arXiv subjects

Youjia Zhang

Publications and source records attributed to Youjia Zhang.

At least 19 recordsLinked to original sources

arXiv2026

HRoPE: Homography Relative Positional Encoding

Geometric Relative Positional Encoding has become the primary mechanism for injecting spatial inductive biases into multi-view transformers. Existing designs condition attention on camera-level frustums or ray-marched depth, associating cross-view tokens through the sensor geometry. Such sensor-centric formulations, however, describe only where a token is observed from, leaving the rich surface geometry of the scene region depicted by the token. In this paper, we advocate a shift toward surface-aware positional encoding that explicitly grounds patch tokens in the geometry of physical surfaces. We introduce HRoPE, which represents the local geometry of each patch as a slanted 3D plane, following the slanted support-window assumption of classical multi-view stereo. We inject token-level, plane-induced homographies into attention as relative transformations. This equips the transformer with a geometric prior for rectifying perspective distortions and aligning patch features across viewpoints. Our encoding requires no ground-truth geometry: the plane parameters can be predicted end-to-end under a view-synthesis objective alone, or derived from foundation models. Extensive experiments on RealEstate10K, CO3Dv2, and DL3DV show that our best variant of HRoPE consistently outperforms the evaluated geometric positional encodings for novel view synthesis. Extensive ablations and analysis show the effectiveness of the proposed encoding. Please refer to our project page at: https://gaohchen.github.io/HRoPE

cs.CV↗

arXiv2026

Block Recursive Transformers for Structured Parameter Sharing

Recursive Transformers depend not only on how many parameters are shared, but also on how shared parameters are organized across depth. Existing static schemes adopt two extreme reuse topologies: layer-wise repetition, where each layer is reused independently, and global cyclic reuse, where the entire stack is repeatedly applied as a single shared function. We argue that sharing granularity is an important factor in recursive parameter sharing. This study proposes Block Recursive Transformers (BRT), which partition layers into contiguous blocks and recursively reuse each block before moving to the next. This intermediate topology enables local refinement within blocks while preserving depth-wise transitions, without adding routing modules, auxiliary states, or extra training objectives. Across decoder-only models up to 1.7B parameters, with additional encoder-decoder and encoder-only studies, BRT improves validation negative log-likelihood and downstream accuracy over static recursive sharing baselines. Ablations and representation analyses further show that intermediate block granularity better balances local refinement and depth-wise differentiation. Project website: https://aim-skku.github.io/BRT/

cs.LG↗

arXiv2026

MeshOctave: Vertex Split-and-Rewire Cascades for Native Mesh Generation

Generating compact, artist-style meshes with explicit topology typically relies on autoregressive models which incur prohibitive sequential per-token costs, or continuous flow models that depend on heuristic connectivity decoders. Next-scale generation paradigms offer a compelling alternative by enabling parallel intra-scale token prediction and coarse-to-fine refinement from global structure to local topology; yet, existing methods derive hierarchical scales via progressive mesh simplification and invert them sequentially. This eliminates intra-scale parallelism and scales generation steps linearly with face count. In this paper, we propose MeshOctave, which instead defines scale through dyadic spatial grid resolutions, framing coarsening as a deterministic collapse that merges vertices sharing a voxel cell and inherits connectivity. Its inverse operation, split-and-rewire, determines which octant sub-vertices are instantiated for each coarse face and resolves local connectivity using discrete structural tokens. These per-face operations require no serialization, each scale transition is modeled as an unordered set that adds one bit of coordinate precision, naturally supporting dynamic-length meshes and adaptive resolution refinement. We construct a scale-conditioned masked-uniform discrete diffusion model to learn split-and-rewire operation from resolution collapse hierarchies. MeshOctave outperforms strong baselines in geometric fidelity and topological validity by a non-trivial margin, while supporting adaptive resolution refinement and extending naturally to mesh subdivision tasks.

cs.CV↗

arXiv2026

Not Every Correction Helps: Gain-Guided Continual Test-Time Adaptation

Continual test-time adaptation (CTTA) adapts a source model to an unlabeled test stream whose distribution may change over time. Existing TTA methods often assess prediction reliability using confidence or entropy, which primarily reflect the model's self-certainty for the current sample. In CTTA, accumulated target observations can provide complementary evidence for correcting the source prediction, but this history may become misaligned as the target distribution changes. The key question is therefore not how much the correction differs from the source prediction, but whether and how strongly it should be applied. This paper proposes Gain-Aware INtervention (GAIN), a backpropagation-free CTTA framework guided by a simple principle: history proposes, gain decides. GAIN maintains compact target statistics to form a correction proposal and a posterior-predictive evaluator that accounts for estimation uncertainty. The resulting source-relative gain estimates the proposal's benefit and determines a sample-specific intervention strength along a continuous path through efficient one-dimensional optimization. Gain-controlled predictions then update the target statistics online, limiting the propagation of unreliable corrections, all without backpropagation, sample storage, or replay. Across five benchmarks, our method achieves strong predictive performance, with favorable accuracy--calibration--efficiency trade-offs in continual adaptation. On ImageNet-C, for example, GAIN achieves 61.9% accuracy with near-source calibration. It remains stable under diverse and challenging continual shifts while running 15.9x faster than a representative optimization-based CTTA baseline.

cs.CV↗

arXiv2026

MoVT: Video-Augmented Motion Tokenizer for Text-to-Motion Generation

Text-driven 3D human motion generation models face significant challenges in responding to diverse and unconstrained textual prompts, primarily due to the limited availability of 3D motion training data. To address this, we introduce MoVT, a novel framework that effectively leverages the extensive range of human action videos to enhance text-to-motion generation. At the core of our approach is the cross-modal augmented motion tokenizer, which projects discrete 3D motion tokens into the 2D domain. This projection allows us to enrich the motion codebook with complex, real-world motion patterns derived from videos. The enriched discrete tokens are then mapped back to the 3D domain, resulting in aligned 3D and 2D codebooks with an enhanced capacity to represent intricate motions. These enhanced codebooks are integrated into a generative masked transformer, which predicts masked motion token indices in a modality-agnostic manner. This enables the use of text-index pairs, generated from the 2D codebook and annotated motion videos, to further enhance the generator. Extensive empirical evaluations show that MoVT performs favorably against prior state-of-the-art methods across multiple key metrics.

cs.CV↗

arXiv2026

AMD:Anatomical Motion Diffusion with Interpretable Motion Decomposition and Fusion

Generating realistic human motion sequences from text descriptions is a challenging task that requires capturing the rich expressiveness of both natural language and human motion. Recent advances in diffusion models have enabled significant progress in human motion synthesis. However, existing methods struggle to handle text inputs that describe complex or long motions. In this paper, we propose the Adaptable Motion Diffusion (AMD) model, which leverages a Large Language Model (LLM) to parse the input text into a sequence of concise and interpretable anatomical scripts that correspond to the target motion. This process exploits the LLM's ability to provide anatomical guidance for complex motion synthesis. We then devise a two-branch fusion scheme that balances the influence of the input text and the anatomical scripts on the inverse diffusion process, which adaptively ensures the semantic fidelity and diversity of the synthesized motion. Our method can effectively handle texts with complex or long motion descriptions, where existing methods often fail. Experiments on datasets with relatively more complex motions, such as CLCD1 and CLCD2, demonstrate that our AMD significantly outperforms existing state-of-the-art models.

cs.CV↗

arXiv2026

LATO.2: Factorized 3D Mesh Generation with Vertex and Topology Flow

Flow matching over carefully designed latent representations has recently emerged as a powerful paradigm for topology-aware mesh generation. Existing approaches, however, model vertices and connectivity jointly in a joint latent space, entangling continuous vertex geometry with discrete combinatorial structure; this complicates flow learning and manifests as drifting vertices and broken surfaces. We present LATO.2, a factorized flow matching framework that decomposes mesh generation into a vertex flow followed by a connectivity flow conditioned on the realized vertices, with both stages anchored to a shared coarse voxel scaffold. Dedicated VAEs underpin the two stages, recovering vertices at sub-voxel precision and embedding discrete connectivity into a continuous latent space. We demonstrate two advantages unique to this factorization: (i) part-wise generation, in which the scaffold is partitioned and each part synthesized at full latent capacity, yielding substantially higher-resolution meshes than a monolithic latent permits; and (ii) topology-adaptive editing, in which manipulating first-stage vertices induces the corresponding connectivity without re-optimization. Experiments show that LATO.2 surpasses state-of-the-art topology-aware mesh generators in geometric fidelity and connectivity quality.

cs.GR↗

arXiv2026

PRISM: Synergizing Vision Foundation Models via Self-organized Expert Specialization

Unifying the complementary strengths of diverse Vision Foundation Models (VFMs) into a single efficient model is highly desirable but challenged by the negative transfer inherent in monolithic distillation. To address these feature conflicts, we introduce \textbf{PRISM}, a novel dual-stream Mixture-of-Experts (MoE) framework that synergizes VFMs via modular specialization. We propose a two-stage paradigm: (1) expertise deconstruction, where a teacher-conditional router guides experts to specialize in distinct representational subspaces to mitigate interference, followed by (2) dynamic recomposition, where the router learns to assemble these experts into tailored computational pathways for downstream tasks. Experiments on PASCAL-Context and NYUD-v2 show that \textbf{PRISM} establishes a new state of the art, validating that sparse, emergent specialization is a scalable approach for integrating diverse visual knowledge.

cs.CV↗

arXiv2026

Backpropagation-Free Test-Time Adaptation via Probabilistic Gaussian Alignment

Test-time adaptation (TTA) enhances the zero-shot robustness under distribution shifts by leveraging unlabeled test data during inference. Despite notable advances, several challenges still limit its broader applicability. First, most methods rely on backpropagation or iterative optimization, which limits scalability and hinders real-time deployment. Second, they lack explicit modeling of class-conditional feature distributions. This modeling is crucial for producing reliable decision boundaries and calibrated predictions, but it remains underexplored due to the lack of both source data and supervision at test time. In this paper, we propose ADAPT, an Advanced Distribution-Aware and backPropagation-free Test-time adaptation method. We reframe TTA as a Gaussian probabilistic inference task by modeling class-conditional likelihoods using gradually updated class means and a shared covariance matrix. This enables closed-form, training-free inference. To correct potential likelihood bias, we introduce lightweight regularization guided by CLIP priors and a historical knowledge bank. ADAPT requires no source data, no gradient updates, and no full access to target data, supporting both online and transductive settings. Extensive experiments across diverse benchmarks demonstrate that our method achieves state-of-the-art performance under a wide range of distribution shifts with superior scalability and robustness.

cs.CV↗

arXiv2026

ZOO-Prune: Training-Free Token Pruning via Zeroth-Order Gradient Estimation in Vision-Language Models

Large Vision-Language Models (VLMs) enable strong multimodal reasoning but incur heavy inference costs from redundant visual tokens. Token pruning alleviates this issue, yet existing approaches face limitations. Attention-based methods rely on raw attention scores, which are often unstable across layers and heads and can lead to redundant selections. Diversity-based methods improve robustness by selecting tokens far apart in feature space, but risk dropping regions needed for accurate prediction. We propose ZOO-Prune, a training-free framework built on the intuition that highly sensitive tokens have a stronger influence on the model's output and capture complementary visual cues rather than redundant ones. To achieve this, we estimate token sensitivity using zeroth-order perturbations at the lightweight projection layer. This measures how small random perturbations affect the projected features and enables efficient approximation of each token's influence without backpropagation. Extensive experiments across multiple VLMs and benchmarks show that ZOO-Prune consistently outperforms prior methods while pruning up to 94.4% of tokens without sacrificing accuracy. Our method also improves efficiency, reaching up to 2.30x faster end-to-end inference compared to the baseline.

cs.CV↗

arXiv2026

LATO: 3D Mesh Flow Matching with Structured TOpology Preserving LAtents

In this paper, we introduce LATO, a novel topology-preserving latent representation that enables scalable, flow matching-based synthesis of explicit 3D meshes. LATO represents a mesh as a Vertex Displacement Field (VDF) anchored on surface, incorporating a sparse voxel Variational Autoencoder (VAE) to compress this explicit signal into a structured, topology-aware voxel latent. To decapsulate the mesh, the VAE decoder progressively subdivides and prunes latent voxels to instantiate precise vertex locations. In the end, a dedicated connection head queries the voxel latent to predict edge connectivity between vertex pairs directly, allowing mesh topology to be recovered without isosurface extraction or heuristic meshing. For generative modeling, LATO adopts a two-stage flow matching process, first synthesizing the structure voxels and subsequently refining the voxel-wise topology features. Compared to prior isosurface/triangle-based diffusion models and autoregressive generation approaches, LATO generates meshes with complex geometry, well-formed topology while being highly efficient in inference.

cs.CV↗

arXiv2026

Motion 3-to-4: 3D Motion Reconstruction for 4D Synthesis

We present Motion 3-to-4, a feed-forward framework for synthesising high-quality 4D dynamic objects from a single monocular video and an optional 3D reference mesh. While recent advances have significantly improved 2D, video, and 3D content generation, 4D synthesis remains difficult due to limited training data and the inherent ambiguity of recovering geometry and motion from a monocular viewpoint. Motion 3-to-4 addresses these challenges by decomposing 4D synthesis into static 3D shape generation and motion reconstruction. Using a canonical reference mesh, our model learns a compact motion latent representation and predicts per-frame vertex trajectories to recover complete, temporally coherent geometry. A scalable frame-wise transformer further enables robustness to varying sequence lengths. Evaluations on both standard benchmarks and a new dataset with accurate ground-truth geometry show that Motion 3-to-4 delivers superior fidelity and spatial consistency compared to prior work. Project page is available at https://motion3-to-4.github.io/.

cs.CV↗

arXiv2025

Jigsaw3D: Disentangled 3D Style Transfer via Patch Shuffling and Masking

Controllable 3D style transfer seeks to restyle a 3D asset so that its textures match a reference image while preserving the integrity and multi-view consistency. The prevalent methods either rely on direct reference style token injection or score-distillation from 2D diffusion models, which incurs heavy per-scene optimization and often entangles style with semantic content. We introduce Jigsaw3D, a multi-view diffusion based pipeline that decouples style from content and enables fast, view-consistent stylization. Our key idea is to leverage the jigsaw operation - spatial shuffling and random masking of reference patches - to suppress object semantics and isolate stylistic statistics (color palettes, strokes, textures). We integrate these style cues into a multi-view diffusion model via reference-to-view cross-attention, producing view-consistent stylized renderings conditioned on the input mesh. The renders are then style-baked onto the surface to yield seamless textures. Across standard 3D stylization benchmarks, Jigsaw3D achieves high style fidelity and multi-view consistency with substantially lower latency, and generalizes to masked partial reference stylization, multi-object scene styling, and tileable texture generation. Project page is available at: https://babahui.github.io/jigsaw3D.github.io/

cs.CV↗

arXiv2025

MCA-RG: Enhancing LLMs with Medical Concept Alignment for Radiology Report Generation

Despite significant advancements in adapting Large Language Models (LLMs) for radiology report generation (RRG), clinical adoption remains challenging due to difficulties in accurately mapping pathological and anatomical features to their corresponding text descriptions. Additionally, semantic agnostic feature extraction further hampers the generation of accurate diagnostic reports. To address these challenges, we introduce Medical Concept Aligned Radiology Report Generation (MCA-RG), a knowledge-driven framework that explicitly aligns visual features with distinct medical concepts to enhance the report generation process. MCA-RG utilizes two curated concept banks: a pathology bank containing lesion-related knowledge, and an anatomy bank with anatomical descriptions. The visual features are aligned with these medical concepts and undergo tailored enhancement. We further propose an anatomy-based contrastive learning procedure to improve the generalization of anatomical features, coupled with a matching loss for pathological features to prioritize clinically relevant regions. Additionally, a feature gating mechanism is employed to filter out low-quality concept features. Finally, the visual features are corresponding to individual medical concepts, and are leveraged to guide the report generation process. Experiments on two public benchmarks (MIMIC-CXR and CheXpert Plus) demonstrate that MCA-RG achieves superior performance, highlighting its effectiveness in radiology report generation.

cs.CV↗

arXiv2025

CA-Diff: Collaborative Anatomy Diffusion for Brain Tissue Segmentation

Segmentation of brain structures from MRI is crucial for evaluating brain morphology, yet existing CNN and transformer-based methods struggle to delineate complex structures accurately. While current diffusion models have shown promise in image segmentation, they are inadequate when applied directly to brain MRI due to neglecting anatomical information. To address this, we propose Collaborative Anatomy Diffusion (CA-Diff), a framework integrating spatial anatomical features to enhance segmentation accuracy of the diffusion model. Specifically, we introduce distance field as an auxiliary anatomical condition to provide global spatial context, alongside a collaborative diffusion process to model its joint distribution with anatomical structures, enabling effective utilization of anatomical features for segmentation. Furthermore, we introduce a consistency loss to refine relationships between the distance field and anatomical structures and design a time adapted channel attention module to enhance the U-Net feature fusion procedure. Extensive experiments show that CA-Diff outperforms state-of-the-art (SOTA) methods.

eess.IV↗

arXiv2025

Question-Aware Gaussian Experts for Audio-Visual Question Answering

Audio-Visual Question Answering (AVQA) requires not only question-based multimodal reasoning but also precise temporal grounding to capture subtle dynamics for accurate prediction. However, existing methods mainly use question information implicitly, limiting focus on question-specific details. Furthermore, most studies rely on uniform frame sampling, which can miss key question-relevant frames. Although recent Top-K frame selection methods aim to address this, their discrete nature still overlooks fine-grained temporal details. This paper proposes QA-TIGER, a novel framework that explicitly incorporates question information and models continuous temporal dynamics. Our key idea is to use Gaussian-based modeling to adaptively focus on both consecutive and non-consecutive frames based on the question, while explicitly injecting question information and applying progressive refinement. We leverage a Mixture of Experts (MoE) to flexibly implement multiple Gaussian models, activating temporal experts specifically tailored to the question. Extensive experiments on multiple AVQA benchmarks show that QA-TIGER consistently achieves state-of-the-art performance. Code is available at https://aim-skku.github.io/QA-TIGER/

cs.CV↗

arXiv2025

RA-Touch: Retrieval-Augmented Touch Understanding with Enriched Visual Data

Visuo-tactile perception aims to understand an object's tactile properties, such as texture, softness, and rigidity. However, the field remains underexplored because collecting tactile data is costly and labor-intensive. We observe that visually distinct objects can exhibit similar surface textures or material properties. For example, a leather sofa and a leather jacket have different appearances but share similar tactile properties. This implies that tactile understanding can be guided by material cues in visual data, even without direct tactile supervision. In this paper, we introduce RA-Touch, a retrieval-augmented framework that improves visuo-tactile perception by leveraging visual data enriched with tactile semantics. We carefully recaption a large-scale visual dataset with tactile-focused descriptions, enabling the model to access tactile semantics typically absent from conventional visual datasets. A key challenge remains in effectively utilizing these tactile-aware external descriptions. RA-Touch addresses this by retrieving visual-textual representations aligned with tactile inputs and integrating them to focus on relevant textural and material properties. By outperforming prior methods on the TVL benchmark, our method demonstrates the potential of retrieval-based visual reuse for tactile understanding. Code is available at https://aim-skku.github.io/RA-Touch

cs.CV↗

arXiv2025

Optimized View and Geometry Distillation from Multi-view Diffuser

Generating multi-view images from a single input view using image-conditioned diffusion models is a recent advancement and has shown considerable potential. However, issues such as the lack of consistency in synthesized views and over-smoothing in extracted geometry persist. Previous methods integrate multi-view consistency modules or impose additional supervisory to enhance view consistency while compromising on the flexibility of camera positioning and limiting the versatility of view synthesis. In this study, we consider the radiance field optimized during geometry extraction as a more rigid consistency prior, compared to volume and ray aggregation used in previous works. We further identify and rectify a critical bias in the traditional radiance field optimization process through score distillation from a multi-view diffuser. We introduce an Unbiased Score Distillation (USD) that utilizes unconditioned noises from a 2D diffusion model, greatly refining the radiance field fidelity. We leverage the rendered views from the optimized radiance field as the basis and develop a two-step specialization process of a 2D diffusion model, which is adept at conducting object-specific denoising and generating high-quality multi-view images. Finally, we recover faithful geometry and texture directly from the refined multi-view images. Empirical evaluations demonstrate that our optimized geometry and view distillation technique generates comparable results to the state-of-the-art models trained on extensive datasets, all while maintaining freedom in camera positioning. Please see our project page at https://youjiazhang.github.io/USD/.

cs.CV↗