external galaxies, where only projected measurements are available. The open-cluster population exhibits characteristic spatial and kinematic clustering scales of approximately 370 pc and 11 km/s, respectively. These results support a picture in which young open clusters inherit a spatial hierarchy from star formation and progressively lose their spatial correlations through subsequent evolution.

astro-ph.GA↗

arXiv2026

Spatial-Omni: Spatial Audio Understanding Integration in Multimodal LLMs via FOA Encoding

Recent multimodal large language models mainly process audio as monaural signals, thereby discarding the spatial cues contained in spatial audio for sound localization, spatial relation reasoning, and spatial scene understanding. We propose Spatial-Omni, a lightweight method that implements SO-Encoder to inject First-Order Ambisonics (FOA) spatial audio into existing Omni LLMs as an independent modality, without modifying their original audio encoders. SO-Encoder provides spatial tokens with limited additional context cost and improves spatial audio understanding through efficient staged training. To support training and evaluation, we construct SO-Dataset, SO-QA, and SO-Bench from open-source data, real recordings, and simulations, containing 400K FOA spatial audio clips and 2.1M spatial question answering pairs. SO-Bench covers 16 spatial audio understanding subtasks, including basic detection and location estimation, spatial relation understanding, and complex spatial reasoning. Experiments show that Spatial-Omni outperforms existing open-source Large Audio-Language Models (LALMs) and Omni LLM models on spatial audio understanding tasks while retaining a reasonable level of general audio understanding. Code and data are available at https://github.com/dieKarotte/Spatial-Omni.

eess.AS↗

arXiv2026

StageWell: A Process-Aligned Chinese Corpus for Positive-Psychology Support Dialogue

Positive psychology dialogue aims to support emotional distress and positive resource building, requiring models to produce not only empathetic replies but also coherent progression through a multi-turn support process. Existing resources often reduce supervision to turn-level strategies or holistic preference labels, leaving process position, support function, and local repair targets implicit. We introduce StageWell, a process-aligned Chinese corpus for positive psychology dialogue, together with HQS, a structured protocol for data construction and evaluation. StageWell organizes support into a six-stage support process and uses a multi-agent whole-dialogue rewriting workflow to construct 12,445 SFT instances, 1,849 DPO preference pairs, and a GroundTruth subset of 120 expert-revised dialogues and 977 QA pairs. Guided by HQS, DPO pairs are built as process-localized repairs: flawed model outputs are used as rejected responses, and targeted rewrites under the same context and stage constraint are used as chosen responses. Across four 9B-14B open-source LLMs, this supervision yields robust gains in process control, response quality, and safety. Averaged across models, BERTScore improves by 0.037, Q-Overall increases by 1.32 points, S-exact increases by 0.236, and the H-critical rate decreases by 0.167. These results highlight the value of modeling supportive dialogue as a structured multi-turn support process rather than as single-turn response generation.

cs.CL↗

arXiv2026

Thermodynamics and phase transitions of spherically symmetric AdS regular black holes

We obtain the singular ''mother'' black hole solution by solving the coupling between Einstein gravity with a cosmological constant and a nonlinear electromagnetic field. The thermodynamic quantities of the ''mother'' black hole are first derived in the unconstrained phase space $(S, q, α, P)$, after which the regularity condition $M = q^3/α$ is imposed to obtain the thermodynamic quantities of a class of spherically symmetric AdS regular black holes self-consistently. We distinguish two categories of thermodynamic quantities: fundamental conjugate variables defined by the first law, and thermodynamic response functions constructed from them. For response functions involving second-order derivatives -- in particular the heat capacity -- we show that the order of constraint imposition and derivative calculation cannot be interchanged, and the correct procedure is to first impose the constraint and then construct the response function. Within this framework, we find that when $P<P_c$, the $G$--$T$ diagram exhibits a behavior qualitatively different from the swallowtail behavior of the standard RN-AdS black hole. Instead, it exhibits an 8-shaped structure for $P<P_z$ and a C-shaped structure for $P_z<P<P_c$, corresponding to first-order and zeroth-order phase transitions between small and large black hole phases, respectively. Imposing the regularity condition thus leads to a richer phase structure for this class of black holes than the standard RN-AdS case.

gr-qc↗

arXiv2026

Evidence of Crystal-Field-Mediated Anisotropic Orbital Rashba Effect in Epitaxial Ru/FM Heterostructure

Electrical generation of orbital angular momentum provides a promising route to current-induced torques, yet effective control of orbital Rashba textures still remains challenging, particularly because the role of the interfacial crystal field remains largely unexplored. Here, we report experimental evidence for a crystal-field-mediated interfacial anisotropic orbital Rashba effect (AORE) in epitaxial Ru/ferromagnet heterostructures. Total orbital torque was disentangled into an isotropic bulk contribution and an in-plane anisotropic interfacial contribution. The latter was strongly suppressed by degrading the crystallinity of either constituent and by inserting a Cu spacer, highlighting the essential roles of coherent interfacial orbital hybridization and direct Ru/ferromagnet contact. These results identify interfacial crystal-field coherency as a key ingredient in manipulating orbital Rashba textures and establish a route toward engineering the symmetry and directionality of orbital torques.

cond-mat.mes-hall↗

arXiv2026

FADTI: Fourier and Attention Driven Diffusion for Multivariate Time Series Imputation

Multivariate time series imputation is fundamental in applications such as healthcare, traffic forecasting, and biological modeling, where sensor failures and irregular sampling lead to pervasive missing values. Existing Transformer- and diffusion-based imputers achieve strong performance, but they often rely mainly on time-domain modeling and lack adaptive spectral bias for recovering structured temporal gaps. We propose FADTI, a Fourier- and attention-driven diffusion framework for multivariate time series imputation. FADTI introduces a Fourier Bias Projection (FBP) module that injects learnable frequency-aware bias into intermediate hidden states during denoising. It projects intermediate hidden states onto Fourier bases, avoiding direct spectral estimation from masked or zero-filled inputs. With DFT, STFT, and FSST instantiations, FBP captures global periodicity, localized time--frequency variations, and non-stationary oscillatory patterns. By coupling FBP with self-attention and gated convolution, FADTI integrates frequency-domain guidance, temporal dependency modeling, and probabilistic denoising in a unified framework. Experiments on multiple benchmarks, including a new biological imputation benchmark, show that FADTI improves accuracy, uncertainty estimation, and sampling efficiency, especially under high missing rates and structured missing patterns. Code is available at https://github.com/RazeenLI/FADTI

cs.LG↗

arXiv2026

CogEvol: Towards Efficient and Reliable Learning Environment Generation

We present CogEvol, a family of models trained specifically for Learning Environment Generation: turning a course brief into a finished learning artifact (structured-JSON slides or self-contained interactive HTML pages) in a single pass. Across 220k production requests, CogEvol completes a slide in a median of 17 seconds and an interactive page in 59, replacing minutes-long multi-turn agent scaffolding. Reliability is enforced rather than hoped for: a production-grounded data pipeline turns real failures into 53,687 verified SFT samples, and a hybrid rule-plus-VLM reward drives GRPO-based RL, hardened after we caught and fixed a reward-hacking episode that produced visually convincing but unplayable games. CogEvol-27B scores 83.7 on slide quality and 63.7 on a 500-case interactive-HTML benchmark with 26.9x fewer parameters than flagship coding models, and, in collaboration with the OpenMAIC team, serves their live production traffic. CogEvol-4B is released openly under the Apache 2.0 license at https://github.com/CogEvol/CogEvol-4B; external flagships are measured on the same suites under the identical harness. Scaffold editing cuts interactive-page generation cost by a further ~76%, and the full stack runs on domestic Ascend accelerators at application-level parity with A800 GPUs, lowering the unit cost of AI-native education at scale.

cs.CL↗

arXiv2026

Probing the dark axion portal via $J/ψ$ decays at BESIII and STCF

Large numbers of $J/ψ$ mesons can be resonantly produced at BESIII and STCF at the center-of-mass energy $\sqrt{s}=3.097$~GeV. Such $J/ψ$ mesons may undergo rare decays into an axionlike particle (ALP) $a$ and a dark photon $γ'$ through the dark axion portal. We investigate the exclusion reach of the existing BESIII dataset and the projected sensitivity of STCF, focusing on the mono-photon signature. We perform Monte Carlo simulations of the signal and estimate both the irreducible $J/ψ\toγν\barν$ background and the continuum and resonant three-photon reducible backgrounds. Detector-induced migration of three-photon events into the mono-photon signal region is parameterized by the event-level leakage probability $ε_{3γ}^{\rm leak}=0,10^{-6},10^{-4},10^{-3}$. In the zero- and sufficiently small-leakage benchmarks, the existing BESIII dataset could probe previously unexplored parameter space, while STCF can further improve the coupling reach. Increasing leakage probabilities progressively weaken these projections, highlighting the importance of detector-level three-photon rejection in realizing the projected reach.

hep-ph↗

arXiv2026

Figures as Programs: Recursive Generation of Editable Scientific Figures

Scientific methodology figures are essential for communicating complex methods clearly, yet creating them remains labor-intensive and typically requires multiple rounds of refinement. Recent image-generation models can synthesize visually appealing raster figures, but producing a human-satisfactory result in a single generation step remains difficult. Moreover, precise edits to raster figures are challenging for both humans and models. We formulate scientific figure generation as recursive SVG program construction and propose \textsc{FigTree}, a \textit{multi-agent} system that automatically transforms a scientific paper into a structured vector figure. \textsc{FigTree} grounds figure content in the source paper, decomposes a figure into a hierarchy of local regions, generates each region as a short SVG program, and assembles the resulting fragments. A render-critic refinement loop jointly inspects the rendered figure and its underlying program, enabling visual defects to be traced to specific statements and accurately repaired. We conduct extensive evaluations of \textsc{FigTree} on figure quality and editability, showing that \textsc{FigTree} produces high-quality figures, while also enabling more effective editing than existing raster-based methods.

cs.AI↗

arXiv2026

HybridWorldSim: A Scalable and Controllable High-fidelity Simulator for Autonomous Driving

Realistic and controllable simulation is critical for advancing end-to-end autonomous driving, yet existing approaches often struggle to support novel view synthesis under large viewpoint changes or to ensure geometric consistency. We introduce HybridWorldSim, a hybrid simulation framework that integrates multi-traversal neural reconstruction for static backgrounds with generative modeling for dynamic agents. This unified design addresses key limitations of previous methods, enabling the creation of diverse and high-fidelity driving scenarios with reliable visual and spatial consistency. To facilitate robust benchmarking, we further release a new multi-traversal dataset MIRROR that captures a wide range of routes and environmental conditions across different cities. Extensive experiments demonstrate that HybridWorldSim surpasses previous state-of-the-art methods, providing a practical and scalable solution for high-fidelity simulation and a valuable resource for research and development in autonomous driving.

cs.CV↗

arXiv2026

SetMIR: Multi-Interest Retrieval as Set Prediction

Embedding-based retrieval is at the core of industrial recommender systems, but a single user embedding is often too limited to capture a user's diverse interests. Multi-interest retrieval addresses this by using multiple user embeddings, yet existing methods still suffer from two issues: interest collapse, where different embeddings learn the same interest, and static dispatch, where serving uses a fixed retrieval budget even when some embeddings are unnecessary. We propose SetMIR, which treats multi-interest retrieval as a set prediction problem. SetMIR encodes a user's behavior history with a transformer and uses K learnable queries to decode a set of user interests, each producing a retrieval embedding and a presence score. During training, Hungarian matching assigns targets to queries one-to-one, so matched queries learn distinct interests and the presence head learns which queries are active. At serving time, SetMIR uses presence scores and query-level Non-Maximum Suppression (NMS) to issue only active, non-redundant ANN queries. On Snap's Dynamic Product Ads (DPA) data, SetMIR outperforms four learned multi-interest retrievers on every metric while issuing 33% fewer ANN queries per request. Deployed as a new retrieval source in the DPA production stack, SetMIR lifts overall CVR by 3.1%, while lifting CTR by 44% and CVR by 51% over the item-to-item retrieval source with the same item embeddings, ANN index, and retrieval quota.

cs.IR↗

arXiv2026

CAMIE: Co-Engagement-Aware Multimodal Item Embeddings for Snap Dynamic Product Ads Retrieval

Item-to-item (I2I) retrieval is a core primitive in large-scale recommendation and advertising systems. In production Snap Dynamic Product Ads (DPA), I2I retrieval faces two challenges: separate visual, textual, and multimodal encoders fragment the retrieval stack, and content-only training does not align embeddings with the co-engagement behavior that drives downstream conversions. We present CAMIE, a co-engagement-aware multimodal item embedding framework for Snap DPA retrieval. CAMIE builds on LLM/MLLM backbones, using their native multimodal interfaces to represent item images and metadata in a shared embedding space. It then fine-tunes the backbone on co-engaged item pairs mined from user journeys with a symmetric in-batch InfoNCE objective. Offline, CAMIE outperforms the strongest commercial multimodal embedding model on Recall@10 and serves text-only retrieval from the same checkpoint with minimal quality loss. Online, CAMIE serves as a drop-in replacement for two deployed content-based I2I encoders, delivering +0.390% CTR / +10.832% CVR over the multimodal control, +18.958% CTR / +13.12% CVR over the text control, and +0.211% CTR / +1.911% CVR on overall DPA traffic. CAMIE is deployed in production.

cs.IR↗

arXiv2026

Two-loop QCD corrections to $CP$-even Higgs boson decays into $Vγ$ in the Type-I Two-Higgs-Doublet Model

We investigate the QCD corrections to the loop-induced decays of the heavy $CP$-even Higgs boson, $H \to Vγ$ ($V = Z, γ$), within the framework of the Type-I Two-Higgs-Doublet Model (THDM). Owing to the similarity of the underlying loop topologies, the two decay channels exhibit closely correlated behaviour. After imposing relevant phenomenological constraints, we evaluate the decay widths for 5000 viable parameter points at next-to-leading order (NLO) in QCD under the alignment limit. The $H\toγγ$ width exceeds that of $H\to Zγ$ by roughly a factor of four. Both are dominated by the top-quark loop: the $W$ contribution vanishes in the alignment limit, and the charged-Higgs loop is suppressed throughout most of the viable parameter region. The corrections exhibit a pronounced dependence on the heavy Higgs boson mass $m_H$, attaining a maximum in the vicinity of the $t\bar{t}$ production threshold. To elucidate the individual parameter dependences, dedicated benchmark scenarios are analysed, revealing that the decay widths diminish monotonically with increasing $\tanβ$ while growing with $m_H$. The QCD corrections for both decay modes typically span approximately $-20\%$ to $+20\%$, with larger corrections in the non-alignment scenario: in the $H\toγγ$ channel they reach up to $+38\%$ at large $\tanβ$, and in the $H\to Zγ$ channel they cross zero to become positive. The $CP$ selection rule forces the $t\bar{t}$ pair into a $P$-wave configuration at threshold, which strongly suppresses the Coulomb corrections and secures the perturbative stability of the fixed-order prediction. A comparison with ATLAS limits shows that current data do not yet constrain the parameter space, whereas the $\mathcal{O}(15\%)$ NLO corrections may become relevant for interpreting exclusion bounds at the HL-LHC.

hep-ph↗

arXiv2026

MemeBridge: A Dataset for Benchmarking and Mitigating the Bidirectional Cultural Gap in Meme Interpretation

Communicating across cultures is inherently challenging, especially through culturally dense and ambiguous formats like memes. While people expect large language models (LLMs) to hold promise for bridging such gaps, existing benchmark datasets often fail to capture the cultural context necessary for accurate interpretation. To address this, we introduce MemeBridge, a curated dataset centered on U.S.-originated memes, designed to capture two complementary perspectives: (1) how Chinese participants interpret these memes, and (2) how U.S. participants anticipate how people from other cultures might misunderstand them. Here, context refers to implicit cultural knowledge, including background beliefs, norms, and shared assumptions that shape meme comprehension. The dataset was constructed via a multi-stage crowdsourcing pipeline with rigorous validation, including human agreement checks and GPT-based classification verification. Each meme is annotated with sentiment, emotion, cultural significance, and knowledge type, providing rich supervision for downstream tasks. Notably, we observe that the anticipated misunderstandings from U.S. participants are often inaccurate, highlighting the asymmetries in cultural understanding and the challenges of adopting perspectives beyond one's own. This bidirectional framing, which focuses on both expression and perception, enables more nuanced benchmarking of cross-cultural comprehension. Our probing of multiple LLMs reveals that while models developed in different cultural contexts exhibit partial cross-cultural understanding, they often struggle with sophisticated interpretations. By contrast, fine-tuning with MemeBridge improves model performance, underscoring the value of culturally grounded resources for training and evaluating LLMs in globally diverse settings.

cs.CL↗

arXiv2026

Low-energy Muon-Nucleon scattering experiment: LUNE (White Paper)

The HIAF will provide high-intensity, high-quality muon beams with momenta from 0.5 to 7.5 GeV/c. This energy range is uniquely suited for precision muon scattering, bridging the gap between low-energy electron facilities and future high-energy lepton-ion colliders. In particular, HIAF will enable precision measurements with both positive and negative muon beams over a broad kinematic range, complementing existing electron-scattering facilities such as JLab, EicC and EIC. Based on HIAF muon source, the LUNE Collaboration has been established to address several fundamental questions in nuclear and particle physics, including the proton charge radius puzzle, nucleon electromagnetic structure, and the dynamics of quantum electrodynamics and hadronic interactions. The program proceeds in two phases, from elastic scattering to nucleon structure and beyond-Standard-Model searches. The experiment is expected to determine the proton charge radius with a precision of approximately 1.0\% using elastic muon-proton scattering. It will also perform systematic measurements of the proton electromagnetic form factors with both $μ^+$ and $μ^-$ beams, enabling precise studies of two-photon exchange effects and stringent tests of quantum electrodynamics. Beyond elastic scattering, LUNE will investigate TMD, gravitational form factors, and nuclear charge radii, providing new insights into the 3D structure of nucleons and nuclei. The experiment will further address important topics including Coulomb-distortion corrections, nuclear medium effects, and possible signatures of physics beyond the Standard Model. This white paper presents the scientific motivation, detector concept, expected performance, and long-term strategy of LUNE.

hep-ex↗

arXiv2026

PCBnet: A Dataset and Automatic Construction of SPICE Netlists from Schematic Images

Printed circuit boards (PCBs) are fundamental to modern electronic systems, yet AI-driven PCB design automation remains constrained by the lack of large-scale paired schematic-netlist datasets. PCB schematics are particularly challenging due to diverse component types, complex wiring topologies, and noisy textual annotations. To address this gap, we present PCBnet, a large-scale PCB schematic dataset comprising over 300 real-world designs with annotated pins and paired SPICE netlists. It contains more than 50,000 component instances, 150,000 wires, 100,000 text regions, and 400,000 characters. We further develop an automated schematic-to-netlist pipeline that combines visual recognition, topology construction, and domain-knowledge-guided multi-agent correction. The proposed method achieves 94.54% component detection mAP, 98.57% text recognition accuracy, and 84.47% end-to-end connectivity accuracy. PCBnet provides a benchmark and data foundation for future AI-driven PCB design automation.

cs.CV↗