arXiv subjects

Yi Huang

Publications and source records attributed to Yi Huang.

At least 217 records · Page 12Linked to original sources

arXiv2018

A Tamper-Free Semi-Universal Communication System for Deletion Channels

We investigate the problem of reliable communication between two legitimate parties over deletion channels under an active eavesdropping (aka jamming) adversarial model. To this goal, we develop a theoretical framework based on probabilistic finite-state automata to define novel encoding and decoding schemes that ensure small error probability in both message decoding as well as tamper detecting. We then experimentally verify the reliability and tamper-detection property of our scheme.

stat.ML↗

arXiv2018

Losses in plasmonics: from mitigating energy dissipation to embracing loss-enabled functionalities

Unlike conventional optics, plasmonics enables unrivalled concentration of optical energy well beyond the diffraction limit of light. However, a significant part of this energy is dissipated as heat. Plasmonic losses present a major hurdle in the development of plasmonic devices and circuits that can compete with other mature technologies. Until recently, they have largely kept the use of plasmonics to a few niche areas where loss is not a key factor, such as surface enhanced Raman scattering and biochemical sensing. Here, we discuss the origin of plasmonic losses and various approaches to either minimize or mitigate them based on understanding of fundamental processes underlying surface plasmon modes excitation and decay. Along with the ongoing effort to find and synthesize better plasmonic materials, optical designs that modify the optical powerflow through plasmonic nanostructures can help in reducing both radiative damping and dissipative losses of surface plasmons. Another strategy relies on the development of hybrid photonic-plasmonic devices by coupling plasmonic nanostructures to resonant optical elements. Hybrid integration not only helps to reduce dissipative losses and radiative damping of surface plasmons, but also makes possible passive radiative cooling of nano-devices. Finally, we review emerging applications of thermoplasmonics that leverage Ohmic losses to achieve new enhanced functionalities. The most successful commercialized example of a loss-enabled novel application of plasmonics is heat-assisted magnetic recording. Other promising technological directions include thermal emission manipulation, cancer therapy, nanofabrication, nano-manipulation, plasmon-enabled material spectroscopy and thermo-catalysis, and solar water treatment.

physics.optics↗

arXiv2017

Symmetry-breaking dynamics of the finite-size Lipkin-Meshkov-Glick model near ground state

We study the dynamics of the Lipkin-Meshkov-Glick (LMG) model with finite number of spins. In the thermodynamic limit, the ground state of the LMG model with isotropic Hamiltonian in broken phase breaks to a mean-field ground state with a certain direction. However, when the spins number $N$ is finite, the exact ground state is always unique and is not given by a classical mean-field ground state. Here we prove that for $N$ is large but finite, through a tiny external perturbation, a localized state which is close to a mean-field ground state can be prepared, which mimics a spontaneous symmetry breaking (SSB). Besides, we find the localized in-plane spin polarization oscillates with two different frequencies $\sim O(1/N)$, and the lifetime of the localized state is long enough to exhibit this oscillation. We numerically test the analytical results and find that they agree with each other very well. Finally, we link the phenomena to quantum time crystals and quasicrystals.

quant-ph↗

arXiv2017

Semi-Transparent Solar Cell enabled by Frequency Selective Light Trapping

We propose a frequency selective light trapping scheme that enables the creation of more visually-transparent and yet simultaneously more efficient semitransparent solar cells. A nanoparticle scattering layer and photonic stack back reflector create a selective trapping effect by total internal reflection within a medium, increasing absorption of IR light. We propose a strong frequency selective scattering layer using spherical TiO2 nanoparticles with radius of 255 nm and area density of 1.1% in a medium with index of refraction of 1.5. Using detailed numerical simulations for this configuration, we find that it is possible to create a semitransparent silicon solar cell that has a Shockley Queisser efficiency of 12.0%\pm0.4% with a visible transparency of 60.2%\pm1.3%, 13.3%\pm1.3 more visibly-transparent than a bare silicon cell at the same efficiency.

physics.app-ph↗

arXiv2017

Strong Edge Magnetism and Tunable Energy Gaps in Zigzag Graphene Quantum Dots with High Stability

Graphene is a nonmagnetic semimetal and cannot be directly used as electronic or spintronic devices. We demonstrate that graphene quantum dots (GQDs) can exhibit strong edge magnetism and tunable energy gaps due to the presence of localized edge states. By using large-scale first principle density functional theory (DFT) calculations and detailed analysis based on model Hamiltonians, we can show that the zigzag edge states in GQDs become much stronger and more localized as the system size increases. The enhanced edge states induce strong electron-electron interactions along the edges of GQDs, ultimately resulting in a magnetic phase transition from nonmagnetic to intra-edge ferromagnetic and inter-edge antiferromagnetic, when the diameter is larger than 4.5 nm. Our analysis shows that the inter-edge superexchange interaction of antiferromagnetic states between two nearest-neighbor zigzag edges in GQDs is much stronger than that exists between two parallel zigzag edges in GQDs and graphene nanoribbons. Furthermore, such strong and localized edge states also induce GQDs semiconducting with tunable energy gaps, mainly controlled by adjusting the system size. Our results show that the quantum confinement effect, inter-edge superexchange (antiferromagnetic), and intra-edge direct exchange (ferromagnetic) interactions are crucial for the electronic and magnetic properties of zigzag GQDs at the nanoscale.

cond-mat.mtrl-sci↗

arXiv2017

Effects of eccentricity on climates and habitability of terrestrial exoplanets around M dwarfs

Eccentricity is an important orbital parameter. Understanding its effect on planetary climate and habitability is critical for us to search for a habitable world beyond our solar system. The orbital configurations of M-dwarf planets are always tidally-locked at resonance states, which are quite different from those around Sun-like stars. M-dwarf planets need to be investigated separately. Here we use a comprehensive three-dimensional atmospheric general circulation model to systematically investigate how eccentricity influences climate and habitability of M-dwarf exoplanets. The simulation results show that (1) the seasonal climatic cycles of such planets are very weak even for e = 0.4. It is unlikely that an aqua planet falls out of a habitable zone during its orbit. (2) The annual global mean surface temperature significantly increases with increased eccentricity, due to the decrease of the cloud albedo. Both the runaway greenhouse inner edge and moist greenhouse inner edge shift outward. (3) Planets in an eccentric orbit can be captured in other spin-orbit resonance states which lead to different climate patterns, namely eyeball pattern and striped-ball pattern.The striped-ball pattern has evidently higher surface temperatures due to the reduced planetary albedo. Near the outer edge, planets with p = 1.0 and 2.0 are more resistant to the snowball state due to more locally-concentrated stellar fluxes. Thus, planets with integer spin-orbit resonance numbers have wider habitable zones than those with half-integer spin-orbit resonance states. Above all, as a comparison to circular orbit, eccentricity shrinks the width of the habitable zone.

astro-ph.EP↗

arXiv2017

Network Construction with Ordered Constraints

In this paper, we study the problem of constructing a network by observing ordered connectivity constraints, which we define herein. These ordered constraints are made to capture realistic properties of real-world problems that are not reflected in previous, more general models. We give hardness of approximation results and nearly-matching upper bounds for the offline problem, and we study the online problem in both general graphs and restricted sub-classes. In the online problem, for general graphs, we give exponentially better upper bounds than exist for algorithms for general connectivity problems. For the restricted classes of stars and paths we are able to find algorithms with optimal competitive ratios, the latter of which involve analysis using a potential function defined over pq-trees.

cs.DS↗

arXiv2016

Entropic and Near-Field Improvements of Thermoradiative Cells

A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest low-grade heat into electricity. By analyzing the entropy content of different spectral components of thermal radiation, we identify an approach to increase the efficiency of thermoradiative cells via spectrally selecting long-wavelength photons for radiative exchange. Furthermore, we predict that the near-field photon extraction by coupling photons generated from interband electronic transition to phonon polariton modes on the surface of a heat sink can increase the conversion efficiency as well as the power generation density, providing more opportunities to efficiently utilize terrestrial emission for clean energy. An ideal InSb thermoradiative cell can achieve a maximum efficiency and power density up to 20.4 % and 327 Wm-2, respectively, between a hot source at 500K and a cold sink at 300K. However, sub-bandgap and non-radiative losses will significantly degrade the cell performance.

cond-mat.mtrl-sci↗

arXiv2016

Heat meets light on the nanoscale

We discuss the state-of-the-art and remaining challenges in the fundamental understanding and technology development for controlling light-matter interactions in nanophotonic environments in and away from thermal equilibrium. The topics covered range from the basics of the thermodynamics of light emission and absorption, to applications in solar-thermal energy generation, thermophotovoltaics, optical refrigeration, personalized cooling technologies, development of coherent incandescent light sources, and spinoptics.

physics.optics↗

arXiv2016

Enhancement and tunability of near-field radiative heat transfer mediated by surface plasmon polaritons in thin plasmonic films

The properties of thermal radiation exchange between hot and cold objects can be strongly modified if they interact in the near field where electromagnetic coupling occurs across gaps narrower than the dominant wavelength of thermal radiation. Using a rigorous fluctuational electrodynamics approach, we predict that ultra-thin films of plasmonic materials can be used to dramatically enhance near-field heat transfer. The total spectrally integrated film-to-film heat transfer is over an order of magnitude larger than between the same materials in bulk form and also exceeds the levels achievable with polar dielectrics such as SiC. We attribute this enhancement to the significant spectral broadening of radiative heat transfer due to coupling between surface plasmon polaritons (SPPs) on both sides of each thin film. We show that the radiative heat flux spectrum can be further shaped by the choice of the substrate onto which the thin film is deposited. In particular, substrates supporting surface phonon polaritons (SPhP) strongly modify the heat flux spectrum owing to the interactions between SPPs on thin films and SPhPs of the substrate. The use of thin film phase change materials on polar dielectric substrates allows for dynamic switching of the heat flux spectrum between SPP-mediated and SPhP-mediated peaks.

physics.optics↗

arXiv2016

Some Results on the Regularization of LSQR for Large-Scale Discrete Ill-Posed Problems

LSQR, a Lanczos bidiagonalization based Krylov subspace iterative method, and its mathematically equivalent CGLS applied to normal equations system, are commonly used for large-scale discrete ill-posed problems. It is well known that LSQR and CGLS have regularizing effects, where the number of iterations plays the role of the regularization parameter. However, it has long been unknown whether the regularizing effects are good enough to find best possible regularized solutions. Here a best possible regularized solution means that it is at least as accurate as the best regularized solution obtained by the truncated singular value decomposition (TSVD) method. In this paper, we establish bounds for the distance between the $k$-dimensional Krylov subspace and the $k$-dimensional dominant right singular space. They show that the Krylov subspace captures the dominant right singular space better for severely and moderately ill-posed problems than for mildly ill-posed problems. Our general conclusions are that LSQR has better regularizing effects for the first two kinds of problems than for the third kind, and a hybrid LSQR with additional regularization is generally needed for mildly ill-posed problems. Exploiting the established bounds, we derive an estimate for the accuracy of the rank $k$ approximation generated by Lanczos bidiagonalization. Numerical experiments illustrate that the regularizing effects of LSQR are good enough to compute best possible regularized solutions for severely and moderately ill-posed problems, stronger than our theory predicts, but they are not for mildly ill-posed problems and additional regularization is needed.

math.NA↗

arXiv2016

On Regularizing Effects of MINRES and MR-II for Large-Scale Symmetric Discrete Ill-Posed Problems

For large scale symmetric discrete ill-posed problems, MINRES and MR-II are often used iterative regularization solvers. We call a regularized solution best possible if it is at least as accurate as the best regularized solution obtained by the truncated singular value decomposition (TSVD) method. In this paper, we analyze their regularizing effects and establish the following results: (i) the filtered SVD expression are derived for the regularized solutions by MINRES; (ii) a hybrid MINRES that uses explicit regularization within projected problems is needed to compute a best possible regularized solution to a given ill-posed problem; (iii) the $k$th iterate by MINRES is more accurate than the $(k-1)$th iterate by MR-II until the semi-convergence of MINRES, but MR-II has globally better regularizing effects than MINRES; (iv) bounds are obtained for the 2-norm distance between an underlying $k$-dimensional Krylov subspace and the $k$-dimensional dominant eigenspace. They show that MR-II has better regularizing effects for severely and moderately ill-posed problems than for mildly ill-posed problems, and a hybrid MR-II is needed to get a best possible regularized solution for mildly ill-posed problems; (v) bounds are derived for the entries generated by the symmetric Lanczos process that MR-II is based on, showing how fast they decay. Numerical experiments confirm our assertions. Stronger than our theory, the regularizing effects of MR-II are experimentally shown to be good enough to obtain best possible regularized solutions for severely and moderately ill-posed problems.

math.NA↗

arXiv2015

Mirzakhani's recursion formula on Weil-Petersson volume and applications

We give an overview of the proof for Mirzakhani's volume recursion for the Weil-Petersson volumes of the moduli spaces of genus $g$ hyperbolic surfaces with $n$ labeled geodesic boundary components, and her application of this recursion to Witten's conjecture and the study of simple geodesic length spectrum growth rates.

math.GT↗

arXiv2015

Macroscopic and direct light propulsion of bulk graphene material

It has been a great challenge to achieve the direct light manipulation of matter on a bulk scale. In this work, the direct light propulsion of matter was observed on a macroscopic scale for the first time using a bulk graphene based material. The unique structure and properties of graphene and the morphology of the bulk graphene material make it capable of not only absorbing light at various wavelengths but also emitting energetic electrons efficiently enough to drive the bulk material following Newtonian mechanics. Thus, the unique photonic and electronic properties of individual graphene sheets are manifested in the response of the bulk state. These results offer an exciting opportunity to bring about bulk scale light manipulation with the potential to realize long-sought proposals in areas such as the solar sail and space transportation driven directly by sunlight.

physics.optics↗

arXiv2015

Thin-film 'Thermal Well' Emitters and Absorbers for High-Efficiency Thermophotovoltaics

A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems by using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell, strong spectral selectivity in both thermal emission and absorption can be achieved by confining photons in trapped waveguide modes inside the thin-films that act as thermal analogs to quantum wells. Simultaneously, photo-excited carriers travel shorter distances across the thin-films reducing bulk recombination losses resulting in a lower saturation current in the PV cell. We predict a TPV efficiency enhancement with near-field coupling between the thermal emitter and the PV cell of up to 38.7% using a germanium (Ge) emitter at 1000 K and a gallium antimonide (GaSb) cell with optimized thicknesses separated by 100 nm. Even in the far-field limit, the efficiency is predicted to reach 31.5%, which is an order of magnitude higher than the Shockley Queisser limit of 1.6% for a bulk GaSb cell and a blackbody emitter at 1000 K. The proposed design approach does not require nanoscale patterning of the emitter and PV cell surfaces, but instead offers a simple low-cost solution to improve the performance of a thermophotovoltaic system.

physics.optics↗

arXiv2015

Some Results on Regularization of LSQR and CGLS for Large-Scale Discrete Ill-Posed Problems

For large-scale discrete ill-posed problems, LSQR, a Lanczos bidiagonalization process based Krylov method, is most often used. It is well known that LSQR has natural regularizing properties, where the number of iterations plays the role of the regularization parameter. In this paper, for severely and moderately ill-posed problems, we establish quantitative bounds for the distance between the $k$-dimensional Krylov subspace and the subspace spanned by $k$ dominant right singular vectors. They show that the $k$-dimensional Krylov subspace may capture the $k$ dominant right singular vectors for severely and moderately ill-posed problems, but it seems not the case for mildly ill-posed problems. These results should be the first step towards to estimating the accuracy of the rank-$k$ approximation generated by Lanczos bidiagonalization. We also derive some other results, which help further understand the regularization effects of LSQR. We draw to a conclusion that a hybrid LSQR should generally be used for mildly ill-posed problems. We report numerical experiments to confirm our theory. We present more definitive and general observed phenomena, which will derive more research.

math.NA↗

arXiv2014

Simple geodesics and Markoff quads

The action of the mapping class group of the thrice-punctured projective plane on its $\mathrm{GL}(2,\mathbb{C})$ character variety produces an algorithm for generating the simple length spectra of quasi-Fuchsian thrice-punctured projective planes. We apply this algorithm to quasi-Fuchsian representations of the corresponding fundamental group to prove: a sharp upper-bound for the length of its shortest geodesic, a McShane identity and the surprising result of non-polynomial growth for the number of simple closed geodesic lengths.

math.GT↗

arXiv2013

Towards a New Science of a Clinical Data Intelligence

In this paper we define Clinical Data Intelligence as the analysis of data generated in the clinical routine with the goal of improving patient care. We define a science of a Clinical Data Intelligence as a data analysis that permits the derivation of scientific, i.e., generalizable and reliable results. We argue that a science of a Clinical Data Intelligence is sensible in the context of a Big Data analysis, i.e., with data from many patients and with complete patient information. We discuss that Clinical Data Intelligence requires the joint efforts of knowledge engineering, information extraction (from textual and other unstructured data), and statistics and statistical machine learning. We describe some of our main results as conjectures and relate them to a recently funded research project involving two major German university hospitals.

cs.CY↗