arXiv subjects

Yiling Yu

Publications and source records attributed to Yiling Yu.

14 recordsLinked to original sources

arXiv2021

Enhanced Light-Matter Interaction in Two-Dimensional Transition Metal Dichalcogenides

Two dimensional (2D) transition metal dichalcogenide (TMDC) materials, such as MoS2, WS2, MoSe2, and WSe2, have received extensive attention in the past decade due to their extraordinary physical properties. The unique properties make them become ideal materials for various electronic, photonic and optoelectronic devices. However, their performance is limited by the relatively weak light-matter interactions due to their atomically thin form factor. Resonant nanophotonic structures provide a viable way to address this issue and enhance light-matter interactions in 2D TMDCs. Here, we provide an overview of this research area, showcasing relevant applications, including exotic light emission, absorption and scattering features. We start by overviewing the concept of excitons in 1L-TMDC and the fundamental theory of cavity-enhanced emission, followed by a discussion on the recent progress of enhanced light emission, strong coupling and valleytronics. The atomically thin nature of 1L-TMDC enables a broad range of ways to tune its electric and optical properties. Thus, we continue by reviewing advances in TMDC-based tunable photonic devices. Next, we survey the recent progress in enhanced light absorption over narrow and broad bandwidths using 1L or few-layer TMDCs, and their applications for photovoltaics and photodetectors. We also review recent efforts of engineering light scattering, e.g., inducing Fano resonances, wavefront engineering in 1L or few-layer TMDCs by either integrating resonant structures, such as plasmonic/Mie resonant metasurfaces, or directly patterning monolayer/few layers TMDCs. We then overview the intriguing physical properties of different types of van der Waals heterostructures, and their applications in optoelectronic and photonic devices. Finally, we draw our opinion on potential opportunities and challenges in this rapidly developing field of research.

physics.optics↗

arXiv2020

Exciton Mott Transition in Two-Dimensional Semiconductors

Exciton many-body interaction bear great implication for application in advanced photonic devices and quantum science and technology such as quantum computing, but the fundamental understanding about exciton many-body interaction is very limited. Here we provide numerous new insights into the fundamentals of exciton Mott transition (EMT), a manifestation of exciton many-body interaction evidenced by the ionization of excitons into a plasma of unbound electrons and holes, i.e. electron-hole plasma (EHP), by taking advantage of the unique properties of two-dimensional (2D) semiconductors like monolayer MoS2. We clarify long-standing controversies on the continuousness and criteria of EMT, quantify the charge carrier distribution among the co-existing exciton and EHP phases, establish correlation between the emission features and charge densities of EHP, and elucidate the physical state of EHP charge carriers as nanoscale electron-hole complex rather than individually free charges. These results lay down a foundation for furthering the studies of exciton many-body interaction and also for utilizing the interaction in quantum science/technology and the development of advanced optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2019

Low-loss composite photonic platform based on 2D semiconductor monolayers

Two dimensional materials such as graphene and transition metal dichalcogenides (TMDs) are promising for optical modulation, detection, and light emission since their material properties can be tuned on-demand via electrostatic doping. The optical properties of TMDs have been shown to change drastically with doping in the wavelength range near the excitonic resonances. However, little is known about the effect of doping on the optical properties of TMDs away from these resonances, where the material is transparent and therefore could be leveraged in photonic circuits. Here, we probe the electro-optic response of monolayer TMDs at near infrared (NIR) wavelengths (i.e. deep in the transparency regime), by integrating them on silicon nitride (SiN) photonic structures to induce strong light$-$matter interaction with the monolayer. We dope the monolayer to carrier densities of ($7.2 \pm 0.8$) $\times$ $10^{13} \textrm{cm}^{-2}$, by electrically gating the TMD using an ionic liquid. We show strong electro-refractive response in monolayer tungsten disulphide (WS$_2$) at NIR wavelengths by measuring a large change in the real part of refractive index $\Delta$n = $0.53$, with only a minimal change in the imaginary part $\Delta$k = $0.004$. The doping induced phase change ($\Delta$n), compared to the induced absorption ($\Delta$k) measured for WS$_2$ ($\Delta$n/$\Delta$k $\sim 125$), a key metric for photonics, is an order of magnitude higher than the $\Delta$n/$\Delta$k for bulk materials like silicon ($\Delta$n/$\Delta$k $\sim 10$), making it ideal for various photonic applications. We further utilize this strong tunable effect to demonstrate an electrostatically gated SiN-WS$_2$ phase modulator using a WS$_2$-HfO$_2$ (Hafnia)-ITO (Indium Tin Oxide) capacitive configuration, that achieves a phase modulation efficiency (V$_\pi$L) of 0.8 V $\cdot$ cm with a RC limited bandwidth of 0.3 GHz.

physics.app-ph↗

arXiv2017

Room-Temperature Electron-Hole Liquid in Monolayer MoS2

Excitons in semiconductors are usually non interacting and behave like an ideal gas, but may condense to a strongly correlated liquid like state, i.e. electron hole liquid (EHL), at high density and appropriate temperature. EHL is a macroscopic quantum state with exotic properties and represents the ultimate attainable charge excitation density in steady states. It bears great promise for a variety of fields such as ultrahigh power photonics and quantum science and technology. However, the condensation of gas like excitons to EHL has often been restricted to cryogenic temperatures, which significantly limits the prospect of EHL for use in practical applications. Herein we demonstrate the formation of EHL at room temperature in monolayer MoS2 by taking advantage of the monolayer's extraordinarily strong exciton binding energy. This work demonstrates the potential for the liquid like state of charge excitations to be a useful platform for the studies of macroscopic quantum phenomena and the development of optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2017

Giant Gating Tunability of Optical Refractive Index in Transition Metal Dichalcogenide Monolayers

We report that the refractive index of transition metal dichacolgenide (TMDC) monolayers, such as MoS2, WS2, and WSe2, can be substantially tuned by > 60% in the imaginary part and > 20% in the real part around exciton resonances using CMOS-compatible electrical gating. This giant tunablility is rooted in the dominance of excitonic effects in the refractive index of the monolayers and the strong susceptibility of the excitons to the influence of injected charge carriers. The tunability mainly results from the effects of injected charge carriers to broaden the spectral width of excitonic interband transitions and to facilitate the interconversion of neutral and charged excitons. The other effects of the injected charge carriers, such as renormalizing bandgap and changing exciton binding energy, only play negligible roles. We also demonstrate that the atomically thin monolayers, when combined with photonic structures, can enable the efficiencies of optical absorption (reflection) tuned from 40% (60%) to 80% (20%) due to the giant tunability of refractive index. This work may pave the way towards the development of field-effect photonics in which the optical functionality can be controlled with CMOS circuits.

physics.optics↗

arXiv2017

Enhancing Multifunctionalities of Transition Metal Dichalcogenide Monolayers via Intercalation of Molecules and Ions

Transition metal dichalcogenide (TMDC) monolayers present a remarkable multifunctional material with potential to enable the development of a wide range of novel devices. However, the functionalities observed often fall short of the expectation, which hinders the device development. Here we demonstrate that the optical, catalytic, and thermal functionalities of TMDC monolayers can all be substantially enhanced by up to orders of magnitude with the intercalation of water molecules or small cations (H+ and Li+) between the monolayers and underlying substrates. In contrast, the same molecules or cations adsorbed on top of the monolayers show negligible effects. We also discover two major roles of the intercalated species in the enhancement: doping the monolayers and modifying the interaction of the monolayers with the substrate. The result points out a versatile and convenient strategy of using the intercalation of molecules or ions to enhance the functionalities of TMDC monolayers.

cond-mat.mtrl-sci↗

arXiv2015

Fundamental Limits of Exciton-Exciton Annihilation for Light Emission in Transition Metal Dichalcogenide Monolayers

We quantitatively illustrate the fundamental limit that exciton-exciton annihilation (EEA) may impose to the light emission of monolayer transition metal dichalcogenide (TMDC) materials. The EEA in TMDC monolayers shows dependence on the interaction with substrates as its rate increases from 0.1 cm2/s (0.05 cm2/s) to 0.3 cm2/s (0.1 cm2/s) with the substrates removed for WS2 (MoS2) monolayers. It turns to be the major pathway of exciton decay and dominates the luminescence efficiency when the exciton density is beyond 1010 cm-2 in suspended monolayers or 1011 cm-2 in supported monolayers. This sets an upper limit on the density of injected charges in light emission devices for the realization of optimal luminescence efficiency. The strong EEA rate also dictates the pumping threshold for population inversion in the monolayers to be 12-18 MW/cm2 (optically) or 2.5-4x105 A/cm2 (electrically).

physics.optics↗

arXiv2015

Exciton-dominated Dielectric Function of Atomically Thin MoS2 Films

We systematically measure the dielectric function of atomically thin MoS2 films with different layer numbers and demonstrate that excitonic effects play a dominant role in the dielectric function when the films are less than 5-7 layers thick. The dielectric function shows an anomalous dependence on the layer number. It decreases with the layer number increasing when the films are less than 5-7 layers thick but turns to increase with the layer number for thicker films. We show that this is because the excitonic effect is very strong in the thin MoS2 films and its contribution to the dielectric function may dominate over the contribution of the band structure. We also extract the value of layer-dependent exciton binding energy and Bohr radius in the films by fitting the experimental results with an intuitive model. The dominance of excitonic effects is in stark contrast with what reported at conventional materials whose dielectric functions are usually dictated by band structures. The knowledge of the dielectric function may enable capabilities to engineer the light-matter interactions of atomically thin MoS2 films for the development of novel photonic devices, such as metamaterials, waveguides, light absorbers, and light emitters.

cond-mat.mtrl-sci↗

arXiv2014

Ultrathin Semiconductor Perfect Light Absorbers with High Spectral, Polarization, and Angle Selectivity for Arbitrary Wavelengths

Enabling perfect light absorption in ultrathin materials promises the development of exotic photonic devices. Here we demonstrate new strategies that can provide capabilities to rationally design ultrathin (thickness < {\lambda}/10~{\lambda}/5) semiconductor perfect absorbers for arbitrary wavelengths, including those at which the intrinsic absorption of the semiconductor is weak, e.g. Si for near-IR wavelengths. This is in stark contrast with the existing studies on ultrathin perfect absorbers, which have focused on metallic materials or highly-absorptive semiconductors. Our design strategies are built upon an intuitive model, coupled leaky mode theory that we recently developed and can turn the design for perfect absorbers to the design for leaky modes. The designed absorber is featured with extraordinary absorption enhancement, miniaturized dimension, and high selectivity for the wavelength, polarization, and angle of incident light. It can enable the development of flexible, light-weight, high-performance, cost-effective, and multifunctional optoelectronic devices that are difficult with current light absorbers.

physics.optics↗

arXiv2013

Semiconductor solar superabsorber

Understanding the maximal enhancement of solar absorption in semiconductor materials by light trapping promises the development of affordable solar cells. However, the conventional Lambertian limit is only valid for idealized material systems with weak absorption, and cannot hold for the typical semiconductor materials used in solar cells due to the substantial absorption of these materials. Herein we theoretically demonstrate the maximal solar absorption enhancement for semiconductor materials and elucidate the general design principle for light trapping structures to approach the theoretical maximum. By following the principles, we design a practical light trapping structure that can enable an ultrathin layer of semiconductor materials,for instance, 10 nm thick a-Si, absorb > 90% sunlight above the bandgap. The design has active materials with one order of magnitude less volume than any of the existing solar light trapping designs in literature. This work points towards the development of ultimate solar light trapping techniques.

physics.optics↗

arXiv2013

Non-equilibrium Thermal Super-radiation of Real Materials

We elucidate the theoretically maximal thermal radiation power from real materials at a given temperature. Our results demonstrate that the thermal radiation from real materials may be larger than the blackbody emission in free space,and indicate that this is rooted in the high refractive index of the materials. The refractive index contrast between the materials and environment dictates the radiation of real materials genetically not under thermodynamic equilibrium, but on the other hand can give rise to a larger density of photonic modes than that of the blackbody. One key to maximize the thermal radiation is to minimize the impedance mismatch of the materials with environment. By following this principle, we present a design of a carbon core coated by a four-layer transparent shell with gradually changed refractive indexes that can emit > 30 times more power than the blackbody, which reasonably approaches the predicted radiation maximum.

physics.optics↗

arXiv2013

Leaky Mode Engineering: A General Design Principle for Dielectric Optical Antenna Solar Absorbers

We present a general principle for the rational design of dielectric optical antennas with optimal solar absorption enhancement: leaky mode engineering. This builds upon our previous study that demonstrates the solar absorption of a material with a given volume only dependent on the density and the radiative loss of leaky modes of the material. Here we systematically examine the correlation among the modal properties (density and radiative loss) of leaky modes, physical features, and solar absorption of dielectric antenna structures. Our analysis clearly points out the general guidelineS for the design of dielectric optical antennas with optimal solar absorption enhancement: a) using 0D structures; b) the shape does not matter much; c) heterostructuring with non-absorbing materials is a promising strategy; d) the design of a large-scale nanostructure array can use the solar absorption of single nanostructures as a reasonable reference.

physics.optics↗

arXiv2013

Solar Superabsorption of Semiconductor Materials

We theoretically demonstrate the fundamental limit in volume for given materials (e.g. Si, a-Si, CdTe) to fully absorb the solar radiation above bandgap, which we refer as solar superabsorption limit. We also point out the general principles for experimentally designing light trapping structures to approach the superabsorption. This study builds upon an intuitive model, coupled leaky mode theory (CLMT), for the analysis of light absorption in nanostructures. The CLMT provides a useful variable transformation. Unlike the existing methods that rely on information of physical features (e.g. morphology, dimensionality) to analyze light absorption, the CLMT can evaluate light absorption in given materials with only two variables, the radiative loss and the resonant wavelength, of leaky modes, regardless the physical features of the materials. This transformation allows for surveying the entire variable space to find out the solar superabsorption and provides physical insights to guide the design of solar superabsorbing structures.

physics.optics↗

arXiv2013

General modal properties of optical resonances in subwavelength nonspherical dielectric structures

Subwavelength dielectric structures offer an attractive low loss alternative to plasmonic structures for the development of resonant optics functionality such as metamaterials. Nonspherical like rectangular structures are of most interest from the standpoint of device development due to fabrication convenience. However, no intuitive fundamental understanding of optical resonance in nonspherical structures is available, which has substantially delayed the device development with dielectric materials. Here we elucidate the general fundamentals of optical resonances in nonspherical subwavelength dielectric structures of different shapes (rectangular or triangular) and dimensionalities (1D nanowires and 0D nanoparticles). We demonstrate that the optical properties (i.e. light absorption) of nonspherical structures are dictated by the eigenvalue of the structure's leaky modes. Leaky modes are defined as natural optical modes with propagating waves outside the structure. We also elucidate the dependence of the eigenvalue on physical features of the structures. The eigenvalue shows scaling invariance with the overall size, weakly relies on the refractive index, but linearly depends on the size ratio of different sizes of the structure. We propose a modified Fabry-Perot model to account for this linear dependence. Knowledge of the dominant role of leaky modes and the dependence of leaky mode on physical features can serve as a powerful guide for the rational design of devices with desired optical resonances. It opens up a pathway to design devices with functionality that has not been explored due to lack of intuitive understanding, for instance, imaging devices able to sense incident angle, or superabsorbing photodetectors.

physics.optics↗