arXiv subjects

Yi Guo

Publications and source records attributed to Yi Guo.

At least 163 records · Page 9Linked to original sources

arXiv2019

Fleetwide data-enabled reliability improvement of wind turbines

Wind farms are an indispensable driver toward renewable and nonpolluting energy resources. However, as ideal sites are limited, placement in remote and challenging locations results in higher logistics costs and lower average wind speeds. Therefore, it is critical to increase the reliability of the turbines to reduce maintenance costs. Robust implementation requires a thorough understanding of the loads subject to the turbine's control. Yet, such dynamically changing multidimensional loads are uncommon with other machinery, and generally underresearched. Therefore, a multitiered approach is proposed to investigate the load spectrum occurring in wind farms. Our approach relies on both fundamental research using controllable test rigs, as well as analyses of real-world loading conditions in high-frequency supervisory control and data acquisition data. A method is introduced to detect operational zones in wind farm data and link them with load distributions. Additionally, while focused research further investigates the load spectrum, a method is proposed that continuously optimizes the farm's control protocols without the need to fully understand the loads that occur. A case of gearbox failure is investigated based on a vast body of past experiments and suspect loads are identified. Starting from this evidence on the cause and effects of dynamic loads, the potential of our methods is shown by analyzing real-world farm loading conditions on a steady-state case of wake and developing a preventive row-based control protocol for a case of cascading emergency brakes induced by a storm.

eess.SY↗

arXiv2019

A Performance and Stability Analysis of Low-inertia Power Grids with Stochastic System Inertia

Traditional synchronous generators with rotational inertia are being replaced by low-inertia renewable energy resources (RESs) in many power grids and operational scenarios. Due to emerging market mechanisms, inherent variability of RESs, and existing control schemes, the resulting system inertia levels can not only be low but also markedly time-varying. In this paper, we investigate performance and stability of low-inertia power systems with stochastic system inertia. In particular, we consider system dynamics modelled by a linearized stochastic swing equation, where stochastic system inertia is regarded as multiplicative noise. The $\mathcal{H}_2$ norm is used to quantify the performance of the system in the presence of persistent disturbances or transient faults. The performance metric can be computed by solving a generalized Lyapunov equation, which has fundamentally different characteristics from systems with only additive noise. For grids with uniform inertia and damping parameters, we derive closed-form expressions for the $\mathcal{H}_2$ norm of the proposed stochastic swing equation. The analysis gives insights into how the $\mathcal{H}_2$ norm of the stochastic swing equation depends on 1) network topology; 2) system parameters; and 3) distribution parameters of disturbances. A mean-square stability condition is also derived. Numerical results provide additional insights for performance and stability of the stochastic swing equation.

math.OC↗

arXiv2018

Towards the growth of single-crystal boron nitride monolayer on Cu

Atom-layered hexagonal boron nitride (hBN), with excellent stability, flat surface and large bandgap, has been reported to be the best 2D insulator to open up the great possibilities for exciting potential applications in electronics, optoelectronics and photovoltaics. The ability to grow high-quality large single crystals of hBN is at the heart for those applications, but the size of single-crystal 2D BN is less than a millimetre till now. Here, we report the first epitaxial growth of a 10*10 cm2 single-crystal hBN monolayer on a low symmetry Cu(110) "vicinal surface". The growth kinetics, unidirectional alignment and seamless stitching of hBN domains are unambiguously illustrated using centimetre- to the atomic-scale characterization techniques. The findings in this work are expected to significantly boost the massive applications of 2D materials-based devices, and also pave the way for the epitaxial growth of broad non-centrosymmetric 2D materials.

cond-mat.mtrl-sci↗

arXiv2018

Data-based Distributionally Robust Stochastic Optimal Power Flow, Part II: Case studies

This is the second part of a two-part paper on data-based distributionally robust stochastic optimal power flow (OPF). The general problem formulation and methodology have been presented in Part I [1]. Here, we present extensive numerical experiments in both distribution and transmission networks to illustrate the effectiveness and flexibility of the proposed methodology for balancing efficiency, constraint violation risk, and out-of-sample performance. On the distribution side, the method mitigates overvoltages due to high photovoltaic penetration using local energy storage devices. On the transmission side, the method reduces N-1 security line flow constraint risks due to high wind penetration using reserve policies for controllable generators. In both cases, the data-based distributionally robust model predictive control (MPC) algorithm explicitly utilizes forecast error training datasets, which can be updated online. The numerical results illustrate inherent tradeoffs between the operational costs, risks of constraints violations, and out-of-sample performance, offering systematic techniques for system operators to balance these objectives.

math.OC↗

arXiv2018

Data-based Distributionally Robust Stochastic Optimal Power Flow, Part I: Methodologies

We propose a data-based method to solve a multi-stage stochastic optimal power flow (OPF) problem based on limited information about forecast error distributions. The framework explicitly combines multi-stage feedback policies with any forecasting method and historical forecast error data. The objective is to determine power scheduling policies for controllable devices in a power network to balance operational cost and conditional value-at-risk (CVaR) of device and network constraint violations. These decisions include both nominal power schedules and reserve policies, which specify planned reactions to forecast errors in order to accommodate fluctuating renewable energy sources. Instead of assuming the uncertainties across the networks follow prescribed probability distributions, we consider ambiguity sets of distributions centered around a finite training dataset. By utilizing the Wasserstein metric to quantify differences between the empirical data-based distribution and the real unknown data-generating distribution, we formulate a multi-stage distributionally robust OPF problem to compute optimal control policies that are robust to both forecast errors and sampling errors inherent in the dataset. Two specific data-based distributionally robust stochastic OPF problems are proposed for distribution networks and transmission systems.

math.OC↗

arXiv2018

Ocean Plume Tracking with Unmanned Surface Vessels: Algorithms and Experiments

Pollution plume monitoring using autonomous vehicles is important due to the adverse effect of pollution plumes on the environment and associated monetary losses. Using the advection-diffusion plume dispersion model, we present a control law design to track dynamic concentration level curves. We also present a gradient and divergence estimation method to enable this control law from concentration measurement only. We then present the field testing results of the control law to track concentration level curves in a plume generated using Rhodamine dye as a pollution surrogate in a near-shore marine environment. These plumes are then autonomously tracked using an unmanned surface vessel equipped with fluorometer sensors. Field experimental results are shown to evaluate the performance of the controller, and complexities of field experiments in real-world marine environments are discussed in the paper.

eess.SP↗

arXiv2018

Pedestrian-Robot Interaction Experiments in an Exit Corridor

The study of human-robot interaction (HRI) has received increasing research attention for robot navigation in pedestrian crowds. In this paper, we present empirical study of pedestrian-robot interaction in an uni-directional exit corridor. We deploy a mobile robot moving in a direction perpendicular to that of the pedestrian flow, and install a pedestrian motion tracking system to record the collective motion. We analyze both individual and collective motion of pedestrians, and measure the effect of the robot motion on the overall pedestrian flow. The experimental results show the effect of passive HRI, where the pedestrians' overall speed is slowed down in the presence of the robot, and the faster the robot moves, the lower the average pedestrian velocity becomes. Experiment results show qualitative consistency of the collective HRI effect with simulation results that was previously reported. The study can be used to guide future design of robot-assisted pedestrian evacuation algorithms.

cs.RO↗

arXiv2018

Stochastic Optimal Power Flow Based on Data-Driven Distributionally Robust Optimization

We propose a data-driven method to solve a stochastic optimal power flow (OPF) problem based on limited information about forecast error distributions. The objective is to determine power schedules for controllable devices in a power network to balance operation cost and conditional value-at-risk (CVaR) of device and network constraint violations. These decisions include scheduled power output adjustments and reserve policies, which specify planned reactions to forecast errors in order to accommodate fluctuating renewable energy sources. Instead of assuming the uncertainties across the networks follow prescribed probability distributions, we assume the distributions are only observable through a finite training dataset. By utilizing the Wasserstein metric to quantify differences between the empirical data-based distribution and the real data-generating distribution, we formulate a distributionally robust optimization OPF problem to search for power schedules and reserve policies that are robust to sampling errors inherent in the dataset. A simple numerical example illustrates inherent tradeoffs between operation cost and risk of constraint violation, and we show how our proposed method offers a data-driven framework to balance these objectives.

math.OC↗

arXiv2017

Tracer Kinetic Models as Temporal Constraints during DCE-MRI reconstruction

Purpose: To apply tracer kinetic models as temporal constraints during reconstruction of under-sampled dynamic contrast enhanced (DCE) MRI. Methods: A library of concentration v.s time profiles is simulated for a range of physiological kinetic parameters. The library is reduced to a dictionary of temporal bases, where each profile is approximated by a sparse linear combination of the bases. Image reconstruction is formulated as estimation of concentration profiles and sparse model coefficients with a fixed sparsity level. Simulations are performed to evaluate modeling error, and error statistics in kinetic parameter estimation in presence of noise. Retrospective under-sampling experiments are performed on a brain tumor DCE digital reference object (DRO) at different signal to noise levels (SNR=20-40) at (k-t) space under-sampling factor (R=20), and 12 brain tumor in- vivo 3T datasets at (R=20-40). The approach is compared against an existing compressed sensing based temporal finite-difference (tFD) reconstruction approach. Results: Simulations demonstrate that sparsity levels of 2 and 3 model the library profiles from the Patlak and extended Tofts-Kety (ETK) models, respectively. Noise sensitivity analysis showed equivalent kinetic parameter estimation error statistics from noisy concentration profiles, and model approximated profiles. DRO based experiments showed good fidelity in recovery of kinetic maps from 20-fold under- sampled data at SNRs between 10-30. In-vivo experiments demonstrated reduced bias and uncertainty in kinetic mapping with the proposed approach compared to tFD at R>=20. Conclusions: Tracer kinetic models can be applied as temporal constraints during DCE-MRI reconstruction, enabling more accurate reconstruction from under- sampled data. The approach is flexible, can use several kinetic models, and does not require tuning of regularization parameters.

physics.med-ph↗

arXiv2017

Efficient Sparse Subspace Clustering by Nearest Neighbour Filtering

Sparse Subspace Clustering (SSC) has been used extensively for subspace identification tasks due to its theoretical guarantees and relative ease of implementation. However SSC has quadratic computation and memory requirements with respect to the number of input data points. This burden has prohibited SSCs use for all but the smallest datasets. To overcome this we propose a new method, k-SSC, that screens out a large number of data points to both reduce SSC to linear memory and computational requirements. We provide theoretical analysis for the bounds of success for k-SSC. Our experiments show that k-SSC exceeds theoretical expectations and outperforms existing SSC approximations by maintaining the classification performance of SSC. Furthermore in the spirit of reproducible research we have publicly released the source code for k-SSC

cs.CV↗

arXiv2017

Tractable Clustering of Data on the Curve Manifold

In machine learning it is common to interpret each data point as a vector in Euclidean space. However the data may actually be functional i.e.\ each data point is a function of some variable such as time and the function is discretely sampled. The naive treatment of functional data as traditional multivariate data can lead to poor performance since the algorithms are ignoring the correlation in the curvature of each function. In this paper we propose a tractable method to cluster functional data or curves by adapting the Euclidean Low-Rank Representation (LRR) to the curve manifold. Experimental evaluation on synthetic and real data reveals that this method massively outperforms prior clustering methods in both speed and accuracy when clustering functional data.

cs.CV↗

arXiv2017

Collaborative Low-Rank Subspace Clustering

In this paper we present Collaborative Low-Rank Subspace Clustering. Given multiple observations of a phenomenon we learn a unified representation matrix. This unified matrix incorporates the features from all the observations, thus increasing the discriminative power compared with learning the representation matrix on each observation separately. Experimental evaluation shows that our method outperforms subspace clustering on separate observations and the state of the art collaborative learning algorithm.

cs.CV↗

arXiv2016

Matrix Neural Networks

Traditional neural networks assume vectorial inputs as the network is arranged as layers of single line of computing units called neurons. This special structure requires the non-vectorial inputs such as matrices to be converted into vectors. This process can be problematic. Firstly, the spatial information among elements of the data may be lost during vectorisation. Secondly, the solution space becomes very large which demands very special treatments to the network parameters and high computational cost. To address these issues, we propose matrix neural networks (MatNet), which takes matrices directly as inputs. Each neuron senses summarised information through bilinear mapping from lower layer units in exactly the same way as the classic feed forward neural networks. Under this structure, back prorogation and gradient descent combination can be utilised to obtain network parameters efficiently. Furthermore, it can be conveniently extended for multimodal inputs. We apply MatNet to MNIST handwritten digits classification and image super resolution tasks to show its effectiveness. Without too much tweaking MatNet achieves comparable performance as the state-of-the-art methods in both tasks with considerably reduced complexity.

cs.LG↗

arXiv2016

Low-rank Multi-view Clustering in Third-Order Tensor Space

The plenty information from multiple views data as well as the complementary information among different views are usually beneficial to various tasks, e.g., clustering, classification, de-noising. Multi-view subspace clustering is based on the fact that the multi-view data are generated from a latent subspace. To recover the underlying subspace structure, the success of the sparse and/or low-rank subspace clustering has been witnessed recently. Despite some state-of-the-art subspace clustering approaches can numerically handle multi-view data, by simultaneously exploring all possible pairwise correlation within views, the high order statistics is often disregarded which can only be captured by simultaneously utilizing all views. As a consequence, the clustering performance for multi-view data is compromised. To address this issue, in this paper, a novel multi-view clustering method is proposed by using \textit{t-product} in third-order tensor space. Based on the circular convolution operation, multi-view data can be effectively represented by a \textit{t-linear} combination with sparse and low-rank penalty using "self-expressiveness". Our extensive experimental results on facial, object, digits image and text data demonstrate that the proposed method outperforms the state-of-the-art methods in terms of many criteria.

cs.CV↗

arXiv2016

Probabilistic Human Mobility Model in Indoor Environment

Understanding human mobility is important for the development of intelligent mobile service robots as it can provide prior knowledge and predictions of human distribution for robot-assisted activities. In this paper, we propose a probabilistic method to model human motion behaviors which is determined by both internal and external factors in an indoor environment. While the internal factors are represented by the individual preferences, aims and interests, the external factors are indicated by the stimulation of the environment. We model the randomness of human macro-level movement, e.g., the probability of visiting a specific place and staying time, under the Bayesian framework, considering the influence of both internal and external variables. We use two case studies in a shopping mall and in a college student dorm building to show the effectiveness of our proposed probabilistic human mobility model. Real surveillance camera data are used to validate the proposed model together with survey data in the case study of student dorm.

cs.HC↗

arXiv2016

Neighborhood Preserved Sparse Representation for Robust Classification on Symmetric Positive Definite Matrices

Due to its promising classification performance, sparse representation based classification(SRC) algorithm has attracted great attention in the past few years. However, the existing SRC type methods apply only to vector data in Euclidean space. As such, there is still no satisfactory approach to conduct classification task for symmetric positive definite (SPD) matrices which is very useful in computer vision. To address this problem, in this paper, a neighborhood preserved kernel SRC method is proposed on SPD manifolds. Specifically, by embedding the SPD matrices into a Reproducing Kernel Hilbert Space (RKHS), the proposed method can perform classification on SPD manifolds through an appropriate Log-Euclidean kernel. Through exploiting the geodesic distance between SPD matrices, our method can effectively characterize the intrinsic local Riemannian geometry within data so as to well unravel the underlying sub-manifold structure. Despite its simplicity, experimental results on several famous database demonstrate that the proposed method achieves better classification results than the state-of-the-art approaches.

cs.CV↗

arXiv2016

Low-Rank Representation over the Manifold of Curves

In machine learning it is common to interpret each data point as a vector in Euclidean space. However the data may actually be functional i.e.\ each data point is a function of some variable such as time and the function is discretely sampled. The naive treatment of functional data as traditional multivariate data can lead to poor performance since the algorithms are ignoring the correlation in the curvature of each function. In this paper we propose a method to analyse subspace structure of the functional data by using the state of the art Low-Rank Representation (LRR). Experimental evaluation on synthetic and real data reveals that this method massively outperforms conventional LRR in tasks concerning functional data.

cs.CV↗

arXiv2016

Kernel Sparse Subspace Clustering on Symmetric Positive Definite Manifolds

Sparse subspace clustering (SSC), as one of the most successful subspace clustering methods, has achieved notable clustering accuracy in computer vision tasks. However, SSC applies only to vector data in Euclidean space. As such, there is still no satisfactory approach to solve subspace clustering by ${\it self-expressive}$ principle for symmetric positive definite (SPD) matrices which is very useful in computer vision. In this paper, by embedding the SPD matrices into a Reproducing Kernel Hilbert Space (RKHS), a kernel subspace clustering method is constructed on the SPD manifold through an appropriate Log-Euclidean kernel, termed as kernel sparse subspace clustering on the SPD Riemannian manifold (KSSCR). By exploiting the intrinsic Riemannian geometry within data, KSSCR can effectively characterize the geodesic distance between SPD matrices to uncover the underlying subspace structure. Experimental results on two famous database demonstrate that the proposed method achieves better clustering results than the state-of-the-art approaches.

cs.CV↗