arXiv subjects
Publications and source records attributed to Yu Liu.
This paper is a follow-up work about the artificial ecosystem model: number soup (Liu and Sumpter, J. Royal Soc. Interface, 2017). It elaborates more details about this model and points out future directions.
Kerker preconditioner, based on the dielectric function of homogeneous electron gas, is designed to accelerate the self-consistent field (SCF) iteration in the density functional theory (DFT) calculations. However, question still remains regarding its applicability to the inhomogeneous systems. In this paper, we develop a modified Kerker preconditioning scheme which captures the long-range screening behavior of inhomogeneous systems thus improve the SCF convergence. The effectiveness and efficiency is shown by the tests on long-z slabs of metals, insulators and metal-insulator contacts. For situations without a priori knowledge of the system, we design the a posteriori indicator to monitor if the preconditioner has suppressed charge sloshing during the iterations. Based on the a posteriori indicator, we demonstrate two schemes of the self-adaptive configuration for the SCF iteration.
Using high temporal and high spatial resolution observations taken by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory, we present the detailed observational analysis of a high quality quasi-periodic fast- propagating (QFP) magnetosonic wave that was associated with the eruption of a magnetic flux rope and a GOES C5.0 flare. For the first time, we find that the QFP wave lasted during the entire flare lifetime rather than only the rising phase of the accompanying flare as reported in previous studies. In addition, the propagation of the different parts of the wave train showed different kinematics and morphologies. For the southern (northern) part, the speed, duration, intensity variation are about 875 +/- 29 (1485 +/- 233) km/s, 45 (60) minutes, and 4% (2%), and the pronounced periods of them are 106 +/- 12 and 160 +/- 18 (75 +/- 10 and 120 +/- 16) seconds, respectively. It is interesting that the northern part of the wave train showed obvious refraction effect when they pass through a region of strong magnetic field. Periodicity analysis result indicates that all the periods of the QFP wave can be found in the period spectrum of the accompanying flare, suggesting their common physical origin. We propose that the quasi-periodic nonlinear magnetohydrodynamics process in the magnetic reconnection that produces the accompanying flare should be important for exciting of QFP wave, and the different magnetic distribution along different paths can account for the different speeds and morphology evolution of the wave fronts.
One of the major restrictions on the performance of video-based person re-id is partial noise caused by occlusion, blur and illumination. Since different spatial regions of a single frame have various quality, and the quality of the same region also varies across frames in a tracklet, a good way to address the problem is to effectively aggregate complementary information from all frames in a sequence, using better regions from other frames to compensate the influence of an image region with poor quality. To achieve this, we propose a novel Region-based Quality Estimation Network (RQEN), in which an ingenious training mechanism enables the effective learning to extract the complementary region-based information between different frames. Compared with other feature extraction methods, we achieved comparable results of 92.4%, 76.1% and 77.83% on the PRID 2011, iLIDS-VID and MARS, respectively. In addition, to alleviate the lack of clean large-scale person re-id datasets for the community, this paper also contributes a new high-quality dataset, named "Labeled Pedestrian in the Wild (LPW)" which contains 7,694 tracklets with over 590,000 images. Despite its relatively large scale, the annotations also possess high cleanliness. Moreover, it's more challenging in the following aspects: the age of characters varies from childhood to elderhood; the postures of people are diverse, including running and cycling in addition to the normal walking state.
Beam structure is one of the most widely used structures in mechanical engineering and civil engineering. Ultrasonic guided wave based crack identification is one of the most important and accepted approaches applied to detect unseen small flaws in structures. Numerical simulations of ultrasonic guided wave propagation have caught more and more attention due to the fast development of hardware and software in the last few years. From all the numerical simulation methods, wavelet based finite element method has been proved to be one of the most efficient methods due to its better spatial resolution, which means it needs fewer elements to get the same accuracy and it can improve the calculation cost significantly. However, it needs a very small time interval. Laplace transform can easily convert the time domain into a frequency domain and then revert it back to a time domain. Laplace transform has thus the advantage of finding better results with a very large time interval. which can save a lot of time cost. This paper will present an innovative method combining Laplace transform and the B-spline wavelet on interval (BSWI) finite element method. This novel method allows to get results with the same accuracy and with a significantly lower time cost, which would not only decrease the total number of elements in the structure but also increase the time integration interval. The numerical Laplace transform and BSWI finite element will be introduced. Moreover, this innovative method is applied to simulate the ultrasonic wave propagation in a beam structure in different materials. Numerical examples for crack identification in beam structures have been studied for verification.
To keep pace with the rapid growth of mobile traffic demands, dense deployment of small cells in millimeter wave (mmWave) bands has become a promising candidate for next generation wireless communication systems. With a greatly increased data rate from huge bandwidth of mmWave communications, energy consumption should be mitigated for higher energy efficiency. Due to content popularity, many content-based mobile applications can be supported by the multicast service. mmWave communications exploit directional antennas to overcome high path loss, and concurrent transmissions can be enabled for better multicast service. On the other hand, device-to-device (D2D) communications in physical proximity should be exploited to improve multicast performance. In this paper, we propose an energy efficient multicast scheduling scheme, referred to as EMS, which utilizes both D2D communications and concurrent transmissions to achieve high energy efficiency. In EMS, a D2D path planning algorithm establishes multi-hop D2D transmission paths, and a concurrent scheduling algorithm allocates the links on the D2D paths into different pairings. Then the transmission power of links is adjusted by the power control algorithm. Furthermore, we theoretically analyze the roles of D2D communications and concurrent transmissions in reducing energy consumption. Extensive simulations under various system parameters demonstrate the superior performance of EMS in terms of energy consumption compared with the state-of-the-art schemes. Furthermore, we also investigate the choice of the interference threshold to optimize network performance.
We have studied the one-dimensional $p$-wave periodic Anderson model at finite temperature with the help of the numerically exact determinant quantum Monte Carlo simulation. It is found that the topological Haldane phase established for ground-state is still stable against small thermal fluctuation and its characteristic edge magnetization develops at low temperature. Moreover, the saturated low-$T$ spin structure factor and the $\frac{1}{T}$-law of susceptibility are useful to detect the free edge spin moment, which may be relevant for experimental explorations. We have also comparatively studied the conventional $s$-wave periodic Anderson model, which helps us identify an emergent energy scale $T_{cr}$. $T_{cr}$ signals a crossover into interesting low-$T$ regime and seems to be the expected Ruderman-Kittel-Kasuya-Yosida (RKKY) coupling. Finally, the collective Kondo screening effect has been examined and it is heavily reduced at boundary, which may give a fruitful playground for novel physics beyond the well-established Haldane state and topological band insulators.
Numerical simulation of ultrasonic wave propagation provides an efficient tool for crack identification in structures, while it requires a high resolution and expensive time calculation cost in both time integration and spatial discretization. Wavelet finite element model provides a highorder finite element model and gives a higher accuracy on spatial discretization, B-Spline wavelet interval (BSWI) has been proved to be one of the most commonly used wavelet finite element model with the advantage of getting the same accuracy but with fewer element so that the calculation cost is much lower than traditional finite element method and other high-order element methods. Precise Integration Method provides a higher resolution in time integration and has been proved to be a stable time integration method with a much lower cut-off error for same and even smaller time step. In this paper, a wavelet finite element model combined with precise integration method is presented for the numerical simulation of ultrasonic wave propagation and crack identification in 1D structures. Firstly, the wavelet finite element based on BSWI is constructed for rod and beam structures. Then Precise Integrated Method is introduced with application for the wave propagation in 1D structures. Finally, numerical examples of ultrasonic wave propagation in rod and beam structures are conducted for verification. Moreover, crack identification in both rod and beam structures are studied based on the new model.
The Baryon Acoustic Oscillations (BAO) refer to the ripples of material density in the Universe. As the most direct density tracers in the universe, galaxies have been commonly used in studies of BAO peak detection. The spatial number density of galaxies, to a certain extent, reflects the distribution of the material density of our Universe. Using galaxies as matter tracers, we can construct more overlapping empty spheres (DT voids) than the matter tracers, via Delaunay Triangulation technique. We show that their radii excellently reflect the galaxy number density round them, and they can serve as reliable different density region tracers. Using the data from an unprecedented large-scale $N$-body simulation "TianNu", we conduct some fundamental statistical studies and clustering analysis of the DT voids. We discuss in detail the representative features of two-point correlation functions of different DT void populations. We show that the peak, the position of which corresponds to the average radius of data samples, is the most representative feature of the two-point correlation function of the DT voids. In addition, we also construct another voids, the disjoint voids, and investigate their some statistical properties and clustering properties. And we find that the occupied space of all disjoint voids accounts for about $45\%$ of the volume of the simulation box, regardless of the number density of mock galaxies. We also investigate the BAO detections based on different tracers, i.e. mock galaxies, low-density region tracers, and high-density region tracers respectively. Our results show that BAO intensities detected by low/high-density region tracers are enhanced significantly compared to the BAO detection by mock galaxies, for the mock galaxy catalogue with the number density of $7.52\times10^{-5}$ $h^3$ Mpc$^{-3}$.
We present observations of a small-scale Extreme-ultraviolet (EUV) wave that was associated with a mini-filament eruption and a GOES B1.9 micro-fare in the quiet Sun region. The initiation of the event was due to the photospheric magnetic emergence and cancellation in the eruption source region, which first caused the ejection of a small plasma ejecta, then the ejecta impacted on a nearby mini-filament and thereby led to the filament's eruption and the associated fare. During the filament eruption, an EUV wave at a speed of 182 { 317 km/s was formed ahead of an expanding coronal loop, which propagated faster than the expanding loop and showed obvious deceleration and refection during the propagation. In addition, the EUV wave further resulted in the transverse oscillation of a remote filament whose period and damping time are 15 and 60 minutes, respectively. Based on the observational results, we propose that the small-scale EUV wave should be a fast-mode magnetosonic wave that was driven by the the expanding coronal loop. Moreover, with the application of filament seismology, it is estimated that the radial magnetic field strength is about 7 Gauss. The observations also suggest that small-scale EUV waves associated with miniature solar eruptions share similar driving mechanism and observational characteristics with their large-scale counterparts.
Using cosmological $N$-body simulation which coevolves cold dark matter (CDM) and neutrino particles, we discover the local effect of massive neutrinos on the spatial distribution of CDM halos, reflected on properties of the Delaunay Triangulation (DT) voids. Smaller voids are generally in regions with higher neutrino abundance and so their surrounding halos are impacted by a stronger neutrino free streaming. This makes the voids larger (surrounding halos being washed outward the void center). On the contrary, larger voids are generally in regions with lower neutrino abundance and so their surrounding halos are less impacted by neutrino free streaming, making the voids smaller (surrounding halos being squeezed toward the void center). This characteristic change of the spatial distribution of the halos suppresses the 2-point correlation function of halos on scales $\sim$ 1 Mpc$/h$ and significantly skews the number function of the DT voids, which serve as measurable neutrino effects in current or future galaxy surveys.
Feature matters. How to train a deep network to acquire discriminative features across categories and polymerized features within classes has always been at the core of many computer vision tasks, specially for large-scale recognition systems where test identities are unseen during training and the number of classes could be at million scale. In this paper, we address this problem based on the simple intuition that the cosine distance of features in high-dimensional space should be close enough within one class and far away across categories. To this end, we proposed the congenerous cosine (COCO) algorithm to simultaneously optimize the cosine similarity among data. It inherits the softmax property to make inter-class features discriminative as well as shares the idea of class centroid in metric learning. Unlike previous work where the center is a temporal, statistical variable within one mini-batch during training, the formulated centroid is responsible for clustering inner-class features to enforce them polymerized around the network truncus. COCO is bundled with discriminative training and learned end-to-end with stable convergence. Experiments on five benchmarks have been extensively conducted to verify the effectiveness of our approach on both small-scale classification task and large-scale human recognition problem.
We conduct an empirical study of machine learning functionalities provided by major cloud service providers, which we call machine learning clouds. Machine learning clouds hold the promise of hiding all the sophistication of running large-scale machine learning: Instead of specifying how to run a machine learning task, users only specify what machine learning task to run and the cloud figures out the rest. Raising the level of abstraction, however, rarely comes free - a performance penalty is possible. How good, then, are current machine learning clouds on real-world machine learning workloads? We study this question with a focus on binary classication problems. We present mlbench, a novel benchmark constructed by harvesting datasets from Kaggle competitions. We then compare the performance of the top winning code available from Kaggle with that of running machine learning clouds from both Azure and Amazon on mlbench. Our comparative study reveals the strength and weakness of existing machine learning clouds and points out potential future directions for improvement.
The electronic and optical properties of a GaAs quantum ring (QR) with few electrons in the presence of the Rashba spin-orbit interaction (RSOI) and the Dresselhaus spin-orbit interaction (DSOI) have been investigated theoretically. Configuration interaction (CI) method is employed to calculate the eigenvalues and eigenstates of the multiple-electron QR accurately. Our numerical results demonstrate that the symmetry breaking induced by the RSOI and DSOI leads to an anisotropic distribution of multi-electron states. The Coulomb interaction offers additional modulation of the electron distribution and thus the optical absorption indices in the quantum rings. By tuning the magnetic/electric fields and/or electron numbers in a quantum ring, one can change its optical property significantly. Our theory provides a new way to control multi-electron states and optical properties of QR by hybrid modulations or by electrical means only.
Magnetism in Weyl semimetals is desired to investigate the interaction between the magnetic moments and Weyl fermions, e.g. to explore anomalous quantum Hall phenomena. Here we demonstrate that proton irradiation is an effective tool to induce ferromagnetism in the Weyl semimetal TaAs. The intrinsic magnetism is observed with a transition temperature above room temperature. The magnetic moments from d states are found to be localized around Ta atoms. Further, the first-principles calculations indicate that the d states localized on the nearest-neighbor Ta atoms of As vacancy sites are responsible for the observed magnetic moments and the long-ranged magnetic order. The results show the feasibility of inducing ferromagnetism in Weyl semimetals so that they may facilitate the applications of this material in spintronics.
In this paper, we discuss the numerical approximation of random periodic solutions (r.p.s.) of stochastic differential equations (SDEs) with multiplicative noise. We prove the existence of the random periodic solution as the limit of the pull-back flow when the starting time tends to $-\infty$ along the multiple integrals of the period. As the random periodic solution is not explicitly constructible, it is useful to study the numerical approximation. We discretise the SDE using the Euler-Maruyama scheme and moldiflied Milstein scheme. Subsequently we obtain the existence of the random periodic solution as the limit of the pull-back of the discretised SDE. We prove that the latter is an approximated random periodic solution with an error to the exact one at the rate of $\sqrt {Δt}$ in the mean-square sense in Euler-Maruyama method and $Δt$ in the Milstein method. We also obtain the weak convergence result for the approximation of the periodic measure.
A basic principle in crystal structure determination is that there should be proper distances between adjacent atoms. Therefore, detection of atom bumping is of fundamental significance in structure determination, especially in the direct space method where crystallographic models are just randomly generated. Presented in this article is an algorithm that detects atom bonding in a unit cell based on the sweep and prune algorithm of axis-aligned bounding boxes (AABBs) and running in $O(n \log n)$ time bound, where $n$ is the total number of atoms in the unit cell. This algorithm only needs the positions of individual atoms in the unit cell and does not require any prior knowledge of existing bonds, and is thus suitable for modelling of inorganic crystals where the bonding relations are often unknown a priori. With this algorithm, computation routines requiring bonding information, eg. anti-bumping and computation of coordination numbers and valences, can be performed efficiently. As an example application, an evaluation function for atom bumping is proposed, which can be used for real-time elimination of crystallographic models with unreasonably short bonds during the procedure of global optimisation in the direct space method.
Fast radio bursts are radio transients observed mainly around 1.5 GHz. Their peak frequency decreases at a rate of 100 ~ 500 MHz/s and some of them have a broader pulse with an exponentially decaying tail. Common assumptions for fast radio bursts include a dispersion effect resulting in the peak frequency drifting and a scattering effect resulting in pulse broadening. These assumptions attribute the abnormally large dispersion measure and scattering measure to the environmental medium of the host galaxy. Here we show that the radiation of fast radio bursts can be explained as an undulator radiation and the large dispersion measure can be due to a motion effect mainly from the rotation of the source which is probably variable stars. In our scenario, the pulse broadening is near-field effects and the pulse itself represents a Fresnel diffraction pattern sweeping the observer. Our work is the first analysis of properties of fast radio bursts in the context of a special mechanism of the radiation instead of a special propagation environment of the radiation.