arXiv subjects

Ye Zou

Publications and source records attributed to Ye Zou.

8 recordsLinked to original sources

arXiv2026

Alternative Lattice Design for the STCF Collider Rings

The Super Tau-Charm Facility (STCF) is a proposed high-luminosity electron-positron collider operating in the beam energy range of 1-3.5 GeV, targeting a peak luminosity larger than $0.5\times10^{35}\ \mathrm{cm^{-2}s^{-1}}$ at 2 GeV. In this regime, the combination of beam-beam interaction in the crab-waist scheme and low beam energy imposes stringent constraints on dynamic aperture, momentum acceptance, and Touschek lifetime. In this paper, we present an alternative one-fold lattice design for the STCF collider rings, developed within a systematic optimization framework. The approach consists of three stages: (i) lattice-agnostic global parameter optimization using a parameter optimization model that consistently incorporates luminosity performance, beam-beam limits, and collective effects; (ii) optics design based on a compact interaction region with local chromatic correction and crab-waist sextupoles; and (iii) global nonlinear optimization combining analysis-driven methods and tracking-based refinement. The optimized lattice achieves the more ambitious luminosity of $1\times10^{35}\ \mathrm{cm^{-2}s^{-1}}$ while maintaining a Touschek lifetime of about 600 s at 2 GeV, with sufficient dynamic aperture and momentum acceptance for stable operation. The results highlight the critical role of local nonlinear control in the interaction region and demonstrate that the proposed optimization strategy provides an effective and general methodology for the design of high-luminosity low-energy colliders.

physics.acc-ph↗

arXiv2025

Crab-waist interaction region design and integration for the Super Tau-Charm Facility

The Super Tau-Charm Facility (STCF) is a new-generation $e^+e^-$ collider proposed in China, designed to operate in the center-of-mass (CoM) energy range of 2-7 GeV. To achieve the design luminosity exceeding 5*10^34 cm^-2s^-1 at the optimal CoM energy of 4 GeV, a large crossing angle combined with the crab-waist correction scheme is adopted. However, this scheme introduces strong nonlinearities in the interaction region (IR) due to the extremely low vertical beta function of beta_y* <=1 mm, which significantly limits dynamic and momentum apertures of the collider ring. This paper presents a comprehensive modular optics design that addresses these challenges through several key features: 1) local chromaticity correction up to third order to enhance momentum bandwidth; 2) exact -I transformation between chromatic sextupole pairs for nonlinear cancellation; 3) minimization of the dispersion invariant along the IR to improve local momentum acceptance; 4) optimized beta functions at crab sextupole locations to reduce strength requirements and associated nonlinearities. Resonance driving terms analysis confirms effective suppression of geometric aberrations while preserving the intended crab-waist effects. When integrated into the collider ring, the design achieves a Touschek lifetime exceeding 300 s at beam energy of 2 GeV, meeting STCF requirements. The impact of fringe fields from superconducting quadrupoles is mitigated using octupole correctors, and detector solenoid effects are fully suppressed via local anti-solenoid compensation. Furthermore, the defined machine-detector interface layout ensures minimal synchrotron radiation background at the IP beryllium chamber, while ultra-high vacuum conditions are required to suppress beam-gas background. This IR design represents the current optimal solution for STCF and has been incorporated into the project's conceptual design report.

physics.acc-ph↗

arXiv2025

Conceptual Design Report of Super Tau-Charm Facility: The Accelerator

Electron-positron colliders operating in the GeV region of center-of-mass energies or the Tau-Charm energy region, have been proven to enable competitive frontier research, due to its several unique features. With the progress of high energy physics in the last two decades, a new-generation Tau-Charm factory, Super Tau Charm Facility (STCF) has been actively promoting by the particle physics community in China. STCF holds great potential to address fundamental questions such as the essence of color confinement and the matter-antimatter asymmetry in the universe in the next decades. The main design goals of STCF are with a center-of-mass energy ranging from 2 to 7 GeV and a peak luminosity surpassing 5*10^34 cm^-2s^-1 that is optimized at a center-of-mass energy of 4 GeV, which is about 50 times that of the currently operating Tau-Charm factory - BEPCII. The STCF accelerator is composed of two main parts: a double-ring collider with the crab-waist collision scheme and an injector that provides top-up injections for both electron and positron beams. As a typical third-generation electron-positron circular collider, the STCF accelerator faces many challenges in both accelerator physics and technology. In this paper, the conceptual design of the STCF accelerator complex is presented, including the ongoing efforts and plans for technological R&D, as well as the required infrastructure. The STCF project aims to secure support from the Chinese central government for its construction during the 15th Five-Year Plan (2026-2030) in China.

physics.acc-ph↗

arXiv2025

Impact of coherent wiggler radiation impedance in Tau-Charm factories

Coherent synchrotron radiation (CSR) has long been recognized as a significant source of longitudinal impedance driving microwave instability in electron storage rings. In the pursuit of higher luminosity, next-generation circular $e^+e^-$ colliders operating in the few-GeV energy range, such as B-factories and Tau-Charm factories, are being designed with low-emittance beams and high beam currents. Damping wigglers are commonly introduced to reduce damping times and control beam emittance. In this study, we systematically investigate the impact of coherent wiggler radiation (CWR), a specific form of CSR generated within wigglers, on beam stability in Tau-Charm factories. We revisit the threshold conditions for CWR-induced microwave instability and evaluate its effects under realistic lattice configurations of collider rings. Furthermore, we examine theoretical models of longitudinal CWR impedance and identify improved formulations that better capture its influence. As an illustrative example, the developed CWR impedance models are applied to simulate beam stability in the Super Tau-Charm Facility currently under design in China.

physics.acc-ph↗

arXiv2025

Optics design of the Super Tau-Charm Facility collider rings

The Super Tau-Charm Facility (STCF), China's next-generation electron-positron collider, targets an unprecedented luminosity exceeding 5x10^34 cm^-2 s^-1 at a center-of-mass energy of 4 GeV. The implementation of a submillimeter vertical beta function at interaction point (< 1 mm) and crab-waist collision scheme in this low-energy regime introduces critical challenges through severe nonlinear effects that constrain dynamic aperture and degrade Touschek lifetime. To address these constraints, we propose a novel quasi-two-fold symmetric lattice design integrating several synergistic features: Linear optics optimization minimizing the H-invariant around the ring to maximize local momentum acceptance (LMA); Up to third-order of local chromaticity correction in the interaction region combined with second-order achromatic arc optics, enhancing off-momentum beam dynamics; Configured FODO arc structure with interleaved sextupole groups satisfying -I transformation, suppressing third-order geometric aberrations while optimizing Montague function distributions; Advanced final focus system integrating chromatic sextupoles, crab sextupoles, and strategically positioned octupoles to counteract final quadrupole fringe fields. Furthermore, we develop a multi-objective genetic algorithm using the in-house toolkit PAMKIT to simultaneously optimize 46 sextupole families, maximizing both dynamic aperture and momentum bandwidth. Optics performance is evaluated under error conditions with appropriate corrections, ensuring robust beam dynamics.

physics.acc-ph↗

arXiv2016

Collimation method studies for next-generation hadron colliders

In order to handle extremely-high stored energy in future proton-proton colliders, an extremely high-efficiency collimation system is required for safe operation. At LHC, the major limiting locations in terms of particle losses on superconducting (SC) magnets are the dispersion suppressors (DS) downstream of the transverse collimation insertion. These losses are due to the protons experiencing single diffractive interactions in the primary collimators. How to solve this problem is very important for future proton-proton colliders, such as the FCC-hh and SPPC. In this article, a novel method is proposed, which arranges both the transverse and momentum collimation in the same long straight section. In this way, the momentum collimation system can clean those particles related to the single diffractive effect. The effectiveness of the method has been confirmed by multi-particle simulations. In addition, SC quadrupoles with special designs such as enlarged aperture and good shielding are adopted to enhance the phase advance in the transverse collimation section, so that tertiary collimators can be arranged to clean off the tertiary halo which emerges from the secondary collimators and improve the collimation efficiency. With one more collimation stage in the transverse collimation, the beam losses in both the momentum collimation section and the experimental regions can be largely reduced. Multi-particle simulation results with the MERLIN code confirm the effectiveness of the collimation method. At last, we provide a protection scheme of the SC magnets in the collimation section. The FLUKA simulations show that by adding some special protective collimators in front of the magnets, the maximum power deposition in the SC coils is reduced dramatically, which is proven to be valid for protecting the SC magnets from quenching.

physics.acc-ph↗

arXiv2016

Resonant slow extraction in synchrotrons by using anti-symmetric sextupole fields

This paper proposes a novel method for resonant slow extraction in synchrotrons by using special anti-symmetric sextupole fields, which can be produced by a special magnet structure. The method has the potential in applications demanding for very stable slow extraction from synchrotrons. Our studies show that the slow extraction at the half-integer resonance by using anti-symmetric sextupole field has some advantages compared to the normal sextupole field, and the latter is widely used in the slow extraction method. One of them is that it can work at a more distant tune from the resonance, so that it can reduce significantly the intensity variation of the extracted beam which is mainly caused by the ripples of magnet power supplies. The studies by both the Hamiltonian theory and numerical simulations show that the stable region at the proximity of the half-integer resonance by anti-symmetric sextupole field is much smaller and flatter than the one by standard sextupole field at the third-order resonance. By gradually increasing the field strength, the beam can be extracted with intensity more homogeneous than by the usual third-order resonant method, in the means of both smaller intensity variation and spike in the beginning spill. Similar to the case with a normal sextupole, we derive an empirical formula for the area of the stable region with an anti-symmetric sextupole. One can find that with the same field strength and the same tune distance to the resonance, the area of stable region or the change of the area due to the working point variation in the case of anti-symmetric sextupole is about 1/14 of the one in the case of standard sextupole. The detailed studies including beam dynamic behaviors at the proximity of other resonances, influence of 2-D field error, half-integer stop-band, and resonant slow extraction by using quadrupole field have also been presented.

physics.acc-ph↗

arXiv2015

Concept for a Future Super Proton-Proton Collider

Following the discovery of the Higgs boson at LHC, new large colliders are being studied by the international high-energy community to explore Higgs physics in detail and new physics beyond the Standard Model. In China, a two-stage circular collider project CEPC-SPPC is proposed, with the first stage CEPC (Circular Electron Positron Collier, a so-called Higgs factory) focused on Higgs physics, and the second stage SPPC (Super Proton-Proton Collider) focused on new physics beyond the Standard Model. This paper discusses this second stage.

physics.acc-ph↗