arXiv subjects

Yilong Zhou

Publications and source records attributed to Yilong Zhou.

13 recordsLinked to original sources

arXiv2026

Experimental realization of quantum-computing-enhanced sensing

Quantum algorithms offer computational advantages, yet incorporating them into quantum sensing and converting these advantages into enhanced information acquisition remains challenging. Here, we realize quantum-computing-enhanced sensing in a spin-oscillator architecture, where a microwave cavity provides a high-dimensional quantum register and a coupled superconducting qubit serves as the sensor. The unknown signal directly generates the phase oracle operation, establishing a natural physical interface between quantum computation and sensing. We experimentally demonstrate the first Grover search in a bosonic mode and observe quantum amplitude amplification in a Hilbert space spanning more than 128 photons. For the same number of sensing iterations, our protocol extracts more information and resolves more frequency candidates than classical sequential search. Our results establish signal-driven oracles as a route for harnessing oracle-based quantum algorithms and realizing quantum-computing-enhanced sensing.

quant-ph↗

arXiv2026

Quantum Confocal Microscopy in Fock Space with a 19 dB Metrological Gain

Quantum metrology promises measurement precision beyond classical limits by exploiting large-scale quantum states, yet realizing this advantage faces two fundamental challenges: the deterministic preparation of non-trivial quantum probes and the efficient extraction of metrological information in high-dimensional Hilbert spaces. Here, we introduce quantum confocal microscopy in Fock space that simultaneously resolves both challenges. Drawing a direct analogy between classical wave optics and quantum state evolution in a bosonic mode, we construct a confocal system with two Fock-space lenses. The first lens deterministically focuses a coherent state into a quantum probe with a tightly concentrated photon-number distribution, while the second lens maps the metrological information back to the vacuum state for efficient readout. Using a superconducting circuit QED platform, we prepare focused probe states with mean photon numbers up to ${N} = 500$, achieving a 21.5$\pm$1.1 dB compression of the photon-number uncertainty relative to a coherent state, with a scalable quantum circuit of $\mathcal{O}(1)$ operational depth. We demonstrate a displacement sensitivity scaling as $N^{-0.416}$, approaching the Heisenberg scaling ($N^{-0.5}$), and achieve a record metrological gain of 19.06$\pm$0.13 dB beyond the standard quantum limit. This work establishes quantum confocal microscopy as a scalable and practical framework for quantum-enhanced precision measurement, readily extendable to other bosonic platforms and high-dimensional quantum many-body systems.

quant-ph↗

arXiv2026

Deterministic Generation of Arbitrary Fock States via Resonant Subspace Engineering

Deterministic preparation of high-excitation Fock states is a central challenge in bosonic quantum information, with control complexity that generically explodes as the Hilbert space dimension grows. Here we introduce resonant subspace engineering (RSE), a protocol that analytically confines the infinite-dimensional bosonic dynamics to a two-dimensional invariant subspace spanned by an initial coherent state and the target state. State transfer then reduces to a geodesic rotation on a synthetic Bloch sphere, governed by resonance and phase-matching conditions we derive in closed form. For single Fock states, RSE achieves $O(n^{1/4})$ scaling in both evolution time and gate depth, showing a fundamental improvement over existing deterministic schemes. The construction generalizes to $K$-component superpositions via a $(K{+}1)$-dimensional invariant subspace with full $\mathrm{SU}(K{+}1)$ controllability, requiring only 3-5 iterations of operations for superpositions spanning photon numbers 70--100. RSE provides a scalable and analytically transparent framework for large-scale bosonic state engineering and gate synthesis across single- and multimode platforms.

quant-ph↗

arXiv2026

Echoed Random Quantum Metrology

Quantum metrology typically demands the preparation of exotic quantum probe states, such as entangled or squeezed states, to surpass classical limits. However, the need for carefully calibrated system parameters and finely optimized quantum controls imposes limitations on scalability and robustness. Here, we circumvent these limitations by introducing an echoed random process that achieves sensitivity approaching the Heisenberg limit while remaining blind to the random probe state. We demonstrate that by simply driving a Kerr nonlinear mode with random pulses, the emergence of sub-Planck phase-space structures grants high sensitivity, eliminating the need for complex quantum control. The protocol is statistically robust, yielding high performance across broad driving parameter ranges while exhibiting resilience to control fluctuations and photon loss. Broadly applicable to both bosonic and qubit platforms, our work reveals a practical, hardware-efficient, scalable, and optimization-free route to quantum-enhanced metrology in high-dimensional Hilbert spaces.

quant-ph↗

arXiv2026

Principles of Optics in the Fock Space: Scalable Manipulation of Giant Quantum States

The manipulation of distinct degrees of freedom of photons plays a critical role in both classical and quantum information processing. While the principles of wave optics provide elegant and scalable control over classical light in spatial and temporal domains, engineering quantum states in Fock space has been largely restricted to few-photon regimes, hindered by the computational and experimental challenges of large Hilbert spaces. Here, we introduce ``Fock-space optics", establishing a conceptual framework of wave propagation in the quantum domain by treating photon number as a synthetic dimension. Using a superconducting microwave resonator, we experimentally demonstrate Fock-space analogues of optical propagation, refraction, lensing, dispersion, and interference with up to 180 photons. These results establish a fundamental correspondence between Schr\"{o}dinger evolution in a single bosonic mode and classical paraxial wave propagation. By mapping intuitive optical concepts onto high-dimensional quantum state engineering, our work opens a path toward scalable control of large-scale quantum systems with thousands of photons and advanced bosonic information processing.

quant-ph↗

arXiv2026

Scalable Generation of Macroscopic Fock States Exceeding 10,000 Photons

The scalable preparation of bosonic quantum states with macroscopic excitations poses a fundamental challenge in quantum technologies, limited by control complexity and photon-loss rates that severely constrain prior theoretical and experimental efforts to merely dozens of excitations per mode. Here, based on the duality of the quantum state evolution in Fock state space and the optical wave-function propagation in a waveguide array, we introduce a Kerr-engineered multi-lens protocol in a single bosonic mode to deterministically generate Fock states exceeding $10,000$ photons. By optimizing phase and displacement operations across lens groups, our approach compensates for non-paraxial aberrations, achieving fidelities above $73\%$ in numerical simulations for photon numbers up to $N=100,000$. Counterintuitively, the protocol's execution time scales as $N^{-1/2}$ with the target photon number $N$, exhibiting robustness against the photon loss. Our framework enables exploration of quantum-to-classical transitions of giant Fock states, paving the way for advanced quantum metrology with significant quantum gains, and error-corrected quantum information processing in high-dimensional Hilbert spaces.

quant-ph↗

arXiv2025

High-performance quantum interconnect between bosonic modules beyond transmission loss constraints

Distributed quantum computing architectures require high-performance quantum interconnects between quantum information processing units, while previous implementations have been fundamentally limited by transmission line losses. Here, we demonstrate a low-loss interconnect between two superconducting modules using an aluminum coaxial cable, achieving a bus mode quality factor of 1.7e6. By employing SNAIL as couplers, we realize inter-modular state transfer in 0.8 {\mu}s via a three-wave mixing process. The state transfer fidelity reaches 98.2% for quantum states encoded in the first two energy levels, achieving a Bell state fidelity of 92.5%. Furthermore, we show the capability to transfer high-dimensional states by successfully transmitting binomially encoded logical states. Systematic characterization reveals that performance constraints have shifted from transmission line losses (contributing merely 0.2% infidelity) to module-channel interface effects and local Kerr nonlinearities. Our work advances the realization of quantum interconnects approaching fundamental capacity limits, paving the way for scalable distributed quantum computing and efficient quantum communications.

quant-ph↗

arXiv2025

All-optical control and multiplexed readout of multiple superconducting qubits

Superconducting quantum circuits operate at millikelvin temperatures, typically requiring independent microwave cables for each qubit for connecting room-temperature control and readout electronics. However, scaling to large-scale processors hosting hundreds of qubits faces a severe input/output (I/O) bottleneck, as the dense cable arrays impose prohibitive constraints on physical footprint, thermal load, wiring complexity, and cost. Here we demonstrate a complete optical I/O architecture for superconducting quantum circuits, in which all control and readout signals are transmitted exclusively via optical photons. Employing a broadband traveling-wave Brillouin microwave-to-optical transducer, we achieve simultaneous frequency-multiplexed optical readout of two qubits. Combined with fiber-integrated photodiode arrays for control signal delivery, this closed-loop optical I/O introduces no measurable degradation to qubit coherence times, with an optically driven single-qubit gate fidelity showing only a 0.19% reduction relative to standard microwave operation. These results establish optical interconnects as a viable path toward large-scale superconducting quantum processors, and open the possibility of networking multiple superconducting quantum computers housed in separate dilution refrigerators through a centralized room-temperature control infrastructure.

quant-ph↗

arXiv2025

ICAD-LLM: One-for-All Anomaly Detection via In-Context Learning with Large Language Models

Anomaly detection (AD) is a fundamental task of critical importance across numerous domains. Current systems increasingly operate in rapidly evolving environments that generate diverse yet interconnected data modalities -- such as time series, system logs, and tabular records -- as exemplified by modern IT systems. Effective AD methods in such environments must therefore possess two critical capabilities: (1) the ability to handle heterogeneous data formats within a unified framework, allowing the model to process and detect multiple modalities in a consistent manner during anomalous events; (2) a strong generalization ability to quickly adapt to new scenarios without extensive retraining. However, most existing methods fall short of these requirements, as they typically focus on single modalities and lack the flexibility to generalize across domains. To address this gap, we introduce a novel paradigm: In-Context Anomaly Detection (ICAD), where anomalies are defined by their dissimilarity to a relevant reference set of normal samples. Under this paradigm, we propose ICAD-LLM, a unified AD framework leveraging Large Language Models' in-context learning abilities to process heterogeneous data within a single model. Extensive experiments demonstrate that ICAD-LLM achieves competitive performance with task-specific AD methods and exhibits strong generalization to previously unseen tasks, which substantially reduces deployment costs and enables rapid adaptation to new environments. To the best of our knowledge, ICAD-LLM is the first model capable of handling anomaly detection tasks across diverse domains and modalities.

cs.LG↗

arXiv2025

RoSA: Enhancing Parameter-Efficient Fine-Tuning via RoPE-aware Selective Adaptation in Large Language Models

Fine-tuning large language models is essential for task-specific adaptation, yet it remains computationally prohibitive. Parameter-Efficient Fine-Tuning (PEFT) methods have emerged as a solution, but current approaches typically ignore the distinct roles of model components and the heterogeneous importance across layers, thereby limiting adaptation efficiency. Motivated by the observation that Rotary Position Embeddings (RoPE) induce critical activations in the low-frequency dimensions of attention states, we propose RoPE-aware Selective Adaptation (RoSA), a novel PEFT framework that allocates trainable parameters in a more targeted and effective manner. RoSA comprises a RoPE-aware Attention Enhancement (RoAE) module, which selectively enhances the low-frequency components of RoPE-influenced attention states, and a Dynamic Layer Selection (DLS) strategy that adaptively identifies and updates the most critical layers based on LayerNorm gradient norms. By combining dimension-wise enhancement with layer-wise adaptation, RoSA achieves more targeted and efficient fine-tuning. Extensive experiments on fifteen commonsense and arithmetic benchmarks demonstrate that RoSA outperforms existing mainstream PEFT methods under comparable trainable parameters. The code is available to ease reproducibility at https://github.com/Applied-Machine-Learning-Lab/RoSA.

cs.CL↗

arXiv2025

High-Fidelity Controlled-Phase Gate for Binomial Codes via Geometric Phase Engineering

High-fidelity two-logical-qubit gates are essential for realizing fault-tolerant quantum computation with bosonic codes, yet experimentally reported fidelities have rarely exceeded 90\%. Here, we propose a geometric phase engineering approach for implementing controlled-phase gates for binomially encoded logical qubits. This method leverages the structural simplicity of geometric drives to reduce the numerical optimization dimensionality while fully incorporating system nonlinearities, enabling fast and high-fidelity logical operations. As an example, we experimentally demonstrate a process fidelity of 97.4$\pm$0.8\% for a controlled-Z gate between two binomial codes, surpassing all previously reported two-logical-qubit gates in bosonic codes. This work demonstrates that geometric phase engineering provides an effective and experimentally feasible route to fast, high-fidelity logical operations in bosonic quantum processors.

quant-ph↗

arXiv2025

Extending coherence time beyond break-even point using only drives and dissipation

Quantum error correction (QEC) aims to mitigate the loss of quantum information to the environment, which is a critical requirement for practical quantum computing. Existing QEC implementations heavily rely on measurement-based feedback, however, constraints on readout fidelity, hardware latency, and system complexity often limit both performance and scalability. Autonomous QEC (AQEC) seeks to overcome these obstacles by stabilizing logical codewords using introduced drives that provide coherent control and engineered dissipation. Here, we propose an AQEC protocol, derived from quantum channel simulation, that is applicable to arbitrary error-correcting codes. As a demonstration, we implement the protocol using a binomial code encoded in a long-lived bosonic mode (lifetime > 1ms), and extend the logical qubit coherence time to 1.04 times that of the best physical qubit in the system. This is the first experimental realization of an AQEC-protected bosonic logical qubit beyond the break-even point, proving that coherence time can indeed be extended by introducing only drives and dissipation. Our results highlight the performance and scalability potential of AQEC, marking an important step toward large-scale, universal quantum computing.

quant-ph↗

arXiv2024

Towards Personal Data Sharing Autonomy:A Task-driven Data Capsule Sharing System

Personal data custodian services enable data owners to share their data with data consumers in a convenient manner, anytime and anywhere. However, with data hosted in these services being beyond the control of the data owners, it raises significant concerns about privacy in personal data sharing. Many schemes have been proposed to realize fine-grained access control and privacy protection in data sharing. However, they fail to protect the rights of data owners to their data under the law, since their designs focus on the management of system administrators rather than enhancing the data owners' privacy. In this paper, we introduce a novel task-driven personal data sharing system based on the data capsule paradigm realizing personal data sharing autonomy. It enables data owners in our system to fully control their data, and share it autonomously. Specifically, we present a tamper-resistant data capsule encapsulation method, where the data capsule is the minimal unit for independent and secure personal data storage and sharing. Additionally, to realize selective sharing and informed-consent based authorization, we propose a task-driven data sharing mechanism that is resistant to collusion and EDoS attacks. Furthermore, by updating parts of the data capsules, the permissions granted to data consumers can be immediately revoked. Finally, we conduct a security and performance analysis, proving that our scheme is correct, sound, and secure, as well as revealing more advantageous features in practicality, compared with the state-of-the-art schemes.

cs.CR↗