arXiv subjects

Yu Chen

Publications and source records attributed to Yu Chen.

At least 505 records · Page 28Linked to original sources

arXiv2020

Optical System Design of Bionic Compound Eye with Broad Field of View

In nature, many common insects have compound eyes composed of many small eyes arranged on a curved retina. This kind of vision systems have many advantages, such as small size, large FOV (field of view) and high sensitivity, which have attracted extensive attention and research from world-wide researchers. It has good application prospects in military strikes and mechanical vision. In this paper, a new type of miniature compound eye system with large FOV is designed, which contains a micro-lens array and a relay system. Hexagonal micro-lens array are spliced seamlessly as a curved shell in the designed compound eye system. The intermediate curved image formed by the curved array is converted to a planar image by introducing a relay system. After combination and optimization of the micro-lens array and the relay system, the MTF values at 89.3lp/mm for each FOV within 120.5° are greater than 0.3, and the corresponding RMS spot radii less than the radius of the Airy disk, which proves the good imaging quality for the compound eye. The clear aperture of a single micro lens is 250μm with FOV 6°. After tolerance analysis, the results show the image quality still holds good enough performance and meets the requirements of the additive manufacturing process.

physics.optics↗

arXiv2020

Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO

The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment.

hep-ex↗

arXiv2020

Sublinear Algorithms and Lower Bounds for Metric TSP Cost Estimation

We consider the problem of designing sublinear time algorithms for estimating the cost of a minimum metric traveling salesman (TSP) tour. Specifically, given access to a $n \times n$ distance matrix $D$ that specifies pairwise distances between $n$ points, the goal is to estimate the TSP cost by performing only sublinear (in the size of $D$) queries. For the closely related problem of estimating the weight of a metric minimum spanning tree (MST), it is known that for any $\varepsilon > 0$, there exists an $\tilde{O}(n/\varepsilon^{O(1)})$ time algorithm that returns a $(1 + \varepsilon)$-approximate estimate of the MST cost. This result immediately implies an $\tilde{O}(n/\varepsilon^{O(1)})$ time algorithm to estimate the TSP cost to within a $(2 + \varepsilon)$ factor for any $\varepsilon > 0$. However, no $o(n^2)$ time algorithms are known to approximate metric TSP to a factor that is strictly better than $2$. On the other hand, there were also no known barriers that rule out the existence of $(1 + \varepsilon)$-approximate estimation algorithms for metric TSP with $\tilde{O}(n)$ time for any fixed $\varepsilon > 0$. In this paper, we make progress on both algorithms and lower bounds for estimating metric TSP cost. We also show that the problem of estimating metric TSP cost is closely connected to the problem of estimating the size of a maximum matching in a graph.

cs.DS↗

arXiv2020

Near-Perfect Recovery in the One-Dimensional Latent Space Model

Suppose a graph $G$ is stochastically created by uniformly sampling vertices along a line segment and connecting each pair of vertices with a probability that is a known decreasing function of their distance. We ask if it is possible to reconstruct the actual positions of the vertices in $G$ by only observing the generated unlabeled graph. We study this question for two natural edge probability functions -- one where the probability of an edge decays exponentially with the distance and another where this probability decays only linearly. We initiate our study with the weaker goal of recovering only the order in which vertices appear on the line segment. For a segment of length $n$ and a precision parameter $δ$, we show that for both exponential and linear decay edge probability functions, there is an efficient algorithm that correctly recovers (up to reflection symmetry) the order of all vertices that are at least $δ$ apart, using only $\tilde{O}(\frac{n}{δ^ 2})$ samples (vertices). Building on this result, we then show that $O(\frac{n^2 \log n}{δ^2})$ vertices (samples) are sufficient to additionally recover the location of each vertex on the line to within a precision of $δ$. We complement this result with an $Ω(\frac{n^{1.5}}δ)$ lower bound on samples needed for reconstructing positions (even by a computationally unbounded algorithm), showing that the task of recovering positions is information-theoretically harder than recovering the order. We give experimental results showing that our algorithm recovers the positions of almost all points with high accuracy.

cs.DS↗

arXiv2020

Graph-Based Parallel Large Scale Structure from Motion

While Structure from Motion (SfM) achieves great success in 3D reconstruction, it still meets challenges on large scale scenes. In this work, large scale SfM is deemed as a graph problem, and we tackle it in a divide-and-conquer manner. Firstly, the images clustering algorithm divides images into clusters with strong connectivity, leading to robust local reconstructions. Then followed with an image expansion step, the connection and completeness of scenes are enhanced by expanding along with a maximum spanning tree. After local reconstructions, we construct a minimum spanning tree (MinST) to find accurate similarity transformations. Then the MinST is transformed into a Minimum Height Tree (MHT) to find a proper anchor node and is further utilized to prevent error accumulation. When evaluated on different kinds of datasets, our approach shows superiority over the state-of-the-art in accuracy and efficiency. Our algorithm is open-sourced at https://github.com/AIBluefisher/GraphSfM.

cs.CV↗

arXiv2020

TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution

The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022.

physics.ins-det↗

arXiv2020

Minor Privacy Protection Through Real-time Video Processing at the Edge

The collection of a lot of personal information about individuals, including the minor members of a family, by closed-circuit television (CCTV) cameras creates a lot of privacy concerns. Particularly, revealing children's identifications or activities may compromise their well-being. In this paper, we investigate lightweight solutions that are affordable to edge surveillance systems, which is made feasible and accurate to identify minors such that appropriate privacy-preserving measures can be applied accordingly. State of the art deep learning architectures are modified and re-purposed in a cascaded fashion to maximize the accuracy of our model. A pipeline extracts faces from the input frames and classifies each one to be of an adult or a child. Over 20,000 labeled sample points are used for classification. We explore the timing and resources needed for such a model to be used in the Edge-Fog architecture at the edge of the network, where we can achieve near real-time performance on the CPU. Quantitative experimental results show the superiority of our proposed model with an accuracy of 92.1% in classification compared to some other face recognition based child detection approaches.

cs.CV↗

arXiv2020

Hybrid Blockchain-Enabled Secure Microservices Fabric for Decentralized Multi-Domain Avionics Systems

Advancement in artificial intelligence (AI) and machine learning (ML), dynamic data driven application systems (DDDAS), and hierarchical cloud-fog-edge computing paradigm provide opportunities for enhancing multi-domain systems performance. As one example that represents multi-domain scenario, a "fly-by-feel" system utilizes DDDAS framework to support autonomous operations and improve maneuverability, safety and fuel efficiency. The DDDAS "fly-by-feel" avionics system can enhance multi-domain coordination to support domain specific operations. However, conventional enabling technologies rely on a centralized manner for data aggregation, sharing and security policy enforcement, and it incurs critical issues related to bottleneck of performance, data provenance and consistency. Inspired by the containerized microservices and blockchain technology, this paper introduces BLEM, a hybrid BLockchain-Enabled secure Microservices fabric to support decentralized, secure and efficient data fusion and multi-domain operations for avionics systems. Leveraging the fine-granularity and loose-coupling features of the microservices architecture, multidomain operations and security functionalities are decoupled into multiple containerized microservices. A hybrid blockchain fabric based on two-level committee consensus protocols is proposed to enable decentralized security architecture and support immutability, auditability and traceability for data provenience in existing multi-domain avionics system. Our evaluation results show the feasibility of the proposed BLEM mechanism to support decentralized security service and guarantee immutability, auditability and traceability for data provenience across domain boundaries.

cs.CR↗

arXiv2020

HODET: Hybrid Object DEtection and Tracking using mmWave Radar and Visual Sensors

Image sensors have been explored heavily in automotive applications for collision avoidance and varying levels of autonomy. It requires a degree of brightness, therefore, the use of an image sensor in nighttime operation or dark conditions can be problematic along with challenging weather such as fog. Radar sensors have been employed to help cover the various environmental challenges with visible spectrum cameras. Edge computing technology has the potential to address a number of issues such as real-time processing requirements, off-loading of processing from congested servers, and size, weight, power, and cost (SWaP-C) constraints. This paper proposes a novel Hybrid Object DEtection and Tracking (HODET) using mmWave Radar and Visual Sensors at the edge. The HODET is a computing application of low SWaP-C electronics performing object detection, tracking and identification algorithms with the simultaneous use of image and radar sensors. While the machine vision camera alone could estimate the distance of an object, the radar sensor will provide an accurate distance and vector of movement. This additional data accuracy can be leveraged to further discriminate a detected object to protect against spoofing attacks. A real-world smart community public safety monitoring scenario is selected to verify the effectiveness of HODET, which detects, tracks objects of interests and identify suspicious activities. The experimental results demonstrate the feasibility of the approach.

cs.DC↗

arXiv2020

Enabling Continuous Operations for UAVs with an Autonomous Service Network Infrastructure

One of the major restrictions on the practical applications of unmanned aerial vehicles (UAV) is their incomplete self-sufficiency, which makes continuous operations infeasible without human oversights. The more oversight UAVs require, the less likely they are going to be commercially advantageous when compared to their alternatives. As an autonomous system, how much human interaction is needed to function is one of the best indicators evaluating the limitations and inefficiencies of the UAVs. Popular UAV related research areas, such as path planning and computer vision, have enabled substantial advances in the ability of drones to act on their own. This research is dedicated to in-flight operations, in which there is not much reported effort to tackle the problem from the aspect of the supportive infrastructure. In this paper, an Autonomous Service network infrastructure (AutoServe) is proposed. Aiming at increasing the future autonomy of UAVs, the AutoServe system includes a service-oriented landing platform and a customized communication protocol. This supportive AutoServe infrastructure will autonomize many tasks currently done manually by human operators, such as battery replacement. A proof-of-concept prototype has been built and the simulation experimental study validated the design.

cs.NI↗

arXiv2020

Automatic, Dynamic, and Nearly Optimal Learning Rate Specification by Local Quadratic Approximation

In deep learning tasks, the learning rate determines the update step size in each iteration, which plays a critical role in gradient-based optimization. However, the determination of the appropriate learning rate in practice typically replies on subjective judgement. In this work, we propose a novel optimization method based on local quadratic approximation (LQA). In each update step, given the gradient direction, we locally approximate the loss function by a standard quadratic function of the learning rate. Then, we propose an approximation step to obtain a nearly optimal learning rate in a computationally efficient way. The proposed LQA method has three important features. First, the learning rate is automatically determined in each update step. Second, it is dynamically adjusted according to the current loss function value and the parameter estimates. Third, with the gradient direction fixed, the proposed method leads to nearly the greatest reduction in terms of the loss function. Extensive experiments have been conducted to prove the strengths of the proposed LQA method.

stat.ML↗

arXiv2020

An Experimental Study on Microservices based Edge Computing Platforms

The rapid technological advances in the Internet of Things (IoT) allows the blueprint of Smart Cities to become feasible by integrating heterogeneous cloud/fog/edge computing paradigms to collaboratively provide variant smart services in our cities and communities. Thanks to attractive features like fine granularity and loose coupling, the microservices architecture has been proposed to provide scalable and extensible services in large scale distributed IoT systems. Recent studies have evaluated and analyzed the performance interference between microservices based on scenarios on the cloud computing environment. However, they are not holistic for IoT applications given the restriction of the edge device like computation consumption and network capacity. This paper investigates multiple microservice deployment policies on the edge computing platform. The microservices are developed as docker containers, and comprehensive experimental results demonstrate the performance and interference of microservices running on benchmark scenarios.

cs.DC↗

arXiv2020

Position reconstruction using photon timing for the DEAP-3600 dark matter experiment

DEAP-3600 is a single-phase liquid argon dark matter detector being operated 2 km underground at SNOLAB, Sudbury, Canada. The detector consists of 3.3 tonnes of ultra-pure liquid argon in a spherical acrylic cryostat instrumented with 255 photomultiplier tubes. Natural radioactive contamination in the acrylic vessel or TPB wavelength shifter can alpha-decay. Reconstruction of the position of the interactions taking place in the detector uses information about the number of photoelectrons detected in each PMT and when they were detected. Including this information in our suite of cuts allows us to identify and remove almost all surface background events. A method of event position reconstruction emphasizing photon timing is presented here.

physics.ins-det↗

arXiv2020

Fluctuation-enhanced quantum metrology

The main obstacle for practical quantum technology is the noise, which can induce the decoherence and destroy the potential quantum advantages. The fluctuation of a field, which induces the dephasing of the system, is one of the most common noises and widely regarded as detrimental to quantum technologies. Here we show, contrary to the conventional belief, the fluctuation can be used to improve the precision limits in quantum metrology for the estimation of various parameters. Specifically, we show that for the estimation of the direction and rotating frequency of a field, the achieved precisions at the presence of the fluctuation can even surpass the highest precision achievable under the unitary dynamics which have been widely taken as the ultimate limit. We provide explicit protocols, which employs the adaptive quantum error correction, to achieve the higher precision limits with the fluctuating fields. Our study provides a completely new perspective on the role of the noises in quantum metrology. It also opens the door for higher precisions beyond the limit that has been believed to be ultimate.

quant-ph↗

arXiv2020

Effects of Radial Distances on Small-scale Magnetic Flux Ropes in the Solar Wind

Small-scale magnetic flux ropes (SFRs), in the solar wind, have been studied for decades. Statistical analysis utilizing various in situ spacecraft measurements is the main observational approach which helps investigate the generation and evolution of these small-scale structures. Based on the Grad-Shafranov (GS) reconstruction technique, we use the automated detection algorithm to build the databases of these small-scale structures via various spacecraft measurements at different heliocentric distances. We present the SFR properties including the magnetic field and plasma parameters at different radial distances from the sun near the ecliptic plane. It is found that the event occurrence rate is still in the order of a few hundreds per month, the duration and scale size distributions follow power laws, and the flux rope axis orientations are approximately centered around the local Parker spiral directions. In general, most SFR properties exhibit radial decays. In addition, with various databases established, we derive scaling laws for the changes of average field magnitude, event counts, and SFR scale sizes, with respect to the radial distances, ranging from $\sim$ 0.3 au for Helios to $\sim$ 7 au for the Voyager spacecraft. The implications of our results for comparisons with the relevant theoretical works and for the application to the Parker Solar Probe (PSP) mission are discussed.

physics.space-ph↗

arXiv2020

I-ViSE: Interactive Video Surveillance as an Edge Service using Unsupervised Feature Queries

Situation AWareness (SAW) is essential for many mission critical applications. However, SAW is very challenging when trying to immediately identify objects of interest or zoom in on suspicious activities from thousands of video frames. This work aims at developing a queryable system to instantly select interesting content. While face recognition technology is mature, in many scenarios like public safety monitoring, the features of objects of interest may be much more complicated than face features. In addition, human operators may not be always able to provide a descriptive, simple, and accurate query. Actually, it is more often that there are only rough, general descriptions of certain suspicious objects or accidents. This paper proposes an Interactive Video Surveillance as an Edge service (I-ViSE) based on unsupervised feature queries. Adopting unsupervised methods that do not reveal any private information, the I-ViSE scheme utilizes general features of a human body and color of clothes. An I-ViSE prototype is built following the edge-fog computing paradigm and the experimental results verified the I-ViSE scheme meets the design goal of scene recognition in less than two seconds.

cs.CV↗

arXiv2020

Deform-GAN:An Unsupervised Learning Model for Deformable Registration

Deformable registration is one of the most challenging task in the field of medical image analysis, especially for the alignment between different sequences and modalities. In this paper, a non-rigid registration method is proposed for 3D medical images leveraging unsupervised learning. To the best of our knowledge, this is the first attempt to introduce gradient loss into deep-learning-based registration. The proposed gradient loss is robust across sequences and modals for large deformation. Besides, adversarial learning approach is used to transfer multi-modal similarity to mono-modal similarity and improve the precision. Neither ground-truth nor manual labeling is required during training. We evaluated our network on a 3D brain registration task comprehensively. The experiments demonstrate that the proposed method can cope with the data which has non-functional intensity relations, noise and blur. Our approach outperforms other methods especially in accuracy and speed.

cs.CV↗

arXiv2020

The Reconstruction and Prediction Algorithm of the Fractional TDD for the Local Outbreak of COVID-19

From late December, 2019, the novel Corona-Virus began to spread in the mainland of China. For predicting the trend of the Corona Virus spread, several time delay dynamic systems (TDD) are proposed. In this paper, we establish a novel fractional time delay dynamic system (FTDD) to describe the local outbreak of COVID-19. The fractional derivative is introduced to account for the sub-diffusion process of the confirmed and cured peoples growth. Based on the public health data by the government, we propose a stable reconstruction algorithm of the coefficients. The reconstructed coefficients are used to predict the trend of the Corona-Virus. The numerical results are in good agreement with the public data.

physics.soc-ph↗