arXiv subjects

Yi Luo

Publications and source records attributed to Yi Luo.

At least 127 records · Page 7Linked to original sources

arXiv2021

Atomic-Scale Probing of Heterointerface Phonon Bridges in Nitride Semiconductor

Interface phonon modes that are generated by several atomic layers at the heterointerface play a major role in the interface thermal conductance for nanoscale high-power devices such as nitride-based high-electron-mobility transistors and light emitting diodes. Here we measure the local phonon spectra across AlN/Si and AlN/Al interfaces using atomically resolved vibrational electron energy-loss spectroscopy in a scanning transmission electron microscope. At the AlN/Si interface, we observe various localized phonon modes, of which the extended and interfacial modes act as bridges to connect the bulk AlN modes and bulk Si modes, and are expected to boost the inelastic phonon transport thus substantially contribute to interface thermal conductance. In comparison, no such phonon bridge is observed at the AlN/Al interface, for which partially extended modes dominate the interface thermal conductivity. This work provides valuable insights into understanding the interfacial thermal transport in nitride semiconductors and useful guidance for thermal management via interface engineering.

cond-mat.mes-hall↗

arXiv2021

Circular displacement current induced anomalous magneto-optical effects in high index Mie resonators

Dielectric Mie nanoresonators showing strong light-matter interaction at the nanoscale may enable new functionality in photonic devices. Recently, strong magneto-optical effects have been observed in magneto-optical nanophotonic devices due to the electromagnetic field localization. However, most reports so far have been focused on the enhancement of conventional magneto-optical effects. Here, we report the observation of circular displacement current induced anomalous magneto-optical effects in high-index-contrast Si/Ce:YIG/YIG/SiO2 Mie resonators. In particular, giant modulation of light intensity in transverse magnetic configuration up to 6.4 % under s-polarized incidence appears, which is non-existent in planar magneto-optical thin films. Apart from that, we observe a large rotation of transmitted light polarization in the longitudinal magnetic configuration under near normal incidence conditions, which is two orders of magnitude higher than for a planar magneto-optical thin film. These phenomena are essentially originated from the unique circular displacement current when exciting the magnetic resonance modes in the Mie resonators, which changes the incident electric field direction locally. Our work indicates an uncharted territory of light polarization control based on the complex modal profiles in all-dielectric magneto-optical Mie resonators and metasurfaces, which opens the door for versatile control of light propagation by magnetization for a variety of applications in vectoral magnetic field and biosensing, free space non-reciprocal photonic devices, magneto-optical imaging and optomagnetic memories.

physics.optics↗

arXiv2021

Computational Imaging Without a Computer: Seeing Through Random Diffusers at the Speed of Light

Imaging through diffusers presents a challenging problem with various digital image reconstruction solutions demonstrated to date using computers. We present a computer-free, all-optical image reconstruction method to see through random diffusers at the speed of light. Using deep learning, a set of diffractive surfaces are designed/trained to all-optically reconstruct images of objects that are covered by random phase diffusers. We experimentally demonstrated this concept using coherent THz illumination and all-optically reconstructed objects distorted by unknown, random diffusers, never used during training. Unlike digital methods, all-optical diffractive reconstructions do not require power except for the illumination light. This diffractive solution to see through diffusers can be extended to other wavelengths, and might fuel various applications in biomedical imaging, astronomy, atmospheric sciences, oceanography, security, robotics, among others.

physics.optics↗

arXiv2021

Distilling Self-Knowledge From Contrastive Links to Classify Graph Nodes Without Passing Messages

Nowadays, Graph Neural Networks (GNNs) following the Message Passing paradigm become the dominant way to learn on graphic data. Models in this paradigm have to spend extra space to look up adjacent nodes with adjacency matrices and extra time to aggregate multiple messages from adjacent nodes. To address this issue, we develop a method called LinkDist that distils self-knowledge from connected node pairs into a Multi-Layer Perceptron (MLP) without the need to aggregate messages. Experiment with 8 real-world datasets shows the MLP derived from LinkDist can predict the label of a node without knowing its adjacencies but achieve comparable accuracy against GNNs in the contexts of semi- and full-supervised node classification. Moreover, LinkDist benefits from its Non-Message Passing paradigm that we can also distil self-knowledge from arbitrarily sampled node pairs in a contrastive way to further boost the performance of LinkDist.

cs.LG↗

arXiv2021

Memory-Associated Differential Learning

Conventional Supervised Learning approaches focus on the mapping from input features to output labels. After training, the learnt models alone are adapted onto testing features to predict testing labels in isolation, with training data wasted and their associations ignored. To take full advantage of the vast number of training data and their associations, we propose a novel learning paradigm called Memory-Associated Differential (MAD) Learning. We first introduce an additional component called Memory to memorize all the training data. Then we learn the differences of labels as well as the associations of features in the combination of a differential equation and some sampling methods. Finally, in the evaluating phase, we predict unknown labels by inferencing from the memorized facts plus the learnt differences and associations in a geometrically meaningful manner. We gently build this theory in unary situations and apply it on Image Recognition, then extend it into Link Prediction as a binary situation, in which our method outperforms strong state-of-the-art baselines on ogbl-ddi dataset.

cs.LG↗

arXiv2021

Planar multi-aperture fish-eye lens using metagrating

The design of compact optical systems with large field of view has been difficult due to the requirement of many elements or a curved focal plane to reduce off-axis aberration. We propose a multi-aperture lens design to effectively resolve these issues. Metagrating-based deflectors are placed near entrance pupils of multi-aperture lens array to enhance field of view. A systematic design method is given in details. In design examples, a $\pm$80$^\circ$ field of view using only two planar optical elements is achieved. Also, the system is extremely compact with total track lengths an order of magnitude smaller than conventional fish-eye lenses, while the imaging performance is comparable with conventional designs.

physics.optics↗

arXiv2021

Quantitative particle agglutination assay for point-of-care testing using mobile holographic imaging and deep learning

Particle agglutination assays are widely adapted immunological tests that are based on antigen-antibody interactions. Antibody-coated microscopic particles are mixed with a test sample that potentially contains the target antigen, as a result of which the particles form clusters, with a size that is a function of the antigen concentration and the reaction time. Here, we present a quantitative particle agglutination assay that combines mobile lens-free microscopy and deep learning for rapidly measuring the concentration of a target analyte; as its proof-of-concept, we demonstrate high-sensitivity C-reactive protein (hs-CRP) testing using human serum samples. A dual-channel capillary lateral flow device is designed to host the agglutination reaction using 4 uL of serum sample with a material cost of 1.79 cents per test. A mobile lens-free microscope records time-lapsed inline holograms of the lateral flow device, monitoring the agglutination process over 3 min. These captured holograms are processed, and at each frame the number and area of the particle clusters are automatically extracted and fed into shallow neural networks to predict the CRP concentration. 189 measurements using 88 unique patient serum samples were utilized to train, validate and blindly test our platform, which matched the corresponding ground truth concentrations in the hs-CRP range (0-10 ug/mL) with an R2 value of 0.912. This computational sensing platform was also able to successfully differentiate very high CRP concentrations (e.g., >10-500 ug/mL) from the hs-CRP range. This mobile, cost-effective and quantitative particle agglutination assay can be useful for various point-of-care sensing needs and global health related applications.

physics.med-ph↗

arXiv2021

Group Communication with Context Codec for Lightweight Source Separation

Despite the recent progress on neural network architectures for speech separation, the balance between the model size, model complexity and model performance is still an important and challenging problem for the deployment of such models to low-resource platforms. In this paper, we propose two simple modules, group communication and context codec, that can be easily applied to a wide range of architectures to jointly decrease the model size and complexity without sacrificing the performance. A group communication module splits a high-dimensional feature into groups of low-dimensional features and captures the inter-group dependency. A separation module with a significantly smaller model size can then be shared by all the groups. A context codec module, containing a context encoder and a context decoder, is designed as a learnable downsampling and upsampling module to decrease the length of a sequential feature processed by the separation module. The combination of the group communication and the context codec modules is referred to as the GC3 design. Experimental results show that applying GC3 on multiple network architectures for speech separation can achieve on-par or better performance with as small as 2.5% model size and 17.6% model complexity, respectively.

eess.AS↗

arXiv2021

Dynamic imaging and characterization of volatile aerosols in e-cigarette emissions using deep learning-based holographic microscopy

Various volatile aerosols have been associated with adverse health effects; however, characterization of these aerosols is challenging due to their dynamic nature. Here we present a method that directly measures the volatility of particulate matter (PM) using computational microscopy and deep learning. This method was applied to aerosols generated by electronic cigarettes (e-cigs), which vaporize a liquid mixture (e-liquid) that mainly consists of propylene glycol (PG), vegetable glycerin (VG), nicotine, and flavoring compounds. E-cig generated aerosols were recorded by a field-portable computational microscope, using an impaction-based air sampler. A lensless digital holographic microscope inside this mobile device continuously records the inline holograms of the collected particles. A deep learning-based algorithm is used to automatically reconstruct the microscopic images of e-cig generated particles from their holograms, and rapidly quantify their volatility. To evaluate the effects of e-liquid composition on aerosol dynamics, we measured the volatility of the particles generated by flavorless, nicotine-free e-liquids with various PG/VG volumetric ratios, revealing a negative correlation between the particles' volatility and the volumetric ratio of VG in the e-liquid. For a given PG/VG composition, the addition of nicotine dominated the evaporation dynamics of the e-cig aerosol and the aforementioned negative correlation was no longer observed. We also revealed that flavoring additives in e-liquids significantly decrease the volatility of e-cig aerosol. The presented holographic volatility measurement technique and the associated mobile device might provide new insights on the volatility of e-cig generated particles and can be applied to characterize various volatile PM.

cs.LG↗

arXiv2021

Spectrally-Encoded Single-Pixel Machine Vision Using Diffractive Networks

3D engineering of matter has opened up new avenues for designing systems that can perform various computational tasks through light-matter interaction. Here, we demonstrate the design of optical networks in the form of multiple diffractive layers that are trained using deep learning to transform and encode the spatial information of objects into the power spectrum of the diffracted light, which are used to perform optical classification of objects with a single-pixel spectroscopic detector. Using a time-domain spectroscopy setup with a plasmonic nanoantenna-based detector, we experimentally validated this machine vision framework at terahertz spectrum to optically classify the images of handwritten digits by detecting the spectral power of the diffracted light at ten distinct wavelengths, each representing one class/digit. We also report the coupling of this spectral encoding achieved through a diffractive optical network with a shallow electronic neural network, separately trained to reconstruct the images of handwritten digits based on solely the spectral information encoded in these ten distinct wavelengths within the diffracted light. These reconstructed images demonstrate task-specific image decompression and can also be cycled back as new inputs to the same diffractive network to improve its optical object classification. This unique machine vision framework merges the power of deep learning with the spatial and spectral processing capabilities of diffractive networks, and can also be extended to other spectral-domain measurement systems to enable new 3D imaging and sensing modalities integrated with spectrally encoded classification tasks performed through diffractive optical networks.

cs.CV↗

arXiv2021

High-current CNT films grown directly on commercially available 2.5D substrates for low-voltage field-emission electron sources

Carbon nanotube (CNT) based electronic devices are promising for beyond-silicon solid-state electronics and vacuum micro-nano-electronics. Despite rapid progress in CNT field-effect transistor related solid-state electronics, the development of CNT-based vacuum nanoelectronic devices is substantially blocked by the longstanding challenges in demanding high-current field-emission (FE) electron sources at low operating voltage. In addition to CNTs' properties, FE characteristics are also affected by substrate morphology and interface state. This work demonstrates high-current FE characteristics at relatively low operating voltage by using CNT films grown directly on commercially available 2.5D substrates with matched feature size and improved interface contact. Simulation results indicate that the commercially available 2.5D substrate including nickel foam (NiF) and carbon cloth (CC) with appropriate feature size would dramatically help to enhance emission current at a relatively lower voltage. Modified fabrication process results in improved contact between CNTs and the underlying 2.5D substrates. Twenty times higher emission current density with halved lower turn-on electric field achieved by CNTs grown directly on randomly picked NiF shows the potential of 2.5D substrate with good contact in improving FE characteristics. Finally, a high emission current (6 mA) with approximately 75 percent decrease in turn-on electric field was realized by matching the feature size of 2.5D substrate with that of CNTs, bringing us significantly closer to reliable high-current and low-voltage FE electron sources for practical applications.

physics.app-ph↗

arXiv2021

Ultrafast Parallel LiDAR with Time-encoding and Spectral Scanning: Breaking the Time-of-flight Limit

Light detection and ranging (LiDAR) has been widely used in autonomous driving and large-scale manufacturing. Although state-of-the-art scanning LiDAR can perform long-range three-dimensional imaging, the frame rate is limited by both round-trip delay and the beam steering speed, hindering the development of high-speed autonomous vehicles. For hundred-meter level ranging applications, a several-time speedup is highly desirable. Here, we uniquely combine fiber-based encoders with wavelength-division multiplexing devices to implement all-optical time-encoding on the illumination light. Using this method, parallel detection and fast inertia-free spectral scanning can be achieved simultaneously with single-pixel detection. As a result, the frame rate of a scanning LiDAR can be multiplied with scalability. We demonstrate a 4.4-fold speedup for a maximum 75-m detection range, compared with a time-of-flight-limited laser ranging system. This approach has the potential to improve the velocity of LiDAR-based autonomous vehicles to the regime of hundred kilometers per hour and open up a new paradigm for ultrafast-frame-rate LiDAR imaging.

physics.optics↗

arXiv2021

Dual-Path Modeling for Long Recording Speech Separation in Meetings

The continuous speech separation (CSS) is a task to separate the speech sources from a long, partially overlapped recording, which involves a varying number of speakers. A straightforward extension of conventional utterance-level speech separation to the CSS task is to segment the long recording with a size-fixed window and process each window separately. Though effective, this extension fails to model the long dependency in speech and thus leads to sub-optimum performance. The recent proposed dual-path modeling could be a remedy to this problem, thanks to its capability in jointly modeling the cross-window dependency and the local-window processing. In this work, we further extend the dual-path modeling framework for CSS task. A transformer-based dual-path system is proposed, which integrates transform layers for global modeling. The proposed models are applied to LibriCSS, a real recorded multi-talk dataset, and consistent WER reduction can be observed in the ASR evaluation for separated speech. Also, a dual-path transformer equipped with convolutional layers is proposed. It significantly reduces the computation amount by 30% with better WER evaluation. Furthermore, the online processing dual-path models are investigated, which shows 10% relative WER reduction compared to the baseline.

eess.AS↗

arXiv2021

Holographic image reconstruction with phase recovery and autofocusing using recurrent neural networks

Digital holography is one of the most widely used label-free microscopy techniques in biomedical imaging. Recovery of the missing phase information of a hologram is an important step in holographic image reconstruction. Here we demonstrate a convolutional recurrent neural network (RNN) based phase recovery approach that uses multiple holograms, captured at different sample-to-sensor distances to rapidly reconstruct the phase and amplitude information of a sample, while also performing autofocusing through the same network. We demonstrated the success of this deep learning-enabled holography method by imaging microscopic features of human tissue samples and Papanicolaou (Pap) smears. These results constitute the first demonstration of the use of recurrent neural networks for holographic imaging and phase recovery, and compared with existing methods, the presented approach improves the reconstructed image quality, while also increasing the depth-of-field and inference speed.

eess.IV↗

arXiv2021

Low half-wave-voltage, ultra-high bandwidth thin-film LiNbO3 modulator based on hybrid waveguide and periodic capacitively loaded electrodes

A novel thin-film LiNbO3 (TFLN) electro-optic modulator is proposed and demonstrated. LiNbO3-silica hybrid waveguide is adopted to maintain low optical loss for an electrode spacing as narrow as 3 μm, resulting in a record low half-wave-voltage length product of only 1.7 V*cm. Capacitively loaded traveling-wave electrodes (CL-TWEs) are employed to reduce the microwave loss, while quartz substrate is used in place of silicon substrate to achieve velocity matching. The fabricated TFLN modulator with a 5-mm-long modulation region exhibits a half-wave-voltage of 3.4 V and merely 1.3 dB roll-off in electro-optic response up to 67 GHz, and a 3-dB modulation bandwidth over 110 GHz is predicted.

physics.app-ph↗

arXiv2020

Continuous Speech Separation Using Speaker Inventory for Long Multi-talker Recording

Leveraging additional speaker information to facilitate speech separation has received increasing attention in recent years. Recent research includes extracting target speech by using the target speaker's voice snippet and jointly separating all participating speakers by using a pool of additional speaker signals, which is known as speech separation using speaker inventory (SSUSI). However, all these systems ideally assume that the pre-enrolled speaker signals are available and are only evaluated on simple data configurations. In realistic multi-talker conversations, the speech signal contains a large proportion of non-overlapped regions, where we can derive robust speaker embedding of individual talkers. In this work, we adopt the SSUSI model in long recordings and propose a self-informed, clustering-based inventory forming scheme for long recording, where the speaker inventory is fully built from the input signal without the need for external speaker signals. Experiment results on simulated noisy reverberant long recording datasets show that the proposed method can significantly improve the separation performance across various conditions.

eess.AS↗

arXiv2020

A software decoder implementation for H.266/VVC video coding standard

Versatile Video Coding Standard (H.266/VVC) was completed by Joint Video Expert Team (JVET) of ITU-T and ISO/IEC, in July 2020. This new ITU recommendation/international standard is a successor to the well-known H.265/HEVC video coding standard with roughly doubled compression efficiency, but also at the cost of an increased computational complexity. The complexity of H.266/VVC decoder processing modules is studied in this paper. An optimized decoder implementation using SIMD instruction extensions and additional parallel processing including data and task level parallelism is presented, which can achieve real-time decoding of 4K 60fps VVC bitstreams on an x86 based CPU.

eess.IV↗

arXiv2020

Terahertz Pulse Shaping Using Diffractive Surfaces

Recent advances in deep learning have been providing non-intuitive solutions to various inverse problems in optics. At the intersection of machine learning and optics, diffractive networks merge wave-optics with deep learning to design task-specific elements to all-optically perform various tasks such as object classification and machine vision. Here, we present a diffractive network, which is used to shape an arbitrary broadband pulse into a desired optical waveform, forming a compact pulse engineering system. We experimentally demonstrate the synthesis of square pulses with different temporal-widths by manufacturing passive diffractive layers that collectively control both the spectral amplitude and the phase of an input terahertz pulse. Our results constitute the first demonstration of direct pulse shaping in terahertz spectrum, where a complex-valued spectral modulation function directly acts on terahertz frequencies. Furthermore, a Lego-like physical transfer learning approach is presented to illustrate pulse-width tunability by replacing part of an existing network with newly trained diffractive layers, demonstrating its modularity. This learning-based diffractive pulse engineering framework can find broad applications in e.g., communications, ultra-fast imaging and spectroscopy.

physics.optics↗